Search

Posterior shoulder instability (PSI) is defined by dynamic, recurrent and symptomatic partial or total loss of posterior joint contact. Anatomic risk factors comprise ligament hyperlaxity, glenoid retroversion or dysplasia, and high horizontal acromial morphology. Associated anatomic lesions comprise labrum lesions, posterior glenoid erosion and/or fracture, and anterior humeral head notching. We distinguish two subcategories of PSI: functional and structural, respectively without and with anatomic lesions. In both categories, there may be anatomic risk factors. Clinically, functional PSI involves reproducible asymptomatic voluntary subluxation or sometimes reproducible involuntary subluxation. Functional PSI implicates impaired external-rotation rotator cuff and scapular stabilizer muscle activity. Treatment is non-operative, by rehabilitation and shoulder pace maker. Structural shoulder instability involves anatomic lesions, often due to iterative microtrauma; pain is the most frequent symptom. It usually concerns young athletic subjects, but the clinical forms of structural and of anterior shoulder instability are not superimposable. Treatment may be surgical; arthroscopic labrum repair is effective in the absence of significant bone lesions, whereas otherwise posterior bone block is the treatment of choice. Surgical treatment of scapular features underlying structural PSI is improved by 3D preoperative planning, cutting guides and dedicated internal fixation systems. LEVEL OF EVIDENCE: expert opinion., Competing Interests: Declaration of competing interest The authors have no conflicts of interest in relation to this study., (Copyright © 2024 Elsevier Masson SAS. All rights reserved.)

Purpose: The aim of this study was to observe the effects of changing humeral tray thickness on the resultant of intraoperative glenohumeral joint loads using a load-sensing system (LSS)., Methods: An rTSA was performed on fresh frozen full-body cadaver shoulders by using an internal proprietary LSS on the humeral side. The glenohumeral loads (Newtons) and the direction of the resultant force applied on the implant were recorded during four standard positions (External rotation, Extension, Abduction, Flexion) and three "complex" positions of Activity Daily Life ("behind back", "overhead reach" and "across chest"). For each position, the thickness was increased from 0 to 6 mm in a continuous fashion using the adjustment feature of the humeral system. Each manoeuvre was repeated three times., Results: All shoulder positions showed a high repeatability of the glenohumeral load magnitude measured with an intra-class correlation coefficient of over 0.9. For each position, we observed a strong but no linear correlation between humeral tray thickness and joint loads. It was a cubical correlation (r s = 0,91) with a short ascending phase, then a plateau phase, and finally a phase with an exponential growth of the loads on the humeral implant. In addition, an increase in trail-poly thickness led to a recentering of force application at the interface of the two glenohumeral implants., Conclusion: This study provides further insight into the effects of humeral implant thickness on rTSA glenohumeral joint loads during different positions of the arm. Data obtained using this type of device could guide surgeons in finding the proper implant balance during rTSA., (© 2024. The Author(s) under exclusive licence to SICOT aisbl.)

Introduction: Femoral neck fractures constitute a public health problem due to significant associated morbidity and mortality amongst the ageing population. Perioperative blood loss can increase this morbidity. Blood loss, as well as the influence that the surgical approach exerts on it, remains poorly evaluated. We therefore conducted a retrospective comparative study in order to: (1) compare total blood loss depending on whether the patients were operated on using an anterior or posterior approach, (2) compare the transfusion rates, operating times and hospital stays between these two groups and, (3) analyze dislocation rates., Hypothesis: Total blood loss is greater from an anterior approach following a hip hemiarthroplasty for femoral neck fracture, compared to the posterior approach., Material and Methods: This retrospective single-center comparative study included 137 patients operated on by hip hemiarthroplasty between December 2020 and June 2021, and seven patients were excluded. One hundred and thirty patients were analyzed: 69 (53.1%) had been operated on via the anterior Hueter approach (AA) and 61 (46.9%) via the posterior Moore approach (PA). The analysis of total blood loss was based on the OSTHEO formula to collect perioperative "hidden" blood loss. The risk of early dislocation (less than 6 months) was also analyzed., Results: Total blood loss was similar between the two groups, AA: 1626±506mL versus PA: 1746±692mL (p=0.27). The transfusion rates were also similar between the two groups, AA: 23.2% versus PA: 31.1% (p=0.31) as well as the duration of hospitalization, AA: 8.5±3.2 versus PA: 8.2±3.3 days (p=0.54). The operating time was shorter in the PA group (Δ=10.3±14.1minutes [p<0.001]) with a greater risk of early dislocation when the patient was operated on by PA with AA: 9.8% versus PA: 1.4% (p=0.03)., Conclusion: This study does not demonstrate any influence of the approach (anterior or posterior) on total blood loss. Transfusion rates and length of hospitalization were similar between the groups with a slightly shorter operating time but a greater risk of early dislocations after posterior hemiarthroplasty in a population at high anesthesia-related risk., Level of Proof: III, comparative study of continuous series., (Copyright © 2024 Elsevier Masson SAS. All rights reserved.)

Hypothesis: Chronic epilepsy may cause important bipolar bony lesions. We aim to compare the specific pathoanatomic metrics of the bony lesions in chronic shoulder anterior instability that occur in patients with epilepsy vs. patients without epilepsy., Methods: From 2006 to 2020, we included epileptic and nonepileptic patients with anterior recurrent shoulder instability. We randomly adjusted the patients of the 2 groups according to the sex, age, and type of management. We included 50 patients. For each included patient, we performed an in-depth analysis and comparison of the glenoid bone loss based on the computed tomography scan: PICO method (patient/population, intervention, comparison and outcomes) using the best-fit circle; and the Hill-Sachs lesion: the depth and width were given as a percentage of the humeral head diameter on an axial view. We also evaluated the engaging character of the involved lesion using the on-track vs. off-track analysis. Those characteristics were compared between the 2 groups., Results: We found a glenoid bone loss in 32 patients. Glenoid bone loss was not significantly greater in patients with epilepsy (P = .052). A Hill-Sachs lesion was found in 42 patients (22 in the group with epilepsy and 20 in the group without epilepsy). Hill-Sachs lesions were significantly deeper and larger in the group with epilepsy (depth: 22% vs. 9%, P < .001; width: 43% vs. 28%, P = .003). In the group with epilepsy, 90% of the bone lesions were off-track vs. 30% in the group without epilepsy. Thus, the patients with epilepsy presented more engaging bony lesions than patients without epilepsy (P = .001) (OR = 23)., Conclusions: In a population of patients with epilepsy who had shoulder instability, Hill-Sachs lesions are larger and deeper than in normal patients with shoulder instability. By contrast, there is no significant difference regarding the characteristics of the glenoid bone loss if present. This implies that bone lesions in instable shoulders of patients with epilepsy need at least a bony stabilization procedure on the humeral side in the majority of cases., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

Background: We aim to predict a clinical difference in the postoperative range of motion (RoM) between 2 reverse shoulder arthroplasty (RSA) stem designs (Inlay-155° and Onlay-145°) using preoperative planning software. We hypothesized that preoperative 3D planning could anticipate the differences in postoperative clinical RoM between 2 humeral stem designs and by keeping the same glenoid implant., Methods: Thirty-seven patients (14 men and 23 women, 76 ± 7 years) underwent a BIO-RSA (bony increased offset-RSA) with the use of preoperative planning and an intraoperative 3-dimensional-printed patient-specific guide for glenoid component implantation between January 2014 and September 2019 with a minimum follow-up of 2 years. Two types of humeral implants were used: Inlay with a 155° inclination (Inlay-155°) and Onlay with a 145°inclination (Onlay-145°). Glenoid implants remained unchanged. The postoperative RSA angle (inclination of the area in which the glenoid component of the RSA is implanted) and the lateralization shoulder angle were measured to confirm the good positioning of the glenoid implant and the global lateralization on postoperative X-rays. A correlation between simulated and clinical RoM was studied. Simulated and last follow-up active forward flexion (AFE), abduction, and external rotation (ER) were compared between the 2 types of implants., Results: No significant difference in RSA and lateralization shoulder angle was found between planned and postoperative radiological implants' position. Clinical RoM at the last follow-up was always significantly different from simulated preoperative RoM. A low-to-moderate but significant correlation existed for AFE, abduction, and ER (r = 0.45, r = 0.47, and r = 0.57, respectively; P < .01). AFE and abduction were systematically underestimated (126° ± 16° and 95° ± 13° simulated vs. 150° ± 24° and 114° ± 13° postoperatively; P < .001), whereas ER was systematically overestimated (50° ± 19° simulated vs. 36° ± 19° postoperatively; P < .001). Simulated abduction and ER highlighted a significant difference between Inlay-155° and Onlay-145° (12° ± 2°, P = .01, and 23° ± 3°, P < .001), and this was also retrieved clinically at the last follow-up (23° ± 2°, P = .02, and 22° ± 2°, P < .001)., Conclusions: This study is the first to evaluate the clinical relevance of predicted RoM for RSA preoperative planning. Motion that involves the scapulothoracic joint (AFE and abduction) is underestimated, while ER is overestimated. However, preoperative planning provides clinically relevant RoM prediction with a significant correlation between both and brings reliable data when comparing 2 different types of humeral implants (Inlay-155° and Onlay-145°) for abduction and ER. Thus, RoM simulation is a valuable tool to optimize implant selection and choose RSA implants to reach the optimal RoM., (Copyright © 2024 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Background: Reverse shoulder arthroplasty (RSA) offers promising functional outcomes for young patients, yet challenges persist in restoring internal rotation (IR). This study aimed to assess the restoration of IR after RSA in patients younger than 60 years of age and analyze the factors affecting IR recovery., Methods: A retrospective multicenter study was conducted, examining the functional outcome of patients who underwent RSA, with a minimum follow-up period of 2 years. Two subgroups of patients who underwent primary RSA were analyzed separately with respect to active internal rotation with the elbow at the side (AIR1): "difficult AIR1" and "easy AIR1.", Results: The study included 136 patients (overall series) with a mean age of 51.6 years. The overall series showed statistically significant improvement in active range of motion (RoM), pain, and Constant scores, especially with active IR (p ​< ​0.01). According to etiology, statistically significant improvement (p ​< ​0.05) in active IR was observed for fracture sequelae, primary osteoarthritis, and rheumatoid arthritis, whereas no statistically significant improvement in IR was observed for tumor, revision, and cuff-tear arthropathy (p ​> ​0.05). In subgroup analysis, patients with easy AIR1 displayed a statistically significant lower body mass index and better Constant score mobility, as well as improved motion in forward elevation and active IR (p ​< ​0.05). No statistically significant associations were found between improved IR and prosthetic design or subscapularis repair. Scapular notch, lysis of the graft, and teres minor atrophy were significantly associated with better active IR (p ​< ​0.05)., Conclusion: RSA improves active RoM, pain, and functional outcomes in patients aged under 60. However, the degree of improvement in IR may vary depending on several factors and the underlying etiologies. These insights are crucial for patient selection and counseling, guiding RSA optimization efforts., Level of Evidence: IV., Competing Interests: Declaration of competing interest The authors declare that they have no conflict of interest in relation to the research, authorship, and/or publication of this work., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

Background: There are some major controversies surrounding the use and longevity of pyrocarbon interposition shoulder arthroplasty (PISA). The objective of this study was to investigate the long-term survival and outcomes (minimum 10-year) following PISA for osteoarthritis (OA) in young and active patients., Methods: This was a retrospective review of prospectively collected data of patients who underwent PISA (InSpyre; Tornier-Stryker) for OA between 2009 and 2012. Arthroplasty survival was known for 71 patients followed longitudinally for a minimum of 10 years. The clinical and radiologic outcomes were assessed in 62 patients (62 shoulders) reviewed with radiographs. The mean age at surgery was 60 years (range, 23-72 years), and 31 shoulders (50%) underwent prior surgery before PISA. The diagnosis was primary osteoarthritis (POA = 29), post-traumatic osteoarthritis (PTOA = 23), and postinstability osterarthritis (PIOA = 10). Clinical failure was defined as repeat surgical intervention involving prosthesis revision. Clinical outcomes were assessed with the Constant score (CS) and Subjective Shoulder Value (SSV). The mean duration of follow-up was 11 ± 0.6 years (range, 10-14 years)., Results: Overall, the survival rate was 90% (95% confidence interval [CI] 82.8-96.8) at 5 years and 87% (95% CI 79-94.8) at a 10-year follow-up. Survival was 100% in PTOA (type 1 fracture sequelae) and in PIOA as well as 95% in primary OA with type A glenoid. Revision surgery was significantly higher in biconcave (type B2) glenoid (44%) compared with concentric (type A) glenoid (2%), respectively (P = .002). Among the 7 patients who were revised to reverse shoulder arthroplasty, 5 had painful glenoid erosion and 2 had bipolar (glenoid and humeral) erosion with thinning and finally fracture of the greater tuberosity. Two shoulders with glenohumeral erosion were associated with secondary rotator cuff tears (1 supraspinatus and 1 subscapularis tear). The mean time to revision and revision was 4 ± 1.7 years. Glenoid wear was more often superior (81%) than central (19%), P < .001. For those shoulders not revised, the mean CS and SSV significantly increased from 39 ± 14 to 70 ± 14 points and 34% ± 15% to 75% ± 17%, respectively (P < .001)., Conclusion: PISA is an efficient and durable surgical procedure for the treatment of young and active patients with post-traumatic OA, postinstability OA, and primary OA with concentric (type A) glenoid erosion, but not for those with biconcave (type B2) glenoid. Biconcave (type B2) glenoid and subscapularis tear or insufficiency are risk factors for failure and revision., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

Background: Primary glenohumeral osteoarthritis is associated with both excessive posterior humeral subluxation (PHS) and excessive glenoid retroversion in 40% of cases. These morphometric abnormalities are a particular issue because they may be responsible for a deterioration in long-term clinical and radiologic outcomes. The aim of this study was to perform a computed tomographic (CT) analysis of patients who underwent total shoulder arthroplasty (TSA) for primary osteoarthritis (OA) with B2-, B3-, or C-type glenoids in whom an attempt was made to correct for excessive glenoid retroversion and excessive posterior humeral subluxation intraoperatively., Material: We performed a retrospective, single-center study including 62 TSA patients with a preoperative PHS of the glenohumeral joint (31 men, 31 women, 70 ± 9 years) between January 2000 and January 2014. Glenoids were classified as B2 (32 cases), B3 (13 cases), or C (17 cases). Glenoid retroversion was corrected by anterior asymmetric reaming. Patients were reviewed for clinical and CT scan assessment with a mean follow-up of 8.3 years (minimum 5 years). At final follow-up, the CT images were reconstructed in the scapular plane. A PHS index >65% defined persistence., Results: The revision-free rate was estimated at 93%. Correlation between PHS and retroversion was moderate preoperatively (ρ = 0.58) and strong at final follow-up (ρ = 0.73). Postoperative CT scans on average showed a surgical correction of PHS compared to preoperatively (79% vs. 65% respectively, P < .05) and retroversion (20° vs. 10° respectively, P < .05). At final follow-up, 25 of 62 patients had a persistence in the 2-dimensional (2D) model and 41 of 62 in the corrected 2D model. Persistence of PHS had no influence on clinical outcomes but did demonstrate a significantly higher glenoid loosening rate (20% vs. 59%, P < .05)., Conclusion: Correlation between PHS and retroversion was moderate preoperatively and strengthened at long-term follow-up. Anterior asymmetric reaming allowed for a surgical improvement of both PHS and retroversion, but it was not sufficient to maintain a correction over time. Glenoid loosening was more frequent in case of PHS persistence but seemingly without clinical relevance., (Copyright © 2024 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Background: The etiology of humeral posterior subluxation remains unknown, and it has been hypothesized that horizontal muscle imbalance could cause this condition. The objective of this study was to compare the ratio of anterior-to-posterior rotator cuff and deltoid muscle volume as a function of humeral subluxation and glenoid morphology when analyzed as a continuous variable in arthritic shoulders., Methods: In total, 333 computed tomography scans of shoulders (273 arthritic shoulders and 60 healthy controls) were included in this study and were segmented automatically. For each muscle, the volume of muscle fibers without intramuscular fat was measured. The ratio between the volume of the subscapularis and the volume of the infraspinatus plus teres minor (AP ratio) and the ratio between the anterior and posterior deltoids (AP deltoid ) were calculated. Statistical analyses were performed to determine whether a correlation could be found between these ratios and glenoid version, humeral subluxation, and/or glenoid type per the Walch classification., Results: Within the arthritic cohort, no statistically significant difference in the AP ratio was found between type A glenoids (1.09 ± 0.22) and type B glenoids (1.03 ± 0.16, P = .09), type D glenoids (1.12 ± 0.27, P = .77), or type C glenoids (1.10 ± 0.19, P > .999). No correlation was found between the AP ratio and glenoid version (ρ = -0.0360, P = .55) or humeral subluxation (ρ = 0.076, P = .21). The AP deltoid ratio of type A glenoids (0.48 ± 0.15) was significantly greater than that of type B glenoids (0.35 ± 0.16, P < .01) and type C glenoids (0.21 ± 0.10, P < .01) but was not significantly different from that of type D glenoids (0.64 ± 0.34, P > .999). When evaluating both healthy control and arthritic shoulders, moderate correlations were found between the AP deltoid ratio and both glenoid version (ρ = 0.55, P < .01) and humeral subluxation (ρ = -0.61, P < .01)., Conclusion: This in vitro study supports the use of software for fully automated 3-dimensional reconstruction of the 4 rotator cuff muscles and the deltoid. Compared with previous 2-dimensional computed tomography scan studies, our study did not find any correlation between the anteroposterior muscle volume ratio and glenoid parameters in arthritic shoulders. However, once deformity occurred, the observed AP deltoid ratio was lower with type B and C glenoids. These findings suggest that rotator cuff muscle imbalance may not be the precipitating etiology for the posterior humeral subluxation and secondary posterior glenoid erosion characteristic of Walch type B glenoids., (Copyright © 2024 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

We report here a rare case of an acute peripheral nerve compression by pseudotumoral calcinosis (PCT) at the right elbow in a patient with severe tertiary hyperaparathyroidism. This complication required urgent multidisciplinary management. Surgical decompression by PCT resection enabled rapid motor and sensory recovery., Competing Interests: There are none., (© 2024 Published by Elsevier Inc.)

Background: Three-dimensional (3D) preoperative planning is increasingly used in orthopaedic surgery. Two-dimensional (2D) characterization of distal radial deformities remains inaccurate, and 3D planning requires a reliable reference frame at the wrist. We aim to evaluate the reliability of the determination of anatomical points placed manually on 3D models of the radius to determine which of those points allow reliable morphometric measurements., Methods: Twenty-three radial scans were reconstructed in 3D. Five operators specialized in the upper limb manually positioned 8 anatomical points on each model. One of the operators repeated the operation 6 times. The anatomical points were based on previously published 3D models used for radial inclination and dorsopalmar tilt measurements. The repeatability and reproducibility of the measurements derived using this manual landmarking were calculated using different measurement methods based on the identified points. An error of ≤2° was considered clinically acceptable., Results: This study of intraobserver and interobserver variability of the anatomic points allowed us to determine the least variable and most accurately defined points. The middle of the ulnar border of the radius, the radial styloid, and the midpoint of the ulnar incisura of the radius were the least variable. The palmar and dorsal ends of the ridge delineating the scaphoid and lunate facets were the most variable. Only 1 of the radial inclination measurement methods was clinically acceptable; the others had a repeatability and reproducibility limit of >2°, making those measurements clinically unacceptable., Conclusions: The use of isolated points seems insufficient for the development of a wrist reference frame, especially for the purpose of measuring dorsopalmar tilt. If one concurs that an error of 2° is unacceptable for all distal radial measurements, then clinicians should avoid using 3D landmarked points, due to their unreliability, except for radial inclination measured using the radial styloid and the midpoint of the ulnar edge of the radius. A characterization of the wrist using 3D shapes that fit the articular surface of the radius should be considered., Level of Evidence: Diagnostic Level III . See Instructions for Authors for a complete description of levels of evidence., Competing Interests: Disclosure: The Disclosure of Potential Conflicts of Interest forms are provided with the online version of the article ( http://links.lww.com/JBJS/H783 )., (Copyright © 2023 by The Journal of Bone and Joint Surgery, Incorporated.)

Background: Acute compartment syndrome (ACS) of the lower limbs is a function-threatening event usually managed by extended dermofasciotomy. Closure of the skin may be delayed, creating a risk of complications when there is an underlying fracture. Early treatment at the pre-ACS stage might allow isolated fasciotomy with no skin incision. The primary objective of this study was to compare intracompartmental pressure (ICP) changes after fasciotomy and after dermofasciotomy. The secondary objectives were to evaluate potential associations linking the starting ICP to achievement of an ICP below the physiological cut-off of 10mm Hg and to determine whether the ICP changes after fasciotomy and dermofasciotomy varied across muscle compartments., Hypothesis: Fasciotomy with no skin incision may not provide a sufficient ICP decrease, depending on the initial ICP value., Material and Methods: A previously validated model of cadaver ACS of the lower limbs was used. Saline was injected gradually to raise the ICP to>15mmHg (ICP 15 ), >30mmHg (ICP 30 ), and >50mmHg (ICP 50 ). We studied 70 leg compartments (anterior, lateral, and superficial posterior) in 13 cadavers (mean age, 89.1±4.6years). ICP was monitored continuously. Percutaneous, minimally invasive fasciotomy consisting in one to three 1-cm incisions was performed in each compartment. ICP was measured before and after fasciotomy then after subsequent skin incision. The objective was to decrease the ICP below 10mmHg after fasciotomy or dermofasciotomy., Results: Overall, mean ICP was 37.8±19.1mmHg after the injection of 184.0±133.01mL of saline. In the ICP 15 group, the mean ICP of 16.1mmHg fell to 1.4mmHg after fasciotomy (ΔF=14.7) and 0.3mmHg after dermofasciotomy (ΔDF=1.1). Corresponding values in the ICP 30 group were 33.9mmHg, 4.7mmHg (ΔF=29.2), and 1.2mmHg (ΔDF=3.5); and in the ICP 50 group, 63.7mmHg, 17.0mmHg (ΔF=46.7), and 1.2mmHg (ΔDF=15.8). Thus, in the group with initial pressures >50mmHg, the ICP decrease was greater after both procedures, but fasciotomy alone nonetheless failed to achieve physiological values (<10mmHg). The pressure changes were not significantly associated with the compartment involved (anterior, lateral, or superficial posterior) (p<0.05)., Conclusion: Under the conditions of this study, higher baseline ICPs were associated with larger ICP drops after fasciotomy and dermofasciotomy. Nevertheless, when the baseline ICP exceeded 50mmHg, fasciotomy alone failed to decrease the ICP below 10mmHg. Adding a skin incision achieved this goal., Level of Evidence: IV, experimental study., (Copyright © 2023 Elsevier Masson SAS. All rights reserved.)

Purpose: One-stage bilateral shoulder arthroplasty has the advantage of requiring a single hospital stay and a single anaesthesia. The topic has been little reported, unlike one stage bilateral hip and knee arthroplasty, which have demonstrated their interest. The aim of the present study was to determine peri- and early post-operative morbidity and mortality after this procedure. The study hypothesis was that peri- and early post-operative morbidity and mortality in one stage bilateral shoulder arthroplasty is low in selected patients and that satisfaction is high., Methods: A single-centre retrospective study assessed peri- and early post-operative morbidity and mortality in one stage bilateral shoulder arthroplasty. Twenty-one patients, aged < 80 years, with ASA score ≤ 3, were consecutively operated on between 1999 and 2020. Indications comprised primary osteoarthritis, aseptic osteonecrosis, inflammatory arthritis, massive rotator cuff tear, and dislocation fracture, involving both shoulders., Results: There were no early deaths. The complication rate was 10% (4/21 cases). No prosthesis dislocation or sepsis was reported. Mean blood loss was 145 ± 40 cc, mean surgery time 164 ± 63 min, and mean hospital stay five ± four days. Only one patient required postoperative transfusion. Functional results at six months showed significantly improved range of motion and good patient satisfaction., Conclusions: One-stage bilateral shoulder arthroplasty was feasible in selected patients. Mortality was zero, and morbidity was low. Surgery time was reasonable and required no repositioning. Postoperative home help is indispensable for patient satisfaction during rehabilitation., (© 2023. The Author(s) under exclusive licence to SICOT aisbl.)

Introduction: The etiology of humeral posterior subluxation remains unknown, and it has been hypothesized that horizontal muscle imbalance could cause this condition. The objective of this study was to compare the ratio of anterior to posterior rotator cuff muscle and deltoid volumes as a function of humeral subluxation and glenoid morphology when analyzed as continuous variable in arthritic shoulders., Methods: Three hundred and thirty-three (273 arthritic and 60 healthy controls) CT scans of shoulders were included in this study and were segmented automatically. For each muscle, the volume of muscle fibers without intra-muscular fat was then measured. The ratio between the volume of the subscapularis and the volume of the infraspinatus + teres minor (AP ratio) and the ratio between the anterior and posterior deltoid (AP deltoid ) were calculated. Statistical analyses were performed to determine whether a correlation could be found between these ratios and glenoid version/ humeral subluxation/glenoid type in the Walch classification., Results: Within the arthritic cohort, no statistically significant difference was found between the AP ratio between A and type B glenoids (1.09 ± 0.22 versus 1.03 ± 0.16 p=0.09), between A and D type glenoids (1.09 ± 0.22 versus 1.12 ± 0.27, p=0.77) nor between the A and C type glenoids (1.09 ± 0.22 versus 1.10 ± 0.19, p=1). No correlation was found between AP ratio and glenoid version/humeral subluxation (rho =-0.0360, p=0.55; rho = 0.076; p=0.21). The AP deltoid ratio of type A glenoids was significantly greater than that of type B glenoids (0.48 ± 0.15 versus 0.35 ± 0.16, p< 0.01), and type C glenoids (0.48 ± 0.15 versus 0.21±0.10, p < 0.01) but not significantly different from the AP deltoid ratio of type D glenoids (0.48 ± 0.15 versus 0.64 ± 0.34, p=1). When evaluating both healthy control and arthritic shoulders, moderate correlations were found between AP deltoid ratio and glenoid version/humeral subluxation (rho=0.55, p<0.01; rho=-0.61, p<0.01)., Conclusion: As opposed to previous two-dimensional CT scan studies, we did not find any correlation between AP muscle volume ratio and glenoid parameters in arthritic shoulders. Therefore, rotator cuff muscle imbalance does not seem to be associated with posterior humeral subluxation leading to posterior glenoid erosion and subsequent retroversion characteristic of Walch B glenoids. However, our results could suggest that a larger posterior deltoid pulls the humerus posteriorly into posterior subluxation, but this requires further evaluation as the deltoid follows the humerus possibly leading to secondary asymmetry between the anterior and the posterior deltoid., (Copyright © 2023. Published by Elsevier Inc.)

Background: Glenoid bone loss (GBL) calculation in patients with shoulder instability has a wide variability in methods and their reliability. The purpose of this study was to describe and validate a new semi-automated software developed to improve GBL calculation using a 3D imaging modeling (IODA-shoulder) and to compare the method to the PICO area method., Patients and Methods: A semi-automated software to assess GBL was preliminarily developed and validated on 7 fresh frozen specimens (scapulae with artificially created glenoid defect), using water displacement method. Afterwards, the software was retrospectively used on CT images of 20 patients affected by recurrent shoulder dislocation. Inclusion criteria were: unilateral dislocation, minimum 2 dislocation episodes. Exclusion criteria were bone reconstruction of the glenoid, failed shoulder stabilization, bilateral dislocation, shoulder arthritis. Three-dimensional computed tomography images of bilateral shoulder were retrieved for each patient. Two methods to determine GBL were compared. The PICO surface area method and the new IODA method. We assessed the intra- and inter-rater reliability of the two methods with the Intraclass Correlation Coefficient (ICC), the Bland-Alman analysis, and Lin's concordance correlation coefficient (CCC)., Results: We did not find a statistically significant difference between the mean volumes calculated with PICO and IODA methods, respectively 914 vs. 815 mm 3 , p=0.155. The analysis carried out by using the traditional PICO method showed a lower concordance rate among four observers than the higher concordance found using IODA method, regardless of the size and the location of the defect. The ICC agreement with PICO was significantly lower than with IODA (0.76 vs. 0.97). We found a poor CCC with PICO (from 0.65 to 0.81) and a substantial one with IODA (from 0.96 to 0.98)., Discussion: The intra- and inter-rater reliability using IODA method is significantly better than PICO method. The assessment of GBL using IODA method is time saving, avoiding significant inter- and intra-observer variation, mainly due to individual skill and experience in the method., Level of Evidence: IV, experimental study., (Copyright © 2023 Elsevier Masson SAS. All rights reserved.)

Neer's classification for proximal humerus fractures (PHFs) uses 10 mm and 45° thresholds to distinguish displaced fragments. While this system was originally developed referencing 2D X-rays, fracture displacements occur in three dimensions. Our work aimed to develop a standardized and reliable computerized method for measuring PHF 3D spatial displacements. CT scans of 77 PHFs were analyzed. A statistical shape model (SSM) was used to generate the pre-fracture humerus. This predicted proximal humerus was then used as a "layer" to manually reduce fragments to their native positions and quantify translation and rotation in three dimensions. 3D computerized measurements could be calculated for 96% of fractures and revealed that 47% of PHFs were displaced according to Neer's criteria. Valgus and varus head rotations in the coronal plane were present in 39% and 45% of cases; these were greater than 45° in 8% of cases and were always associated with axial and sagittal rotations. When compared to 3D measurements, 2D methods underestimated the displacement of tuberosity fragments and did not accurately assess rotational displacements. The use of 3D measurements of fracture displacement is feasible with a computerized method and may help further refine PHF analysis and surgical planning.

Introduction: The purpose of this study was to analyze the real range of motion (RoM) measured in patients operated on for reverse shoulder arthroplasty (RSA) and compare it to the virtual RoM provided by the preoperative planning software., Hypothesis: There was a difference between virtual and real RoM, which can be explained by different factors, specifically the scapula-thoracic (ST) joint., Methods: Twenty patients with RSA were assessed at a minimum follow-up of 18 months. Passive RoM in forward elevation abduction, without and with manually locking the ST joint, and in external rotation with arm at side were recorded. The humerus, scapula, and implants were manually segmented on post-operative CTs. Post-operative bony structures were registered to preoperative bony elements. From this registration, a post-operative plan corresponding to the real post-operative implant positioning was generated and the corresponding virtual RoM analysis was recorded. On the post-operative anteroposterior X-rays and 2D-CT coronal planning view, the glenoid horizontal line angle (GH), the metaphyseal horizontal line angle (MH), and the gleno-metaphyseal angle (GMA) were measured to assess the extrinsic glenoid inclination, as well as the relative position of the humeral and glenoid components., Results: There were some significant differences between virtual and post-operative passive abduction and forward elevation, with (55° and 50°, p < 0.0001) or without ST joint participation (15° and 27°, p < 0.002). For external rotation with arm at side, there was no significant difference between planning (24° ± 26°) and post-operative clinical observation (19° ± 12°) ( p = 0.38). For the angle measurements, the GMA was significantly higher (42.8° ± 15.2° vs. 29.1°± 18.2°, p < 0.0001), and the GH angle, significantly lower on the virtual planning (85.2° ± 8.8° vs. 99.5° ± 12.5°, p < 0.0001), while the MH was not different ( p = 0.33)., Conclusions: The virtual RoM given by the planning software used in this study differs from the real post-operative passive RoM, except for external rotation. This can be explained by the lack of ST joint and soft tissues simulation. However, in focusing on the virtual GH participation, the simulation looks informative. Some modifications between the glenoid and humerus starting positions before running the motion analysis could be provided for making it more realistic and predictive of the RSA functional results., Level of Evidence: III.

Purpose: Clinical evaluation of the shoulder range of motion (RoM) may vary significantly depending on the surgeon. We aim to validate an automatic shoulder RoM measurement system associating image acquisition by an RGB-D (red/green/blue-depth) video camera to an artificial intelligence (AI) algorithm., Methods: Thirty healthy volunteers were included. A 3D RGB-D sensor that simultaneously generated a colour image and a depth map was used. Then, an open-access convolutional neural network algorithm that was programmed for shoulder recognition provided a 3D motion measure. Each volunteer adopted a randomized position successively. For each position, two observers made a visual (EyeREF) and goniometric measurement (GonioREF), blind to the automated software which was implemented by an orthopaedic surgeon. We evaluated the inter-tester intra-class correlation (ICC) between observers and the concordance correlation coefficient (CCC) between the three methods., Results: For manual evaluations EyeREF and GonioREF, ICC remained constantly excellent for the widest motions in the vertical plane (i.e., abduction and flexion). It was very good for ER1 and IR2 and fairly good for adduction, extension, and ER2. Differences between the measurements' means of EyeREF and shoulder RoM was significant for all motions. Compared to GonioREF, shoulder RoM provided similar results for abduction, adduction, and flexion and EyeREF provided similar results for adduction, ER1, and ER2. The three methods showed an overall good to excellent CCC. The mean bias between the three methods remained under 10° and clinically acceptable., Conclusion: RGB-D/AI combination is reliable in measuring shoulder RoM in consultation, compared to classic goniometry and visual observation., (© 2022. The Author(s) under exclusive licence to SICOT aisbl.)

Purpose: There is no consensus on the type of surgical treatment of congenital pseudarthrosis of the clavicle due to its rarity. The purpose of this study is to provide evidence in favor of a surgical technique and to explore factors correlated with bone consolidation., Methods: Systematic review of the literature and an analysis of the data for each subject, including all available subjects from the published series and clinical cases since 1990. Fisher's exact tests or T-tests were used to evaluate the effect of independent variables (age at surgery and type of treatment) on bone healing., Results: The literature search provides 305 articles; 30 were selected, reporting 191 patients and 194 clavicles. One hundred and fifty-one clavicles were operated on at a mean age of nine years and four months (from 8 months to 21 years). Thirteen clavicles (8, 6%) had not consolidated at the last follow-up. Concerning the type of fixation, the rate of healing was similar for plates and pins (p = 0.27). The rate of consolidation was higher with autograft than with allograft, xenograft, or no graft (p = 0.00001), and was 100% for vascularized graft. The mean age at surgery was higher for patients who healed at the last follow-up (118 vs. 61 months, p = 0.001)., Conclusion: In the event of surgical indication for congenital pseudarthrosis of the clavicle, it is recommended to perform autograft and stable fixation (level 4) after seven years old (level 4)., (© 2022. The Author(s) under exclusive licence to SICOT aisbl.)

The aim of this study was to evaluate the variation in measured glenoid inclination measurements between each of the most used methods for measuring the scapular transverse axis with computed tomography (CT) scans, and to investigate the underlying causes that explain the differences., Methods: The glenoid center, trigonum and supraspinatus fossa were identified manually by four expert shoulder surgeons on 82 scapulae CT-scans. The transverse axis was generated either from the identified landmarks (Glenoid-Trigonum line (GT-line), Best-Fit Line Fossa (BFLF)) or by an automatic software ( Y -axis). An assessment of the interobserver reliability was performed. We compared the measured glenoid inclination when modifying the transverse axis to assess its impact., Results: Glenoid inclination remained stable between 6.3 and 8.5°. The variations occurred significantly when changing the method that determined the transverse axis with a mean biase from -1.7 (BFLF vs. Y -axis) to 0.6 (BFLF vs. GT-line). The Y -axis method showed higher stability to the inclination variation ( p = 0.030). 9% of cases presented more than 5° of discrepancies between the methods. The manual methods presented a lower ICC (BFLF = 0.96, GT-line = 0.87) with the widest dispersion., Conclusion: Methods that determine the scapular transverse axis could have a critical impact on the measurement of the glenoid inclination. Despite an overall good concordance, around 10% of cases may provide high discrepancies (≥5°) between the methods with a possible impact on surgeon clinical choice. Trigonum should be used with caution as its anatomy is highly variable and more than two single points provide a better interrater concordance. The Y -axis is the most stable referential for the glenoid inclination.

Background: The aim of our study was to evaluate the accuracy of manual determination of the three key points defining the anatomical plane of the scapula, which conditions the reliability of planning software programs based on manual method., Method: We included 82 scapula computed tomography scans (56 pathologic and 26 normal glenoid), excluding truncation and major three-dimensional artifact. Four observers independently picked the three key points for each case. Inter- and intra-observer agreement was calculated for each point, using the intraclass correlation method. The mean error (mm) between the observers was calculated as the diameter of the smallest sphere including the four chosen positions., Results: Lower inter-observer agreement was found for the trigonum superoinferior position and for the glenoid center anteroposterior position. The mean positioning error between the four observers was 6.9 mm for the trigonum point, and error greater than 10 mm was recorded in 25% of the cases. The mean positioning error was 3.5 mm for the glenoid center in altered glenoid, compared to 1.8 mm for normal glenoid., Discussion: Manual determination of an anatomical plane of the scapula suffers from inaccuracy especially due to the variability in trigonum picking, and in a lesser extent, to the variability of glenoid center picking in altered glenoid., Competing Interests: Declaration of Conflicting Interests: The author(s) declared the following potential conflicts of interest with respect to the research, authorship, and/or publication of this article: Dr. Adrien JACQUOT is consultant for Tornier-Wright Medical and receives consulting fees. Dr. Marc-Olivier GAUCI is consultant for Tornier-Wright Medical and receives consulting fees. Manuel URVOY is an Employee of Imascap (Wright Medical). François BOUX DE CASSON is an Employee of Tornier – Wright Medical. Dr. Julien BERHOUET is consultant for Tornier-Wright Medical, and receives consulting fees. Dr. Hoel LETISSIER has no conflict of interest., (© 2021 The British Elbow & Shoulder Society.)

Background: Early glenohumeral impingement leads to poor range of motion and notching in reverse shoulder arthroplasty. The aim was to find from planning software which implant configuration provides the best motions in reverse shoulder arthroplasty., Patients and Methods: Reverse shoulder arthroplasty planning (Glenosys) was made in 31 patients (12 men, 19 women, 76 ± 6 yo) and impingements were analyzed. Inlay (155°-inclined) and Onlay (145°-inclined) humeral designs were tested. Four configurations were tested for each shoulder: "INLAY": non-lateralized glenoid-inlay humerus, "BIO-INLAY": lateralized glenoid (BIO-RSA)-inlay humerus, "ONLAY": non-lateralized glenoid-onlay humerus, and "BIO-ONLAY": lateralized (BIO-RSA) glenoid-onlay humerus., Results: BIO-ONLAY and BIO-INLAY groups presented a significantly better result in all tested motion ( p  < 0.001 for all tests). BIO-ONLAY allowed a significantly better external rotation, extension and adduction than BIO-INLAY with decreased impingements with the pilar. BIO-INLAY presented a significantly better abduction. In abduction, an abutment of the greater tuberosity against the acromion was associated with a lower range of motion ( p  < 0.0001) and did not depend on the lateralization., Conclusion: Glenoid lateralization delays the glenohumeral impingement in reverse shoulder arthroplasty and gives the best rotations, adduction and extension when associated with neutral inclination and humeral 145° inclination. Greater tuberosity abutment has to be avoided in abduction and the Inlay design provides the best abduction., Competing Interests: Declaration of Conflicting Interests: The author(s) declared the following potential conflicts of interest with respect to the research, authorship, and/or publication of this article: Marc-Olivier Gauci, Julien Berhouet, Adrien Jacquot, Gilles Walch, and Pascal Boileau are consultants for Wright-Medical—Tornier Inc and Imascap and did not receive any financial payments or other benefits from any commercial entity related to the subject of this article. Jean Chaoui is an employee of Wright Medical—Tornier Inc and Imascap., (© 2021 The British Elbow & Shoulder Society.)

Background: Variations in humeral component designs in hemiarthroplasty and anatomic total shoulder arthroplasty cases can impact the degree of difficulty during a revision surgery that necessitates the removal of the humeral stem. However, no metric exists to define stem extraction effort nor to identify associated factors that contribute to extraction difficulty. The purpose of this study is to describe a method to quantify stem extraction difficulty and to define features that will impact the effort during stem removal., Methods: This was a retrospective review of 58 patients undergoing revision of hemiarthroplasty or anatomic total shoulder arthroplasty requiring stem extraction. Each included patient had existing preoperative radiographic examination, an intraoperative video of the stem removal process, and explants available for analysis by 3 surgeons. The following factors were assessed for the impact on extraction difficulty: (1) preoperative features such as cement use, fill of proximal humerus, and stem design features; (2) intraoperative data on extraction time and bone removal; and (3) postoperative findings related to extraction artifacts (EAs). A scoring system was established to distinguish easy (Easy group) and difficult (Difficult group) stem removal cases and further used to identify the features that may affect intraoperative difficulty of stem removal., Results: The Difficult group accounted for 26% (15/58) of the study population with an 18-minute average stem extraction time, average EA count of 69, and 35 mm of bone removed. The Easy group accounted for 74% (43/58) of patients, with a 4-minute average extraction time, average EA count of 23, and 10 mm of bone removed. Logistic regression model was able to correctly classify 82% of the cases, explaining 26.7% of the variance in humeral stem removal with cement and proximal coating variables. The likelihood of cemented stem removal being difficult is 5 times greater compared to an uncemented stem, and having proximal coating doubles the likelihood of a difficult stem removal compared to cases with no coating., Conclusions: Quantifying stem extraction difficulty is possible with intraoperative video as well as explant analysis. Preoperative features of the fixation type and specific features of stem design such as proximal coating will impact difficulty of stem extraction., (Copyright © 2022 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Introduction: In the context of reverse shoulder arthroplasty, some parameters of glenoid baseplate placement follow established golden rules, while other parameters still have no consensus. The assessment of glenoid wear in the future location of the glenoid baseplate varies among surgeons. The objective of this study was to analyze the inter-observer reproducibility of glenoid baseplate 3D positioning during virtual pre-operative planning., Method: Four shoulder surgeons planned the glenoid baseplate position of a reverse arthroplasty in the CT scans of 30 degenerative shoulders. The position of the glenoid guide pin entry point and the glenoid baseplate center was compared between surgeons. The baseplate's version and inclination were also analyzed., Results: The 3D positioning of the pin entry point was achieved within ± 4 mm for nearly 100% of the shoulders. The superoinferior, anteroposterior and mediolateral positions of the baseplate center were achieved within ± 2 mm for 77.2%, 67.8% and 39.4% of the plans, respectively. The 3D orientation of the glenoid baseplate within ± 10° was inconsistent between the four surgeons (weak agreement, K=0.31, p=0.17)., Discussion: The placement of the glenoid guide pin was very consistent between surgeons. Conversely, there was little agreement on the lateralization, version and inclination criteria for positioning the glenoid baseplate between surgeons. These parameters need to be studied further in clinical practice to establish golden rules. Three-dimensional information from pre-operative planning is beneficial for assessing the glenoid deformity and for limiting its impact on the baseplate position achieved by different surgeons., Level of Evidence: III. Case control study., (Copyright © 2021. Published by Elsevier Masson SAS.)

Introduction: The arm change position (ACP) is a new parameter for evaluating the humerus' 3D displacement following reverse shoulder arthroplasty (RSA) during 3D pre operative planning. The purpose of this study was to analyze the relationship between ACP variations after RSA and simulated passive joint mobility. The assumption is that the ACP will to help optimize the passive joint mobility of a RSA implant., Methods: In 30 degenerative shoulders, four shoulder surgeons planned a RSA with virtual motion analysis. After this analysis, each plan was revised to optimize the range of motion. Relationships between the differences in movement amplitude and the differences in ACP were evaluated., Results: Arm lengthening and humerus lateralization were significantly associated with better joint mobility in all three planes (frontal, sagittal and axial). They were equally important for improving external rotation, extension, flexion and adduction. Anterior displacement of the humerus improved both internal and external rotation., Discussion: The ACP is a useful preoperative planning parameter for RSA. It could help with selecting the best implant combination, as well as determining their position, in order to optimize the simulated passive mobility relative to humerus displacement after RSA. To validate the value of the ACP in clinical practice, a prospective study is needed in which the postoperative joint mobility is measured in vivo as a function of the ACP., Level of Evidence: III, case control study., (Copyright © 2022 Elsevier Masson SAS. All rights reserved.)

Clindamycin is an antibiotic with high bioavailability and appropriate bone diffusion, often proposed as an alternative in guidelines for C. acnes prosthetic joint infections. We aimed to evaluate the efficacy of clindamycin in the treatment of C. acnes shoulder implant joint infections (SIJI)., Methods: A retrospective analysis was conducted at the University Hospital of Nice (France) between 2010 and 2019. We included patients with one shoulder implant surgical procedure and at least one C. acnes positive sample. We selected the C. acnes SIJI according to French and international recommendations. The primary endpoint was favorable outcome of C. acnes SIJI treatment after at least 1-year follow-up in the clindamycin group compared to another therapeutic group., Results: Forty-eight SIJI were identified and 33 were treated with clindamycin, among which 25 were treated with monotherapy. The median duration of clindamycin antibiotherapy was 6 weeks. The average follow-up was 45 months; one patient was lost to follow-up. Twenty-seven patients out of 33 (82%) were cured with clindamycin, compared to 9/12 (75%) with other antibiotics. The rate of favorable outcomes increased to 27/31 (87%) with clindamycin and to 9/10 (90%) for other antibiotics when no septic revision strategies were excluded ( P = 1.00)., Conclusions: The therapeutic strategy based on one- or two-stage revision associated with 6 weeks of clindamycin seems to be effective.

Background: The Neer classification is among the most widely used systems to describe proximal humerus fractures (PHF) despite the poor interobserver agreement. The purpose of this study was to verify whether or not blinded shoulder surgeons and trainees agree with the authors of articles published in the highest impact-factor orthopedic journals., Methods: All articles regarding PHF published between 2017 and 2019 in the top 10 orthopedic journals as rated by impact factor were searched. Articles were included if the authors used the Neer classification to describe at least 1 PHF in the figures. Figures were extracted without the legend, and X-rays ± computed tomography scan images were included when available. An international survey was conducted among 138 shoulder surgeons who were asked to record the Neer classification for each de-identified radiograph in the publications. The type of fracture mentioned in the legend of the published figure was considered as the gold standard., Results: Survey participants agreed with the published article authors in 55% of cases overall (range 6%-96%, n = 35). The most common response disagreed with the article authors in 13 cases (37%), underestimating the number of parts in 11 of 13 cases. The interobserver agreement between the 138 responders was fair (k = 0.296). There was an association between the percentage of concordant answers and greater experience (number of years of shoulder surgery practice) of the responders ( P  = .0023). The number of parts, the number or type of available imaging modalities, and the geographic origin of participants did not influence the agreement between responders and authors., Discussion: In more than one-third of cases, specialized shoulder surgeons disagree with article authors when interpreting the Neer classification of de-identified images of PHF in published manuscripts. Morphologic classification of PHF as the sole basis for treatment algorithms and surgical success should be scrutinized., (© 2022 The Author(s).)

The interest of patient-specific guides (PSGs) lies in reliable intraoperative achievement of preoperative planning goals. They are a form of instrumentation optimizing intraoperative precision and thus improving the safety and reproducibility of surgical procedures. Clinical superiority, however, has not been demonstrated. The various steps from design to implementation leave room for error, which needs to be known and controlled by the surgeon who is responsible for final outcome. Instituting large-scale patient-specific surgery requires management systems for guides and innovative implants which cannot be a simple extension of current practices. We shall approach the present state of knowledge regarding PSGs via 5 questions: (1) What is a PSG? Single-use instrumentation produced after preoperative planning, aiming exclusively to optimize procedural exactness. (2) How to use and assess PSGs in orthopedic surgery? Strict rules of use must be adhered to. Any deviation from the predefined objective is, necessarily, an error that must be identified as such. (3) Do PSGs provide greater surgical exactness? The contribution of PSGs varies greatly between procedures. Exactness is enhanced in the spine, in osteotomies around the knee and in bone-tumor surgery. In the shoulder, their contribution is seen only in complex cases. Data are sparse for hip replacement, and controversial for knee replacement. (4) What are the expected benefits of PSGs? As well as improving exactness, PSGs allow a lower radiation dose and shorter operating time. They also enable junior surgeons to train in techniques otherwise reserved to hyperspecialists. (5) How to include PSGs in everyday practice? As well as their potential clinical interest, PSGs involve deep changes in organization, equipment provision and economic model. LEVEL OF EVIDENCE: V; expert opinion., (Copyright © 2021 Elsevier Masson SAS. All rights reserved.)

Background: Various implant designs have been proposed to increase active range of motion (ROM) and avoid notching in patients treated by reverse total shoulder arthroplasty (RSA). The purpose of this study was to investigate the efficacy and safety of an onlay prosthesis design combining a 135° humeral neck-shaft angle with the glenoid component lateralized and inferiorized., Methods: A retrospective descriptive study was conducted of the clinical and radiological outcomes at the final follow-up (≥24 months) of all RSAs performed by the same surgeon between September 2015 and December 2016 in the study center. At the last follow-up, patients were clinically assessed for ROM, Constant score, and subjective shoulder value and radiologically for scapular notching and glenoid radiolucent lines. Patients were followed up radiographically at 1 month and clinically at between 6 and 12 months (midterm) and again at between 24 and 48 months (final follow-up). Scapular notching was graded as per the Sirveaux classification at the last follow-up on anterior-posterior radiographs., Results: Seventy-nine RSAs were included with a mean follow-up time of 31 months. The mean Constant score at the final follow-up was 42 points higher than before surgery (69 vs. 27, P  < .001). There were also significant postoperative improvements in ROM (active anterior elevation, active external rotation, and active internal rotation). The final means for motions were 133° for active anterior elevation, 32° active external rotation, and level 7 for active internal rotation. The overall notching rate was 3% (2/67), and there were no cases of severe notching. Radiolucent lines were observed in 8 of 70 prostheses (11.5%) around the peg, and they were observed in 9 prostheses (13%) around the screws. Among the 79 RSAs included, there were 11 complications (13.9%) (two infections, two fractures, four cases of glenoid component loosening, and three cases of instability), 2 reoperations, and 4 prosthesis revisions., Conclusion: This study shows that an RSA design with a 135° humeral neck-shaft angle and an inferiorized and lateralized glenoid component is associated with significant improvements in active ROM, especially in rotation, and a low notching rate. However, rates of 3.8% for dislocation and 5% for glenoid loosening are certainly a concern at such a short follow-up of two years. Future studies with a larger population are needed to confirm these rates., (© 2022 The Author(s).)

Hypothesis: The purpose was to report the short-term outcomes and survival of hemiarthroplasty with a pyrocarbon head (HA-PYC) for the treatment of shoulder osteoarthritis in patients aged ≤ 60 years. We hypothesized that HA-PYC could be an alternative to hemi-metal (avoiding the risk of rapid glenoid erosion) and total shoulder arthroplasty (TSA) (avoiding the risk of rapid glenoid loosening) in an active patient population., Methods: Sixty-four consecutive patients (mean age, 53 years) who underwent HA-PYC for glenohumeral osteoarthritis were included. The primary outcome was revision to TSA or reverse shoulder arthroplasty. Secondary outcome measures included functional outcome scores; return to work and sports; and radiographic evaluation of humeral reconstruction quality using the "circle method" of Mears, as well as glenoid erosion severity and progression using the Sperling classification. Patients were reviewed and underwent radiography at an average follow-up of 33 months (range, 24-60 months)., Results: At last follow-up, the rate of survival of the HA-PYC prosthesis was 92%. Revision was performed in 5 patients, with a mean delay of 24 months (range, 15-37 months): 1 conversion to TSA and 4 conversions to reverse shoulder arthroplasty. The Constant score and Subjective Shoulder Value increased from 36 points (range, 26-50 points) to 75 points (range, 69-81 points) and from 35% (range, 20%-50%) to 80% (range, 75%-90%), respectively (P < .001). Postoperatively, 91% of the patients (42 of 46) returned to work and 88% (15 of 17) returned to sport. The severity of preoperative and postoperative glenoid wear (Sperling grade 3 or 4) had no influence on the functional results. Patients who underwent associated concentric glenoid reaming (n = 23) had similar Constant scores and Subjective Shoulder Values (P = .95) to other patients and did not show more progression of glenoid wear. Nonanatomic reconstruction of the proximal humerus (center of rotation of the prosthesis > 3 mm from the anatomic center) occurred in 29% (18 of 62 patients) and was associated with significantly lower functional and subjective results, more complications (subscapularis insufficiency and/or symptomatic glenoid erosion), and a higher risk of revision. The additional 1.5-mm thickness of the metal disc under the pyrocarbon head was found to be the main reason for oversizing of the prosthetic head., Conclusion: HA-PYC is a reliable procedure to treat shoulder osteoarthritis and allows return to work and sports in a young (≤60 years) and active patient population. The severity of glenoid bone erosion or the association with glenoid reaming does not affect functional outcomes and failure risk. By contrast, nonanatomic reconstruction of the proximal humerus after HA-PYC (because of humeral head oversizing) occurred in one-third of the cases and is associated with lower functional outcomes, as well as higher risks of complications and revision., (Copyright © 2021 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Background: Several studies have already reported good short-term results with a pyrocarbon unipolar radial head prosthesis (Pyc-uRHP). The aim was to evaluate the evolution from mid- to long-term clinical and radiographic outcomes of a Pyc-uRHP., Methods: This was a retrospective, single-center study. We followed up all the patients who underwent Pyc-uRHP surgery in our original study at 2 years of follow-up (52 patients), reaching a minimum of 7 years of clinical and radiologic follow-up. This study included 26 patients who underwent a clinical examination assessing mobility, the Mayo Elbow Performance Score, and the visual analog scale score and radiologic evaluation with anteroposterior and profile radiographs at a mean follow-up of 110 months (range, 78-162 months). The radiologic study analyzed signs of proximal osteolysis, stem loosening, capitellar wear, and humeroulnar osteoarthritis., Results: No patients required revision. Eight patients required reoperation: coronoid screw removal in 1 and arthrolysis for stiffness in 7. The mean time to reoperation was 11 months. The mean Mayo Elbow Performance Score at last follow-up was 96 ± 9 (of 100), with a pain score of 42 ± 7 (of 45), mobility score of 19 ± 2 (of 20), stability score of 10 (of 10), and function score of 25 (of 25). Comparison with clinical data from the mid-term delay did not reveal any significant difference. All patients presented with proximal osteolysis around the neck but without progression. No stem loosening was noted. The rates of humeroulnar osteoarthritis (12% at mid-term vs. 80% at last follow-up, P < .0001) and capitellar lesions (34% at mid-term vs. 80% at last follow-up, P = .001) increased significantly., Conclusion: We have shown that a Pyc-uRHP at 9 years' follow-up provided stable and satisfactory clinical results. Osteolysis of the radial neck was always present but it did not evolve, and no stem loosening was noted. Finally, we have shown a clear worsening of radiologic humeroulnar osteoarthritis and capitellar lesions that remained asymptomatic., (Copyright © 2021 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Background: An assessment of the pathoanatomic parameters of the arthritic glenohumeral joint (GHJ) has the potential to identify discriminating metrics to differentiate glenoid types in shoulders with primary glenohumeral osteoarthritis (PGHOA). The aim was to identify the morphometric differences and threshold values between glenoid types including normal and arthritic glenoids with the various types in the Walch classification. We hypothesized that there would be clear morphometric discriminators between the various glenoid types and that specific numeric threshold values would allow identification of each glenoid type., Methods: The computed tomography scans of 707 shoulders were analyzed: 585 obtained from shoulders with PGHOA and 122 from shoulders without glenohumeral pathology. Glenoid morphology was classified according to the Walch classification. All computed tomography scans were imported in a dedicated automatic 3D-software program that referenced measurements to the scapular body plane. Glenoid and humeral modeling was performed using the best-fit sphere method, and the root-mean-square error was calculated. The direction and orientation of the glenoid and humerus described glenohumeral relationships., Results: Among shoulders with PGHOA, 90% of the glenoids and 85% of the humeral heads were directed posteriorly in reference to the scapular body plane. Several discriminatory pathoanatomic parameters were identified: GHJ narrowing < 3 mm was a discriminatory metric for type A glenoids. Posterior humeral subluxation > 70% discriminated type B1 from normal GHJs. The root-mean-square error was a discriminatory metric to distinguish type B2 from type A, type B3, and normal GHJs. Type B3 glenoids differed from type A2 by greater retroversion (>13°) and subluxation (>71%). The type C glenoid retroversion inferior limit was 21°, whereas normal glenoids never presented with retroversion > 16°., Conclusion: Pathoanatomic metrics with the identified threshold values can be used to discriminate glenoid types in shoulders with PGHOA., (Copyright © 2021 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Aim: To demonstrate how reverse shoulder arthroplasty (RSA) planning software could be used to improve how the trainees position glenoid and humeral implants and obtain optimal simulated range of motion (ROM)., Methods: We selected four groups of five various level participants: medical student (MS), junior resident (JR), senior resident (SR), and shoulder expert (SE). Thereafter, the 20 participants planned five cases of arthritic shoulders for a RSA on a validated planning software following three phases: (1) no guidelines and no ROM feedback, (2) guidelines but no ROM feedback, and (3) guidelines and ROM feedback. We evaluated the final simulated impingement-free ROM, the choice of the implant (baseplate size, graft, glenosphere), and the glenoid implant positioning., Results: MS planning were significantly improved by the ROM feedback only. JR took the best advantage of both guidelines and ROM in final results. SR planning were less performant than SE into phase 1 regarding flexion, external rotation, and adduction (respectively - 10°, p = 0.03; - 11°, p = 0.003; and - 3°, p = 0,03), but reached similar results into phase 3 (respectively - 2°, p = 0.329; - 4°, p = 0.44; - 2°, p = 0.319). For MS, JR, and SR, we observed a systematic improvement in the agreement over the study course. The glenoid diameter remained highly variable even for SE. Comparing glenoid implant position to SE, the distance error decreased with advancing phases., Conclusion: Planning software can be used as a simulation training tool to improve implant positioning in shoulder arthroplasty procedures., (© 2021. SICOT aisbl.)

Purpose: The goal of this study was to assess the clinical outcomes associated with anatomic healing of the greater tuberosity in patients treated for proximal humerus fractures with reverse shoulder arthroplasty. Our hypothesis was that anatomic healing of the greater tuberosity leads to less complications and better functional outcomes., Methods: RESULTS: Patients from the GT+ group presented better functional outcomes than the GT- group in all evaluated outcomes. Mean constant score was 61 ± 14 versus 56 ± 15, and the subjective shoulder value (SSV) was 77 ± 14 versus 64 ± 21 (p < 0.001). Forward elevation was 128° ± 28° versus 107° ± 30° and external rotation was 23° ± 17° versus 14° ± 17° (p < 0.001). Twenty patients presented with at least one prosthetic dislocation (7 GT+ vs 13 GT-) while nine patients were revised for humeral loosening (1 GT+ vs 8 GT-). The use of a fracture specific humeral stem was associated with a higher rate of greater tuberosity healing., Conclusions: Non-anatomic healing of the greater tuberosity was associated with a higher dislocation and humeral loosening rate. Anatomic healing of the greater tuberosity lead to better functional outcomes, less humeral-sided complications, and fewer re-operations.

Introduction: Outpatient surgery in France is defined by the national authority for health (HAS) as a scheduled surgery enabling same-day discharge without any increased risk to the patient. With the advent of enhanced recovery after surgery, outpatient lower limb arthroplasty has become a common procedure. However, only 1.1% of knee arthroplasties in France were performed on an outpatient basis in 2017., Objectives: 1) assess early morbidity and mortality after outpatient shoulder arthroplasties to validate eligibility and safety criteria; and 2) assess patient acceptance of outpatient surgery., Methods: A single-center study with the following inclusion criteria: primary shoulder arthroplasty, American Society of Anesthesiology (ASA) score I or II, no cognitive impairment, and no coronary artery or thromboembolic diseases. Analgesia was provided by bupivacaine via a peripheral nerve catheter in the first 72 hours followed by oral analgesics. Patients were discharged if the post-anesthetic discharge scoring system (PADSS) was>9/10 and the visual analog scale (VAS) was<5/10. Postoperative telephone interviews were carried out on D1, D2 and D3 to assess pain with the numerical rating scale and to collect data on their analgesic consumption. All patients were seen by an independent observer at one and six months for a clinical and radiologic follow-up and at 90 days during a consultation with the senior surgeon. The primary endpoint was the 90-day morbidity and mortality rate (readmissions, rehospitalizations, and minor and major complications). A satisfaction questionnaire was collected at one and six months., Results: Thirty-six patients were offered an outpatient shoulder arthroplasty between February 2016 and February 2018: 12 (33%) refused with no valid reasons and 24 patients agreed to the procedure (seven hemiarthroplasties, nine anatomic shoulder arthroplasties and eight reverse shoulder arthroplasties). The mean age at surgery was 70 years (55-82), mean body mass index (BMI) was 26 (21-32) and 14 patients were ASA II (66%). Three patients (12%) refused same-day discharge despite a PADSS score>9/10 and adequate pain management. Two patients (8%) were not discharged home on the same day as the surgery for medical reasons (one for pain and one for high blood pressure). No readmissions or complications were reported for the 19 outpatient arthroplasties. None of the outpatients used opioids. All patients were satisfied with their functional outcome, 84% were satisfied with the outpatient management and 17% felt they were insufficiently monitored and regretted that they were not hospitalized., Conclusions: 1) outpatient shoulder arthroplasty can be safely proposed to selected patients with low comorbidities, regardless of their age and type of implant; 2) the acceptance rate for outpatient shoulder arthroplasty remained low among our patient population. These results should incite us to better educate patients about outpatient surgery., Level of Evidence: IV; retrospective study., (Copyright © 2021. Published by Elsevier Masson SAS.)

Isolated pathology of the long head of the biceps is an indication for biceps tenotomy. To date, needle arthroscopy allows a direct diagnosis of shoulder lesion. We aimed to evaluate the technical feasibility of an in-office biceps isolated tenotomy by needle arthroscopy. Advantages were found in the fast-track process and the high rate of satisfaction in our selected patients. It was also a way to correct the diagnosis of torn biceps missed by the imaging. However, performing this procedure requires previous experience in conventional arthroscopy and should not be performed on anxious patients. Further studies will be necessary to confirm the reproducibility of this promising method, which could be a valuable alternative to heavy in-operating room process., (© 2021 by the Arthroscopy Association of North America. Published by Elsevier.)

Aims: The aim of this study was to identify risk factors for recurrent instability of the shoulder and assess the ability to return to sport in patients with engaging Hill-Sachs lesions treated with arthroscopic Bankart repair and Hill-Sachs remplissage (ABR-HSR)., Methods: This retrospective study included 133 consecutive patients with a mean age of 30 years (14 to 69) who underwent ABR-HSR; 103 (77%) practiced sports before the instability of the shoulder. All had large/deep, engaging Hill-Sachs lesions (Calandra III). Patients were divided into two groups: A (n = 102) with minimal or no (< 10%) glenoid bone loss, and B (n = 31) with subcritical (10% to 20%) glenoid loss. A total of 19 patients (14%) had undergone a previous stabilization, which failed. The primary endpoint was recurrent instability, with a secondary outcome of the ability to return to sport., Results: At a mean follow-up of four years (1.0 to 8.25), ten patients (7.5%) had recurrent instability. Patients in group B had a significantly higher recurrence rate than those in group A (p = 0.001). Using a multivariate logistic regression, the presence of glenoid erosion of > 10% (odds ratio (OR) = 35.13 (95% confidence interval (CI) 8 to 149); p = 0.001) and age < 23 years (OR = 0.89 (0.79 to 0.99); p = 0.038) were associated with a higher risk of recurrent instability. A total of 80 patients (78%) could return to sport, but only 11 athletes (65%) who practiced high-risk (collision or contact-overhead) sports. All seven shoulders which were revised using a Latarjet procedure were stable at a mean final follow-up of 36 months (11 to 57) and returned to sports at the same level., Conclusion: Patients with subcritical glenoid bone loss (> 10%) and younger age (≤ 23 years) are at risk of failure and reoperation after ABR-HSR. Furthermore, following this procedure, one-third of athletes practicing high-risk sports are unable to return at their pre-instability level, despite having a stable shoulder. Cite this article: Bone Joint J  2021;103-B(4):718-724.

Background: Three-dimensional (3D) geometry of the normal glenohumeral bone anatomy and relations is poorly documented. Our aims were (1) to determine the 3D geometry of the normal glenohumeral joint (GHJ) with reference to the scapular body plane and (2) to identify spatial correlations between the orientation and direction of the humeral head and the glenoid., Methods: Computed tomographies (CTs) of the normal, noninjured GHJ were collected from patients who had undergone CTs in the setting of (1) polytrauma, (2) traumatic head injury, (3) chronic acromioclavicular joint dislocations, and (4) unilateral trauma with a contralateral normal shoulder. We performed 3D segmentation and measurements with a fully automatic software (Glenosys; Imascap). Measurements were made in reference to the scapular body plane and its transverse axis. Geometric measurements included version, inclination, direction, orientation, best-fit sphere radius (BFSR), humeral subluxation, critical shoulder angle, reverse shoulder angle, glenoid area, and glenohumeral distance. Statistical correlations were sought between glenoid and humeral 3D measurements (Pearson correlation)., Results: A total of 122 normal GHJs (64 men, 58 women, age: 52 ± 17 years) were studied. The glenoid BFSR was always larger than the humerus BFSR (constant factor of 1.5, standard deviation = 0.2). The mean glenoid version and inclination were -6° ± 4° and 7° ± 5°, respectively. Men and women were found to have significantly different values for inclination (6° vs. 9°, P = .02), but not for version. Humeral subluxation was 59% ± 7%, with a linear correlation with glenoid retroversion (r = -0.70, P < .001) regardless of age. There was a significant and linear correlation between glenoid and humeral orientation and direction (r = 0.72 and r = 0.70, P < .001)., Conclusion: The 3D geometry of the glenoid and humeral head present distinct limits in normal shoulders that can be set as references in daily practice: version and inclination are -6° and 7°, respectively, and humeral posterior subluxation is 59%; interindividual variations, regardless of the size, are relative to the scapular plane. There exists a strong correlation between the position of the humeral head and the glenoid orientation and direction., (Copyright © 2020 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Background: Cuff tear arthropathy (CTA) is characterized by superior migration of the humeral head with superior erosion of the glenoid. Rarely, humeral head migration can be anteroinferior with associated anterior erosion of the glenoid, a pattern described by Favard as the type E4 glenoid. The purpose of this retrospective imaging study was to analyze the 2D and 3D characteristics of the E4 glenoid., Methods: A shoulder arthroplasty database of 258 cuff tear arthropathies was examined to identify patients with an E4 type deformity. This resulted in a study cohort of 15 females and 2 males with an average age of 75 years. All patients had radiographs and CT scans available for analysis. CT-scan DICOM (Digital Imaging and Communications in Medicine) data were uploaded to a validated three-dimensional (3D) imaging software. Muscle fatty infiltration, glenoid measurements (anteversion, inclination), and humeral head subluxation according to the scapular plane were determined., Results: The mean anteversion and inclination of the E4 cohort were 32° ± 14° and -5° ± 2, respectively. The mean anterior subluxation was 19% ± 16%. All cases had severe grade 3 or 4 fatty infiltration of the infraspinatus, whereas only 65% had grade 3 or 4 subscapularis fatty infiltration. A significant correlation existed between glenoid anteversion and humeral head subluxation ( p < 0.001), but no correlation was found with muscle fatty infiltration. The CT analysis demonstrated an acquired erosive biconcave morphology in 11 patients (65%) and monoconcavity in 6 patients (35%)., Conclusion: The E4 type glenoid deformity in cuff tear arthropathy is characterized by an anterior erosion and anteversion associated with anterior subluxation of the humeral head., Competing Interests: The authors declare no conflict of interest.

Background: Glenoid lateralization has been shown to be the most imortant factor in maximizing passive range of motion and shoulder stability while preventing scapular impingement and notching. We aimed to evaluate mid- to long-term functional and radiologic outcomes after bony increased-offset-reverse shoulder arthroplasty (BIO-RSA) using a Grammont-style (medialized) humeral implant., Methods: The study included 143 consecutive shoulders (140 patients; mean age, 72 years) treated with a BIO-RSA for rotator cuff deficiency. A cylinder of autologous cancellous bone graft, harvested from the humeral head, was placed between the reamed glenoid surface and baseplate; fixation was achieved using a long central peg (25 mm) and 4 screws. A large baseplate (29 mm) with a small baseplate sphere (36 mm) was used in 77% of cases, and a Grammont-style (medialized) humeral implant with 155° of inclination was used in all cases. All patients underwent clinical and radiographic assessment at a minimum of 5 years after surgery; in addition, 86 cases (60%) underwent computed tomography scan assessment., Results: At a mean follow-up of 75 months (range, 60-126 months), the survivorship of the BIO-RSA using revision as an endpoint was 96%. No cases of dislocation or humeral loosening were observed. Overall, 118 patients (83%) were either very satisfied (61%) or satisfied (22%). The adjusted Constant score improved from 40% ± 18% to 93% ± 23%, and the Subjective Shoulder Value improved from 31% ± 15% to 77% ± 18% (P < .001). The humeral bone graft incorporated completely in 96% of cases (137 of 143). Severe inferior scapular notching (grade 3 or 4) occurred in 18% (24 of 136). The risk of postoperative notching correlated to a lower body mass index (P < .05), superior glenosphere inclination (P = .02), and high or flush glenosphere positioning (P = .035)., Conclusions: BIO-RSA is a safe and effective technique to lateralize the glenoid, providing consistent bone graft healing, excellent functional outcomes, a low revision rate, and a high rate of patient satisfaction. Thin patients (with a low body mass index) and glenosphere malposition (with persistent superior inclination and/or insufficient lowering of the baseplate and sphere) are associated with higher risk of scapular notching.Our data confirm the importance of implanting the baseplate with a neutral inclination (reverse shoulder arthroplasty angle < 5°) and with sufficient glenosphere inferior overhang (>5 mm) in preventing scapular notching. The use of a less medialized humeral implant (135° or 145° inclined) and smaller (25-mm) baseplate (when using a small, 36-mm sphere) should allow reduction in the incidence of scapular notching., (Copyright © 2020. Published by Elsevier Inc.)

We retrospectively compared results of 27 wrists with bicolumnar arthrodesis with mean follow-up of 67 months to 28 wrists with three-corner arthrodesis adding triquetral excision with mean follow-up of 74 months in 54 patients (55 wrists). Minimal follow-up was 2 years for all patients. Capitolunate nonunion occurred in three wrists with bicolumnar arthrodesis and six wrists with three-corner arthrodesis, and radiolunate arthritis developed in four wrists with three-corner arthrodesis. Among patients with bicolumnar arthrodesis, hamatolunate arthritis occurred in seven wrists, all with a Viegas type II lunate; and pisotriquetral arthritis occurred in three wrists. At mean 5 years after surgery, 45 wrists had not needed revision surgery, and both groups had similar revision rates. The wrists with three-corner arthrodesis and bicolumnar arthrodesis had similar functional outcomes, and range of wrist motion was not significantly different between the two groups. We concluded that bicolumnar arthrodesis results in greater longevity than three-corner arthrodesis for a type I lunate. We do not recommend bicolumnar arthrodesis for type II lunate. We also concluded that three-corner arthrodesis has a greater incidence of radiolunate arthritis and capitolunate nonunion. Level of evidence: III.

Background: Scapulothoracic arthrodesis (STA) has been proposed for the treatment of painful scapular winging in patients with facioscapulohumeral muscular dystrophy (FSHD). However, the rate of osseous fusion is variable, and there is a theoretical risk of reduced respiratory function after bilateral STA., Methods: This was a retrospective study of 10 STAs, performed sequentially, in 5 FSHD patients. The surgical technique involved use of a semitubular plate and wire construct with autograft (iliac crest) interposed between the scapula and rib cage. Osseous fusion, respiratory function, and shoulder function were evaluated. The mean follow-up period was 141 ± 67 months (range, 24-225 months)., Results: Early complications included 1 pneumothorax and 1 pleural effusion. No late complications occurred, and no patients underwent reoperation. On postoperative computed tomography images, complete bony union of the scapula to the ribs was observed in 90% of shoulders (9 of 10). Comparison of preoperative and postoperative pulmonary function test results showed no significant difference in vital capacity (from 87% ± 14% to 85% ± 12%) and forced vital capacity (from 86% ± 16% to 77% ± 15%). Patients gained on average 40° of active forward elevation (from 62° ± 20° to 102° ± 4°) and 22° of abduction (from 58° ± 21° to 89° ± 7°) (P < .001). The mean Subjective Shoulder Value increased from 25% ± 8% to 72% ± 18% (P < .001). All patients were pleased with the results and would recommend the procedure to other persons., Conclusion: In patients with FSHD, bilateral STA provides satisfactory shoulder function with a high rate of scapulothoracic fusion and few or no significant respiratory repercussions., (Copyright © 2019. Published by Elsevier Inc.)

Background: Our aim was to analyze the epidemiology, etiologies, and revision options for failed shoulder arthroplasty from 2 tertiary centers., Methods: From 1993 to 2013, 542 failed arthroplasties were revised in 540 patients (65% women): 224 hemiarthroplasties (HAs, 41%), 237 anatomic total shoulder arthroplasties (TSAs, 44%) and 81 reverse total arthroplasties (RSAs, 15%). Data about patients, pathology, and reintervention procedures, as well as intraoperative data, were analyzed from our 2 local registries that prospectively captured all the revision procedures. Patients had an average follow-up period of 8.7 years., Results: The revision rate was 12.7% for HAs, 6.7% for TSAs, and 3.9% for RSAs. HAs were revised earlier (33 ± 40 months) than RSAs (47 ± 150 months) and TSAs (69 ± 61 months). Glenoid failure was a major cause of reintervention: erosion in HAs (29%) or loosening in TSAs (37%) and RSAs (24%). Instability was another major cause of reintervention: 32% in RSAs, 20% in TSAs, and 13% in HAs. Humeral implant loosening led to revision in 10% of RSAs, 6% of HAs, and 6% of TSAs. Multiple reinterventions were required in 21% of patients, mainly for instability (26%) and/or infection (25%). The final implant was an RSA in 48%, especially when associated with cuff insufficiency, instability, and/or bone loss. Final reimplantation was possible in 90% of cases, with the remaining 10% treated with a resection or spacer., Conclusion: Glenoid failure and instability are the most common causes of revision. Soft-tissue insufficiency and/or infection results in multiple revisions. Surgeons must recognize all complications so that they can be addressed at the first revision operation and avoid further reinterventions. RSA was the most common final revision implant., (Copyright © 2019. Published by Elsevier Inc.)

Volar plating is one of the most used surgical treatments for dorsally displaced extra-articular distal radius fractures. However, the reduction of the dorsal tilt can be difficult. It usually requires a flexion maneuver of the wrist while maintaining and screwing the plate, which is cumbersome. Plate positioning also is a crucial step and is sometimes difficult because of the large size of the plate relative to the width of the distal radius. We use an epiphysis-first technique. We place all the epiphyseal screws before reduction, and then we take advantage of the anatomical shape of a locking plate to automatically reduce the dorsal tilt by fixing the proximal radius to the plate with cortical compression screws. To ensure easy and accurate positioning of the plate, we drill a distal medial pilot hole in a free-hand fashion 10 mm proximal to the watershed line and 10 mm lateral to the medial rim of the radius, without positioning the plate. This allows a clear view of the location of this first hole. The locking plate is then applied to the distal radius with help of a monocortical non-locking screw, and it is controlled under fluoroscopy. When this medial pilot hole is properly positioned and the plate correctly tilted on the anteroposterior view, the remaining epiphyseal holes are filled with locking screws. Then the plate is fixed on the proximal radius with bicortical compression screws, allowing an automatic reduction of the epiphyseal dorsal tilt. We believe this technique is a safe and reproducible way to position volar plates and to reduce anatomically the dorsal tilt in extra-articular posteriorly displaced distal radius fractures (AO A2 and A3). Furthermore, the automatic fracture reduction provided by this technique decreases operation time and radiation., Competing Interests: Declaration of Competing Interest Dr Chelli has nothing to disclose. Dr Bronsard has nothing to disclose. Pr Gonzalez has nothing to disclose. Dr Blasco has nothing to disclose. Dr Gauci is paid consultant for Wright (USA). Pr Boileau is paid consultant for Wright (USA) and has received royalties for the design of shoulder implants. All the authors, their immediate families and any research foundations with which they are affiliated have not received any financial payments or other benefits from any commercial entity related to the subject of this article. No funding was received for this study., (Copyright © 2020 Elsevier Ltd. All rights reserved.)