201 results on '"Gan, Xueping"'
Search Results
2. Development of Cu-15Ni-8Sn/MoS2 self-lubricating composites with desirable mechanical and friction properties
3. Microstructure and mechanical properties of a Cu-Ni-Sn-Si-Al alloy produced by equal channel angular pressing
4. Synergistic effects of fabrication techniques and the interface structure on the tribological properties of reduced graphene oxide/CuCr composites
5. Evolution of microstructure and properties of an ultrahigh strength Cu–Ni–Sn alloy with low Sn content during the multi-stage thermomechanical treatment
6. Submicron Ti(C,N)-based cermets with improved microstructure using high-energy milled and subsequent heat-treated ultrafine Ti(C,N) powders
7. Constructing a bifunctional catalyst with both high entropy alloy nanoparticles and Janus multi-principal alloy nanoparticles for high-performance overall water splitting
8. RGO reinforced Cu foam with enhanced mechanical and electromagnetic shielding properties
9. Nano TiC modified Ti(C,N)-based cermets with weakened rim-binder interfaces
10. Silver composites with an inhomogeneous structure reinforced by CNTs/Cu composite foams as 3-dimentional skeleton
11. Mechanical behavior and microstructure of 3D-printed carbon nanotubes-reinforced Cu composite
12. Microstructures, mechanical properties, and grease-lubricated sliding wear behavior of Cu-15Ni-8Sn-0.8Nb alloy with high strength and toughness
13. Effects of the partially-unzipped carbon nanotubes on the microstructure and properties of CuCr matrix composites
14. Enhanced mechanical properties of alloyed copper matrix composites reinforced with partially-unzipped carbon nanotubes
15. Construction of 3D interconnected diamond networks in Al-matrix composite for high-efficiency thermal management
16. Microstructure and Mechanical Properties of a Cu-Ni-Sn-Si-Al Alloy Produced by Equal Channel Angular Pressing
17. Correction: Zhang et al. Experimental and Numerical Studies on Hot Compressive Deformation Behavior of a Cu–Ni–Sn–Mn–Zn Alloy. Materials 2023, 16, 1445
18. Friction and Wear Properties of Copper Matrix Composites with CNTs/Cu Composite Foams as Reinforcing Skeletons
19. Enhanced properties of carbon nanotube-graphite hybrid-reinforced Cu matrix composites via optimization of the preparation technology and interface structure
20. Effect of heat treatment on microstructure and mechanical properties of a selective laser melted Cu–15Ni–8Sn alloy
21. Re-aging behavior of Cu–15Ni–8Sn alloy pretreated by dynamic strain aging
22. Strengthened Ti(C, N)-based cermets using high-energy ball-milled NiTiC binders: Microstructure and mechanical properties
23. Microstructures and properties of Cu/Fe/Kovar composites prepared with cu-coated Kovar alloy powders
24. Wear Regime and Wear Mechanism Map for Spark-Plasma-Sintered Cu-15Ni-8Sn-0.2Nb Alloy under Oil Lubrication
25. Effect of dynamic strain aging on the deformation behavior and microstructure of Cu-15Ni-8Sn alloy
26. Microstructure evolution of a Cu-15Ni-8Sn-0.8Nb alloy during prior deformation and aging treatment
27. High-energy ball-milling combined with annealing of TiC powders and its influence on the microstructure and mechanical properties of the TiC-based cermets
28. Effect of TiC addition on the microstructure and mechanical properties of TiN-based cermets
29. Effect of WC addition on the microstructure and mechanical properties of TiN-based cermets
30. Tribological Behaviors of an Ultrahigh Strength Cu–15Ni–8Sn–0.2Y Alloy Sliding Against TC6 Titanium Alloy in Deionized Water and Seawater
31. Additive manufacturing of fine-structured copper alloy by selective laser melting of pre-alloyed Cu-15Ni-8Sn powder
32. Improving properties of h-BN/GH4169 self-lubricating composites prepared using nickel coated h-BN powders
33. Experimental and Numerical Studies on Hot Compressive Deformation Behavior of a Cu–Ni–Sn–Mn–Zn Alloy
34. The preparation of silicon nitride ceramics by gelcasting and pressureless sintering
35. The tribo-corrosion behavior of Cu-9 wt% Ni-6 wt% Sn alloy
36. Effect of yttrium on the cellular precipitation kinetics, grain growth behavior and mechanical properties of high strength Cu-15Ni-8Sn alloy
37. Rheological properties of ITO slurries prepared from nano-powders for gelcasting process
38. Gelcasting of aluminum nitride ceramics using hydantion epoxy resin as gelling agent
39. Interfacial Bonding Improvement through Nickel Decoration on Carbon Nanotubes in Carbon Nanotubes/Cu Composite Foams Reinforced Copper Matrix Composites
40. Role of additives in electroless copper plating using hypophosphite as reducing agent
41. Single-Atom and Bimetallic Nanoalloy Supported on Nanotubes as a Bifunctional Electrocatalyst for Ultrahigh-Current-Density Overall Water Splitting
42. Evolution of Microstructure and Properties of an Ultrahigh Strength Cu-Ni-Sn Alloy with Low Sn Content During the Multi-Stage Thermomechanical Treatment
43. Effect of Yttrium on Cellular Precipitation Kinetics, Grain Growth Behavior and Mechanical Properties of High Strength and Toughness Cu-15ni-8sn Alloy
44. Silver composites with an inhomogeneous structure reinforced by CNTs/Cu composite foams as 3-dimentional skeleton
45. A Combination of Enhanced Mechanical and Electromagnetic Shielding Properties of Carbon Nanotubes Reinforced Cu-Ni Composite Foams
46. Evaluation methods for mechanical biocompatibility of hernia repair meshes: respective characteristics, application scope and future perspectives
47. Electroless plating of Cu–Ni–P alloy on PET fabrics and effect of plating parameters on the properties of conductive fabrics
48. Effects of K4Fe(CN)6 on electroless copper plating using hypophosphite as reducing agent
49. Electroless copper plating on PET fabrics using hypophosphite as reducing agent
50. Dense TiN‐Ni cermets with improved sinterability, microstructure, and mechanical properties using Ni‐coated TiN powders
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.