Search

The rGO/CMC/β-CD (RCβ) hydrogel was synthesized from reduced graphene oxide (rGO), β-cyclodextrin (β-CD) and sodium carboxymethyl cellulose (CMC) by radical polymerization. A novel hydrogel adsorbent was created by growing the metal-organic framework (Cu-BTC) in-situ on RCβ hydrogel, which has excellent adsorption capacities for cationic dyes in wastewater. The adsorption parameters such as the amount of adsorbent, pH of solution and adsorption time were optimized through batch adsorption experiments. Under the optimal conditions of pH 6.0, adsorbent dosage of 0.01 g and experimental temperature of 25 °C, Langmuir isothermal model was used to fit the maximum adsorption capacities of methylene blue (MB), crystal violet (CV) and malachite green (MG), which were 892.66, 842.75 and 633.77 mg g -1 , respectively. The fitting results of adsorption kinetics revealed that the pseudo-second-order model can describe the adsorption process better. Based on proposed studies, the dye molecules were adsorbed onto RCβ@Cu-BTC hydrogel mainly through electrostatic interaction, hydrogen bonding and π-π interactions. After five cycles, the adsorption efficiency of the RCβ@Cu-BTC hydrogel for MB, CV and MG can still reach 80 %, 77 % and 72 %, which shows that the adsorbent has good adsorption performance. Various adsorption experiments show that RCβ@Cu-BTC hydrogel has great potential in treating dye wastewater., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Two thermochromic poplar-based composites, TPC-1 and TPC-2, were fabricated using a crystal violet lactone (CVL)/lactic acid/myristyl alcohol ternary mixture. The mass ratios for TPC-1 and TPC-2 were 10: 3: 200 and 10: 80: 200, respectively. TPC-1 exhibits a common thermochromic property, reversibly changing color from blue to the natural hue of poplar within the temperature range of 28-48 °C. In contrast, TPC-2 demonstrates a novel thermochromic behavior, shifting from light blue to dark blue within the range of 30-52 °C. This work elucidates the correlations between the distinctive mass ratios in the ternary mixtures, the resulting CVL structures, and the consequent thermochromic properties. The blue TPC-1 exhibits an open lactone ring with a HO-C=O in its CVL structure. Similarly, the light-blue TPC-2 displays an open lactone ring with a HO-C=O. However, the dark-blue TPC-2 features an open lactone ring with a HO-C=O and a C-O-C. TPC-2 is a ternary mixture encapsulated with a poplar-based cellulose/lignin/SiO 2 framework. This integrated framework chemically interacts with the ternary mixture, enhancing phase-changing properties, heat-saving capabilities and mechanical properties of TPC-2. Consequently, TPC-2 is a promising candidate for applications as a temperature-responsive, thermal energy-storing, and structural material in building interiors., Competing Interests: Declaration of competing interest I have nothing to declare., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The adsorptive potential of starch nanocrystals (SNCs) was evaluated for the elimination of methylene blue (MB), crystal violet (CV), and malachite green (MG) from aqueous media in single, binary, and ternary dye systems using batch mode experiments. SNCs were extracted using mild acid hydrolysis to remove the amorphous parts of native granular starch, and they were characterized using different physicochemical methods, such as FESEM, XRD, FTIR, BET, TGA, and pH ZPC . The results revealed that the optimal pH for dye removal in both single and mixed dye systems was found to be 9.0. The equilibrium time increased from 5 to 20 min when the system was changed from single to binary, and then further increased to 30 min when the system was changed to ternary. The equilibrium data for single-dye systems exhibited a good fit with the Langmuir isotherm model (R 2  > 0.98, SEE <3.52 mg g -1 ), whereas for binary and ternary dye mixtures, the extended Langmuir model provided an accurate representation of the experimental data (R2 > 0.99, SEE <1.33 mg g -1 ). Among the single, binary, and ternary systems, the highest adsorption capacities were observed for MB, MB in the (MB + MG) binary system, and MB in the (MB + CV + MG) ternary system. The respective adsorption capacities were recorded as 79.55 mg g -1 , 61.91 mg g -1 , and 43.59 mg g -1 . The adsorption of dyes onto the SNCs was inherently spontaneous and endothermic, and adhered to the pseudo-second-order kinetic model in single dye systems as well as mixed dye systems. It can be concluded that the SNCs are capable of being utilized for five consecutive cycles in the adsorption-desorption process for single dye systems and three consecutive cycles for mixed dye systems. This suggests that the SNCs have potential as a sustainable and efficient option for dye removal in mixture systems., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this paper, a natural Moroccan material from the Nador area in the north east of Morocco was studied as an adsorbent to remove methyl violet 2B dye from aqueous solutions. This material has never been studied before in this region, and it will be used in its raw state. It was collected and characterized by X-ray diffraction, FTIR spectroscopy, scanning electron microscopy, X-ray fluorescence, thermal analysis, N 2 gas adsorption-desorption, pH PZC , and Brunauer-Emmett-Teller (BET). The studies are realized with a 500-µm grain size and 182m 2 /g BET surface area. XRD showed the presence of significant peaks belonging to natural zeolite type clinoptilolite-Ca and minor phases. Several parameters were studied such as contact time, adsorbent mass, initial dye concentration, initial pH solution, the particle size of the material, and temperature. Out of the three isotherm models investigated after 60 min of contact time in the experiments, the Langmuir model gave the best fit to the experimental data (R 2  = 0.99). The results of kinetic and thermodynamic studies revealed that the adsorption process obeyed pseudo-second-order, spontaneous (ΔG° < 0), endothermic (ΔS° > 0). The adsorption of methyl violet 2B dye is chemisorptions and physisorption. The maximum theoretical adsorption capacity was 30.30 mg·g -1 at 23 °C for a particle diameter of 500 µm. The desorption study shows that the material can be desorbed using solvents. The reuse study indicates that the same amount of natural zeolite can be used several times which makes the process efficient and sustainable. The obtained results indicate that the country of Morocco has natural zeolite among its resources and that it can be used as an efficient adsorbent for the removal of dyes., Competing Interests: Declarations. Ethical approval: Not applicable. Consent to participate: Not applicable. Consent to publish: Not applicable. Competing interests: The authors declare no competing interests., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Concerned about water treatment, it is of great importance to present new approaches for improving photocatalytic activity. Since photocatalysis is ubiquitous in almost all chemical manufacturing processes, the development of photocatalytic systems carries significance for our environment. In this regard, three different amounts of covalent organic frameworks decorated with titanium(IV) oxide nanoparticles (TiO 2 /COF hybrids) in Alginate-Carboxymethyl cellulose (Alg-CMC) blend matrix were prepared under ultrasound irradiation, which Citric acid and Calcium chloride acted as two green cross-linkages. Based on the physio-chemical analyses of these bio-nanocomposite (bio-NC) beads, the Alg-CMC blend polymer appeared to be the best candidate for a disparity of TiO 2 /COF hybrids. Not only did COF aid to increase the distribution of TiO 2 nanoparticles, but it declined the bandgap energies. The resultant Alg-CMC/TiO 2 /COF (TiO 2 /COF = 15:6) bio-NC beads demonstrated efficient photodegradation activity towards Methyl violet (MV) under Ultraviolet light. The obtained results of scavenger studies indicated that superoxide radicals and electron agents played a major role in MV degradation. Further investigation confirmed that single oxygen addition and N-de-methylation could be two important pathways for the decomposition of MV by these bio-NC beads., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Cationic synthetic dyes are one of the hazards in aqueous solutions that can affect the health of humans and living organisms. In the current work, polyacrylamide (PAM)-g-gelatin hydrogel and modified PAM-g-gelatin hydrogel using activated carbon of Luffa cylindrica (ACL) and ACL/Mg-Fe LDH were applied to eliminate crystal violet (CV), a cationic dye, from water media. The hydrogels were synthesized using free radical polymerization approach, and the hydrogels were characterized using FTIR, XRD, TGA-DTG, BET, SEM, and EDX-Map. The surface area of ACL, ACL/Mg-Fe LDH, PAM-g-gelatin, PAM-g-gelatin/ACL, and PAM-g-gelatin/ACL/Mg-Fe LDH were 99.71, 141.99, 0.74, 1.47, and 1.65 m 2 /g, respectively, which shows that the presence of ACL and ACL/Mg-Fe LDH improved the area of the hydrogels. The maximum abatement of CV using PAM-g-gelatin (92.81%), PAM-g-gelatin/ACL (95.71%), and PAM-g-gelatin/ACL/Mg-Fe LDH (98.25%) was obtained at pH = 9, temperature 25 °C, 10 mg/L CV, 60 min time, and adsorber dose of 2 g/L (for PAM-g-gelatin) and 1.5 g/L (other samples). The value of thermodynamic factors confirmed that the abatement process is exothermic and spontaneous. The kinetics data followed the pseudo-second kinetic (PSO) model. The Langmuir isotherm model had a more remarkable ability to describe the equilibrium data. The maximum adsorption capacity for PAM-g-gelatin, PAM-g-gelatin/ACL, and PAM-g-gelatin/ACL/Mg-Fe LDH was determined 35.45, 39.865, and 44.952 mg/g, respectively. Generally, the studied hydrogels can eliminate dyes from wastewater and be used as effective adsorbers., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Crystal violet (CV) residues in Marine food have produced a severe health threat in human life. In this study, we proposed a semiconductor surface-enhanced Raman scattering (SERS) sensor of corrosion-resistant Polyaniline/Graphene oxide (PPy/GO) film by electrochemical growth method to detect CV residues in fresh fish tissue. A PPy/GO dispersion solution was one-step deposited on a stainless steel sheet surface by electrochemical polymerization process to form a PPy/GO composite film acting as a semiconductor SERS substrate. Since the substrate of PPy/GO film was mainly composed of GO sheet without other metals, it had a good corrosion resistance. The SERS enhancement factor and charge transfer intensity P CT of PPy/Go SERS substrate for CV molecules were up to 1.18 × 10 6 and 0.903, respectively. Furthermore, the limit of detection (LOD) of PPy/GO SERS substrate could reach 1.58 nM. In addition, SERS sensor of PPy/GO film could identify CV residues in fresh fish tissues, and its recovery rate was 91.8 %-107 %. This preparing method and detecting method we proposed PPy/GO SERS substrate provide a new pathway for detecting CV residues in Marine food., Competing Interests: Declaration of competing interest We declare that we have no financial and personal relationships with other people or organizations that can inappropriately influence our work, there is no professional or other personal interest of any nature or kind in any product, service or company that could be construed as influencing the position presented in, or the review of, the manuscript entitled., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this work, polyvinylidene fluoride (PVDF) intercalated CuFe layered double hydroxides (LDH) membranes were fabricated and investigated for UV-LED/persulfate degradation of methylene blue (MB), crystal violet (CV), methyl orange (MO), and Eriochrome black T (EBT) dyes from water. The PVDF-CuFe membrane exhibited improved heterogeneity, surface functionality (CuO, Fe-O, Cu-O-Fe), surface roughness, and hydrophilicity. The process parameters were optimized by response surface methodology, and maximum MB removal (100%) was achieved within 45.22-178.5 min at MB concentration (29.45-101.93 mg/L), PP concentration (0.5-2.41 g/L) and catalyst dosage (1.84-1.95 g/L). The degradation kinetics was well described by a pseudo-first-order model (R 2  = 0.982) and fast reaction rate (0.029-0.089/min). The MB dye degradation mechanism is associated with HO·/SO 4 •- reactive species generated by Fe 3+ /Fe 2+ or Cu 2+ /Cu + in PVDF-CuFe membrane and PP dissociation. The PVDF-CuFe membrane demonstrated excellent recyclability performance with a 12% reduction after five consecutive cycles. The catalytic membrane showed excellent photocatalytic degradation of crystal violet (100%), methyl orange (79%), and Eriochrome black T (60%). The results showed that UV-LED/persulfate-assisted PVDF-CuFe membranes can be used as a recyclable catalyst for the effective degradation of dye-contaminated water streams., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

In this research, aluminum metal-organic framework encapsulated with poly (itaconic acid) grafted crosslinked chitosan composite sponge (Al-MOF@PIC) was prepared. SEM, FTIR, XPS, XRD, and BET techniques were employed to thoroughly characterize the synthesized material and establish its structure and characteristics. The study discovered that the Al-MOF@PIC is an efficient way to remove dyes, which constitute a significant number of contaminants in industrial wastewater. Subsequently the adsorption of methyl violet 2B (MV-2B) dye, the surface area, pore size, and pore volume of the adsorbent decreased from 1860.68 m 2 /g, 1.62 nm, and 1.52 cc/g to 1426.45 m 2 /g, 1.11 nm, and 0.92 cc/g, individually. This modification suggested that a portion of the MV-2B dye had been removed by adsorption over the adsorbent's pores. The excellent adsorption capacity of the material was further confirmed by batch adsorption tests, which displayed a maximum adsorption capability of 646.76 mg/g for the elimination of MV-2B dye. The high adsorption energy of 26.8 kJ/mol designates that chemisorption is primarily responsible for MV-2B dye adsorption against the sponge adsorbent. The Al-MOF@PIC composite sponge demonstrated exceptional reusability over six cycles, demonstrating its strength and durability. The Al-MOF@PIC composite sponge successfully removes MV-2B from water by pore filling, π-π stacking, hydrogen bonding, and electrostatic interactions, which are the key mechanisms behind the adsorption of the dye pollutant. Its potential for practical applications is further demonstrated using Box Behnken-design (BBD) to optimize the adsorption consequences., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In today's world, major pollutants, such as cationic dyes and heavy metals, pose a serious threat to human health and the environment. In this study, a novel adsorbent was created through the electrospinning of polyvinyl alcohol/polyacrylic acid (PVA/PAA), incorporated with hexagonal boron nitride (hBN) coated with polydopamine (PDA). The integration of hBN and PDA substantially enhanced the adsorption capacity of the PVA/PAA fibers, making them highly effective in adsorbing cationic dyes such as methylene blue and crystal violet, as well as cobalt (II) ions, from contaminated water. The adsorbents were assessed to understand how their adsorption behavior varies with pH, as well as to examine their adsorption kinetics and isotherms. The results indicate that the PVA/PAA-hBN@PDA adsorbent has maximum adsorption capacities of 1029.57 mg/g, 793.65 mg/g, and 62.46 mg/g for methylene blue, crystal violet, and cobalt (II) ions, respectively. This underscores the superior performance of the PVA/PAA-hBN@PDA adsorbent when compared to both the PVA/PAA and PVA/PAA-hBN adsorbents. The adsorption kinetics adhered to a pseudo-second-order model, indicating chemisorption, whereas the Langmuir model implied a monolayer adsorption. Overall, the findings of this study highlight the efficacy of harnessing the synergistic capabilities of hBN and PDA within the PVA/PAA-hBN@PDA adsorbents, providing an efficient and eco-friendly approach to removing cationic dyes and heavy metals from contaminated water, and thereby contributing to a cleaner and safer environment for all., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:Nahid Azizi, Shaghayegh Goudarzi, Reza Eslami reports financial support was provided by Mitacs Canada. Nahid Azizi, Reza Eslami reports financial support was provided by Sensofine Inc. Hadis Zarrin reports financial support was provided by Natural Sciences and Engineering Research Council of Canada. Nahid Azizi, Shaghayegh Goudarzi, Reza Eslami reports financial support was provided by Toronto Metropolitan University Faculty of Engineering & Architectural Science. Nahid Azizi, Shaghayegh Goudarzi, Reza Eslami reports financial support was provided by Toronto Metropolitan University. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Pellet production represents a critical step for several processes requiring fungal biomass, nevertheless, its optimization is seldom reported. The use of finely ground rice husk as a microcarrier and co-substrate permitted a marked increase (≈ 2.7×) in the productivity of fungal pellet production using Trametes versicolor compared to traditional production methods. The pellets show similar structure and smaller size compared to typical sole-mycelium pellets, as well as comparable laccase activity. The efficiency of the pellets for biodegradation was confirmed by the removal of the crystal violet dye, achieving significantly faster decolorization rates compared to the traditionally produced pellets. The use of these pellets during the continuous treatment of the dye in a stirred tank bioreactor resulted in 97% decolorization operating at a hydraulic residence time of 4.5 d., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

Jatobá-do-cerrado fruit shells, archetypical of lignocellulosic-based biomass, were used as an adsorbent to remove crystal violet (CV) and methylene blue (MB) from water. The adsorbent was characterized using various techniques, and kinetic studies showed dye adsorption followed second-order kinetics. An experimental design investigated the effects of pH and temperature on removal efficiency, with a quadratic model fitting the data best. The results suggest pH influences MB's adsorption capacity more than temperature and at 25 °C and pH 8, MB had a desirability value of 0.89, with 95 % removal efficiency. For CV, temperature had a greater influence, with a desirability value of 0.874 at 25 °C and pH 10, and 95 % removal efficiency. Adsorption isotherm studies revealed maximum adsorption capacities of 123.0 mg·g -1 and 113.0 mg·g -1 for CV and MB, respectively. Experimental thermodynamic parameters indicated an endothermic and spontaneous process which it was supported by quantum chemistry calculations. The protocols developed confirmed the potential for adsorbing CV and MB dyes in water, achieving over 73.1 and 74.4 mg g -1 dyes removal., Competing Interests: Declaration of competing interest Authors declare they have no financial interests., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Gac fruit ( Momordica cochinchinensis Spreng.) is a prominent source of carotenoids, renowned for its exceptional concentration of these compounds. This study focuses on optimizing the extraction of active components from the aril of gac fruit by evaluating the effects of extraction temperature, solid-liquid ratio, and extraction time. The primary objective is to maximize the yield of gac oil while assessing its antioxidant capacity. To analyze the kinetics of the solid-liquid extraction process, both first-order and second-order kinetic models were employed, with the second-order model providing the best fit for the experimental data. In addition, the potential of gac fruit peel as a precursor for biochar production was investigated through carbonization. The resultant biochars were evaluated for their efficacy in adsorbing crystal violet (CV) dye from aqueous solutions. The adsorption efficiency of the biochars was found to be dependent on the carbonization temperature, with the highest efficiency observed for BCMC550 (91.72%), followed by BCM450 (81.35%), BCMC350 (78.35%), and BCMC250 (54.43%). The adsorption isotherm data conformed well to the Langmuir isotherm model, indicating monolayer adsorption behavior. Moreover, the adsorption kinetics were best described by the pseudo-second-order model. These findings underscore the potential of gac fruit and its byproducts for diverse industrial and environmental applications, highlighting the dual benefits of optimizing gac oil extraction and utilizing the peel for effective dye removal.

This study investigates the potential of using Ficus religiosa inflorescence (peepal tree) as an efficient solution for removing crystal violet from simulated and industrial wastewater. Various analyses were conducted to understand the adsorbent's structure, including particle morphology, BET surface area, FTIR, and pH ZPC . The adsorption process was studied under different physicochemical factors such as temperature, concentration, contact time, and pH. Results revealed rapid adsorption, with 94.15% removal efficiency within the first 15 min at neutral pH. The highest observed adsorption capacity was 198.03 mg g -1 , following pseudo-second-order kinetics (R 2  = 0.99), indicating chemisorption. The Langmuir model accurately described the adsorption pathway (R 2  = 0.99), showing monolayer adsorption. Thermodynamic analysis indicated an exothermic, feasible, and spontaneous process with increased entropy. The adsorbent could be easily regenerated using a 1:1 MeOH/H 2 O mixture for up to three cycles, yielding up to 73.86%. Real-time application with industrial effluent containing crystal violet showed up to 44.70% adsorption. The experiments demonstrated reliability with evaluated standard deviations (0.017935-0.000577) and relative standard deviations (0.439-0.673%), confirming statistical reliability. In conclusion, it presents a sustainable and eco-friendly approach for removing crystal violet dye from diverse wastewater sources., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

To effectively remove Diazinon (DZ), Amoxicillin (AMX), and Crystal Violet (CV) from aquatic environments, a novel granular activated carbon (GAC) modified with Polyethylene glycol 600 (PEG) was created and manufactured. The chemical properties were investigated using a variety of characteristic analyses, including FT-IR, XRD, FESEM, and N2 adsorption/desorption. The effectiveness of GAC-PEG's adsorption for the removal of DZ, AMX, and CV was assessed under a variety of conditions, including a pH of 4-9 for the solution, 0.003-0.05 g doses of adsorbent, 50-400 ppm starting concentration, and a reaction time of 5-25 min. For DZ, AMX, and CV adsorption, the maximum adsorption capacity (Qmax) was 1163.933, 1163.100, and 1150.300 mg g-1, respectively. The Langmuir isotherm described all of the data from these adsorption experiments, and the pseudo-second-order well explains all-adsorption kinetics. Most contacts between molecules, electrostatic interactions, π-π interactions, hydrogen bonding, and entrapment in the modified CAG network were used to carry out the DZ, AMX, and CV adsorption on the GAC-PEG. The retrievability of the prepared adsorbent was successfully investigated in studies up to two cycles without loss of adsorption efficiency, and it was shown that it can be efficiently separated., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Choopani et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

In this research, activated carbon was obtained from rubber fruit shells (ACRPs). The obtained activated carbon (ACRPs) was modified by magnetite particle coating and silanization with triethoxyiphenylsilane (TEPS) to produce a new magnetic adsorbent (ACRPs-MS). The affinity of as-prepared adsorbent (ACRPs-MS) toward methylene blue (MB) and crystal violet (CV) dyes was tested in mono-component and bi-component solutions. Structural characterization proves the success of the magnetite coating process and the silanization of ACRPs. In the infrared (IR) spectroscopy spectrum of ACRPs-MS, Si-O-Fe and Si-O-Si bonds were identified, which indicated the presence of magnetite and silane. This is also supported by the elemental composition contained in the energy-dispersive X-ray (EDX) diffractogram. In addition, the presence of the porous structure of the surface of the material and the increase in the specific surface area increase the accessibility of contaminants such as MB and CV dyes to be adsorbed to the ACRPs-MS adsorption site effectively. The experimental results showed that the adsorption of mono-component MB and CV dyes by ACRPs-MS was optimum at pH 8 and an interaction time of 60 min. The adsorption kinetics of mono-component MB and CV dyes by ACRPs-MS tended to follow pseudo-second-order kinetics (PSO) models with PSO rate constant (k 2 ) values of 0.198 and 0.993 g mg -1  min -1 , respectively. The adsorption of MB and CV dyes by ACRPs-MS in a bi-component mixture tends to follow the Langmuir isotherm model with adsorption capacity (q m ) values of 85.060 and 90.504 mg g -1 , respectively. Analysis of adsorption data on the bi-component mixture between MB and CV by ACRPs-MS with the Langmuir isotherm equation for a binary mixture resulted in q m of 22.645 × 10 -3  mmol equiv g -1 . ACRPs-MS material can be used repeatedly five times with adsorption ability > 80%. Desorption of MB and CV dyes was carried out using 0.05 M HCl solution. ACRPs-MS material was able to adsorb MB and CV dyes with a large adsorption capacity and could be used in repeated adsorption. Thus, it can be stated that ACRPs-MS can be used as an effective adsorbent for MB and CV dyes, either singly or in a bi-component mixture., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

In the study, a novel chitosan biopolymer and 1-ethyl-3-methylimidazolium tetrafluoroborate ionic liquid (IL)-incorporated sulfonated poly (ether ether ketone) (SPEEK) composite (Ch-IL@SPEEK) was prepared for adsorption of cationic crystal violet (CV) dye. The proposed composite was well characterized by several techniques. CV adsorption performance was examined via batch studies by varying various variables involving adsorbent dosage, contact time pH and temperature. The isotherm results were demonstrated the adsorption characters of the processes were Langmuirian. The maximum adsorption capacity was determined as 77.66 mg g -1 for the composite which was significantly higher than SPEEK (q max  = 45.36 mg g -1 ). The determined equilibrium time of the operated system was 360 min and the kinetic model was assessed as Elovich. At low pHs the protonated surface groups repelled the positively charged CV and the adsorption rate increased with increasing pH. The process is spontaneous and favorable as it proceeds via endothermic interactions. Furthermore, even at the end of 5 successful adsorption cycles, 77.86 % CV removal was obtained. Remarkable efficiencies were also achieved in the removal performance of different organic pollutants. Based on the reported results, Ch-IL@SPEEK composite were exhibited as an impressive adsorbent material for adsorption processes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Ionizing radiation (mainly including gamma ray and electron beam) technology provides a more efficient and ecological option for dye-containing wastewater treatment, which is supported by its successful achievements in industrial-scale applications. However, the degradation pathway of triphenylmethane dyes by radiation technology is still unclear. In this study, crystal violet (CV) was selected as representative cationic triphenylmethane dye, the decolorization and degradation performance by electron beam radiation technology was systematically evaluated. The results showed that CV can be efficiently decolorized and mineralized by radiation, and its degradation kinetics followed the first-order kinetic model. The effect of inorganic anions and chelating agents commonly existed in dye-containing wastewater on CV decolorization and total organic carbon (TOC) removal was explored. Quenching experiments, density functional theory (DFT) calculation and high performance liquid chromatography mass spectrometry (HPLC-MS) analysis were employed to reveal CV decolorization and degradation mechanism and pathway, which mainly included N-demethylation, triphenylmethane chromophore cleavage, ring-opening of aromatic products and further oxidation to carboxylic acid, and mineralization to CO 2 and H 2 O. Additionally, electron beam radiation/PMS process was explored to decrease the absorbed dose required for decolorization and degradation, and the synergetic effect of radiation with PMS was elucidated. More importantly, the findings of this study would provide the support for treating actual dyeing wastewater by electron beam radiation technology., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

In this work, an agar-graphene oxide hydrogel was prepared to adsorb Cd (II) and Methyl Violet (MV) from water. The hydrogel was synthesised and characterised through SEM and EDS. Kinetic, equilibrium and regeneration studies were carried out, in which Langmuir, Freundlich and Sips isotherm models were fitted to the equilibrium experimental data; and regarding the kinetics, studies were conducted by modelling experimental data considering both empirical and phenomenological models. SEM and EDS have shown the composite present a 3D-disordered porous microstructure and that it is mainly constituted of C and O. Sips model fitted well to Cd (II) (R 2  = 0.968 and χ 2  =  0.176) and MV (R 2  = 0.993 and χ 2  =  0.783). The q max values for MV and Cd (II) were 76.65 and 11.70 mg.g -1 , respectively. Pseudo-order models satisfactorily described Cd (II) and MV adsorption kinetics with R 2  > 0.90. Regeneration experiments revealed an outstanding reuse capacity of the adsorbent after three cycles of adsorption-desorption for both Cd (II) and MV. This study evidences the possibility of a feasible adsorbent for Cd (II) and MV removal from water for successive cycles of use.

Deposition of extracellular Amyloid Beta (Aβ) and intracellular tau fibrils in post-mortem brains remains the only way to conclusively confirm cases of Alzheimer's Disease (AD). Substantial evidence, though, implicates small globular oligomers instead of fibrils as relevant biomarkers of, and critical contributors to, the clinical symptoms of AD. Efforts to verify and utilize amyloid oligomers as AD biomarkers in vivo have been limited by the near-exclusive dependence on conformation-selective antibodies for oligomer detection. While antibodies have yielded critical evidence for the role of both Aβ and tau oligomers in AD, they are not suitable for imaging amyloid oligomers in vivo. Therefore, it would be desirable to identify a set of oligomer-selective small molecules for subsequent development into Positron Emission Tomography (PET) probes. Using a kinetics-based screening assay, we confirm that the triarylmethane dye Crystal Violet (CV) is oligomer-selective for Aβ42 oligomers (AβOs) grown under near-physiological solution conditions in vitro. In postmortem brains of an AD mouse model and human AD patients, we demonstrate that A11 antibody-positive oligomers but not Thioflavin S (ThioS)-positive fibrils colocalize with CV staining, confirming in vitro results. Therefore, our kinetic screen represents a robust approach for identifying new classes of small molecules as candidates for oligomer-selective dyes (OSDs). Such OSDs, in turn, provide promising starting points for the development of PET probes for pre-mortem imaging of oligomer deposits in humans.

Nanomaterials are widely employed in wastewater treatment, among which nanoferrites and their composites hold significant prominence. This study adopts a green approach to synthesize zinc ferrite nanoparticles, subsequently integrating them with polyaniline (PANI) to fabricate the ZnFe 2 O 4 -PANI nanocomposite. Characterization of the prepared ZnFe 2 O 4 -PANI nanocomposite was conducted using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopic (SEM) techniques. Using Scherrer's equation, the crystallite size of the synthesized zinc ferrite nanoparticles was found to be 17.67 nm. SEM micrographs of the ZnFe 2 O 4 -PANI nanocomposite revealed that in situ polymerization of ZnFe 2 O 4 with polyaniline transforms the amorphous surface morphology of the polymer into a homogeneous nanoparticle structure. The adsorption of crystal violet (CV) dye onto the surface of the ZnFe 2 O 4 -PANI nanocomposite depends on pH, adsorbent dosage, temperature, concentration levels and duration. The Langmuir adsorption model fitted the data well, indicating adherence to a pseudo-second-order kinetic pattern. Thermodynamic values ΔG°, ΔH° and ΔS° indicated that the adsorption process occurred spontaneously. Advantages and disadvantages of the technique have also been highlighted. Mechanism of adsorption is discussed. From the obtained results, it is evident that the ZnFe 2 O 4 -PANI nanocomposite holds promise as a sorbent for the removal of dye from wastewater., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

To establish a new method for detecting crystal violet (CV), a harmful dye, herein, a genre of novel biomass carbon dots (CDs) was synthesized via a microwave method and employed as a fluorescent probe, in which water spinach and polyethylene glycol (PEG) performed as raw materials. Based on the inner filter effect (IFE) between the luminescent CDs and CV, the blue emission of this probe at 430 nm could be quenched by CV. Hence, a new strategy was proposed to selectively determine CV in aquaculture ambient. Moreover, under the optimal experiment conditions, this method showed a good linearity between the concentration of CV (c) and fluorescence quenching rate (ΔF/F 0 ) in the concentration range of 4-200 μmol/L with the corresponding correlation coefficient (r) and the detection limit of 0.997 and 710 nmol/L, respectively. With advantages of environmental protectivity, sensitivity, affordability, and user-friendliness, the facilely fabricated CDs could be successfully applied in detecting CV in aquaculture samples, providing a technical foundation for monitoring the pollution of CV and ensuring the quality and safety of aquatic products., (© 2024 John Wiley & Sons Ltd.)

Spray-dried niobium oxide coated with chitosan-activated carbon (NIC) was synthesized and used to remove doxorubicin hydrochloride and crystal violet from aqueous solutions under different parameters such as solution pH (2, 4, 6, and 8), contact time (1 to 9 h), initial concentration (20 to 200 mg L -1 ), and competing ions (0.1 M of CaCl 2 and NaCl). The addition of 5 % chitosan-activated carbon to the matrix of niobium oxide slightly increased the specific surface area from 26 to 30 m 2  g -1 , with the introduction of a carboxylic functional group. This led to an increase in the amount of adsorbed doxorubicin hydrochloride (DOH) from 30 to 44 mg g -1 and that of crystal violet (CV) from 15 to 32 mg g -1 from the initial respective 100 mg L -1 at pH 8. The data from the concentration study fitted into Liu isotherm having adsorption capacity of 128 and 57 mg g -1 for DOH and CV respectively, while pseudo first and second order are more suitable for adsorption kinetics. The additional functional groups on the IR spectrum of NIC after the adsorption of DOH and CV confirmed the interaction between NIC and the adsorbates' molecules. The mechanism of adsorption was supported by DFT calculations., Competing Interests: Declaration of competing interest The authors declare that no conflict of interest exists in the submission of this manuscript, and the manuscript is approved by all authors for publication., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Textile effluents containing toxic dyes must be treated effectively before discharge to prevent adverse environmental impacts. Traditional physical and chemical treatment methods are costly and generate secondary pollutants. In contrast, biological treatment is a more suitable, clean, versatile, eco-friendly, and cost-effective technique for treating textile effluent. It is well established that indigenous microbial populations present in effluents can effectively degrade toxic dyes. In this regard, Achromobacter xylosoxidans DDB6 was isolated from the effluent sample to decolorize crystal violet (CV), Coomassie brilliant blue (CBB), and alizarin red (AR) by 67.20%, 28.58%, and 20.41%, respectively. The growth parameters of A. xylosoxidans DDB6 in media supplemented with 100 ppm of various dyes were determined using the modified Gompertz growth model. The immobilized cells in calcium alginate beads showed apparent decolorization rate constant of 0.27, 0.18, and 0.13 h -1 for CV, CBB, and AR, respectively. The immobilized cells in a packed bed reactor with an optimum flow rate of 0.5 mL/min were used to treat 100 ppm of CV with a percentage decolorization of 79.47% after three cycles. Based on the findings, A. xylosoxidans DDB6 could be effectively used for decolorization of various dyes.

The indirect emission had a negative influence on the ecosystem of enormous amounts of harmful dyes into water. Fe 3 O 4 @Ag-MOF was successfully fabricated to capture Gentine violet (GV)) as a model example of cationic dye from their aqueous solutions was evaluated in this search as a method to eliminate dyes from water contaminants. FTIR, XPS, BET, TGA, SEM, TEM, and XRD have all been used to study this adsorbent in order to determine its structural and chemical characteristics as well as to interpret its binding mechanisms. According to the results of the characterization, the synthesized composite had a size about 45 nm, a surface area of 856.06 m 2 /g, and considerable magnetic characteristics (66.2 emug -1 ). Consequently, we created mesoporous surfaces that had a strong ability to interface and absorb GV dye. It is possible to use the pseudo-second order rate equation to characterize the kinetic profile., while the Langmuir equation fits isotherm models. At pH 9, maximum sorption capacities can reach 1.68 mmol.g -1 . Additionally, the investigations of temperature profiles indicated the endothermic process and Thermodynamic parameters were discovered as, ΔG°, ΔH° and ΔS° The synthesized adsorbent had an interestingly high reusability of > 92 percent up to the sixth cycle. These findings revealed that a mixture of electrostatic interactions, π-π stacking, hydrogen bonds, and pore filling were involved in the GV adsorption mechanism. Fe 3 O 4 @Ag-MOF was successful in demonstrating its effectiveness as a point-of-use colour collection candidate from actual dyeing effluents.

In the presented study, a novel polypyrrole-decorated bentonite magnetic nanocomposite (MBnPPy) was synthesized for efficient removal of both anionic methyl orange (MO) and cationic crystal violet (CV) dyes from contaminated water. The synthesis of this novel adsorbent involved a two-step process: the magnetization of bentonite followed by its modification through in-situ chemical polymerization. The adsorbent was characterized by SEM/EDX, TEM/SAED, BET, TGA/DTA-DTG, FTIR, VSM, and XRD studies. The investigation of the adsorption properties of MBnPPy was focused on optimizing various parameters, such as dye concentration, medium pH, dosage, contact time, and temperature. The optimal conditions were established as follows: dye concentration of C o (CV/MO) at 100 mg/L, MBnPPy dosage at 2.0 g/L, equilibrium time set at 105 min for MO and 120 min for CV, medium pH adjusted to 5.0 for MO dye and 8.0 for CV dye, and a constant temperature of 303.15 K. The different kinetic and isotherm models were applied to fit the experimental results, and it was observed that the Pseudo-2 nd -order kinetics and Langmuir adsorption isotherm were the best-fitted models. The maximal monolayer adsorption capacities of the adsorbent were found to be 78.74 mg/g and 98.04 mg/g (at 303.15 K) for CV and MO, respectively. The adsorption process for both dyes was exothermic and spontaneous. Furthermore, a reasonably good regeneration ability of MBnPPy (>83.45%/82.65% for CV/MO) was noted for up to 5 adsorption-desorption cycles with little degradation. The advantages of facile synthesis, cost-effectiveness, non-toxicity, strong adsorption capabilities for both anionic and cationic dyes, and easy separability with an external magnetic field make MBnPPy novel., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Taking the thiazide cationic dye methylene blue (MB), triphenylmethane cationic dye crystal violet (CV), monoazo cationic dye cationic red 46 (R-46), and polycarboxycyanine cationic dye cationic rosé FG (P-FG) as the research objects, the adsorption behaviors of a self-made corn straw modified adsorbent HQ-DTPA-I for the dyes were investigated in depth. Under optimized conditions, HQ-DTPA-I can quickly adsorb most dyes within 3 min and reach equilibrium adsorption in 15-20 min. The removal rates of HQ-DTPA-I to MB, CV, R-46 and AP-FG can reach 95.28 %, 99.78 %, 99.28 % and 98.53 %, respectively. It also has good anti-interference ability for common ions present in most actual dye wastewater. For six consecutive adsorption-desorption cycles, the adsorption performance of HQ-DTPA-I can still reach 80.17 %, 81.61 %, 90.77 % and 83.48 % of the initial adsorption capacity, indicating good recovery performance. Based on Gaussian density functional theory to calculate its surface potential energy, it is found that the adsorption mechanism of HQ-DTPA-I for the cationic dyes is mainly due to the electrostatic interaction between the carboxyl groups in ligand DTPA and amino groups in dye molecules., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The growing need to examine the adsorption capabilities of innovative materials in real-world water samples has encouraged a shift from single to multicomponent adsorption systems. In this study, a novel composite, PANI-g-SM was synthesized by covalently grafting a lignocellulosic biomass, Saccharum munja (SM) with polyaniline (PANI). The as-synthesized composite was investigated for the simultaneous adsorption of cationic (Methylene Blue (MB); Crystal Violet (CV)) and anionic dyes (Reactive Red 35 (RR); Fast Green FCF (FG)) from four single components and two binary systems, MB + RR and CV + FG. Further, the effect and interaction of pH (2-11), dosage (0.01-0.04 g/10 mL), and initial concentration (0.0313 to 0.1563 mmol/L) on the elimination of dyes by PANI-g-SM were studied through a novel design of Box-Behnken of Response Surface Methodology (RSM) technique which was found to be highly useful for revealing the chemistry of interfaces in multi-component systems. The extended Langmuir model for the binary system indicated the presence of synergism, as result the maximum monolayer adsorption capacity increased by 44.44%, 645.83%, 67.88%, and 441.07% for MB, RR, CV, and FG dye, respectively. Further, the adsorption process mainly followed a pseudo-second-order kinetic model, and the thermodynamic studies revealed the exothermic nature of adsorption for RR and FG dye while endothermic for MB and CV dye, respectively with Δ G varying from - 1.68 to - 6.12 kJ/mol indicating the spontaneity of the process. Importantly, the efficacy of the composite was evaluated for the treatment of textile industry effluent highlighting its potential as an adsorbent for wastewater treatment., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

In present study, eco-friendly sulfated cellulose-magnetic biocomposite was successfully synthesized with a simple method from hemp biomass. ATR-FTIR was used to determine chemical changes, while FE-SEM-EDS, STEM, XRD, TG/DTA, and BET techniques were employed to identify changes in morphology, elemental composition, crystal structure, and thermal degradation. Moreover, the saturation magnetization and pHpzc values of the MSHB were also determined. The effectiveness of magnetic sulfated hemp biomass (MSHB) was tested in the removal of cationic dyes from wastewater, including methylene blue (MB), crystal violet (CV), and malachite green oxalate (MGO). The adsorption all three dyes to MSHB, the pseudo-second-order kinetic model and the Langmuir model were determined to be more appropriate, and was endothermic and spontaneous from thermodynamic parameters, too. The maximum MSHB adsorption capacities were found to be 457.6, 509.3, and 1300 mg/g for MB, CV, and MGO at 298 K. With increasing temperature, it also drastically increased in capacity. The outstanding property of the MSHB is that it shows high removal performance wide pH range, even after ten cycles its high removal efficiency is still over 96 % for all three dyes and almost unaffected from dense matrix medium. These results demonstrate that MSHB is remarkable adsorbent for removing cationic dyes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Aim: Assessing the visual accuracy of two large language models (LLMs) in microbial classification. Materials & methods: GPT-4o and Gemini 1.5 Pro were evaluated in distinguishing Gram-positive from Gram-negative bacteria and classifying them as cocci or bacilli using 80 Gram stain images from a labeled database. Results: GPT-4o achieved 100% accuracy in identifying simultaneously Gram stain and shape for Clostridium perfringens , Pseudomonas aeruginosa and Staphylococcus aureus . Gemini 1.5 Pro showed more variability for similar bacteria (45, 100 and 95%, respectively). Both LLMs failed to identify both Gram stain and bacterial shape for Neisseria gonorrhoeae . Cumulative accuracy plots indicated that GPT-4o consistently performed equally or better in every identification, except for Neisseria gonorrhoeae's shape. Conclusion: These results suggest that these LLMs in their unprimed state are not ready to be implemented in clinical practice and highlight the need for more research with larger datasets to improve LLMs' effectiveness in clinical microbiology.

A major worldwide challenge that presents significant economic, environmental, and social concerns is the rising generation of food waste. The current work used chicken bones (CB) and rice (R) food waste as alternate precursors for the production of activated carbon (CBRAC) by microwave radiation-assisted ZnCl 2 activation. The adsorption characteristics of CBRAC were investigated in depth by removing an organic dye (crystal violet, CV) from an aquatic environment. To establish ideal conditions from the significant adsorption factors (A: CBRAC dosage (0.02-0.12 g/100 mL); B: pH (4-10); and C: duration (30-420), a numerical desirability function of Box-Behnken design (BBD) was utilized. The highest CV decolorization by CBRAC was reported to be 90.06% when the following conditions were met: dose = 0.118 g/100 mL, pH = 9.0, and time = 408 min. Adsorption kinetics revealed that the pseudo-first order (PFO) model best matches the data, whereas the Langmuir model was characterized by equilibrium adsorption, where the adsorption capacity of CBRAC for CV dye was calculated to be 57.9 mg/g. CV adsorption is accomplished by several processes, including electrostatic forces, pore diffusion, π-π stacking, and H-bonding. This study demonstrates the use of CB and R as biomass precursors for the efficient creation of CBRAC and their use in wastewater treatment, resulting in a greener environment.

This work aims to apply the use of food-grade algae (FGA) composited with chitosan-benzaldehyde Schiff base biopolymer (CHA-BD) as a new adsorbent (CHA-BA/FGA) for methyl violet 2B (MV 2B) dye removal from aqueous solutions. The effect of three processing variables, including CHA-BA/FGA dosage (0.02-0.1 g/100 mL), pH solution (4-10), and contact duration (10-120 min) on the removal of MV 2B was investigated using the Box-Behnken design (BBD) model. Kinetic and equilibrium dye adsorption profiles reveal that the uptake of MV 2B dye by CHA-BA/FGA is described by the pseudo-second kinetics and the Langmuir models. The thermodynamics of the adsorption process (ΔG°, ΔH°, and ΔS°) reveal spontaneous and favorable adsorption parameters of MV 2B dye onto the CHA-BA/FGA biocomposite at ambient conditions. The CHA-BA/FGA exhibited the maximum ability to absorb MV 2B of 126.51 mg/g (operating conditions: CHA-BA/FGA dose = 0.09 g/100 mL, solution pH = 8.68, and temperature = 25 °C). Various interactions, including H-bonding, electrostatic forces, π-π stacking, and n-π stacking provide an account of the hypothesized mechanism of MV 2B adsorption onto the surface of CHA-BA/FGA. This research reveals that CHA-BA/FGA with its unique biocomposite structure and favorable adsorption properties can be used to remove harmful cationic dyes from wastewater.

Water pollution caused by dyes is a pressing environmental challenge due to their persistence and difficulty in degradation. Herein, an anionic adsorbent (HS-PAANa) was synthesized by grafting polyacrylic acid (PAA) onto the agricultural waste-hemp stem (HS). The obtained HS-PAANa adsorbent exhibited rapid adsorption kinetics, high adsorption capacity, and a favorable preference for cationic dyes, such as methylene blue (MB) and crystal violet (CV). The experimental data fit well with the pseudo-second-order kinetic model and Langmuir isotherm, demonstrating the efficiency of HS-PAANa in dye removal. Notably, the optimal adsorption capacities of HS-PAANa for MB and CV were found to be 1296.65 mg/g and 1451.43 mg/g, respectively. In the cationic/anionic dyes (MB/MO) binary systems, HS-PAANa exhibited enhanced selective adsorption of cationic dyes (MB), indicating its potential for targeted removal of specific dyes from mixed solutions. Moreover, HS-PAANa adsorption shows an excellent recyclability, after five cycles, HS-PAANa still maintained MB and CV removal rates of 93.85% and 95.08%, respectively. Therefore, the bioadsorbent HS-PAANa exhibits high potential as a highly efficient adsorbent for the effective treatment of cationic pollutants in wastewater., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

In this study, bamboo waste (BW) was subjected to pyrolysis-assisted ZnCl 2 activation to produce mesoporous activated carbon (BW-AC), which was then evaluated for its ability to remove cationic dyes, specifically methylene blue (MB) and crystal violet (CV), from aqueous environments. The properties of BW-AC were characterized using various techniques, including potentiometric-based point of zero charge (pH pzc ), scanning electron microscopy with energy dispersive X-rays (SEM-EDX), X-ray diffraction (XRD), gas adsorption with Brunauer-Emmett-Teller (BET) analysis, infrared (IR) spectroscopy. To optimize the adsorption characteristics (BW-AC dosage, pH, and contact time) of PBW, a Box-Behnken design (BBD) was employed. The BW-AC dose of 0.05 g, solution pH of 10, and time of 8 min are identified as optimal operational conditions for achieving maximum CV (89.8%) and MB (96.3%) adsorption according to the BBD model. The dye removal kinetics for CV and MB are described by the pseudo-second-order model. The dye adsorption isotherms revealed that adsorption of CV and MB onto BW-AC follow the Freundlich model. The maximum dye adsorption capacities ( q max ) of BW-AC for CV (530 mg/g) and MB (520 mg/g) are favorable, along with the thermodynamics of the adsorption process, which is characterized as endothermic and spontaneous. The adsorption mechanism of CV and MB dyes by BW-AC was attributed to multiple contributions: hydrogen bonding, electrostatic forces, π-π attraction, and pore filling. The findings of this study highlight the potential of BW-AC as an effective adsorbent in wastewater treatment applications, contributing to the overall goal of mitigating the environmental impact of cationic dyes and ensuring the quality of water resources.

Recently, several researchers have been trying to reduce the ecological effects of water pollution by considering the use of biodegradable materials that prevent the generation of secondary pollution in our environment and enable water reuse. Here, new biodegradable hydrogels based on alginate (Alg), gelatin (Gel) and polypyrrole (PPy) were successfully implemented to remove two known highly toxic cationic dyes from wastewater. The design process was performed in two steps: in-situ polymerization of polypyrrole within the Alg/Gel mixture, followed by hydrogel formation. Biocomposites showed promising efficacy for the removal of both basic red 46 (BR46) and crystal violet (CV) dyes from real and demineralized water samples. However, Alg-Gel-PPy hydrogel showed better selectivity for BR46 than for CV as compared to the pristine Alg-Gel hydrogel. Adsorption of both pollutants on biocomposite hydrogel beads followed the Langmuir isotherm and pseudo-second order kinetic models. Besides, the highest adsorption capacities (125 mg g -1 for BR46 and 88.5 mg g -1 for CV) were obtained for the Alg-Gel-PPy hydrogel, compared with those determined for PPy-free hydrogel (103.09 mg g -1 for BR46 and 86.96 mg g -1 for CV) and remained at a satisfactory level for five adsorption-desorption cycles. Finally, the obtained hydrogels showed excellent biodegradability by natural soil microorganisms, with 91 % decomposition., Competing Interests: Declaration of competing interest The authors report no declarations of interest., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Graphitic carbon nitride-adorned polydimethylsiloxane (PDMS) floating catalyst was prepared by a simple procedure. The prepared catalyst was utilized for the simultaneous mitigation of recalcitrant organic pollutants such as Rhodamine B, Crystal Violet and Malachite Green from their ternary mixture for the first time. Derivative spectroscopic method was used to calculate the degradation efficiencies of individual dyes in the mixture. The prepared catalyst showed a consistent degradation performance up to 4 cycles inducing a degradation of 94.02%, 92.1% and 97.13% of Rhodamine B, Crystal Violet and Malachite Green, respectively, in a dye(s) solution with a catalytic loading of 0.5 g L -1 . A kinetic analysis of the dye(s) degradation under visible light was carried out during the course of this work up to 120 min. A detailed characterization of the surface of this novel catalyst was carried out in this study by SEM, EDX, XRD, DRS, DTG, FTIR, Raman spectroscopy and UV-Vis spectroscopy and provided the experimental proof for the catalyst presenting high hydrophobicity, self-cleaning ability, good recyclability and high chemical stability., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Biodegradable and very low-cost adsorbent beads were prepared from date pits powder (DP) and sodium alginate (SA). DP to SA ratios was varied (1/2, 1/4 and 1/6) and used to eliminate Crystal violet (CV) a cationic dye. Adsorbents were characterized by FTIR, SEM-EDS, UV-vis DR, TGA and the point of zero charge (pH PZC ). The optimal composite beads SA@6DP show high adsorption capacities of 83.565 mg/g toward CV than SA@2DP and SA@4DP. The kinetics investigation showed that the adsorption is well described by the pseudo-second-order kinetic (R 2  = 0.998). The thermodynamics and isotherms studies exhibit that the adsorption phenomenon for SA@6DP adsorbent is endothermic and significantly fitted with the Redlich-Peterson model. The experimental adsorption tests were optimized by the Box-Behnken design (BBD) which led to conclude the maximal CV removal efficiency achieved by SA@6DP was 99.873 % using [CV] = 50 mg/L, adsorbent mass = 20 mg and 48 h of contact time. The theoretical calculation proved that the CV molecules favor the mode of attack due to their electrophilic character and can accept the SA@6DP adsorbent electrons more easily to form an anti-bonding orbital. SA@6DP hydrogel beads are therefore an exceptional bio-adsorbent that offers excellent adsorption performance., Competing Interests: Declaration of competing interest The authors have declared no conflict of interest., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Access to clean water is the mandatory requirement for every living being to sustain life. So, membrane-based integrated approach of adsorption and separation technology has recently been preferred by scientists over other conventional techniques, for wastewater treatment. Current research focused on the synthesis of novel imidazolium (A1) based IL, which was further functionalized with hydroxyapatite (HAp; extracted from Labeo rohita scales), to create possible solutions towards environmental remediation. Cellulose acetate (CA) was used for the fabrication of three different ionic liquid membranes. All the synthesized products were characterized by FTIR, XRD and TGA. Two dyes of different nature, i.e., congo red (anionic) and crystal violet (cationic) were selected because of their highly toxic and carcinogenic effects, for batch adsorption experiments. Antibacterial activity of the synthesized membranes was also evaluated against S. aureus. Results of the study revealed that CA-HA1 1:2 acted as the best adsorbent towards the removal of crystal violet, exhibiting removal efficiency of 98% with the contact time of 24 h while in case of congo red adsorption, CA-HA1 (1:2) proved as prime adsorbent with the removal efficiency of 96% for the same preceding contact time. Considering the antibacterial character of the synthesized membranes, CA-A1 (1:1) emerged as very efficient antibacterial agent with the inhibition zone of 50 mm after 48 h. The overall behavior of monolayer and multilayer adsorption was witnessed for both dyes while kinetic studies favored the pseudo-second order reaction for all adsorbents., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

The present study is devoted to the removal of crystal violet dye using the synthesized barium alginate/carbon composites abbreviated as BA (barium alginate), BAAC (barium alginate/activated carbon), BASC (barium alginate/starch carbon), and BASSC (barium alginate/starch carbon modified with CTAB). The adsorptive removal of crystal violet as a function of contact time, pH of solution, composite dose, initial dye concentration, and temperature was studied. The uptake of crystal violet (CV) dye for the composites was recorded in the range of 36 mg g -1 to 50 mg g -1 at pH 8.03 ± 0.03 for an equilibrium time of 120 min. The adsorption kinetics and isotherms in compliance with the CV sorption onto BA/carbon composites corroborated the utmost fit of pseudo-second-order and Freundlich isotherm models, respectively. The recycling process was achieved using the barium alginate-treated bead carbons for different initial CV dye concentrations of 10-30 mg L -1 with a scope of zero disposal. The practicability of BA/carbon composites in a groundwater sample spiked with 30 mg L -1 of CV was successfully achieved with a removal efficiency of about 65-74%. Characterization studies for the composites using FTIR, SEM (with EDS), XRD, TGA, and BET were carried out and discussed in the paper., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

In this study, firstly, the syntheses and characterizations of biobased polyesters with different acid values obtained from the condensation reaction of biobased itaconic acid and polyethylene glycol were investigated. Then, UV curing was applied to form polymeric networks as adsorbent material from these polyesters containing different acids. Fourier transform infrared spectrometry (FTIR), Nuclear Magnetic Resonance Spectroscopy (NMR), X-ray Photoelectron Spectroscopy (XPS), Gel Permeation Chromatography (GPC) and scanning electron microscope (SEM) were used for the characterization of polymeric networks. The effects of the parameters of contact time, initial dye concentration, pH, temperature, amount of adsorbent on adsorption were investigated by batch method. In addition, adsorption equilibrium data were analyzed by Langmuir, Freundlich, Tempkin, Elovich, Redlich-Peterson, Harkin-Jura and Jossens adsorption models. Kinetic and thermodynamic studies were performed at 298, 308, 318 and 328 K and desorption studies were also examined. Comparison studies for the effects of the acid values of the adsorbent materials on the removal of methyl violet (MV) organic pollutant from aqueous solutions were analyzed. According to the pseudo-second-order model, the adsorption capacities were found to be ≥ 357.14 mg/g for the adsorbents. From the thermodynamic data, it was determined that the mechanism was exothermic and spontaneous. As a result of the third reuse, it was found that the adsorbents had a removal efficiency of ≥ 72.36%. According to the results observed the increase in the acidities in the chemical structure of bio-based polymeric networks enhances the adsoption properties., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Background: Malachite green (MG) and brilliant green (BG) are two synthetic triphenylmethane dyes with applications in the textile and aquaculture industries. They are considered to be environmental contaminants due to their carcinogenic and mutagenic properties. Both dyes have the same bluish-green color in aqueous solutions., Objective: The aim of this study is to develop a colorimetric analysis as a very simple and cost-effective method to determine the residues of MG and BG simultaneously in aqueous industrial samples., Method: This method is based on the alterations in red, blue, green (RGB) color histograms of the dyes in the presence and absence of Triton X-100 micelle. The images of the samples were taken by a digital camera and converted to the RGB color system using MATLAB software. Partial least-squares regression as a powerful chemometrics tool was used for multivariate calibrations and quantitative measurements. The performance of the proposed method was compared with a simple spectrophotometric method as a reference., Results: Relative errors of prediction for colorimetric and spectrophotometric analysis, respectively, in micellar media were 6.56 and 4.61% for MG and 6.38 and 5.24% for BG. The shortest linear ranges for colorimetric and spectrophotometric analysis, respectively, in micellar media were 0.1-10 and 0.5-5 mg/L for MG and 0.1-15 and 0.5-6 mg/L for BG. The recovery percentages obtained from the analysis of the dyes in real samples of fish-pond water and textile wastewater ranged between 91 and 107%., Conclusions: The good correlation between the results of the colorimetric analysis and the spectrophotometric analysis indicates the reliability of the proposed colorimetric method. Also, the results of the relative recovery study showed insignificant matrix effect., Highlights: This study demonstrates the ability of the colorimetric analysis coupled with chemometrics tools for simultaneous determination of the analytes even with nearly identical colors., (© The Author(s) 2023. Published by Oxford University Press on behalf of AOAC INTERNATIONAL. All rights reserved. For permissions, please email: journals.permissions@oup.com.)

The increased prevalence of multi-drug resistant M. tuberculosis is quite possibly the direst and most difficult task for the early diagnosis and treatment. A rapid, reliable, and inexpensive diagnostic method is the need of the hour. The current study on crystal violet decolorization assay explores the possibility to develop a rapid and simple detection method to detect multi-drug-resistant tuberculosis isolates by comparing the results with the traditional liquid culture drug susceptibility testing method based on their sensitivity, specificity, positive predictive value, and negative predictive value. 70 isolates were used for the study and were detected as multi-drug resistant, mono drug-resistant, and sensitive by using crystal violet decolourization assay and further compared with the results of DST and using H37Rv as the standard control strain. The sensitivity, specificity, positive predictive value, and negative predictive value of crystal violet decolorization assay (Rifampicin: 100%, 94.60%, 100% and 82.40%; isoniazid: 100%, 94.10%, 100%, 86.40%) are calculated and the percentage were compared with the conventional liquid culture drug susceptibility testing for M. tuberculosis using rifampicin and isoniazid. Crystal violet decolourization assay is rapid, reproducible, and doesn't require any highly experienced personal or sophisticated laboratory instruments for interpretation. This assay is found to be nearly as reliable as conventional liquid culture drug susceptibility testing and may thus be of great help in phenotypic confirmation of multi-drug resistant tuberculosis by providing results more rapidly., (Copyright © 2023 Institut Pasteur. Published by Elsevier Masson SAS. All rights reserved.)

The current study reports a facile method to fabricate functionalized multi-walled carbon nanotubes and montmorillonite clay mineral-based nanocomposite matrix and its detailed characterization using spectroscopic and morphological techniques. The nanocomposites have been studied for their potential applications in the treatment of contaminated water using batch adsorption studies. The investigations conducted using optical absorption spectroscopic measurements for the adsorption process indicate that the nanocomposite matrix can effectively remove almost 98% of the dye from aqueous solution. The nanocomposites have showed fast and strong adsorption behaviour for the dye with the maximum adsorption capacity (q m ) of ~467.3 mg g -1 in 25 min. The experimental data at equilibrium were also correlated with the theoretical adsorption isotherm and kinetic models. The results demonstrate that the experimental data fits well to the Freundlich adsorption isotherm model and conforms to second-order kinetics. Furthermore, the nanocomposite exhibits good recyclability without any marked decrease in the adsorption performance even after five adsorption cycles of usage which indicates its potential application as reusable adsorbent for the efficient removal of hazardous dyes from contaminated water., (© 2022 John Wiley & Sons Ltd.)

In this study, an environmentally sustainable process of crystal violet, congo red, methylene blue, brilliant green, Pb 2+ , Cd 2+ , and Zn 2+ ions adsorption from aqueous solutions onto amino-modified starch derivatives was investigated. The degree of substitution, elemental analysis, swelling capacity, solubility, and FTIR, XRD, and SEM techniques were used to characterize the adsorbents. The influence of pH, contact time, temperature, and initial concentration has been studied to optimize the adsorption conditions. The amino-modified starch was the most effective in removing crystal violet (CV) (65.31-80.46 %) and Pb 2+ (67.44-80.33 %) within the optimal adsorption conditions (pH 5, 10 mg dm -3 , 25 °C, 180 min). The adsorption of CV could be described by both Langmuir and Freundlich adsorption isotherms, while the adsorption of Pb 2+ ions was better described by the Langmuir isotherm. The pseudo-second order model can be used to describe the adsorption kinetics of CV and Pb 2+ on all tested samples. The thermodynamic study indicated that the adsorption of CV was exothermic, while the Pb 2+ adsorption was endothermic. The simultaneous removal of CV and Pb 2+ from the binary mixture has shown their competitive behavior. Thus, the amino-modified starch is a promising eco-friendly adsorbent for the removal of dyes and heavy metals from polluted water., Competing Interests: Declaration of competing interest There are NO known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Water is the most important resource for life, but it has been greatly exhausted over the past century as a result of the human population and environmentally harmful activities. The excessive quantity of dyes exists in the wastewater produced from the textile industries which is the main reason for serious human health and environmental problems. There are many dye removal techniques, and the most promising one is the adsorption technique. The novelty of this research is using unmodified synthesized hydroxyapatite (HAp) as an adsorbent for the removal of gentian violet (GV) dye from aqueous solutions as there are no sufficient data in the literature about using it in the adsorption of GV dye from aqueous solutions. Unmodified HAp was synthesized by a combined precipitation microwave method. The prepared adsorbent was characterized by scanning electron microscopy (SEM), energy dispersive X-ray (EDX), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and zeta potential analyses. The kinetic study showed that the pseudo-second-order (PSO) model was the best fitted model with the experimental data. Analysis of adsorption isotherms using different models showed that this adsorption system was better described by the Halsey isotherm with a maximum adsorption capacity ( q max )  of 1.035 mg/g. The effects of experimental factors such as initial solution pH, initial dye concentration, adsorbent dose, and contact time were studied during the investigation of GV dye removal efficiency. The experimental results indicated that the maximum adsorption efficiency (99.32%) of the GV dye using HAp adsorbent was achieved at the following conditions: contact time = 90 min, pH = 12, initial GV dye concentration = 3 mg/L, and adsorbent dose = 1 g/L. The adsorption mechanism of the GV dye using HAp might be explained by the electrostatic interaction between the negatively charged surface of the HAp and the positively charged group of the GV dye. Thermodynamics study was performed on the adsorption process of GV dye from aqueous solutions using the synthesized HAp which revealed that this process was endothermic and spontaneous due to positive values of Δ H and Δ S and negative values of Δ G ., Competing Interests: The authors declare that they have no conflicts of interest., (Copyright © 2023 Dalia A. Ali et al.)

In this study, activated carbon produced from oak cupules (ACOC) was prepared using chemical activation with H 3 PO 4 . ACOC is subsequently used as an adsorbent to facilitate the removal of an acidic dye, naphthol blue black (NBB), and basic dye crystal violet (CV) from aqueous solutions. The ACOC was characterized by FTIR spectroscopy, XRD, and SEM. The adsorption isotherm data fits well with the Langmuir model for NBB and CV. The kinetic models of adsorption of NBB and CV by ACOC were pseudo-first order and pseudo-second order, respectively. Thermodynamic parameters were evaluated and indicated that the adsorption of both dyes onto ACOC was endothermic and spontaneous. The adsorption capacity of ACOC reached 208 mg g -1 for NBB and 658 mg g -1 for CV. ACOC was shown to be a promising adsorbent for the removal of NBB and CV from aqueous solutions.

In the present study, biomass from the Chromolaena odorata plant's stem was activated using sulfuric acid to adsorb crystal violet (CV) dye. The adsorption operation of CV dye was studied considering the effect of variables like pH, initial dye concentration, time, adsorbent dosage, and temperature. The pseudo-second-order equation best fitted the kinetic study. The thermodynamic parameters such as activation energy (9.56 kJ/mol), change in Gibbs energy (81.43 to 96.7 kJ/mol), enthalpy change (6.89 kJ/mol), and entropy change (-254.4 J/mol K) were calculated. Response surface methodology estimated that at pH (4.902), adsorbent dosage (8.33 g/L), dye concentration (82.30 ppm), and temperature (300.13 K) dye removal of 97.53% is possible. FTIR, SEM, XRD, BJH, and BET confirmed adsorption operation. The adsorbent can be reused for 3 cycles effectively. Langmuir isotherm which best fitted the adsorption operation was used for designing a theoretical single-stage batch adsorber for large-scale operation., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

In this study, cottonwood seeds (CWS) were introduced as a novel, green, and low-cost biosorbents for the removal of crystal violet (CV) dye from aqueous solutions. To illustrate the characteristics of CWS, surface morphology, Fourier-transform infrared spectroscopy, field emission scanning electron microscopes, and energy dispersive X-ray spectroscopy techniques were employed. Important adsorption variables ( i.e. , equilibrium time, solution pH, CWS amount, CV concentration, and temperature) were systematically studied. Maximum CV dye adsorption was observed at pH 10 using 20 mg of the adsorbent. Different adsorption isotherms were investigated, and the results were more accurately consistent with the Langmuir model ( R 2 = 0.992). The maximum capacity of adsorption was 153.85 mg g -1 at 60 min. The kinetic data were examined by different models and a pseudo-second-order model supplied the best correlation between experimental data. Investigated thermodynamic parameters at different temperatures illustrated that the CV adsorption procedure was spontaneous and endothermic with an increase in entropy. The percentage removal and the relative standard deviations for the real sample analysis were in the range of 89-98% and 4.9-9.5%, respectively. High adsorption capacity and low equilibrium time demonstrated that CWS is an impressive biosorbent for dye pollutants uptakes from aqueous solutions and real industrial wastewater samples.

Fallen bamboo leaves ( Bambusa bambos ), hereinafter BL have been designed to be transformed into an efficient and sustainable adsorbent for the removal of crystal violet (CV) dye from wastewater with up to 95% scavenging ability. BL have been characterized by Fourier transform infrared (FTIR) spectra, field emission scanning electron microscopy (FESEM), and zero point charge (pHzpc). The maximum adsorption capacity is 30 mg/g at pH 10. Physico-chemical parameters have been investigated concerning pH, contact time, initial concentration, and coexistent ions. Pseudo-second-order kinetics is followed best ( R 2 =0.999) signifying a chemisorption pathway. Besides, intra-particle diffusion plays a governing role in the film diffusion of crystal violet into the core of the adsorbent. Langmuir isotherm model fits best ( R 2 =0.972) suggesting a uniform, monolayer, and homogeneous adsorption. Regeneration was successful with methanol (65%) and reusability was tested for three cycles and was found to retain activity up to 80%. Analysis of CV containing industrial effluent suggests that a 36.8% reduction is possible with BL. The effect of co-existent ions suggests little influence on the adsorption. Compared to other contemporary and relevant adsorbents, it can be concluded that BL can be exercised for the sustainable decontamination of CV-containing wastewater.

In this study, the biomass of rubber seed pericarp was first treated with sulfuric acid and then its activated carbon was formed by the pyrolysis process. As produced acid-treated activated carbon of chosen biomass was then used for the adsorption of crystal violet (CV) and methylene green (MG) from the colored aqueous solution. The adsorbent was exposed to several characterization methods to know its structural and morphological behaviors before and after CV and MG adsorption. The adsorbent was found to be mesoporous having a surface area of 59.517 m 2 /g. The effect of pH, time, and concentration was assessed while various isotherm and kinetics models were employed to know the adsorption insight. The optimum conditions were at pH 8, within 30 min, 50 mg/L concentration, and 0.06 gm dose. The adsorption data (the maximum adsorption capacity for CV and MG were found to be 302.7 and 567.6 mg/g, respectively) was validated by fitting in a response surface statistical methodology and the positive interactions between the studied factors were found. The adsorption was mainly belonging to the electrostatic attraction of the dye molecules. The study proves that the used adsorbent is economical and an excellent source of treating wastewater.