Search

This study examines how a chemical reaction and a nonuniform heat source effect the flow of an MHD Casson nanofluid over a nonlinear stretching sheet. By incorporating viscous dissipation, the energy equation is strengthened. Brownian diffusion, thermophoresis diffusion effects are taken place. By using the necessary similarity transformations, the governing equations for the current flow are converted into a nonlinear system. The RKF technique yields a numerical solution along with a shooting technique for the condensed system. Thereafter, to better understand the physical interpretation of flow and heat transfer, the flow-controlling parameters are shown graphically and in tabular form in the current work. Based on the present study's numerical results, a fair connection is found between this analysis and previous studies. Some of the observations are velocity profile is decreased for the effects of magnetics and stretching parameter variations and Eckert number plays a great role in the increase of temperature profile. [ABSTRACT FROM AUTHOR]

The principal aim of this investigation is to examine the gold and magnesium oxide hybrid nanoparticles in different physical capacities on the water-based hybrid nanofluid and elaborate on an erratic squeezing flow among both infinite plates. Melting effect and thermal radiation depict heat transfer features. Production of the Bejan number and entropy is upward. The explains the governing equations, and the standard transformation is supplied. The numerical solutions are carried out using an efficient finite element method. To analyze difference between heat transfer and its implication in industrial zone, the Nusselt number was arranged in a horizontal pattern. The results showed that a thicker thermal boundary layer increased the Eckert number and the volume fraction of gold nanoparticles. Anyhow, the heat transfer rate by Au–MgO/water was necessarily greater than the Au–water. The obtained results are excellent and vigorously oppose those that are applicable to the literature by the attached position. It was established for hybrid nanofluids to display higher entropy generation rates. The outcomes of this analysis were the consequence of the appraisal of the impact on few required form parameters in heat transfer and consequently on the expansion for industrial use. [ABSTRACT FROM AUTHOR]

This paper presents thorough computational and theoretical analyses of steady forced convective flow over a rotating disc submerged in a water-based nanofluid containing microorganisms. It delves into the examination of boundary layer flow characteristics of a viscous nanofluid, considering Stefan blowing effects and multiple slip conditions influenced by a magnetic field. Notably, the study accounts for novel aspects such as thermal radiation and both constructive and destructive chemical reactions. The movement of nanoparticles is elucidated based on thermophoresis and microscopic behaviors, while changes in volume fraction do not affect the thermo-physical properties of the nanofluid. To address the altered nonlinear set of differential equations, an effective numerical approach, the Keller-Box method, is implemented for critical and efficient solutions. These appropriate transformations are defined and applied. When compared to blowing suction, it shows a better enhancement in the rate of heat transfer, mass, and microorganisms. Some of the main observations are there is a decrease in wall skin friction in the directions of radial and tangential as magnetic field strength is increased. The evaluation of thermal boundary layer thickness and temperature is noted for the radiation parameter (Rd) improvement. The present analysis has applications in electromagnetic micro-pumps and nanomechanics. As to the applications in the science and engineering fields, technologies such as micro-electromechanical systems-based microfluidic devices and microfluidic-related technologies will be accepted. [ABSTRACT FROM AUTHOR]

AbstractTransferring biological fluid through arteries is a topic that has garnered serious interest in recent times, especially when it pertains to applications such as drug delivery. In our body, arteries serve as the primary conduits for blood flow and this study aims to model the blood flow in this situation. The working fluid is essentially pure blood, which acts as a base fluid, supplemented with nanoparticles of Titanium Dioxide (TiO2) and Gold (Au). Nanoparticles could change the thermal and rheological properties of blood which might be particularly advantageous for ensuring smoother flow or optimal distribution of drug molecules within the bloodstream. In the present work, a porous channel is considered with parallel walls that exhibit varying permeability on boundaries. Such a design enables the nanoblood to enter and exit the channel, mimicking certain natural processes like transvascular fluid exchange. Additionally, the variable height of the channel that expands and squeezes uniformly could be reminiscent of the pulsatile nature of blood flow seen in our arteries due to heartbeats. To understand the dynamics of this hybrid nanoblood flow, the governing equations are converted into a set of nonlinear ordinary differential equations using the similarity transformation approach. For solving these transformed equations, the research harnesses the BVP4C built-in function in MATLAB software. Through this computational approach, the research provides insights into the velocity and temperature profile of the fluid, the distribution of normal pressure, wall shear stress, and the Nusselt number concerning various parameters. The findings of the present study can be significant and useful in biological sciences and technologies and the detailed results are presented completely in the article’s body. [ABSTRACT FROM AUTHOR]

In this paper, the free convection flow phenomenon on magnetized second-grade nanofluid over a nonlinear elongating surface has been modeled under the assumptions of generalized Fick's and Cattaneo–Christov heat flux relations. The non-uniform heat source and sink and thermal radiation effects are used in the energy equation with the Buongiorno nanofluid model. The effect on activation energy and chemical processes is also examined, making the current numerical scrutinization innovative. The current mathematical model begins with partial derivative equations (PDEs), which are then transformed into ordinary derivative equations (ODEs) using similarity transformations. The outcomes are obtained using a combination of the finite-difference scheme with the collocation method, approximated up to desirable accuracy, and the effects of various parameters on the modified second-grade nanofluid are discussed using tables and graphs. The temperature distribution for the thermal boundary layer is raised with nonlinear thermal radiation and Brownian motion parameters. The present thorough analysis identified several technical and industrial applications, including Biomedical applications in cancer treatment, electrical wire manufacturing, oil friction control in pipelines, manufacturing processes, and aerodynamic expulsion utilizations. [ABSTRACT FROM AUTHOR]

Nanofluids are the fluid suspensions in nanoparticles. A considerable enhancement in their features is less nanoparticle concentrations. Various studies on nanofluids focused on representing their performance with respect to the functions — here enhancing straight heat transfer was critical, like that in nuclear reactors, transportation, different industrial settings, biology, food and electronics. Hence, this consideration analyzes the utilization of the novel mathematical method, called the bvp4c method by viscous heat energy research in Buongiorno-modeled nanoliquid confined by the apt permeable plate along with slip mechanism. The thermophoresis and Brownian dispersion affects are again assumed. This transfer of solutal and thermal energy was dependent on the appreciable effect on heat source, variable chemical reactions and nonlinear thermal radiation. The dimensional model of partial differential equations (PDEs), applied to precise related applications, had been adapted into ordinary differential equations (ODEs). This modified Nusselt number decreases with increasing viscous heating, thermal radiation, thermophoresis parameter and Brownian motion, always it rises due to increasing temperature ratio parameter. The validation of the outcomes was attained with past solutions by free convectional flow and non-magnetic research. There are many functions in petroleum industries and engineering like electroplating, chemical processing of substantial metals and solar water heaters. [ABSTRACT FROM AUTHOR]

This analysis explains the magneto-hydrodynamic flow on Williamson nanofluids previous stretching surface surrounded by the permeable media. The apt magnetic field was suggested for the angle of the axial direction of the flow. Anyhow, this flow phenomenon was characterized into the added heat source/sink and conjunction of radiating heat. The impacts of convective heating and viscous heating by expanding surface were again the significant feature of the analysis. This originality arises by the combination of the cross-diffusion effects of reverse behavior on the thermophoresis and Brownian motion. This form sketched into the aforesaid phenomenon was modified into the nonlinear ordinary form by the appropriate assumptions on comparison transformations. Therefore, the sets of equations were controlled for the numerical access using Lobatto-IIIa collocation method applicable to this Matlab bvp4c shooting process. This parametric performance of many components about their statistical values was given numerical imitations graphically by the rate coefficients in tabular forms. The validation and the compliance of the current result were acquired by the past study on the specific case. Further, the significant results of this analysis were: This non-Newtonian Williamson parameter combination of that magnetizing property diminishes the fluid velocities. In addition, the important influence of both viscosity parameter and radiation parameter of heating process was noted. [ABSTRACT FROM AUTHOR]

The importance of bioconvection into the application of nanoparticles has had a significant impact on fundamental technological and industrial functions in recent years. These discussions are being carried forward by the bioconvection appearance on that flow by attracting nanoparticles into additional features on thermal radiation and activation energy. The investigation had been proposed on the appealing features of the mass and thermal convective boundary constraints. The high desirable subclass on rate-type fluid, especially Williamson fluid, was used to anticipate the absolute rheological parameters. The designated partial differential system was modified along with nonlinear ordinary differential equations applying enhance being related conversion, the designated partial differential system was modified along nonlinear ordinary differential equations. The governing equations are interpreted into ordinary differential equations, and in the following, shooting process was obeyed to build up the mathematical classification on the convert dimensionless flow problem. This value of physical restraint was displayed on the table and plots tests. This noted theoretical imitation could be highly successful in improving the solar energy systems and thermal extrusion processes. The outcomes reported that the rise in Weissenberg number and Hartmann number decreased the nanoparticles velocity distribution. The progressing temperature distribution was observed to develop radiation parameter and thermal conductivity parameter. That was further noted to modify bioconvection Lewis number and Peclet number that were reduced into motile microorganism distribution effectively. [ABSTRACT FROM AUTHOR]

The hydrothermal performance of a hybrid nanofluid made of graphene, gold/polydimethylsiloxane between two squeezing plates is discussed in this study. In the investigation of thermal transport of the flow, both linear and nonlinear thermal radiation's effects are taken into account. Bejan numbers are used to determine the system's energy efficiency. Viscous and thermal radiation effects on Maxwell hybrid nanofluid flow in a squeezing channel are incorporated to explore the outcomes. By applying similarity transformations, the set of ordinary differential equations in this case is transformed into the governing equations. With the use of the Runge–Kutta–Fehlberg technique converted system is solved numerically. Skin friction and heat transfer rates under the influence of certain oriented parameters are numerically analysed and presented in tabular form. The impacts of different factors on the temperature and velocity profiles are illustrated graphically and briefly described. Important findings include that the Bejan number raises as the radiation parameter Rd rises, but that it falls with respect to the Eckert number effect. Additionally, the skin friction values and Nusselt number in the hybrid nanofluid case are larger than in the nanofluid case. Furthermore, it has been found that the Deborah number-described stress relaxation phenomenon causes the flow field and thermal energy transfer to be less efficient when fluids are moving. There is surprisingly little research on the hybrid fluid integrated into their issues. [ABSTRACT FROM AUTHOR]

Condition monitoring of gear train assembly has been carried out with vibration signals acquired from an all-terrain vehicle (ATV) gearbox. The location of the defect in the gear was identified based on finite element analysis results. The vibration signals were acquired using an accelerometer under good and simulated fault conditions of the gear. The raw vibration signatures acquired from all the possible conditions of the gear train assembly were processed using the descriptive statistics tool. A set of descriptive statistical features were extracted from the raw vibrational signals. This study used a deep learning algorithm based on the tree family, which includes the decision tree, random forest, and random tree algorithms, to classify gear train conditions. Among the tree family algorithms, the random forest algorithm produced maximum classification accuracy of 99%. The decision rules were used to design an online monitoring system to display the gear condition. This study will help to implement online gear health monitoring in ATVs, ensuring the safety of drivers.

The viscoelastic characteristics of an incompressible, axisymmetric Casson–Maxwell nanoliquid flow between two stationary discs were examined in this paper. Two porous discs are constrained for uniform injection. The Christov model is used in conjunction with the Buongiorno model. In an energy equation with a nonlinear form, thermal radiation characteristics are used. In the current continuation, the impact of chemical reactions is taken into account, making the work more adaptable. Using appropriate transformations, the constructed model was transformed into a dimensionless form. The solution is obtained by employing the FEM technique. The related parameters are described using physical results. The radial velocity distribution at the center line was reduced using a magnetic parameter and a Casson parameter. When the Brownian motion constant and radiation parameter are increased, the temperature distribution of nanoparticles enhances. Furthermore, the rate of the reaction increases in the presence of a chemical reaction. Pearson's correlation coefficient was used to discover a relationship between the Sherwood and Nusslet numbers. To determine the linear relationship between variables, the t -test method is used. [ABSTRACT FROM AUTHOR]

The principle aim is to investigate the micro-inertia for vertex viscosity effects that were utilized about design to act on heat energy. Heat transfer was imposed out that unsteady distributed stagnation point flow by micro-polar fluid. That define the energy equation, Cattaneo-Christov heat flux figure was used for formal Fourier's law. Effects on exponential space-dependent heat source and linear thermal radiation were more comprise on the interpreted model. Numerical technique finite element method was occupied about the results to ordinary differential equations that were acquired against governing partial differential equations below the convenient equal transformations. This flow reach toward the departure domain displayed the absorbed flow aspect and opposite flow aspect susceptible on that physical parameters elaborate into the analysis. In view of acquired results, we observed that thermal profile downturn about extra sizably higher values of relaxation time, during increase into increasing radiation factor. An increase in vertex viscosity increases angular motion. Moreover, space-dependent heat digestion is extra applicable about cooling process. That more, the acceptance of current results was entire as growing analogy into actual circulated work. [ABSTRACT FROM AUTHOR]

The thermal radiation and convective condition principles were working on specific functions like gas turbines, electrical fuel, renewable energy, projectiles, nuclear power plants, aerospace engineering, and thermal transportation. Considering the aforementioned functions, the present analysis inspected the stagnation point hybrid nanofluids movement over the rotating sphere on the behavior of viscous dissipation and thermal radiation. Silver and Ferrous nanoparticles including the host fluid water were held into affected the flow. The presence of convective boundary conditions is incorporated within the system. Applying appropriate correspondence factors, nonlinear governing equations were transformed with ordinary differential equations. This finite element method is applied to find the mathematical solutions to the boundary conditions and simplified equations. These outcomes convey to temperature was decreased about accelerated factor, although primary velocity was found into increased. The heat transfer was magnified by thermal Biot number, and that rate of development was greater about hybrid nanosuspension. The heat transport method was reduced by the Eckert number; also that reduction rate was similarly dull on hybrid. [ABSTRACT FROM AUTHOR]

In this paper, the self-propelled movement on gyrotactic swimming microorganisms into this generalized slip flow by nanoliquid over the stretching cylinder with strong magnetic field is discussed. Constant wall temperature was pretended as well as the Nield conditions of boundary. The intuitive non-Newtonian particulate suspension was included into applying Casson fluid by the base liquid and nanoparticles. This formation on the bio-mathematical model gives the boundary value problem by the nonlinear partial differential equations. Primly, modeled numerical system was converted to nondimensional against this help on acceptable scaling variables and the bvp4c technique was used to acquire the mathematical outcomes on the governing system. This graphical description by significant parameters and their physical performance was widely studied. The Prandtl number has the maximum contribution (112.595%) along the selected physical parameters, whereas the Brownian motion has the least (0.00165%) heat transfer rate. Anyhow, Casson fluid was established for much helpful suspension of this method on fabrication and coatings, etc. Therefore, this magnetic field performs like the resistive force of that fluid motion, and higher energy was enlarged into the structure exhibiting strong thermal radiation. [ABSTRACT FROM AUTHOR]