Search

A dual-band, dual-mode button antenna is proposed for emerging fifth-generation (5G) networks and Industrial, Scientific, and Medical (ISM) communication systems, as it operates at 3.5 GHz and 5.8 GHz, respectively. At the lower band, a monopole-like omnidirectional radiation pattern is achieved by loading shorting pins on curved strips for on-body communication. At the higher band, broadside circularly polarized radiation is achieved by loading an asymmetric U-shaped slot in the central chamferd patch for off-body communication. By using Characteristic Modal Analysis (CMA), a clear physical insight into the formation of dual polarization is provided. The −10 dB impedance bandwidth ranges from 3.48 to 3.60 GHz and 5.65 to 6.03 GHz, respectively. The 3 dB axial ratio (AR) bandwidth ranges from 5.71 to 5.85 GHz in the high band. Additionally, the antenna achieves a peak gain of 1.2 dBi in on-body mode and 6.9 dBi in off-body mode. The maximum specific absorption rate (SAR) calculated on the body tissues is below the US/EU standard thresholds of 1.6 W/kg and 2 W/kg. The measured results indicate that the antenna experiences only slight impact from human body loading and structural deformations. Given its notable features, the proposed design is well suited for Wireless Body Area Network (WBAN) applications. [ABSTRACT FROM AUTHOR]

Photo‐rechargeable zinc‐ion batteries (PRZIBs) have attracted much attention in the field of energy storage due to their high safety and dexterity compared with currently integrated lithium‐ion batteries and solar cells. However, challenges remain toward their practical applications, originating from the unsatisfactory structural design of photocathodes, which results in low photoelectric conversion efficiency (PCE). Herein, a flexible MoS2/SnO2‐based photocathode is developed via constructing a sunflower‐shaped light‐trapping nanostructure with 3D hierarchical and self‐supporting properties, enabled by the hierarchical embellishment of MoS2 nanosheets and SnO2 quantum dots on carbon cloth (MoS2/SnO2 QDs@CC). This structural design provides a favorable pathway for the effective separation of photogenerated electron‐hole pairs and the efficient storage of Zn2+ on photocathodes. Consequently, the PRZIB assembled with MoS2/SnO2 QDs@CC delivers a desirable capacity of 366 mAh g−1 under a light intensity of 100 mW cm−2, and achieves an ultra‐high PCE of 2.7% at a current density of 0.125 mA cm−2. In practice, an integrated battery system consisting of four series‐connected quasi‐solid‐state PRZIBs is successfully applied as a wearable wristband of smartwatches, which opens a new door for the application of PRZIBs in next‐generation flexible energy storage devices. [ABSTRACT FROM AUTHOR]

This article mainly proposes a similarity analysis method for the breakdown process of microwave argon plasma, which can easily obtain high-power microwave (HPM) breakdown features for argon plasma in microwave components with extremely large- or small-scale. The electromagnetic-plasma fluid model is proposed and solved by the finite element method. The preconditions for a similarity principle of gas breakdown in a microwave frequency band are proposed. In plasma breakdown regions with a proportional size, the ratio of incident microwave frequency f to gas pressure p (f/p) and reduced electric field (E/p) in them remain the same. Numerical results show that in the microwave frequency band, the breakdown process between similar structures also conforms to the similarity principle, especially after the argon plasma breakdown region is stabilized, numerical results are in good agreement with the theoretical values. The intensity of electric field is directly proportional to scale-down factor k, electron density is directly proportional to the square of scale-down factor k2, and electron energy is almost independent of scale-down factor k. Meanwhile, the distribution trends of electric field, electron density, and electron energy during the microwave argon breakdown process are also roughly the same, respectively. This research method can provide theoretical guidance for analyzing the HPM breakdown effect in extremely large or extremely small microwave components. [ABSTRACT FROM AUTHOR]