Search

Monolayer molybdenum disulfide has been previously discovered to exhibit non-volatile resistive switching behavior in a vertical metal-insulator-metal structure, featuring ultra-thin sub-nanometer active layer thickness. However, the reliability of these nascent 2D-based memory devices was not previously investigated for practical applications. Here, we employ an electron irradiation treatment on monolayer MoS2 film to modify the defect properties. Raman, photoluminescence, and X-ray photoelectron spectroscopy measurements have been performed to confirm the increasing amount of sulfur vacancies introduced by the e-beam irradiation process. The statistical electrical studies reveal the reliability can be improved by up to 1.5× for yield and 11× for average DC cycling endurance in the devices with a moderate radiation dose compared to unirradiated devices. Based on our previously proposed virtual conductive-point model with the metal ion substitution into sulfur vacancy, Monte Carlo simulations have been performed to illustrate the irradiation effect on device reliability, elucidating a clustering failure mechanism. This work provides an approach by electron irradiation to enhance the reliability of 2D memory devices and inspires further research in defect engineering to precisely control the switching properties for a wide range of applications from memory computing to radio-frequency switches. [ABSTRACT FROM AUTHOR]

Recently, various two-dimensional materials have been reported to exhibit non-volatile resistance switching phenomenon. The atomristors, featuring memristor effect in atomically thin nanomaterials such as monolayer transition metal dichalcogenides and hexagonal boron nitride, have drawn much attention due to the extremely thin active layer thickness with the advantages of forming-free characteristic, large on/off resistance ratio and fast switching speed. To investigate the switching mechanisms in the 2D monolayers, we introduced an electrical characterization method by current sweeping to illustrate the detailed information hidden in the commonly used voltage-sweep curves. Multiple transition steps have been observed in the SET process of MoS2-based resistance switching devices. The different behaviors of transition steps were attributed to the number of defects or vacancies associated with the switching phenomenon, which is consistent with the previously reported conductive-bridge-like model for 2D atomristors. This work provides an approach using current sweeping to precisely characterize the resistance switching effect and inspires further research to optimize the defect distribution in 2D materials for the applications in multi-bit non-volatile memory and neuromorphic computing. [ABSTRACT FROM AUTHOR]

MoS 2 has been reported to exhibit a resistive switching phenomenon in a vertical metal-insulator-metal (MIM) structure and has attracted much attention due to its ultra-thin active layer thickness. Here, the resistance evolutions in the high resistance state (HRS) and low resistance state (LRS) are investigated under constant voltage stress (CVS) or constant current stress (CCS) on MoS 2 resistive switching devices. Interestingly, compared with bulk transition metal oxides (TMO), MoS 2 exhibits an opposite characteristic in the fresh or pre-RESET device in the "HRS" wherein the resistance will increase to an even higher resistance after applying CVS, a unique phenomenon only accessible in 2D-based resistive switching devices. It is inferred that instead of in the highest resistance state, the fresh or pre-RESET devices are in an intermediate state with a small amount of Au embedded in the MoS 2 film. Inspired by the capability of both bipolar and unipolar operation, positive and negative CVS measurements are performed and show similar characteristics. In addition, it is observed that the resistance state transition is faster when using higher electric stress. Numerical simulations have been performed to study the temperature effect with small-area integration capability. These results can be explained by a modified conductive-bridge-like model based on Au migration, uncovering the switching mechanisms in the ultrathin 2D materials and inspiring future studies in this area., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Recently, various two-dimensional materials have been reported to exhibit non-volatile resistance switching phenomenon. The atomristors, featuring memristor effect in atomically thin nanomaterials such as monolayer transition metal dichalcogenides and hexagonal boron nitride, have drawn much attention due to the extremely thin active layer thickness with the advantages of forming-free characteristic, large on/off resistance ratio and fast switching speed. To investigate the switching mechanisms in the 2D monolayers, we introduced an electrical characterization method by current sweeping to illustrate the detailed information hidden in the commonly used voltage-sweep curves. Multiple transition steps have been observed in the SET process of MoS 2 -based resistance switching devices. The different behaviors of transition steps were attributed to the number of defects or vacancies associated with the switching phenomenon, which is consistent with the previously reported conductive-bridge-like model for 2D atomristors. This work provides an approach using current sweeping to precisely characterize the resistance switching effect and inspires further research to optimize the defect distribution in 2D materials for the applications in multi-bit non-volatile memory and neuromorphic computing.

Recently, non-volatile resistance switching or memristor (equivalently, atomristor in atomic layers) effect was discovered in transitional metal dichalcogenides (TMD) vertical devices. Owing to the monolayer-thin transport and high crystalline quality, ON-state resistances below 10 Ω are achievable, making MoS 2 atomristors suitable as energy-efficient radio-frequency (RF) switches. MoS 2 RF switches afford zero-hold voltage, hence, zero-static power dissipation, overcoming the limitation of transistor and mechanical switches. Furthermore, MoS 2 switches are fully electronic and can be integrated on arbitrary substrates unlike phase-change RF switches. High-frequency results reveal that a key figure of merit, the cutoff frequency (f c ), is about 10 THz for sub-μm 2 switches with favorable scaling that can afford f c above 100 THz for nanoscale devices, exceeding the performance of contemporary switches that suffer from an area-invariant scaling. These results indicate a new electronic application of TMDs as non-volatile switches for communication platforms, including mobile systems, low-power internet-of-things, and THz beam steering.

Recently, two-dimensional (2D) atomic sheets have inspired new ideas in nanoscience including topologically protected charge transport,1,2 spatially separated excitons,3 and strongly anisotropic heat transport.4 Here, we report the intriguing observation of stable nonvolatile resistance switching (NVRS) in single-layer atomic sheets sandwiched between metal electrodes. NVRS is observed in the prototypical semiconducting (MX 2 , M = Mo, W; and X = S, Se) transitional metal dichalcogenides (TMDs),5 which alludes to the universality of this phenomenon in TMD monolayers and offers forming-free switching. This observation of NVRS phenomenon, widely attributed to ionic diffusion, filament, and interfacial redox in bulk oxides and electrolytes,6-9 inspires new studies on defects, ion transport, and energetics at the sharp interfaces between atomically thin sheets and conducting electrodes. Our findings overturn the contemporary thinking that nonvolatile switching is not scalable to subnanometre owing to leakage currents.10 Emerging device concepts in nonvolatile flexible memory fabrics, and brain-inspired (neuromorphic) computing could benefit substantially from the wide 2D materials design space. A new major application, zero-static power radio frequency (RF) switching, is demonstrated with a monolayer switch operating to 50 GHz.