Search

Your search keyword '"Gaillard, Y."' showing total 241 results
Start Over Author "Gaillard, Y."
241 results on '"Gaillard, Y."'

25. MANITOO : Solveur Orienté Objet d'Equations Non Linéaires par Méthode Asymptotique Numérique

Author

Lejeune, A., Fabien Béchet, Boudaoud, H., Gaillard, Y., Mathieu, N., Richard, F., Sadoulet- Reboul, E., Pascal Ventura, Potier-Ferry, M., Pascal, Ventura, Franche-Comté Électronique Mécanique, Thermique et Optique - Sciences et Technologies (UMR 6174) (FEMTO-ST), Université de Technologie de Belfort-Montbeliard (UTBM)-Ecole Nationale Supérieure de Mécanique et des Microtechniques (ENSMM)-Université de Franche-Comté (UFC), Université Bourgogne Franche-Comté [COMUE] (UBFC)-Université Bourgogne Franche-Comté [COMUE] (UBFC)-Centre National de la Recherche Scientifique (CNRS), Université de Valenciennes et du Hainaut-Cambrésis (UVHC), Equipe de Recherche sur les Processus Innovatifs (ERPI), Université de Lorraine (UL), Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux (LEM3), Université de Lorraine (UL)-Centre National de la Recherche Scientifique (CNRS)-Arts et Métiers Sciences et Technologies, HESAM Université (HESAM)-HESAM Université (HESAM), Laboratoire d'Automatique, de Mécanique et d'Informatique industrielles et Humaines - UMR 8201 (LAMIH), Université de Valenciennes et du Hainaut-Cambrésis (UVHC)-Centre National de la Recherche Scientifique (CNRS)-INSA Institut National des Sciences Appliquées Hauts-de-France (INSA Hauts-De-France), and Centre National de la Recherche Scientifique (CNRS)-Université de Lorraine (UL)-Arts et Métiers Sciences et Technologies

Subjects
[SPI.ACOU]Engineering Sciences [physics]/Acoustics [physics.class-ph], [SPI]Engineering Sciences [physics], Méthode Asymptotique Numérique, [SPI.ACOU] Engineering Sciences [physics]/Acoustics [physics.class-ph], [SPI] Engineering Sciences [physics], Éléments Finis, Contact, [PHYS.MECA]Physics [physics]/Mechanics [physics], Balance Harmonique, [SPI.MECA]Engineering Sciences [physics]/Mechanics [physics.med-ph], [SPI.MECA] Engineering Sciences [physics]/Mechanics [physics.med-ph]
Abstract

International audience; MANITOO est une implémentation orientée objet en C++ permettant la résolution de problèmes non-linéaires par Méthode Asymptotique Numérique. Principalement dédiée à la simulation par éléments finis en mécanique des milieux continus, on présente ici les principales caractéristiques.

Published
2019

28. Design and development of 100% bio-based high-grade hemp/epoxy composites

Author

François, C., Placet, V., Gaillard, Y., Pourchet, S., Boni, G., Laurent PLASSERAUD, Ouagne, P., Samec, J., Rautiainen, S., Fournier, L., Robert, C., Thomas, C. M., Fontaine, S., Centre National de la Recherche Scientifique - CNRS (FRANCE), Ecole Nationale Supérieure de Chimie de Paris - ENSCP (FRANCE), Institut National Polytechnique de Toulouse - Toulouse INP (FRANCE), Université de Bourgogne - UB (FRANCE), Université de Franche-Comté (FRANCE), Université de Technologie de Belfort-Montbéliard - UTBM (FRANCE), Institut Supérieur de l'Automobile et des Transports - ISAT (FRANCE), PSL Research University (FRANCE), Stockholm University (SWEDEN), Université Bourgogne Franche-Comté - UBFC (FRANCE), and Institut de Recherche de Chimie Paris - IRCP (Paris, France)

Subjects
Bio-based epoxy thermosets, Mécanique des matériaux, Mechanical performances, Hemp fibres, Bio-composite
Abstract

In order to develop 100% bio-based high-grade epoxy composites, in this study, bio-based epoxy thermosets and hemp slivers are processed and characterized by different technologies. Epoxy resins are synthesized from the diglycidylether of Eugenol, extracted from cloves. They are cured with bio-based acid anhydrides. The physicochemical properties of the resulting epoxy resins are characterized using thermogravimetric analyses (TGA), differential scanning calorimetry (DSC), and nanoindentation. The mechanical properties of hemp fibres extracted from the slivers are also determined using tensile tests. After their processing and characterization, these bio-based constituents are then used to manufacture unidirectional composites by thermocompression. Composite specimens are tested under 3-points bending. Preliminary results show a stiffness of about 9 GPa and a strength of approximately 170 MPa for a fibres volume fraction of 22%. These mechanical properties are promising since they make this material competitive to substitute petroleum-based composites in secondary structural applications.

Published
2017

30. NPS collector

Author

Bottinelli, C., primary, Revelut, K., additional, Gaillard, Y., additional, and Bévalot, F., additional

Published
2018
Full Text
View/download PDF

44. Identification of 5-hydroxy-tryptamine (bufotenine) in takini (Brosimum acutifolium Huber subsp acutifolium CC Berg, Moraceae), a shamanic potion used in the Guiana Plateau

Author

Moretti, Christian, Gaillard, Y., Grenand, Pierre, Bevalot, F., and Prevosto, J.M.

Subjects
amerindians, 5 hydroxy tryptamine, hallucinogenic beverage, bufotenine, takini, shamanism
Abstract

This paper is the first thorough analysis of takini, a hallucinogen used by the shamans of several peoples in Suriname, French Guiana, and the region east of the Para in Brazil. The drug is contained in the latex of the Brosimum acutifolium tree, and until now, its psychotropic properties appeared inconsistent with the more general medicinal uses of the tree in the surrounding region. Our chemical and botanical studies reveal that the active ingredient of takini is bufotenine; and that this compound is only contained in the subspecies Brosimum acutifolium Huber subsp. acutifolium C.C. Berg that is found in the same area of the eastern Guianas. (c) 2006 Elsevier Ireland Ltd. All rights reserved.

Published
2006

50. Viscoelastic Properties of Plant Fibers: Dynamic Analysis and Nanoindentation Tests.

Author

Butaud, P., Liu, T., Pelisson, F., Gaillard, Y., Placet, V., Ouisse, M., and Bourbon, G.

Abstract

It is now established that plant fibers are suitable reinforcements to replace or to complete synthetic fibers for composite applications. They have many well-known advantages such as being renewable, biodegradable and having high specific mechanical properties and intrinsic damping properties that can impart attractive benefits to composite materials. When compared to glass and carbon fibers reinforced polymer composites, PFCs exhibit generally higher damping properties. This is commonly attributed to the polymeric nature of the fibers. It could also result from their hierarchical structure and microstructural specificities. Indeed, damping in composite materials is induced by several microscopic level mechanisms related to the viscoelasticity of both matrix and fibers, but also by the fiber/matrix interface and the friction between fibers inside bundles or between layers. The presence of lumen could also play a role. At this stage, the damping source is not well identified, and the design and the optimization of composites, for structural applications, are then difficult. A better knowledge of the physical phenomena involved is therefore necessary. A first approach is proposed using dynamic nanoindentation. Different dynamic loading paths are applied to plant fiber composites. Flax fibers are tested in situ in the composite. Indents were performed using predefined grids. The sinusoidal signal of force and penetration depth as a function of time are post-processed to ensure a reliable determination of the loss factor. Finally, damping maps are plotted. Results allow the variation of elastic and damping properties in the fiber/fiber and fiber/matrix interphases to be quantified and thus to shed new light on the origins of damping in PFCs. In a second time, a specific experimental set-up is developed based on the analysis of the transverse (bending) vibratory response of a fiber clamped at one end, free at the other one. Both forced (using a piezoelectric actuator) or free (using a release of a static constraint) movements can be generated. The loss factor is then identified from the vibration displacement by tracking the fiber free-end recorded with a high-speed camera. Conclusions are drawn on the damping properties of plant fibers compared to synthetic fibers. [ABSTRACT FROM AUTHOR]

Published
2022

Catalog

Books, media, physical & digital resources
See catalog results