Search

Effective drug delivery requires ample dosing at the target tissue while minimizing negative side effects. Drug delivery vehicles such as polymeric nanoparticles (NPs) are often employed to accomplish this challenge. In this work, drug release of numerous drugs from surface eroding polymeric NPs was evaluated in vitro in physiologically relevant pH 5 and neutral buffers. NPs were loaded with paclitaxel, rapamycin, resiquimod, or doxorubicin and made from an FDA approved polyanhydride or from acetalated dextran (Ace-DEX), which has tunable degradation rates based on cyclic acetal coverage (CAC). By varying encapsulate, pH condition, and polymer, a range of distinct drug release profiles were achieved. To model the obtained drug release curves, a mechanistic mathematical model was constructed based on drug diffusion and polymer degradation. The resulting diffusion-erosion model accurately described drug release from the variety of surface eroding NPs. For drug release from varied CAC Ace-DEX NPs, the goodness of fit of the developed diffusion-erosion model was compared to several conventional drug release models. The diffusion-erosion model maintained optimal fit compared to conventional models across a range of conditions. Machine learning was then employed to estimate effective diffusion coefficients for the diffusion-erosion model, resulting in accurate prediction of in vitro release of dexamethasone and 3'3'-cyclic guanosine monophosphate-adenosine monophosphate from Ace-DEX NPs. This predictive modeling has potential to aid in the design of future Ace-DEX formulations where optimized drug release kinetics can lead to a desired therapeutic effect., Competing Interests: Declaration of Competing Interest Drs. Ainslie and Bachelder serve on the advisory board for IMMvention Therapeutix, Inc. Although a financial conflict of interest was identified for management based on the overall scope of the project and its potential benefit to IMMvention Therapeutix, Inc., the research findings included in this publication may not necessarily be related to the interests of IMMvention Therapeutix, Inc., (Copyright © 2022 Elsevier B.V. All rights reserved.)

The current pandemic highlights the need for effective vaccines against respiratory viruses. An ideal vaccine should induce robust and long-lasting responses with high manufacturing scalability. We use an adjuvant comprised of a Stimulator of Interferon Genes (STING) agonist incorporated in a scalable microparticle platform to achieve durable protection against the influenza virus. This formulation overcomes the challenges presented by the cytosolic localization of STING and the hydrophilicity of its agonists. We evaluated a monoaxial formulation of polymeric acetalated dextran microparticles (MPs) to deliver the STING agonist cyclic GMP-AMP (cGAMP) which achieved >10× dose-sparing effects compared to other published work. Efficacy was evaluated in ferrets, a larger animal model of choice for influenza vaccines. cGAMP MPs with recombinant hemagglutinin reduced viral shedding and improved vaccine outcomes compared to a seasonal influenza vaccine. Importantly, sustained protection against a lethal influenza infection was detected a year after a single dose of the vaccine-adjuvant., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Subunit vaccines employing designer antigens such as Computationally Optimized Broadly Reactive Antigen (COBRA) hemagglutinin (HA) hold the potential to direct the immune response toward more effective and broadly-neutralizing targets on the Influenza virus. However, subunit vaccines generally require coadministration with an adjuvant to elicit a robust immune response. One such adjuvant is the stimulator of interferon genes (STING) agonist cyclic dinucleotide 3'3'-cyclic guanosine monophosphate-adenosine monophosphate (cGAMP). We have shown that encapsulation of cGAMP in acetalated dextran (Ace-DEX) microparticles through electrospray results in significantly greater biological activity. Electrospray is a continuous manufacturing process which achieves excellent encapsulation efficiency. However, the throughput of electrospray with a single spray head is limited. Here we report the development of a multiplexed electrospray apparatus with an order of magnitude greater throughput than a single-head apparatus. Physicochemical characterization and evaluation of adjuvant activity in vitro and in vivo indicated that microparticles produced with the higher throughput process are equally suited for use as a potent vaccine adjuvant to induce a balanced immune response to COBRA HA antigens., (Copyright © 2022 Elsevier B.V. All rights reserved.)

The cGAS-cyclic GMP-AMP (cGAMP)-stimulator of IFN genes (STING) pathway induces a powerful type I IFN (IFN-I) response and is a prime candidate for augmenting immunity in cancer immunotherapy and vaccines. IFN-I also has immune-regulatory functions manifested in several autoimmune diseases and is a first-line therapy for relapsing-remitting multiple sclerosis. However, it is only moderately effective and can induce adverse effects and neutralizing Abs in recipients. Targeting cGAMP in autoimmunity is unexplored and represents a challenge because of the intracellular location of its receptor, STING. We used microparticle (MP)-encapsulated cGAMP to increase cellular delivery, achieve dose sparing, and reduce potential toxicity. In the C57BL/6 experimental allergic encephalomyelitis (EAE) model, cGAMP encapsulated in MPs (cGAMP MPs) administered therapeutically protected mice from EAE in a STING-dependent fashion, whereas soluble cGAMP was ineffective. Protection was also observed in a relapsing-remitting model. Importantly, cGAMP MPs protected against EAE at the peak of disease and were more effective than rIFN-β. Mechanistically, cGAMP MPs showed both IFN-I-dependent and -independent immunosuppressive effects. Furthermore, it induced the immunosuppressive cytokine IL-27 without requiring IFN-I. This augmented IL-10 expression through activated ERK and CREB. IL-27 and subsequent IL-10 were the most important cytokines to mitigate autoreactivity. Critically, cGAMP MPs promoted IFN-I as well as the immunoregulatory cytokines IL-27 and IL-10 in PBMCs from relapsing-remitting multiple sclerosis patients. Collectively, this study reveals a previously unappreciated immune-regulatory effect of cGAMP that can be harnessed to restrain T cell autoreactivity., (Copyright © 2021 by The American Association of Immunologists, Inc.)

Also known as electrospray, electrohydrodynamic atomization has been used extensively in the last 15 years to develop polymer-based particles for drug delivery in cell and animal models. More recently, novel core-shell, multi-axial, and other electrospray particles have been developed from an array of polymers for a variety of biomedical applications. This review focuses on electrospray as a novel method of particle fabrication for drug delivery, specifically highlighting the applications of these particle systems in cell culture and animal models while also discussing polymers used for particle fabrication. Applications of electrospray particles to treat glioma, ovarian cancer, and breast cancer are reviewed. Additionally, delivery of antibiotics, gene therapy, and bacterial cells formulated in electrospray particles is discussed. Finally, vaccines as well as drug eluting particles for differentiation of stem cells and tissue engineering are highlighted. The article concludes with a discussion of where the future of electrospray technology can go to strengthen its foothold in the biomedical field., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Immunotherapies have significantly improved cancer patient survival, but response rates are still limited. Thus, novel formulations are needed to expand the breadth of immunotherapies. Pathogen associated molecular patterns (PAMPs) can be used to stimulate an immune response, but several pathogen recognition receptors are located within the cell, making delivery challenging. We have employed the biodegradable polymer acetalated dextran (Ace-DEX) to formulate PAMP microparticles (MPs) in order to enhance intracellular delivery. While treatment with four different PAMP MPs resulted in tumor growth inhibition, cyclic GMP-AMP (cGAMP) MPs were most effective. cGAMP MPs showed anti-tumor efficacy at doses 100-1000 fold lower than published doses of soluble cGAMP in two murine tumor models. Treatment with cGAMP MPs resulted in increased natural killer cell numbers in the tumor environment. Immune cell depletion studies confirmed that NK cells were responsible for the anti-tumor efficacy in an aggressive mouse melanoma model. NK cells and CD8 + T cells were both required for early anti-tumor function in a triple negative breast cancer model. In summary, cGAMP MP treatment results in NK and T cell-dependent anti-tumor immune response., (Copyright © 2019. Published by Elsevier Ltd.)

While highly active antiretroviral therapy (HAART) has significantly reduced mortality rates in patients with human immunodeficiency virus type 1 (HIV-1), its efficacy may be impeded by emergence of drug resistance caused by lack of patient adherence. A therapeutic strategy that requires infrequent drug administration as a result of sustained release of antiretroviral drugs would put less burden on the patient. Long-acting antiretroviral prodrugs for HIV therapy were synthesized through modification of the active drugs, emtricitabine (FTC) and elvitegravir (EVG), with docosahexaenoic acid (DHA) in one-step, one-pot, high-yielding reactions. The in vitro drug release profiles of these synthetic conjugates demonstrated sustained and controlled release of the active drug over a period of 3-4 weeks attributable to the hydrolysis of the chemical linker in conjunction with the hydrophilicity of the parent drug. Both conjugates exhibited superior antiviral activities in tissue culture models of HIV replication as compared to those of the free drugs, strengthening their role as potent prodrugs for HIV therapy. Pharmacokinetic analysis in CD1 mice further confirmed the long-acting aspect of these conjugates with released drug concentrations in plasma detected at their respective IC 90 /IC 95 values over a period of 2 weeks and discernable amounts of active drug even at 6 weeks. Our findings suggest that the injectable small molecule conjugates could be used as long-acting controlled release of FTC and EVG in attempts to mitigate adherence-related HIV resistance., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Influenza places a significant health and economic burden on society. Efficacy of seasonal influenza vaccines can be suboptimal due to poor matching between vaccine and circulating viral strains. An influenza vaccine that is broadly protective against multiple virus strains would significantly improve vaccine efficacy. The highly conserved ectodomain of matrix protein 2 (M2e) and 3'3' cyclic GMP-AMP (cGAMP) were selected as the antigen and adjuvant, respectively, to develop the basis for a potential universal influenza vaccine. The magnitude and kinetics of adaptive immune responses can have great impact on vaccine efficacy. M2e and cGAMP were therefore formulated within acetalated dextran (Ace-DEX) microparticles (MPs) of varying degradation profiles to examine the effect of differential vaccine delivery on humoral, cellular, and protective immunity. All Ace-DEX MP vaccines containing M2e and cGAMP elicited potent humoral and cellular responses in vivo and offered substantial protection against a lethal influenza challenge, suggesting significant vaccine efficacy. Serum antibodies from Ace-DEX MP vaccinated mice also demonstrated cross reactivity against M2e sequences of various viral strains, which indicates the potential for broadly protective immunity. Of all the formulations tested, the slowest-degrading M2e or cGAMP MPs elicited the greatest antibody production, cellular response, and protection against a viral challenge. This indicated the importance of flexible control over antigen and adjuvant delivery. Overall, robust immune responses, cross reactivity against multiple viral strains, and tunable delivery profiles make the Ace-DEX MP platform a powerful subunit vaccine delivery system., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Previously we have encapsulated host-directed therapy AR-12 into acetalated dextran (Ace-DEX) microparticles (MPs) to mitigate drug toxicity and passively target phagocytic host cells. Herein, we have improved upon our initial emulsion-based formulation of Ace-DEX MPs encapsulating AR-12 (AR-12/MPs) by improving the drug encapsulation efficiency, evaluating sterilization processes for manufacturing, and understanding cellular and in vivo trafficking of the MPs. By using an alternative solvent system, ethyl acetate, we report an increased encapsulation efficiency of AR-12 while maintaining the pH-responsive degradation kinetics of Ace-DEX MPs. To better manufacture this novel antimicrobial formulation, we sterilized AR-12/MPs by gamma irradiation or ethylene oxide and evaluated their efficacy against intracellular Salmonella enterica serovar Typhi. Sterilized AR-12/MPs resulted in a significant reduction in intracellular bacterial burden compared to Blank/MPs. We also characterized intracellular trafficking of Ace-DEX MPs encapsulating fluorophores, which demonstrated internalization of MPs in endo/lysosomal compartments and time and degradation-rate dependent lysosomal escape into cytosolic compartments. Additionally, in vivo toxicity was mitigated following encapsulation of AR-12, where the maximum tolerated dose of AR-12 was increased compared to soluble treatment via intranasal, intravenous, and intraperitoneal administration routes. Following in vivo trafficking of Ace-DEX MPs via the same routes, intranasal administration demonstrated the highest accumulation in the lungs, liver, and kidneys, which persisted out to 240 h. Overall, we have advanced the formulation of this host-directed therapy and broadened the understanding of Ace-DEX MP delivery.

Vaccines are the most effective tool for preventing infectious diseases; however, subunit vaccines, considered the safest type, suffer from poor immunogenicity and require adjuvants to create a strong and sustained immune response. As adjuvants, pathogen-associated molecular patterns (PAMPs) offer potent immunostimulatory properties and defined mechanisms of action through their cognate pattern recognition receptors (PRRs). Their activity can be further enhanced through combining two or more PAMPs, particularly those that activate multiple immune signaling pathways. However, the cytosolic localization of many PRRs requires intracellular delivery of PAMPs for optimal biological activity, which is particularly true of the stimulator of interferon genes (STING) PRR. Using acetalated dextran (Ace-DEX) microparticles (MPs) encapsulating STING agonist 3'3'-cyclic GMP-AMP (cGAMP) combined with soluble PAMPS, we screened the effect of codelivery of adjuvants using primary mouse bone marrow derived dendritic cells (BMDCs). We identified that codelivery of cGAMP MPs and soluble Toll-like receptor 7/8 (TLR7/8) agonist resiquimod (R848) elicited the broadest cytokine response. cGAMP and R848 were then coencapsulated within Ace-DEX MPs via electrospray. Using the model antigen ovalbumin, we observed that Ace-DEX MPs coencapsulating cGAMP and R848 (cGAMP/R848 Ace-DEX MPs) induced antigen-specific cellular immunity, and a balanced Th1/Th2 humoral response that was greater than cGAMP Ace-DEX MPs alone and PAMPs delivered in separate MPs. These data indicate that polymeric Ace-DEX MPs loaded with STING and TLR7/8 agonists represent a potent cellular and humoral vaccine adjuvant.

Subunit vaccines are often poorly immunogenic, and adjuvants and/or delivery vehicles, such as polymeric microparticles (MPs), can be used to enhance immune responses. MPs can also be used to understand cell activation kinetics and the significant impact antigen and adjuvant release has on adaptive immune responses. By controlling antigen and adjuvant release, we can determine if it is important to have precise temporal control over release of these elements to optimize the peak and duration of protective immunity and improve vaccine safety profiles. In order to study the effect of tunable adjuvant or antigen delivery on generation of adaptive immunity, we used acetalated dextran (Ace-DEX) MPs. Ace-DEX MPs were used because their tunable degradation can be controlled based on polymer cyclic acetal coverage (CAC). Ace-DEX MPs of varying degradation profiles were used to deliver murabutide or ovalbumin (OVA) as a model adjuvant or antigen, respectively. When murabutide was encapsulated within Ace-DEX MPs to test for controlled adjuvant delivery, fast-degrading MPs exhibited higher humoral and cellular responses in vivo at earlier time points, while slow-degrading MPs resulted in stronger responses at later time points. When OVA was encapsulated within Ace-DEX MPs to test for controlled antigen delivery, fast-degrading MPs induced greater antibody and cytokine production throughout the length of the experiment. This differential response suggests the need for distinct, flexible control over adjuvant or antigen delivery and its impact on immune response modulation., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Most FDA-approved adjuvants for infectious agents boost humoral but not cellular immunity, and have poorly-understood mechanisms. Stimulator of interferon genes (STING, also known as MITA, MPYS, or ERIS) is an exciting adjuvant target due to its role in cyclic dinucleotide (CDN)-driven anti-viral immunity; however, a major hindrance is STING's cytosolic localization which requires intracellular delivery of its agonists. As a result, STING agonists administered in a soluble form have elicited suboptimal immune responses. Delivery of STING agonists via particle platforms has proven a more successful strategy, but the opportunity for improved formulations and bioactivity remains. In this study we evaluated the adjuvant activity of the potent STING agonist, CDN 3'3'-cGAMP (cGAMP), encapsulated in acid-sensitive acetalated dextran (Ace-DEX) polymeric microparticles (MPs) which passively target antigen-presenting cells for intracellular release. This formulation was superior to all particle delivery systems evaluated and maintained its bioactivity following a sterilizing dose of gamma irradiation. Compared to soluble cGAMP, the Ace-DEX cGAMP MPs enhanced type-I interferon responses nearly 1000-fold in vitro and 50-fold in vivo, caused up to a 10 4 -fold boost in antibody titers, increased Th1-associated responses, and expanded germinal center B cells and memory T cells. Furthermore, the encapsulated cGAMP elicited no observable toxicity in animals and achieved protective immunity against a lethal influenza challenge seven months post-immunization when using CDN adjuvant doses up to 100-fold lower than previous reports. For these reasons, Ace-DEX MP-encapsulated cGAMP represents a potent vaccine adjuvant of humoral and cellular immunity., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Microparticles (MPs) derived from acid-sensitive biopolymers enable rapid degradation and cargo release under acidic conditions, such as at tumor microenvironments, within lysosomal/phagosomal compartments inside phagocytic cells, or at sites of inflammation. One such acid-sensitive biopolymer, acetalated dextran (Ace-DEX), has tunable degradation rates and pH-neutral degradation byproducts consisting of dextran, acetone, and ethanol. By studying the degradation profiles of Ace-DEX MPs with varying cyclic acetal coverage (CAC) and dextran molecular weight (MW), we concluded that MPs composed of low CAC or high MW polymer degraded the fastest at both pH 7.4 and 5.0. To further understand the properties of this unique polymer, we encapsulated a model drug resiquimod, which is a toll-like receptor (TLR) 7/8 agonist, into Ace-DEX MPs of different polymer CAC and dextran MW. It was observed that resiquimod was released faster from MPs of lower CAC or higher MW. By evaluating the activation of RAW macrophages cultured with different types of resiquimod-loaded Ace-DEX MPs, we found that MPs of lower CAC or higher MW promoted greater nitrite production and resulted in more robust cell activation. Our results indicate we can precisely control the degradation profile, release kinetics, and bioactivity of encapsulated cargos by altering CAC and MW, furthering Ace-DEX MPs' novelty as a drug carrier., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Subunit formulations are regarded as the safest type of vaccine, but they often contain a protein-based antigen that can result in significant challenges, such as preserving antigenicity during formulation and administration. Many studies have demonstrated that encapsulation of protein antigens in polymeric microparticles (MPs) via emulsion techniques results in total IgG antibody titers comparable to alum formulations, however, the antibodies themselves are non-neutralizing. To address this issue, a coaxial electrohydrodynamic spraying (electrospray) technique is used to formulate a microparticulate-based subunit anthrax vaccine under conditions that minimize recombinant protective antigen (rPA) exposure to harsh solvents and high shear stress. rPA and the adjuvant resiquimod are encapsulated either in separate or the same acetalated dextran MPs. Using a murine model, the electrospray formulations lead to higher IgG2a subtype titers as well as comparable total IgG antibody titers and toxin neutralization relative to the FDA-approved vaccine (BioThrax). BioThrax provides no protection against a lethal inhalational challenge of the highly virulent Ames Bacillus anthracis anthrax strain, whereas 50% of the mice vaccinated with separately encapsulated electrospray MPs survive. Overall, this study demonstrates the potential use of electrospray for encapsulating protein antigens in polymeric MPs., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Purpose: Since the adoption of highly active antiretroviral therapy, HIV disease progression has slowed across the world; however, patients are often required to take multiple medications daily of poorly bioavailable drugs via the oral route, leading to gastrointestinal irritation. Recently, long acting antiretroviral injectables that deliver drug for months at a time have moved into late phase clinical trials. Unfortunately, these solid phase crystal formulations have inherent drawbacks in potential dose dumping and a greater likelihood for burst release of drug compared to polymeric formulations., Methods: Using electrospinning, acetalated dextran scaffolds containing the protease inhibitor saquinavir were created. Grinding techniques were then used to process these scaffolds into injectables which are termed saquinavir microconfetti. Microconfetti was analyzed for in vitro and in vivo release kinetics., Results: Highly saquinavir loaded acetalated dextran electrospun fibers were able to be formed and processed into saquinavir microconfetti while other polymers such as poly lactic-co-glycolic acid and polycaprolactone were unable to do so. Saquinavir microconfetti release kinetics were able to be tuned via drug loading and polymer degradation rates. In vivo, a single subcutaneous injection of saquinavir microconfetti released drug for greater than a week with large tissue retention., Conclusions: Microconfetti is a uniquely tunable long acting injectable that would reduce the formation of adherence related HIV resistance. Our findings suggest that the injectable microconfetti delivery system could be used for long acting controlled release of saquinavir and other hydrophobic small molecule drugs.

Acid-degradable polymers are well-suited for use as drug delivery vehicles because numerous physiological sites (e.g., intracellular endocytic pathway) are acidic. Here we report the synthesis of acid-sensitive silylated polysaccharides derived from either dextran or inulin with various alkyl substitutions on the silicon center: trimethylsilyl dextran (TMS-DEX), ethyldimethylsilyl dextran (EDMS-DEX), triethylsilyl dextran (TES-DEX), and trimethylsilyl inulin (TMS-IN). The silylated dextran (Silyl-DEX) and silylated inulin (Silyl-IN) polymers were fabricated into microparticles (MPs) via emulsification followed by solvent evaporation. These MPs were relatively stable at extracellular pH 7.4 and displayed a wide range of pH 2.0 and 5.0 degradation half-lives (fifteen minutes to greater than nine days) that were dependent on the extent of silylation (40 to 98%) and steric crowding on the silicon center (trimethyl to ethyldimethyl to triethyl). Silyl-DEX and Silyl-IN MPs exhibited cytocompatibility when cultured in vitro with RAW 264.7 macrophages. TES-DEX and TMS-IN MPs, composed of highly hydrophobic moieties and the parent immunostimulatory inulin, respectively, elicited substantial in vitro production of tumor necrosis factor alpha, a cytokine associated with an innate immune response. In vivo immunization with a model ovalbumin antigen encapsulated in silylated polysaccharide MPs, without a separate adjuvant, resulted in a dual humoral and cellular response that was superior to an alum-adjuvanted formulation. Overall, we present Silyl-DEX and Silyl-IN as members of the acid-degradable polymer family for potential use in subunit vaccines and other drug delivery applications.

To develop a new subunit vaccine adjuvant, we chemically modified a naturally-occurring, immunostimulatory inulin polysaccharide to produce an acid-sensitive biopolymer (acetalated inulin, Ace-IN). Various hydrophobic Ace-IN polymers were formed into microparticles (MPs) by oil-in-water emulsions followed by solvent evaporation These Ace-IN MPs possessed tunable degradation characteristics that, unlike polyesters used in FDA-approved microparticulate formulations, had only pH-neutral hydrolytic byproducts. Macrophages were passively targeted with cytocompatible Ace-IN MPs. TNF-α production by macrophages treated with Ace-IN MPs could be altered by adjusting the polymers' chemistry. Mice immunized with Ace-IN MPs encapsulating a model ovalbumin (OVA) antigen showed higher production of anti-OVA IgG antibody levels relative to soluble antigen. The antibody titers were also comparable to an alum-based formulation. This proof-of-concept establishes the potential for chemically-modified inulin MPs to simultaneously enable dual functionality as a stimuli-controlled antigen delivery vehicle and immunostimulatory adjuvant.

Melioidosis, a potentially lethal disease of humans and animals, is caused by the soil-dwelling bacterium Burkholderia pseudomallei. Due to B. pseudomallei's classification as a Tier 1 Select Agent, there is substantial interest in the development of an effective vaccine. Yet, despite decades of research, no effective target, adjuvant or delivery vehicle capable of inducing protective immunity against B. pseudomallei infection has been identified. We propose a microparticulate delivery vehicle comprised of the novel polymer acetalated dextran (Ac-DEX). Ac-DEX is an acid-sensitive biodegradable carrier that can be fabricated into microparticles (MPs) that are relatively stable at pH 7.4, but rapidly degrade after phagocytosis by antigen presenting cells where the pH can drop to 5.0. As compared to other biomaterials, this acid sensitivity has been shown to enhance cross presentation of subunit antigens. To evaluate this platform as a delivery system for a melioidosis vaccine, BALB/c mice were vaccinated with Ac-DEX MPs separately encapsulating B. pseudomallei whole cell lysate and the toll-like receptor (TLR) 7/8 agonist resiquimod. This vaccine elicited a robust antibody response that included both Th1 and Th2 immunity. Following lethal intraperitoneal challenge with B. pseudomallei 1026b, vaccinated mice demonstrated a significant delay to time of death compared to untreated mice. The formulation, however, demonstrated incomplete protection indicating that lysate protein offers limited value as an antigen. Nevertheless, our Ac-DEX MPs may offer an effective delivery vehicle for a subunit B. psuedomallei vaccine., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Intracellular pathogens present a major health risk because of their innate ability to evade clearance. Their location within host cells and ability to react to the host environment by mutation or transcriptional changes often enables survival mechanisms to resist standard therapies. Host-directed drugs do not target the pathogen, minimizing the potential development of drug resistance; however, they can be difficult to deliver efficiently to intracellular sites. Vehicle delivery of host-mediated response drugs not only improves drug distribution and toxicity profiles, but can reduce the total amount of drug necessary to clear infection. In this article, we will review some host-directed drugs and current drug delivery techniques that can be used to efficiently clear intracellular infections.

To enhance the immune activity of vaccine adjuvants polyinosinic:polycytidylic acid (poly I:C) and CpG acetalated dextran (Ac-DEX) microparticles can be used. Ac-DEX is a biodegradable and water-insoluble polymer that degrades significantly faster at pH 5.0 (phagosomal pH) than at pH 7.4 and has tunable degradation rates that can range from hours to months. This is an ideal characteristic for delivery of an antigen and adjuvant within the lysosomal compartment of a phagocytic cell. We evaluated poly I:C and CpG encapsulated in Ac-DEX microparticles using RAW macrophages as a model antigen-presenting cell. These cells were cultured with poly I:C or CpG in their free form, encapsulated in a fast degrading Ac-DEX, in slow degrading Ac-DEX, or in the Food and Drug Administration-approved polymer poly(lactic-co-glycolic acid) (PLGA). Ac-DEX had higher encapsulation efficiencies for both poly I:C and CpG than PLGA. Furthermore, poly I:C or CpG encapsulated in Ac-DEX also showed, in general, a significantly stronger immunostimulatory response than PLGA and unencapsulated CpG or poly I:C, which was indicated by a higher rate of nitric oxide release and increased levels of cytokines such as TNF-α, IL-6, IL-10, and IFN-γ. Overall, we have illustrated a method for enhancing the delivery of these vaccine adjuvants to further enhance the development of Ac-DEX vaccine formulations.

Electrospun acetalated dextran (Ac-DEX) scaffolds were fabricated to encapsulate resiquimod, an immunomodulatory toll-like-receptor (TLR) agonist. Ac-DEX has been used to fabricate scaffolds for sustained and temporal delivery of therapeutics because it has tunable degradation rates that are dependent on its synthesis reaction time or the molecular weight of dextran. Additionally, as opposed to commonly electrospun polyesters that shift the local pH upon degradation, the degradation products of Ac-DEX are pH-neutral: dextran, an alcohol, and the metabolic byproduct acetone. Formulations of Ac-DEX with two different degradation rates were used in this study. The effects of electrospinning conditions on the scaffold size and morphology were examined as well as fibroblast adhesion as imaged with fluorescence microcopy and scanning electron microscopy. Macrophage (MΦ) viability further indicates that the scaffolds are cytocompatible. Also, the controlled release profiles of resiquimod from loaded scaffolds and nitric oxide (NO) production by MΦ incubated with these scaffolds show the potential for Ac-DEX scaffolds to be used to temporally and efficiently deliver therapeutics. Overall, we present a novel scaffold that can have tunable and unique drug release rates for tissue engineering, drug delivery, immunomodulation, and wound healing applications.

In the field of drug delivery, pH-sensitive polymeric microparticles can be used to release therapeutic payloads slowly in extracellular conditions (pH 7.4) and faster in more acidic areas in vivo, such as sites of inflammation, tumors, or intracellular conditions. Our group currently uses and is further developing the pH-sensitive polymer acetalated dextran (Ac-DEX), which is a biodegradable polymer with highly tunable degradation kinetics. Ac-DEX has displayed enhanced delivery of vaccine and drug components to immune and other cells, making it an extremely desirable polymer for immune applications. Currently, one of the degradation products of Ac-DEX is methanol, which may cause toxicity issues if applied at high concentrations with repeated doses. Therefore, in this manuscript we report the first synthesis and characterization of an Ac-DEX analog which, instead of a methanol degradation product, has a much safer ethanol degradation product. We abbreviate this ethoxy acetal derivatized acetalated dextran polymer as Ace-DEX, with the 'e' to indicate an ethanol degradation product. Like Ac-DEX, Ace-DEX microparticles have tunable degradation rates at pH 5 (intracellular). These rates range from hours to several days and are controlled simply by reaction time. Ace-DEX microparticles also show minimal cytotoxicity compared to commonly used poly(lactic-co-glycolic acid) (PLGA) microparticles when incubated with macrophages. This study aims to enhance the biocompatibility of acetalated dextran-type polymers to allow their use in high volume clinical applications such as multiple dosing and tissue engineering.