Search

Aerosol–cloud interactions in mixed-phase clouds (MPCs) are one of the most uncertain drivers of the hydrological cycle and climate change. A synergy of in situ, remote-sensing and modelling experiments were used to determine the source of ice-nucleating particles (INPs) for MPCs at Mount Helmos in the eastern Mediterranean. The influences of boundary layer turbulence, vertical aerosol distributions and meteorological conditions were also examined. When the observation site is in the free troposphere (FT), approximately 1 in ×106 aerosol particles serve as INPs around -25 °C. The INP abundance spans 3 orders of magnitude and increases in the following order: marine aerosols; continental aerosols; and, finally, dust plumes. Biological particles are important INPs observed in continental and marine aerosols, whereas they play a secondary, although important, role during Saharan dust events. Air masses in the planetary boundary layer (PBL) show both enriched INP concentrations and a higher proportion of INPs to total aerosol particles, compared with cases in the FT. The presence of precipitation/clouds enriches INPs in the FT but decreases INPs in the PBL. Additionally, new INP parameterizations are developed that incorporate the ratio of fluorescent-to-nonfluorescent or coarse-to-fine particles and predict >90 % of the observed INPs within an uncertainty range of a factor of 10; these new parameterizations exhibit better performance than current widely used parameterizations and allow ice formation in models to respond to variations in dust and biological particles. The improved parameterizations can help MPC formation simulations in regions with various INP sources or different regions with prevailing INP sources. [ABSTRACT FROM AUTHOR]

The purpose of this study is to understand the drivers of cloud droplet formation in orographic clouds. We used a combination of modeling, in situ, and remote sensing measurements at the high-altitude Helmos Hellenic Atmospheric Aerosol and Climate Change ((HAC) 2) station, which is located at the top of Mt. Helmos (1314 m above sea level), Greece, during the Cloud–AerosoL InteractionS in the Helmos Background TropOsphere (CALISHTO) campaign in fall 2021 (https://calishto.panacea-ri.gr/ , last access: 1 August 2024) to examine the origins of the aerosols (i.e., local aerosol from the planetary boundary layer (PBL) or long-range-transported aerosol from the free-tropospheric layer (FTL) contributing to the cloud condensation nuclei (CCN)), their characteristics (hygroscopicity, size distribution, and mixing state), and the vertical velocity distributions and resulting supersaturations. We found that the characteristics of the PBL aerosol were considerably different from FTL aerosol and use the aerosol particle number and equivalent mass concentration of the black carbon (eBC) in order to determine when (HAC) 2 was within the FTL or PBL based on time series of the height of the PBL. During the (HAC) 2 cloud events we sample a mixture of interstitial aerosol and droplet residues, which we characterize using a new approach that utilizes the in situ droplet measurements to determine time periods when the aerosol sample is purely interstitial. From the dataset we determine the properties (size distribution and hygroscopicity) of the pre-cloud, activated, and interstitial aerosol. The hygroscopicity of activated aerosol is found to be higher than that of the interstitial or pre-cloud aerosol. A series of closure studies with the droplet parameterization shows that cloud droplet concentration (Nd) and supersaturation can be predicted to within 25 % of observations when the aerosol size distributions correspond to pre-cloud conditions. The analysis of the characteristic supersaturation of each aerosol population indicates that droplet formation in clouds is aerosol-limited when formed in FTL air masses – hence droplet formation is driven by aerosol variations, while clouds formed in the PBL tend to be velocity-limited and droplet variations are driven by fluctuations in vertical velocity. Given that the cloud dynamics do not vary significantly between air masses, the variation in aerosol concentration and type is mostly responsible for these shifts in cloud microphysical state and sensitivity to aerosol. With these insights, the remote sensing of cloud droplets in such clouds can be used to infer either CCN spectra (when in the FTL) or vertical velocity (when in the PBL). In conclusion, we show that a coordinated measurement of aerosol and cloud properties, together with the novel analysis approaches presented here, allows for the determination of the drivers of droplet formation in orographic clouds and their sensitivity to aerosol and vertical velocity variations. [ABSTRACT FROM AUTHOR]

Remote sensing has been a key resource for developing extensive and detailed datasets for studying and constraining aerosol-cloud-climate interactions. However, aerosol-cloud collocation challenges, algorithm limitations, as well as difficulties in unraveling dynamic from aerosol-related effects on cloud microphysics, have long challenged precise retrievals of cloud droplet number concentrations. By combining a series of remote sensing techniques and in situ measurements at ground level, we developed a semiautomated approach that can address several retrieval issues for a robust estimation of cloud droplet number for non-precipitating Planetary Boundary Layer (PBL) clouds. The approach is based on satellite retrievals of the PBL cloud droplet number (Ndsat) using the geostationary meteorological satellite data of the Optimal Cloud Analysis (OCA) product, which is obtained by the Spinning Enhanced Visible and InfraRed Imager (SEVIRI) of the European Organization for the Exploitation of Meteorological Satellites (EUMETSAT). The parameters of the retrieval are optimized through closure with droplet number obtained from a combination of ground-based remote sensing data and in situ observations at ground level. More specifically, the remote sensing data are used to retrieve cloud-scale vertical velocity, and the in situ aerosol measurements at ground level were used constrain as input to a state-of-the-art droplet activation parameterization to predict the respective Cloud Condensation Nuclei (CCN) spectra, cloud maximum supersaturation and droplet number concentration (Nd), accounting for the effects of vertical velocity distribution and lateral entrainment. Closure studies between collocated Nd and Nd sat are then used to evaluate exising droplet spectral width parameters used for the retrieval of droplet number, and determine the optimal values for retrieval. This methodology, used to study aerosol-cloud interactions for non-precipitating clouds formed over the Athens Metropolitan Area (AMA), Greece, during the springtime period from March to May 2020, shows that droplet closure can be achieved to within ±33.4%, comparable to the level of closure obtained in many in situ studies. Given this, the ease of applying this approach with satellite data obtained from SEVIRI with high temporal (15 min) and spatial resolution (3.6 km Ã--4.6 km), opens the possibility of continuous and reliable Ndsat, giving rise to high value datasets for aerosol-cloud-climate interaction studies. [ABSTRACT FROM AUTHOR]

Aerosol-cloud interactions in mixed-phase clouds (MPCs) are one of the most uncertain drivers of the hydrological cycle and climate change. A synergy of in-situ, remote sensing and modelling experiments was used to determine the source of ice nucleating particles (INPs) for MPCs at Mount Helmos in the Eastern Mediterranean. The influences of boundary layer turbulence, vertical aerosol distributions and meteorological conditions were also examined. When the observation site is in the Free Troposphere (FT), approximately 1 in 106 aerosol particles serve as INPs. The INP abundance spans three orders of magnitude and increases following the order of marine aerosols, continental aerosols, and finally, dust plumes. Biological particles are important INPs observed in continental and marine aerosols, whereas they play a secondary yet important role even during Saharan dust events. Air masses in the planetary boundary layer (PBL) show both enriched INP concentrations and higher proportion of INPs in comparison to total aerosol particles, different from cases in the FT. The presence of precipitations/clouds enriches INPs in the FT but decreases INPs in the PBL. Additionally, new INP parameterizations, incorporating the ratio of fluorescent-to-nonfluorescent or coarse-to-fine particles and predicting >90% of the observed INPs within an uncertainty range of a factor of 10, exhibit better performance than current widely-used parameterizations, and allow ice formation in models to respond to variations in dust and biological particles. The improved parameterizations can help MPC formation simulations in regions with various INP sources or different regions with prevailing INP source. [ABSTRACT FROM AUTHOR]

Extensive continuous particle number size distribution measurements took place during two summers (2020 and 2021) at 11 sites in Greece for the investigation of the frequency and the spatial extent of new particle formation (NPF). The study area is characterized by high solar intensity and fast photochemistry and has moderate to low fine particulate matter levels during the summer. The average PM 2.5 levels were relatively uniform across the examined sites. The NPF frequency during summer varied from close to zero in the southwestern parts of Greece to more than 60 % in the northern, central, and eastern regions. The mean particle growth rate for each station varied between 3.4 and 8 nm h -1 , with an average rate of 5.7 nm h -1. At most of the sites there was no statistical difference in the condensation sink between NPF event and non-event days, while lower relative humidity was observed during the events. The high-NPF-frequency sites in the north and northeast were in close proximity to both coal-fired power plants (high emissions of SO 2) and agricultural areas with some of the highest ammonia emissions in the country. The southern and western parts of Greece, where NPF was infrequent, were characterized by low ammonia emissions, while moderate levels of sulfuric acid were estimated (10 7 molec. cm -3) in the west. Although the emissions of biogenic volatile organic compounds were higher in western and southern sectors, they did not appear to lead to enhanced frequency of NPF. The infrequent events at these sites occurred when the air masses had spent a few hours over areas with agricultural activities and thus elevated ammonia emissions. Air masses arriving at the sites directly from the sea were not connected with atmospheric NPF. These results support the hypothesis that ammonia and/or amines limit new particle formation in the study area. [ABSTRACT FROM AUTHOR]

Extensive continuous particle number size distribution measurements took place during two summers (2020 and 2021) in 11 sites in Greece for the investigation of the frequency and the spatial extent of new particle formation (NPF). The study area is characterized by high solar intensity, fast photochemistry, and has moderate to low fine particulate matter levels during the summer. The average PM2.5 levels were relatively uniform across the examined sites. The NPF frequency during summer varied from close to zero in the southwestern parts of Greece to more than 60 % in the northern, central, and eastern regions. The mean particle growth rate for each station varied between 3.4 and 8 nm h-1, with an average rate of 5.7 nm h-1. In most of the sites there was no statistical difference in the condensation sink between NPF event and non-event days, while lower relative humidity was observed during the events. The high NPF frequency sites in the north and northeast were in close proximity to both coal-fired power plants (high emissions of SO2) and to agricultural areas with some of the highest ammonia emissions in the country. The southern and western parts of Greece, where NPF was infrequent, were characterized by low ammonia emissions, while moderate levels of sulfuric acid were estimated (107 molecules cm-3) in the west. Although the emissions of biogenic volatile organic compounds were higher in western and southern sectors, they did not appear to lead to enhanced frequency of NPF. The infrequent events in these sites occurred when the air masses had spent a few hours over areas with agricultural activities, and thus elevated ammonia emissions. Air masses arriving at the sites directly from the sea were not connected with atmospheric nucleation. These results support the hypothesis that ammonia and/or amines are limiting new particle formation in the study area. [ABSTRACT FROM AUTHOR]

Aerosol hygroscopicity is a key aerosol property, influencing a number of other physical properties, and the impacts of PM pollution on the environment, climate change, and health. The present work aims to provide insight into the contribution of major PM sources to aerosol hygroscopicity, focusing on an urban background site, with a significant impact from both primary and secondary sources. The EPA PMF 5.0 model was applied to PM2.5 chemical composition and hygroscopicity data collected from August 2016 to July 2017 in Athens, Greece. Source apportionment analysis resulted in six major sources, including four anthropogenic sources (vehicular exhaust and non-exhaust, heavy oil combustion, and a mixed source of secondary aerosol formation and biomass burning) and two natural sources (mineral dust and aged sea salt). The mixed source was found to be the main contributor to PM2.5 levels (44%), followed by heavy oil combustion (26%) and vehicular traffic exhaust and non-exhaust emissions (15%). The aerosol hygroscopic growth factor (GF) was found to be mainly associated with the mixed source (by 36%) and heavy oil combustion (by 24%) and, to a lesser extent, with vehicle exhaust (by 19%), aged sea salt (by 14%), and vehicle non-exhaust (by 6%). [ABSTRACT FROM AUTHOR]

The present study focused on the estimation of the personal dose of airborne particles using an exposure dose model (ExDoM2). Input data from three European cities (Athens, Kuopio, Lisbon) were selected to implement the model that calculates the deposited dose and retention of particles in the respiratory tract, the mass transferred to the oesophagus and the absorption to blood as well as the dose for five particle-bound metals. Model results showed that after one day exposure higher deposited dose in the respiratory tract was obtained for Lisbon as a direct consequence of the higher PM concentration measured in this city. Moreover, the activity profile and the physical characteristics of the exposed subject had strong impact on the estimated deposited dose. Thus, light activity corresponded to higher deposited dose compared to no activity as well as an adult male exhibited higher dose, both findings associated with increased inhalation rate. Regarding the internal dose for particle-bound metals higher dose for four out of the five metals was obtained in lungs followed by the muscles for As, the gastrointestinal tract for Cr, the other tissues for Mn, the intestines for Cd and finally for Pb higher dose was found in bones and blood. [ABSTRACT FROM AUTHOR]

Abstract: Zinc ferrites, ZnFe2O4 and zinc ferrite nanoparticles substituted with indium and yttrium, Zn1−x In x Fe2O4 and ZnY x Fe2−x O4 (0≤x≤0.3), were synthesized by co-precipitation method. We have investigated the effect of composition on the cation distribution in the spinel structure, and on the magnetic properties with a view to obtain magnetic ceramics with improved properties compared to their bulk counter parts. The results of X–ray diffraction (XRD) and transmission electron microscopy (TEM) confirmed the nanoscale dimensions and spinel structure of the samples. The estimated crystallite size lies within the range 4–10nm. Additional experiments had been conducted using a scanning mobility particle sizer spectrometer (SMPS) in order to measure the number size distribution of the nanoparticles. Mössbauer spectroscopy was used to investigate the cation distribution between the tetrahedral and octahedral sites and the formation of the partially inverse spinel. The study of the magnetic properties showed that the hysteresis loops do not saturate even in the presence of high magnetic fields, confirming the superparamagnetic single domain nature of the samples. The particle size and composition variations (e.g. addition of yttrium and indium) cause significant structural rearrangements which affect the magnetic behavior of these materials. [Copyright &y& Elsevier]