Search

Background: Dromedary camels (Camelus dromedarius) are raised in extremely strict ecological conditions of deserts. Camels are vulnerable to many zoonotic infections. There are limited data on the occurrence of Q fever and borreliosis in camels, in Iran. Aims: The current study was focused on the occurrence of Coxiella burnetii and Borrelia spp. infection in the blood samples of Iranian camels using molecular assays. Effect of the presence of these infections on various hematological factors and some acutephase proteins (Hp, a1AGP, SAA) were also investigated. Methods: Blood samples were collected from 113 clinically healthy camels to investigate the presence of the infections using nested PCR. Moreover, the sequence of positive samples was analyzed phylogenetically. Routine haematological tests were performed and the concentrations of acute-phase proteins were measured in serum using enzyme immunoassay. Results: PCR result showed that 6.19% (95% CI: 2.53-12.35%) (7/113) of camels were positive for C. burnetii. In addition, sequencing results of the corresponding gene of the outer membrane protein (com1) revealed two different genotypes of C. burnetii agent in camels from Southern Iran. In the PCR assay, Borrelia spp. DNA was not detected in the samples. No significant difference was observed in hematological parameters or acute-phase proteins between positive and negative Q fever camels except for mean corpuscular hemoglobin (MCH) and red cell distribution width (RDW). Conclusion: Clinically healthy camels might be very important reservoirs of zoonotic pathogens. Q fever is not considered a notifiable disease in camels of Iran, and clinical cases may scarcely be recognized by the healthcare system. Due to a lack of adequate information, additional studies on the molecular epidemiology and clinical pathology aspects of C. burnetii infection in Iran are needed. [ABSTRACT FROM AUTHOR]

This research centered on enhancing the mechanical properties of sustainable composite materials made from short flax fibers. Challenges associated with fiber–matrix adhesion and moisture absorption were systematically addressed. A water–alginate pre-treatment, combined with plasma modification, was employed to stabilize the fibers, ensuring their optimal preparation and improved compatibility with biopolymers. A thorough investigation of the effect of the plasma modulation using a duty cycle (DC) was conducted, and extensive physicochemical and mechanical analyses were performed. These efforts revealed conditions that preserved fiber integrity while significantly improving surface characteristics. Techniques such as optical emission spectroscopy (OES), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and Dynamic Mechanical Analysis (DMA) were utilized, providing a comprehensive understanding of the transformations induced by the plasma treatment. The findings underscored the critical role of alginate and precise plasma settings in enhancing the mechanical properties of the composites. Ultimately, this study made a substantial contribution to the field of eco-friendly materials, showcasing the potential of short flax fibers in sustainable composite applications and setting the stage for future advancements in this area.

Significant progress has been made in recent years in the use of atmospheric pressure plasma techniques for surface modification. This research focused on the beneficial effects of these processes on natural by-products, specifically those involving natural fiber-based materials. The study explored the deposition of hydrophobic organosilicon-like thin films onto flax fibres through plasma-enhanced chemical vapour deposition (PECVD), using tetramethylcyclotetrasiloxane (TMCTS) as the precursor. After the successful deposition of hydrophobic organosilicon-like thin films onto the flax fibres, polylactic acid (PLA) composite materials were fabricated. This fabrication process sets the stage for an in-depth analysis of the modified materials. Subsequently, these flax fabrics were subjected to meticulous characterization through scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and contact angle measurements. The results demonstrated successful TMCTS deposition on the surface which led to a complete hydrophobization of the flax fibers. Mechanical tests of the PLA/flax fibre composites revealed a significant improvement in load transfer and interfacial compatibility following the surface modification of the flax fibres. This improvement was attributed to the enhanced adhesion between the modified fibres and the PLA matrix. The findings highlight the potential of TMCTS-based PECVD as a practical surface modification technique, effectively enhancing the mechanical properties of PLA/flax fibre composites. These developments open exciting possibilities for sustainable and high-performance composite materials in various industries.

In this study, the main purpose is to predict the useful life of woolen hand-knotted carpets using multivariate multiple regression. Thickness loss of surface pile yarns and compression toughness index were chosen as representative of the compression properties. Also, color difference index (ΔE) of pile yarns, tuft size index, and evenness of texture index were considered as representative of the appearance characteristics. Eighteen woolen hand-knotted carpet samples (symmetric knot) with different structural specifications were produced. The carpet samples were subjected to 4000, 8000, and 12000 drum revolutions (wear factor) using a Hexapod tumbler tester and functional properties of samples were investigated in original and worn out carpet samples. At first, the effective variables were selected using multivariate test, and then multivariate analysis of variance was used for evaluating the significance of obtained models. Optimal separate equations of the functional properties on hand-knotted carpets were determined through multivariate multiple regression method. Reverse model of wear factor can be considered as a proper equation to predict the useful life of carpets. [ABSTRACT FROM AUTHOR]

Ammonium polyphosphate (APP) was grafted onto the surface of exfoliated graphite nanoplatelet (GNP) to obtain a novel flame retardant, GNP-g-APP, and thereafter was incorporated into the ethylene vinyl acetate (EVA) to improve its flame retardancy. The chemical structures of the precursors and the target product were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and energy dispersive X-ray spectroscopy (EDS) techniques. FTIR spectra appeared at 1056 and 1103 cm−1 were attributed to POC asymmetric stretching bond, that conformed formation of GNP-g-APP. Thermal stability behaviour and flame retardancy performance of the samples were evaluated by TGA, UL-94, micro-calorimetry, and cone calorimetry. TGA measurements revealed the superiority of GNP-g-APP over GNP. The micro-calorimetry analyses indicated a sharp fall in both the total heat release (THR) and the peak of heat release rate (pHRR) of EVA containing 30 wt.% GNP-g-APP, evidenced by a thick char layer formed as barrier. Cone calorimetry confirmed flame-retardant effect of GNP-g-APP featured by a reduction in pHRR (−63 %) and THR (−31.6 %) due to the formation of a cohesive char layer. Although GNP addition sharply decreased the elongation at break of 70/30 (w/w) composites from 500% for neat EVA to 71%, a very promising value of 364% for EVA/GNP-g-APP sample preserved superior flexibility.