Search

As investigations in the biomedical applications of plasma advance, a demand for describing safe and efficacious delivery of plasma is emerging. It is quite clear that not all plasmas are "equal" for all applications. This Perspective discusses limitations of the existing parameters used to define plasma in context of the need for the "right plasma" at the "right dose" for each "disease system." The validity of results extrapolated from in vitro studies to preclinical and clinical applications is discussed. We make a case for studying the whole system as a single unit, in situ. Furthermore, we argue that while plasma-generated chemical species are the proposed key effectors in biological systems, the contribution of physical effectors (electric fields, surface charging, dielectric properties of target, changes in gap electric fields, etc.) must not be ignored. [ABSTRACT FROM AUTHOR]

A nonthermal, pulsed spark discharge is applied to three polymer powders in Ar and Ar–H2 ${{\rm{H}}}_{2}$ gas mixtures. Hydrogen is introduced to assess plasma‐driven decomposition. Gaseous decomposition products, including methane, acetylene, and ethylene, are observed with Fourier‐transform infrared (FTIR). Surface modifications are observed on the residual polymer via attenuated total internal reflection‐FTIR. Time‐averaged rotational, vibrational, and excitation temperatures are characterized in the discharge. The plasma density is found to be around 3×1022 m−3 $3\times 1{0}^{22}\unicode{x0200A}{{\rm{m}}}^{-3}$, with rotational and vibrational temperatures ranging from 1500 to 2200 K and an excitation temperature of 1–2 eV. While spark properties did not change with either gas composition or polymer composition, it was determined that the addition of hydrogen promoted higher concentrations of gaseous phase products (promoting hydrogenolysis). [ABSTRACT FROM AUTHOR]

Outside Front Cover: A spark discharge in an argon and argon–hydrogen mixture provides evidence of plastic depolymerization of low‐density polyethylene, polypropylene, and polyethylene terephthalate. Light hydrocarbon products and the resulting polymer surface are analyzed and connected to the discharge properties.For further information see the article by Roxanne Z. Walker, Sophia Gershman, Dorothy E. Doughty, and John E. Foster (e2300155).By Roxanne Z. Walker; Sophia Gershman; Dorothy E. Doughty and John E. FosterReported by Author; Author; Author; Author [Extracted from the article]

There is an urgent need for disinfection and sterilization devices accessible to the public that can be fulfilled by innovative strategies for using cold atmospheric pressure plasmas. Here, we demonstrate a successful novel combination of a flexible printed circuit design of a dielectric barrier discharge (flex-DBD) with an environmentally safe chemical reagent for surface decontamination from bacterial contaminants. Flex-DBD operates in ambient air, atmospheric pressure, and room temperature without any additional gas flow at a power density not exceeding 0.5 W/cm2. The flex-DBD activation of a 3% hydrogen peroxide solution results in the reduction in the bacterial load of a surface contaminant of > 6log10 in 90 s, about 3log10 and 2log10 better than hydrogen peroxide alone or the flex-DBD alone, respectively, for the same treatment time. We propose that the synergy between plasma and hydrogen peroxide is based on the combined action of plasma-generated OH· radicals in the hydrogen peroxide solution and the reactive nitrogen species supplied by the plasma effluent. A scavenger method verified a significant increase in OH· concentration due to plasma treatment. Novel in-situ FTIR absorption spectra show the presence of O3, NO2, N2O, and other nitrogen species. Ozone dissolving in the H2O2 solution can effectively generate OH· through a peroxone process. The addition of the reactive nitrogen species increases the disinfection efficiency of the hydroxyl radicals and other oxygen species. Hence, plasma activation of a low concentration hydrogen peroxide solution, using a hand-held flexible DBD device results in a dramatic improvement in disinfection. [ABSTRACT FROM AUTHOR]

3D printing has become popular for a variety of users, from home hobbyists to scientists and engineers interested in producing their own laboratory equipment. In order to determine the suitability of 3D printed parts for our plasma physics laboratory, we measured the accuracy, strength, vacuum compatibility, and electrical properties of pieces printed in plastic. The flexibility of rapidly creating custom parts has led to the 3D printer becoming an invaluable resource in our laboratory. The 3D printer is also suitable for producing equipment for advanced undergraduate laboratories. [ABSTRACT FROM AUTHOR]

Plasmas have a beguiling way of getting students interested in physics. We argue that plasmas can and should be incorporated into the undergraduate curriculum as both demonstrations and advanced investigations of electromagnetism and quantum effects. We describe a device, based on a direct-current (dc) glow discharge tube, which allows for a number of experiments into topics such as electrical breakdown, spectroscopy, magnetism, and electron temperature. [ABSTRACT FROM AUTHOR]