Search

The magnetic coupling of filter inductors is widely utilized in various power electronics application fields, including most commonly implemented dc-dc converters in electric vehicle charger systems, in order to enhance the filtering performance while maintaining the minimal filter size. The optimal distribution of self and mutual inductance of the coupled inductor is regarded as one of the important design tasks with respect to the coupling factor. This article proposes an explicit mathematical form of the optimized coupling factor design of a generalized n-winding coupled inductor, which generates the least size of inductor current ripple in phase-staggered multiparalleled dc-dc converters. The general equations for the n-winding coupled inductor are verified through the example case of the three-winding coupled inductor. The experimental results successfully confirmed the newly proposed method of obtaining the optimal coupling factor. [ABSTRACT FROM AUTHOR]

This study focuses on a high-performance direct active and reactive power controller design that is successfully applicable to three-phase pulse width modulation (PWM) AC/DC converters used in renewable distributed energy generation systems. The proposed controller can overcome the sluggish transient dynamic response of conventional controllers to rapid power command changes. Desired active and reactive powers can be thoroughly obtained at the end of each PWM period through a deadbeat solution. The proposed controller achieves an exact nonlinear cross-coupling decoupling of system power without using a predefined switching table or bang/bang hysteresis control. A graphical and analytical analysis that naturally leads to a control voltage vector selection is provided to confirm the finding. The proposed control strategy is evaluated on a 3 kW PWM AC/DC converter in the simulation and experiment. [ABSTRACT FROM AUTHOR]

This paper presents a multilevel step-up dc/dc converter for dc-grid-based offshore wind energy conversion applications. The main features of the proposed multilevel converter are as follows: 1) the voltage stress of the power devices can be reduced, making it suitable for high-voltage applications; 2) the boost inductor can be reduced significantly, leading to the outstanding dynamic performance; and 3) high-voltage gain can be obtained and thus is well-suited for high-gain applications. Theoretical analysis was carried out for a four-level step-up converter, based on which, the converter can be extended to any arbitrary number of levels. The proposed four-level converter was verified by a simulation and evaluated by comparing with a conventional multilevel dc/dc converter in terms of the component stress and power device count. The developed topology was implemented on a 2-kW prototype converter to evaluate its feasibility. [ABSTRACT FROM AUTHOR]

This paper presents a high-efficiency multilevel flying-capacitor (FC) dc/dc power conversion with a lower passive component rating and power device count for distributed renewable energy systems. A resonant technique is adopted for the proposed dc/dc converter to achieve zero-current switching (ZCS) for all switches. Theoretical analysis is carried out for the proposed quintuple topology with three active switches. The proposed converter is evaluated to the conventional FC converter, in terms of the component rating and count, to highlight its advantages with respect to the power density and cost. The experimental results of a 1-kW prototype FC converter are presented to validate the theoretical analysis and principles, as well as attest the feasibility of the proposed topologies. [ABSTRACT FROM PUBLISHER]