Search

This paper describes phenomena associated to the microstructure, such as the local bending stiffness of the yarns, with a second gradient parameter associated to terms in the energy with higher ord...

International audience; In this paper, we study the anisotropy classes of the fourth order elastic tensors of the relaxed micro-morphic model, also introducing their second order counterpart by using a Voigt-type vector notation. In strong contrast with the usual micromorphic theories, in our relaxed micromorphic model only classical elasticity-tensors with at most 21 independent components are studied together with rotational coupling tensors with at most 6 independent components. We show that in the limit case Lc → 0 (which corresponds to considering very large specimens of a microstructured metamaterial the meso-and micro-coefficients of the relaxed model can be put in direct relation with the macroscopic stiffness of the medium via a fundamental homogenization formula. We also show that a similar homogenization formula is not possible in the case of the standard Mindlin-Eringen-format of the anisotropic micromorphic model. Our results allow us to forecast the successful short term application of the relaxed micromorphic model to the characterization of anisotropic mechanical metamaterials.

In the present paper, the material parameters of the isotropic relaxed micromorphic model derived for a specific metamaterial in a previous contribution are used to model its transmission properties. Specifically, the reflection and transmission coefficients at an interface between a homogeneous solid and the chosen metamaterial are analyzed by using both the relaxed micromorphic model and a direct FEM implementation of the detailed microstructure. The obtained results show an excellent agreement between the transmission spectra derived via our enriched continuum model and those issued by the direct FEM simulation. Such excellent agreement validates the indirect measure of the material parameters and opens the way towards an efficient meta-structural design., Comment: The paper has been already accepted in Mathematics and Mechanics of Solids as it is

International audience; In this paper, we show that the transient waveforms arising from several localised pulses in a micro-structured material can be reproduced by a corresponding generalised continuum of the relaxed micromorphic type. Specifically, we compare the dynamic response of a bounded micro-structured material to that of bounded continua with special kinematic properties: (i) the relaxed micromorphic continuum and (ii) an equivalent Cauchy linear elastic continuum. We show that, while the Cauchy theory is able to describe the overall behaviour of the metastructure only at low frequencies, the relaxed micromorphic model goes far beyond by giving a correct description of the pulse propagation in the frequency band-gap and at frequencies intersecting the optical branches. In addition, we observe a computational time reduction associated with the use of the relaxed micromorphic continuum, compared to the sensible computational time needed to perform a transient computation in a micro-structured domain.

We consider the weighted isotropic relaxed micromorphic model and provide an in depth investigation of the characteristic dispersion curves when the constitutive parameters of the model are varied. The weighted relaxed micromorphic model generalizes the classical relaxed micromorphic model previously introduced by the authors, since it features the Cartan-Lie decomposition of the tensors P,t and Curl P in their dev sym , skew and spherical part. It is shown that the split of the tensor P,t in the micro-inertia provides an independent control of the cut-offs of the optic banches. This is crucial for the calibration of the relaxed micromorphic model on real band-gap metamaterials. Even if the physical interest of the introduction of the split of the tensor Curl P is less evident than in the previous case, we discuss in detail which is its effect on the dispersion curves. Finally, we also provide a complete parametric study involving all the constitutive parameters of the introduced model, so giving rise to an exhaustive panorama of dispersion curves for the relaxed micromorphic model.

In the present contribution we show that the relaxed micromorphic model is the only non-local continuum model which is able to account for the description of band-gaps in metamaterials for which the kinetic energy accounts separately for micro and macro-motions without considering a micro-macro coupling. Moreover, we show that when adding a gradient inertia term which indeed allows for the description of the coupling of the vibrations of the microstructure to the macroscopic motion of the unit cell, other enriched continuum models of the micromorphic type may allow the description of the onset of band-gaps. Nevertheless, the relaxed micromorphic model proves to be yet the most effective enriched continuum model which is able to describe multiple band-gaps in non-local metamaterials., Comment: arXiv admin note: text overlap with arXiv:1607.07385

In this paper the relaxed micromorphic material model for anisotropic elasticity is used to describe the dynamical behavior of a band-gap metamaterial with tetragonal symmetry. Unlike other continuum models (Cauchy, Cosserat, second gradient, classical Mindlin-Eringen micromorphic etc.), the relaxed micromorphic model is endowed to capture the main microscopic and macroscopic characteristics of the targeted metamaterial, namely, stiffness, anisotropy, dispersion and band-gaps. The simple structure of our material model, which simultaneously lives on a micro-, a meso- and a macroscopic scale, requires only the identification of a limited number of frequency-independent and thus truly constitutive parameters, valid for both static and wave-propagation analyses in the plane. The static macro- and micro- parameters are identified by numerical homogenization in static tests on the unit-cell level in [30]. The remaining inertia parameters for dynamical analyses are calibrated on the dispersion curves of the same metamaterial as obtained by a classical Bloch-Floquet analysis for two wave directions. We demonstrate via polar plots that the obtained material parameters describe very well the response of the structural material for all wave directions in the plane, thus covering the complete panorama of anisotropy of the targeted metamaterial., Comment: To appear in Journal of Elasticity

For the recently introduced isotropic-relaxed micromorphic generalized continuum model, we show that, under the assumption of positive-definite energy, planar harmonic waves have real velocity. We also obtain a necessary and sufficient condition for real wave velocity which is weaker than the positive definiteness of the energy. Connections to isotropic linear elasticity and micropolar elasticity are established. Notably, we show that strong ellipticity does not imply real wave velocity in micropolar elasticity, whereas it does in isotropic linear elasticity.

The classical models used for describing the mechanical behavior of woven fabrics do not fully account for the whole set of phenomena that occur during the testing of such materials. This lack of precision is mainly due to the absence of energy terms related to the microstructural properties of the fabric and, in particular, to the bending stiffness of the yarns. The importance of the bending stiffness on the overall mechanical behavior of woven reinforcements, if already essential for the complete description of balanced fabrics, becomes even more important in the case of unbalanced ones. In this paper it is shown that the unbalance in the bending stiffnesses of the warp and weft yarns produces macroscopic effects that are extremely visible: we mention, for example, the asymmetric S-shape of a woven interlock subjected to a Bias Extension Test. We propose to introduce a constrained micromorphic model and, simultaneously, a discrete model that are both able to account for (i) the angle variation between warp and weft tows, (ii) the unbalance in the bending stiffness of the yarns and (iii) the relative slipping of the tows. The introduced constrained micromorphic model is rigorously framed in the spirit of the Principle of Virtual Work for the study of the equilibrium of continuum bodies. A suitable constraint is introduced in such micromorphic model by means of Lagrange multipliers in the strain energy density and the resulting constrained model is seen to be a particular second gradient one. The main advantage of using such constrained micromorphic model is that the kinematical and traction boundary conditions that can be imposed on some sub-portions of the boundary of the considered body take a natural and unique meaning. The discrete model is set up by opportunely interconnecting Euler–Bernoulli beams with different bending stiffnesses in the two directions by means of rotational and translational elastic springs. The main strength of such discrete model is that the slipping of the tows is described in a rather realistic way. Suitable numerical simulations are presented for both the continuum and the discrete models and a comparison between the simulations and the experimental results is performed showing a definitely good agreement.

International audience; The classical continuum models used for the woven fabrics do not fully describe the whole set of phenomena that occur during the testing of those materials. This incompleteness is partially due to the absence of energy terms related to some micro-structural properties of the fabric and, in particular, to the bending stiffness of the yarns. To account for the most fundamental microstructure-related deformation mechanisms occurring in unbalanced interlocks, a second-gradient, hyperelastic, initially orthotropic continuum model is proposed. A constitutive expression for the strain energy density is introduced to account for i) in-plane shear deformations, ii) highly different bending stiffnesses in the warp and weft directions and iii) fictive elonga-tions in the warp and weft directions which eventually describe the relative sliding of the yarns. Numerical simulations which are able to reproduce the experimental behavior of unbalanced carbon interlocks subjected to a Bias Extension Test are presented. In particular, the proposed model captures the macroscopic asymmetric S-shaped deformation of the specimen, as well as the main features of the associated deformation patterns of the yarns at the mesoscopic scale.

In this paper, we propose the first estimate of some elastic parameters of the relaxed micromorphic model on the basis of real experiments of transmission of longitudinal plane waves across an interface separating a classical Cauchy material (steel plate) and a phononic crystal (steel plate with fluid-filled holes). A procedure is set up in order to identify the parameters of the relaxed micromorphic model by superimposing the experimentally based profile of the reflection coefficient (plotted as function of the wave-frequency) with the analogous profile obtained via numerical simulations. We determine five out of six constitutive parameters which are featured by the relaxed micromorphic model in the isotropic case, plus the determination of the micro-inertia parameter. The sixth elastic parameter, namely the Cosserat couple modulusμc, still remains undetermined, since experiments on transverse incident waves are not yet available. A fundamental result of this paper is the estimate of the non-locality intrinsically associated with the underlying microstructure of the metamaterial. We show that the characteristic lengthLcmeasuring the non-locality of the phononic crystal is of the order of13of the diameter of its fluid-filled holes.

International audience; Experimental testing on dry woven fabrics exhibits a complex set of evidences that are difficult to be completely described using classical continuum models. The aim of this paper is to show how the introduction of energy terms related to the micro-deformation mechanisms of the fabric, in particular to the bending stiffness of the yarns, helps in the modeling of the mechanical behavior of this kind of materials. To this aim, a second gradient, hyperelastic, initially orthotropic continuum theory is proposed to model fibrous composite interlocks at finite strains. In particular, the present work explores the relationship between the onset of wrinkling appearing during the simulation of the deep drawing of a woven fabric and the use of a second gradient model. It is shown that the introduction of second gradient terms accounting for the description of in-plane and out-of-plane bending rigidities, decreases the onset of wrinkles during the simulation of deep-drawing. In this work, a quadratic energy, roughly proportional to the square of the curvature of the fibers, is presented and implemented in the simulations. This simple constitutive assumption allows to clearly show the effects of the second gradient energy on both the wrinkling description and the numerical stability of the model. The results obtained in second gradient simulations are descriptive of the experimental evidence of deep drawing whose description is targeted in this work. The present paper provides additional evidence of the fact that first gradient continuum theories alone cannot be considered fully descriptive of the behavior of dry woven composite reinforcements. On the other hand, the proposed second gradient model for fibrous composite reinforcements opens the way both to the more accurate simulation of complex forming processes and to the possibility of controlling the onset of wrinkles.

Computer networks are an endless source of problems and motivations for the Graph Drawing and for the Information Visualization research communities. Graphical representation of computer networks at different abstraction levels are interesting for different types of users. To give only some examples (an interesting survey can be found in [10])

Polyphemus and Hermes [1] are systems for exploring and visualizing computer networks at different abstraction levels. Today’s Internet is organized as Autonomous Systems (AS), each of them groups a set of networks under a single administrative authority (e.g. a private company). Hermes visualizes Internet as a set of ASes and interconnections between them. Polyphemus is a complementary system that is able to look inside an AS and to visualize its networks at the level of the routers and their physical links.

International audience; In this paper we substantiate the claim implicitly made in previous works that the relaxed micromorphic model is the only linear, isotropic, reversibly elastic, nonlocal generalized continuum model able to describe complete band-gaps on a phenomenological level. To this end, we recapitulate the response of the standard Mindlin-Eringen micromorphic model with the full micro-distortion gradient of P, the relaxed micromorphic model depending only on the Curl P of the micro-distortion P, and a variant of the standard micromorphic model in which the curvature depends only on the divergence Div P of the micro distortion. The Div-model has size-effects but the dispersion analysis for plane waves shows the incapability of that model to even produce a partial band gap. Combining the curvature to depend quadratically on Div P and Curl P shows that such a model is similar to the standard Mindlin-Eringen model which can eventually show only a partial band gap.

Rapport de contrat.; This document provides a list of selected network and service management and monitoring tools and components that will be evaluated and/or developed and/or extended and/or deployed within the 6NET management project.