Search

This paper describes development of a novel mid-infrared light emitting diode (LED) and photodiode (PD) light source/detector combination and use within a non-dispersive infrared (NDIR) carbon dioxide gas sensor. The LED/PD based NDIR sensor provides fast stabilisation time (time required to turn on the sensor from cold, warm up, take and report a measurement, and power down again ≈1 second), longevity (>15 years), low power consumption and low cost. Described performance is compatible with "fit and forget" wireless deployed sensors in applications such as indoor air quality monitoring/control & energy conservation in buildings, transport systems, horticultural greenhouses and portable deployment for safety, industrial and medical applications. Fast stabilisation time, low intrinsic power consumption and cycled operation offer typical energy consumption per measurement of mJ's, providing extended operation using battery and/or energy harvesting strategies (measurement interval of ≈ 2 minutes provides >10 years operation from one AA battery). Specific performance data is provided in relation to measurement accuracy and noise, temperature performance, cross sensitivity, measurement range (two pathlength variants are described covering ambient through to 100% gas concentration), comparison with NDIR utilizing thermal source/pyroelectric light source/detector combination and compatibility with energy harvesting. Semiconductor based LED/PD processing together with injection moulded reflective optics and simple assembly provide a route to low cost high volume manufacturing. [ABSTRACT FROM AUTHOR]

Measuring soil carbon dioxide efflux is a challenging task even when it is performed using respiration chambers. While gas samples are taken, measurement deviations become more evident according to the used chamber design especially when external disturbances occur. This paper studies the carbon dioxide concentration profiles within the top soil layers, and investigates the controlling factors affecting the process. The considered factors are diffusion, temperature and viscosity. The efflux equation is discussed and then it is linked with the soils geotechnical parameters, while a relationship between the Reynolds number within the soil and efflux is found. Emphasis on the importance of the external geometrical design considerations is shown through studying external boundary layer effects due to the chamber outer shell shape and how it interacts with blowing winds. Chamber stability on site of deployment is also of a significant importance considering external blowing winds. Internal geometrical considerations are linked with the flow turbulence within the dynamic chambers. It is highly recommended that respiration chamber designers need to work in parallel with a multidisciplinary team in order to make a chamber design that ensures the least disturbance to occur at the location of study. [ABSTRACT FROM AUTHOR]

European Commission has set clear targets for 2020 regarding energy and environment policy; these targets include 20% cut in greenhouse gas emissions against the 1990 levels. It is believed that adopted strategy has encouraged the renewable energy applications during the last two decades. Moreover, measurement deviations of carbon dioxide flux occurring in respiration chambers has been seen of a great importance to explain the biochemical parameters affecting the climate change issue. This is attributed on many occasions to chamber design constraints and the way they are coupled with the studied site location. This is illustrated by external disturbances whereby when they happen while gas measurements are taken measurement deviations become more evident. This paper surveys the different soil physical, biological and geotechnical parameters and links them to meteorological ones. Consequently it explores their direct and indirect effects to the produced soil efflux. Furthermore this paper proposes several soil temperature models according to the studied case constraints to see what affects soil efflux production. Moreover a clear understanding of what affects the measurement process was achieved through surveying all the internal and external pressure parameters and how they influence the chamber in relation to time. The conclusion is that respiration chamber designers need to preserve chamber internal temperature and pressure to be equal to the outer atmosphere for the case of stabile external conditions. For the case of unstable external conditions design counter measures are incorporated. Furthermore the appropriate gas sensor needs to be selected professionally with emphasis on the importance of installation location inside the chamber. Likewise soil bacterial type and soil temperature also has an influence on efflux production. [ABSTRACT FROM AUTHOR]

Background: The only classification of Müller-Weiss disease (MWD) is based primarily on Méary's talo-first metatarsal angle. It describes increasing sag of the medial longitudinal arch with greater degrees of compression and fragmentation of the navicular. Purportedly, the talar head pushes the subtalar joint into varus and drives the medial pole of the navicular medially, as it protrudes inferiorly and laterally. Its authors stipulated heel varus as a pre-requisite, coining the term 'paradoxical pes planus varus' to define heel varus and flatfoot as hallmark deformities of the condition.Methods: We measured Méary's and Kite's talocalcaneal angles, heel offset, anteroposterior thickness of the navicular at each naviculocuneiform (NC) joint, medial extrusion of the navicular and calculated percentage compression at each NC joint in 68 consecutive feet presenting with MWD. Morphology and activity at the various peri-navicular joints were studied using SPECT-CT in 45 feet.Results: Inverse relationships between Méary's angle and degree of navicular compression reach statistical significance at NC2 but not at NC3. Strong correlation exists between medial extrusion and percentage compression at NC2 and NC3. Medial extrusion is significantly greater on the affected side in unilateral cases and on the more compressed side in bilateral cases. Significant inverse relationships exist between Kite's angle and percentage compression at both NC2 and NC3 and degree of medial extrusion of the navicular. No correlation was detected between Kite's angle and either heel offset or Méary's angle. Varus heel offset was present in only 33% of cases. The combination of heel varus and negative Méary's angle was present in just 26% of cases, the commonest combination being heel valgus with sagging at 56%.Conclusion: Our findings confirm part of Maceira's hypothesized pathomechanism of MWD. Reductions in Kite's talocalcaneal angle confirm that lateral and inferior protrusion of the talar head causes increasing compression and medial extrusion of the navicular. However, such shift of the talar head does not always lead to heel varus. As such, we caution against universal advocacy of lateral displacement calcaneal osteotomy, as the heel is not always in varus in MWD. [ABSTRACT FROM AUTHOR]

Different acoustic wave modes are required for effective implementation of biosensing and liquid actuation functions in an acoustic wave-based lab-on-a-chip. For efficient sensing in liquids, shear waves (either a thickness-shear bulk wave or a shear-horizontal surface acoustic wave) can achieve a high sensitivity, without significant loss of acoustic wave energy. On the other hand, longitudinal bulk waves or out-of-plane displacement waves (such as Rayleigh waves) enable efficient sampling functions and liquid manipulation. However, there are significant challenges in developing a lab-on-a-chip to efficiently generate multiple wave modes and perform both these functions on a single piezoelectric substrate, especially when a single crystalline orientation is available. This paper highlights the latest progress in the theories and techniques to deliver both sensing and microfluidic manipulation functions using engineered inclined-angled piezoelectric films, allowing for the simultaneous generation of longitudinal (or Rayleigh) and thickness-shear bulk (or shear-horizontal surface acoustic) waves. Challenges and theoretical constraints for generating various wave modes in the inclined films and techniques to efficiently produce inclined columnar and inclined crystalline piezoelectric films using sputtering deposition methods are presented. Applications of different wave modes in the inclined film-based lab-on-chips with multiple sensing and acoustofluidic functions are also discussed. [ABSTRACT FROM AUTHOR]

Nozzleless jetting of droplets with different jetting angles is a crucial requirement for 2D and 3D printing/bioprinting applications, and Rayleigh mode surface acoustic waves (SAWs) could be a potential technique for achieving this purpose. Currently, it is critical to vary the jetting angles of liquid droplets induced by SAWs and control the liquid jet directions. Generally, the direction of the liquid jet induced by SAWs generated from a bulk piezoelectric substrate such as LiNbO3 is along the theoretical Rayleigh angle of ∼22°. In this study, we designed and manufactured thin-film SAW devices by depositing ZnO films on different substrates (including silicon and aluminium) to realize a wide range of jetting angles from ∼16° to 55° using propagating waves generated from one interdigital transducer. We then systematically investigated different factors affecting the jetting angles, including liquid properties, applied SAW power and SAW device resonant frequency. Finally, we proposed various methods using thin-film SAW devices together with different transducer designs for realizing a wide range of jetting angles within the 3D domain. A nozzleless jetting method is proposed using thin-film based surface acoustic wave devices to achieve a wide range of jetting angles for droplets. [ABSTRACT FROM AUTHOR]

Concept, design and practical implementation of a miniaturized spectrophotometer, utilized as a mid-infrared-based multi gas sensor is described. The sensor covers an infrared absorption wavelength range of 2.9 to 4.8 um, providing detection capabilities for carbon dioxide, carbon monoxide, nitrous oxide, sulphur dioxide, ammonia and methane. A lead selenide photo-detector array and customized MEMS-based micro-hotplate are used as the detector and broadband infrared source, respectively. The spectrophotometer optics are based on an injection moulded Schwarzschild configuration incorporating optical pass band filters for the spectral discrimination. This work explores the effects of using both fixed-line pass band and linear variable optical filters. We report the effectiveness of this low-power-consumption miniaturized spectrophotometer as a stand-alone single and multi-gas sensor, usage of a distinct reference channel during gas measurements, development of ideal optical filters and spectral control of the source and detector. Results also demonstrate the use of short-time pulsed inputs as an effective and efficient way of operating the sensor in a low-power-consumption mode. We describe performance of the spectrometer as a multi-gas sensor, optimizing individual component performances, power consumption, temperature sensitivity and gas properties using modelling and customized experimental procedures. [ABSTRACT FROM AUTHOR]

Background: This study analyzes position of the peroneal tendons and status of the superior peroneal retinaculum (SPR) whenever a lateral malleolar bony flake fracture occurs.Methods: Twenty-four patients had a lateral malleolar bony fleck on anteroposterior ankle radiographs, either in isolation or associated with other hindfoot injuries. We studied size of the bony flecks, presence or absence of peroneal tendon dislocation and pathoanatomy on CT scans.Results: In 11 patients, a small bony fleck lies within the superior peroneal retinaculum and contiguous periosteum, which are stripped off the lateral fibula (Class II lesions). Tendons dislocate into the subperiosteal pouch thus formed, resembling Class I lesions without associated bony avulsion. Treatment for Class II is same as for Class I injuries. In 8 patients with a big bony fleck, tendons dislocate into the fracture site and SPR is intact (Class III lesions). In Class IV lesions, observed in 5 patients with 2-part calcaneal fracture/dislocation, SPR remains intact and peroneal tendons are not dislocated. The invariably large fleck results from the displacing lateral calcaneal fragment abutting against the fibula, whereas the dislocating tendons cause the bony avulsions in Classes II and III.Conclusions: Due to pathoanatomical differences, surgical approach and natural history of neglected lesions differ depending on size of the bony fleck. The SPR must not be incised in case of big Class III flecks. [ABSTRACT FROM AUTHOR]

There are significant challenges in controlling uniformity of crystal inclination angles, growth orientations and film thicknesses to generate dual-mode surface acoustic waves (e.g., Rayleigh ones and shear-horizontal ones) for lab-on-a-chip applications. In this study, we demonstrate large area (up to three inches) and uniformly inclined piezoelectric ZnO films, sputtering-deposited on silicon using a glancing angle deposition method. Characterization using X-ray diffraction showed that the inclined ZnO films have an average crystal inclination angle of 29.0°, apart from the vertical (0002) orientation, at a substrate tilting angle of 30o. Reflection signals of ZnO/Si surface acoustic wave devices clearly show the generations of both shear horizontal surface acoustic waves and Rayleigh waves. The Rayleigh waves enable efficient acoustofluidic functions including streaming and transportation of sessile droplets. Excitation direction of Rayleigh waves on the acoustofluidics versus the inclined angle direction has apparent influences on the acoustofluidic performance due to the anisotropic microstructures of the inclined films. The same device has been used to demonstrate biosensing of biotin/streptavidin interactions in a liquid environment using the shear-horizontal surface acoustic waves, to demonstrate its potential for integration into a complete lab-on-a-chip device. [ABSTRACT FROM AUTHOR]