Search

Vibration measurements were carried out using highly sensitive accelerometers in an experimental ladle integrated into the LIMMCAST (Liquid Metal Model for Steel Casting) facility at HZDR. The model is operated with liquid Sn–40 wt pctBi alloy at 200 °C, whose physical properties are close to those of molten steel. Three accelerometers were attached to the outer wall of the LIMMCAST vessel to record the vibrations caused by the argon bubble flow in the liquid metal at different process parameters. The results obtained at the liquid metal experiments differ from those reported for water models where the relationship between root mean square (RMS) value of the vibration amplitude and the gas flow rate follows different curve shapes. Furthermore, the results of vibration measurements in the LIMMCAST model are compared with vibration measurements in a steel plant during vacuum degassing. The comparison of the RMS data shows a fairly good agreement. This indicates that the vibrations in both the industrial process and the laboratory model are caused by the same physical mechanisms, and thus, the vibration behavior in an industrial steelmaking ladle can be reproduced quite well by suitable liquid metal models. These studies on bubble flows can help to improve the understanding of industrial stirring processes and thus contribute to a better process control.

The aim of the BLEMAB project (BLast furnace stack density Estimation through online Muons ABsorption measurements) is the application of muon radiography techniques, to image a blast furnace’s inner zone. In particular, the goal of the study is to characterize the geometry and size of the so-called “cohesive zone”, i.e., the spatial region where the slowly downward-moving material begins to soften and melt, which plays such an important role in the performance of the blast furnace itself. Thanks to the high penetration power of natural cosmic-ray muon radiation, muon transmission radiography could be an appropriate non invasive methodology for the imaging of large high-density structures such as a blast furnace, whose linear dimensions can be up to a few tens of meters. A state-of-the-art muon tracking system is currently in development and will be installed at a blast furnace on the ArcelorMittal site in Bremen (Germany), where it will collect data for a period of various months. In this paper, the status of the project and the expectations based on preliminary simulations are presented and briefly discussed.

The European project called BLEMAB (BLast furnace stack density Estimation through on-line Muons ABsorption measurements), provides for the application of the muon radiography technique in the industrial environment. The project represents a non-invasive way of monitoring a blast furnace and in particular aims to study the geometric and density development of the so-called “cohesive zone”, which is important for the performance of the blast furnace itself. The installation of the detectors is expected in 2022 at the ArcelorMittal site in Bremen (Germany). This paper describes the status of the project, the experimental setup and the first results obtained with preliminary simulations. © 2022 Societa Italiana di Fisica. All rights reserved.

Genome-wide association studies (GWASs) have identified hundreds of loci associated with Crohn's disease (CD). However, as with all complex diseases, robust identification of the genes dysregulated by noncoding variants typically driving GWAS discoveries has been challenging. Here, to complement GWASs and better define actionable biological targets, we analyzed sequence data from more than 30,000 patients with CD and 80,000 population controls. We directly implicate ten genes in general onset CD for the first time to our knowledge via association to coding variation, four of which lie within established CD GWAS loci. In nine instances, a single coding variant is significantly associated, and in the tenth, ATG4C, we see additionally a significantly increased burden of very rare coding variants in CD cases. In addition to reiterating the central role of innate and adaptive immune cells as well as autophagy in CD pathogenesis, these newly associated genes highlight the emerging role of mesenchymal cells in the development and maintenance of intestinal inflammation.Large-scale sequence-based analyses identify novel risk variants and susceptibility genes for Crohn's disease, and implicate mesenchymal cell-mediated intestinal homeostasis in disease etiology.

BACKGROUND: The pancreatic β cell, as the sole source of the vital hormone insulin, has been under intensive study for more than a century. Given the potential of newly created insulin-producing cells as a treatment or even cure of type 1 diabetes (T1D) and possibly in severe cases of type 2 diabetes (T2D), multiple academic and commercial laboratories are working to derive surrogate glucose-responsive, insulin-producing cells. SCOPE OF REVIEW: The recent development of advanced phenotyping technologies, including molecular, epigenomic, histological, or functional, have greatly improved our understanding of the critical properties of human β cells. Using this information, here we summarize the salient features of normal, fully functional adult human β cells, and propose minimal criteria for what should rightfully be termed 'β cells' as opposed to insulin-producing but not fully-functional surrogates that we propose should be referred to as 'β-like' cells or insulin-producing cells. MAJOR CONCLUSIONS: Clear criteria can be established to differentiate fully functional, mature β cells from 'β-like' surrogates. In addition, we outline important knowledge gaps that must be addressed to enable a greater understanding of the β cell.

The hydrogen isotope composition of leaf-wax-derived biomarkers, e.g., long-chain n-alkanes (δ2Hn-alkane), is widely applied in paleoclimate. However, a direct reconstruction of the isotope composition of source water based on δ2Hn-alkane alone is challenging due to the enrichment of heavy isotopes during evaporation. The coupling of δ2Hn-alkane with δ18O of hemicellulose-derived sugars (δ18Osugar) has the potential to disentangle this limitation and additionally to allow relative humidity reconstructions. Here, we present δ2Hn-alkane as well as δ18Osugar results obtained from leaves of Eucalyptus globulus, Vicia faba, and Brassica oleracea, which grew under controlled conditions. We addressed the questions of (i) whether δ2Hn-alkane and δ18Osugar values allow reconstructions of leaf water isotope composition, (ii) how accurately the reconstructed leaf water isotope composition enables relative humidity (RH) reconstruction, and (iii) whether the coupling of δ2Hn-alkane and δ18Osugar enables a robust source water calculation. For all investigated species, the n-alkane n-C29 was most abundant and therefore used for compound-specific δ2H measurements. For Vicia faba, additionally the δ2H values of n-C31 could be evaluated robustly. Regarding hemicellulose-derived monosaccharides, arabinose and xylose were most abundant, and their δ18O values were therefore used to calculate weighted mean leaf δ18Osugar values. Both δ2Hn-alkane and δ18Osugar yielded significant correlations with δ2Hleaf water and δ18Oleaf water, respectively (r2=0.45 and 0.85, respectively; p, n=24). Mean fractionation factors between biomarkers and leaf water were found to be −156 ‰ (ranging from −133 ‰ to −192 ‰) for εn-alkane/leaf water and +27.3 ‰ (ranging from +23.0 ‰ to 32.3 ‰) for εsugar/leaf water, respectively. Modeled RHair values from a Craig–Gordon model using measured Tair, δ2Hleaf water and δ18Oleaf water as input correlate highly significantly with modeled RHair values (R2=0.84, p, RMSE = 6 %). When coupling δ2Hn-alkane and δ18Osugar values, the correlation of modeled RHair values with measured RHair values is weaker but still highly significant, with R2=0.54 (p, RMSE = 10 %). Finally, the reconstructed source water isotope composition (δ2Hs and δ18Os) as calculated from our coupled approach matches the source water in the climate chamber experiment (δ2Htank water and δ18Otank water). This highlights the great potential of the coupled δ2Hn-alkane–δ18Osugar paleohygrometer approach for paleoclimate and relative humidity reconstructions.

Previous paleolimnological studies demonstrated that the sediments of Garba Guracha, situated at 3950 m asl in the afro-alpine zone of the Bale Mountains of Ethiopia, provide a complete Late Glacial and Holocene paleoclimate and environmental archive. We revisited Garba Guracha in order to retrieve new sediment cores and to apply new environmental proxies, e.g. charcoal, diatoms, biomarkers, and stable isotopes. Our chronology is established using 210Pb dating and radiocarbon dating of bulk sedimentary organic matter, bulk n-alkanes, and charcoal. Although bedrock was not reached during coring, basal ages confirm that sedimentation started at the earliest ~ 16 cal kyr BP. The absence of a systematic age offset for the n-alkanes suggests that “pre-aging” is not a prominent issue in this lake, which is characterised by a very small afro-alpine catchment. X-ray fluorescence scans and total organic carbon contents show a prominent transition from minerogenic to organic-rich sediments around 11 cal kyr BP coinciding with the Holocene onset. While an unambiguous terrestrial versus aquatic source identification seems challenging, the n-alkane-based Paq proxy, TOC/N ratios, δ13C values, and the sugar biomarker patterns suggest a predominantly autochthonous organic matter source. Supraregional climate events, such as the African Humid Period, the Younger Dryas (YD), a 6.5 cal kyr BP short drying event, and the 4.2 cal kyr BP transition to overall drier climate are recorded in our archive. The Garba Guracha record suggests that northern hemisphere forcings played a role in the Eastern African highland paleoclimate., Deutsche Forschungsgemeinschaft http://dx.doi.org/10.13039/501100001659