Search

Statement of Problem: Excellent optical properties are essential for esthetic dental materials. However, the translucency and color masking ability of zirconia fabricated with nanoparticle jetting (NPJ), a type of printed zirconia, are unknown., Purpose: The purpose of this in vitro study was to evaluate the translucency and color masking ability of zirconia fabricated using NPJ., Material and Methods: A total of 90 specimens with thicknesses of 1.5, 1.0, and 0.5 mm were fabricated using high translucent milled zirconia (HT), low translucent milled zirconia (LT), and NPJ. CIELab values (L*, a*, and b*) of the specimens over 7 backgrounds, black, white, VitaB1, VitaA2, VitaA4, gold alloy (Au), and titanium (Ti), were obtained using a spectral radiometer. The relative translucency parameter (RTP) and color difference (∆E) of specimens over VitaB1, VitaA4, Au, and Ti were determined using VitaA2 as the control with the CIEDE2000 color difference equation. The normality of the data distribution was determined using the Shapiro-Wilk test. Differences among groups were analyzed using 2-way analysis of variance and the Student-Newman-Keuls (SNK) post hoc test (α=.05). The ∆E of specimens was analyzed according to perceptibility (∆E=0.8) and acceptability (∆E=1.8) thresholds using the 1 sample t test. The correlation between RTP and ∆E and RTP/∆E and thickness was examined using the Pearson correlation analysis., Results: Statistically significant differences were observed in translucency and color masking ability among HT, LT, and NPJ (P<.05). The RTP value was the lowest for zirconia fabricated with NPJ (P<.001) and highest for HT (P<.001). Monolithic zirconia fabricated with NPJ had lower ∆E values than those of HT and LT for the same thickness and background (P<.05). A positive correlation was found in RTP and ∆E (P<.001). A negative correlation was observed in RTP and thickness (P<.001) and ∆E and thickness across a constant background (P<.001)., Conclusions: Zirconia fabricated with NPJ was less translucent and had a greater color masking ability for discolored backgrounds than HT and LT., (Copyright © 2024 Editorial Council for The Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Purpose: To evaluate the stress distribution along a premolar's root dentin, its post, and its post-luting agent when materials with different elastic moduli are used to fabricate one-piece post-and-cores in two different designs., Materials and Methods: Two 3D virtual models (for cylindrical and conical post designs) of a mandibular premolar restored with one-piece post-and-core restorations were obtained using a software. A total of eight post-and-core materials were tested: polyetheretherketone (PEEK), polyetherketoneketone (PEKK), glass fiber-reinforced polyetheretherketone (GFR-PEEK), carbon fiber-reinforced polyetheretherketone (CFR-PEEK), gold-palladium alloy (Au-Pd), titanium (Ti), zirconia (Zi), and chromium-nickel (Cr-Ni). Maximum principals stress (MPS) in the post, post-luting agent, and root dentin were determined. A load of 150 N was applied to the buccal cusp in the linguo-labial direction at an angle of 45 degrees oblique to the longitudinal axis of the crown., Results: The highest MPS value in post structure was observed with Cr-Ni material for both post designs. Similarly, the highest MPS value in the post-luting agent was observed for Cr-Ni, the material with the highest elastic modulus. However, in the root dentin, the highest value was observed in PEEK, the material with the lowest elastic modulus., Conclusions: Post material and design influenced the stress concentration in the post, post-luting agent, and root dentin. The stress at the root dentin was slightly higher for polymeric materials. Cylindrical post design revealed lower stresses than conical post design at root dentin for all post-and-core materials tested.

Silver-gold nanocrystalline films were sputtered on HDPE substrates by a physical vapour deposition process using alloys with a nominal composition of 65% silver/35% gold or 35% silver/65% gold by weight, with comparison to a 100% silver target. Novel process conditions were introduced to include both water and oxygen as reactive gases. X-ray diffraction and chemical digests were used to assess the structure and chemical composition of the films. Log reductions and corrected zone of inhibition tests were used to measure the biological properties. Despite a range of physical and chemical properties, biological tests showed that the bactericidal properties of all silver-gold films were comparable with silver-only films in the short term and 65% silver films made with Novel sputtering conditions had comparable bacteriostatic abilities to silver-only over a 7-day period. The benefit of including gold may be seen in future studies of anti-inflammatory activity., (© 2023 The Authors. International Wound Journal published by Medicalhelplines.com Inc and John Wiley & Sons Ltd.)

The aim of this study was to investigate the effect of repeated casting and heat treatment on the corrosion resistance of a commercial Ag-Pd-Cu-Au alloy as evaluated by electrochemical techniques. After repeated casting, the fifth cast of the Ag-Pd-Cu-Au alloy exhibited dramatic degradation of properties, although upon heat treatment, this corrosion resistance did improve. Despite the improvement by heat treatment, after five castings, this alloy may not have satisfactory hardness for clinical use. These results of this study demonstrate that, up to the fourth cast and heat treatment, the Ag-Pd-Cu-Au alloy has acceptable corrosion resistance and hardness.

Purpose: To clarify the effect of a multi-purpose primer combining several functional monomers on two prosthodontic materials (cast titanium and a gold alloy) after airborne-particle abrasion., Methods: Disk-shaped adherends were prepared from cast titanium (CP Titanium JIS2) and a gold alloy (Casting Gold M.C. Type IV). A silane-containing two-liquid primer (M&C primer (MC)) and two silane-free single-liquid primers (Alloy Primer (AP) and V-Primer (VP)) were used as surface-treatment agents. The shear bond strengths were determined before and after thermocycling to evaluate the adhesive durability, and the results were compared using a non-parametric statistical analysis. The effect of airborne-particle abrasion with alumina on the titanium surface was analyzed by X-ray photoelectron spectroscopy (XPS)., Results: There was no significant difference in bond strength between the MC and AP before and after thermocycling, whereas VP showed significantly lower values. XPS revealed that the titanium acquired hydrophilic properties after the airborne-particle abrasion., Conclusions: The novelty of this study is that it shows that the presence/absence of the silane had no effect on the bonding of cast titanium with an acrylic resin. The study also showed that the multi-purpose primer can be used without any problems with both cast titanium and gold alloy, in combination with airborne-particle abrasion with alumina.

Statement of Problem: The in vivo release of Pd from palladium alloys into the oral environment and sensitivity reactions by patients has been of concern. However, little information is available about the variation in elemental release from different palladium alloys., Purpose: The purpose of this in vitro study was to compare the elemental release into a corrosion-testing medium from a high-palladium alloy (Freedom Plus, 78Pd-8Cu-5Ga-6In-2Au) and a Pd-Ag alloy (Super Star, 60Pd-28Ag-6In-5Sn) under different conditions., Material and Methods: Alloys were cast into Ø12×1-mm-thick disks, subjected to simulated porcelain-firing heat treatment, polished, and ultrasonically cleaned in ethanol. Three specimens of each alloy were immersed for 700 hours in a solution for in vitro corrosion testing (ISO Standard 10271) that was maintained at 37 °C. Two solution volumes (125 mL and 250 mL) were used, and the solutions were subjected to either no agitation or agitation. Elemental compositions of the solutions were analyzed by using inductively coupled plasma-mass spectroscopy (ICP-MS). Concentrations of released elements from each alloy for the 2 solution volumes and agitation conditions were compared by using the restricted maximum likelihood estimation method with a 4-way repeated-measures ANOVA, the Satterwhite degrees of freedom method, a lognormal response distribution, and the covariance structure of compound symmetry., Results: For the 4 combinations of solution volume and agitation conditions, the mean amount of palladium released was 3 orders of magnitude less for the Pd-Ag alloy (0.009 to 0.017 μg/cm 2 of alloy surface) compared with the Pd-Cu-Ga alloy (17.9 to 28.7 μg/cm 2 ). Larger mean amounts of Sn, Ga, Ag, and In (0.29 to 0.39, 0.57 to 0.83, 0.71 to 1.08, and 0.91 to 1.25 μg/cm 2 , respectively) compared with Pd were released from the Pd-Ag alloy. Smaller amounts of Cu, Ga, and In (4.8 to 9.9, 5.9 to 12.8, and 4.2 to 9.5 μg/cm 2 , respectively) compared with Pd were released from the Pd-Cu-Ga alloy. The Ru released was much lower for the Pd-Ag alloy (0.002 μg/cm 2 ) than the Pd-Cu-Ga alloy (0.032 to 0.053 μg/cm 2 ). Statistically significant differences (P<.001) in elemental release were found for the factors of alloy and element and the alloy×element interaction. Significant differences were found for the solution volume (P=.022), solution volume×element interaction (P=.022), and alloy×solution volume×element interaction (P=.004). No significant effect was found for agitation condition., Conclusions: The relative amounts of released elements from each alloy were not proportional to the relative amounts in the composition. The amounts of Pd and Ga released from the Pd-Cu-Ga alloy were consistent with the breakdown of a Pd 2 Ga microstructural phase and perhaps some dissolution of the palladium solid solution matrix. Precipitates, rather than the palladium solid solution matrix, appeared to undergo greater dissolution in the Pd-Ag alloy. The Pd-Ag alloy should have lower risk of adverse biological reactions than the Pd-Cu-Ga alloy., (Copyright © 2021 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

This study assessed the effect of a primer containing 10-methacryloyloxydecyl-(2-thiohydantoin-4-yl)propionate (MDTHP) on the bonding of noble metal alloys to an acrylic resin. Three noble metal alloys were selected as adherends, and V-Primer containing 6-(4-vinylbenzyl-n-propyl)amino-1,3,5-triazine-2,4-dithione was used as a comparative control. The disk specimens of each noble metal alloy were wet-ground and divided into three conditions: specimens primed with MDTHP primer or V-Primer, and specimens without priming. An acrylic resin was bonded to each specimen, and the specimens were performed the shear bond test. The MDTHP primer showed higher shear bond strength than the V-Primer for all specimens. X-ray photoelectron spectroscopic analysis showed that MDTHP was adsorbed on the Au-Pt-Pd alloy surface even after acetone cleaning. MDTHP binds not only with Cu but also with Au and Ag, promoting the bond strength of noble metal alloys. The effectiveness of MDTHP on dental noble metal alloys was suggested.

Herein, we report the preparation of mesoporous gold (Au)-silver (Ag) alloy films through the electrochemical micelle assembly process and their applications as microRNA (miRNA) sensors. Following electrochemical deposition and subsequent removal of the templates, the polymeric micelles can create uniformly sized mesoporous architectures with high surface areas. The resulting mesoporous Au-Ag alloy films show high current densities (electrocatalytic activities) towards the redox reaction between potassium ferrocyanide and potassium ferricyanide. Following magnetic isolation and purification, the target miRNA is adsorbed directly on the mesoporous Au-Ag film. Electrochemical detection is then enabled by differential pulse voltammetry (DPV) using the [Fe(CN)6]3-/4- redox system (the faradaic current for the miRNA-adsorbed Au-Ag film decreases compared to the bare film). The films demonstrate great advantages towards miRNA sensing platforms to enhance the detection limit down to attomolar levels of miR-21 (limit of detection (LOD) = 100 aM, s/n = 3). The developed enzymatic amplification-free miniaturized analytical sensor has promising potential for RNA-based diagnosis of diseases.

Biothiols play an important role in living cells and are associated with many diseases. Thus, it is necessary to develop a facile, cost-effective, and convenient analytical method for the detection of biothiols. Nanozymes are functional nanomaterials with enzymatic activities. Due to their unique advantages (e.g., low cost, high stability, and multifunctionality), nanozymes have been extensively used to construct sensing systems. Previous studies demonstrated colorimetric assays for biothiol detection because they could competitively inhibit the peroxidase-like activities of nanozymes. However, few studies were able to differentiate biothiols from each other. To address these challenges, herein, we first synthesized Au alloy nanozymes with better peroxidase-like activities than gold nanoparticles (AuNPs). Then, cross-reactive sensor arrays were constructed with three alloy nanozymes. Six typical biothiols (i.e., glutathione, cysteine, dithiothreitol, mercaptoacetic acid, mercaptoethanol, and mercaptosuccinic acid) were successfully detected and discriminated by the as-prepared nanozyme sensor arrays. Moreover, the practical application of the nanozyme sensor arrays was demonstrated by discriminating biothiols in serum successfully.

Photoluminescent noble metal nanoclusters (NCs, core size <2 nm) have recently emerged as a new type of photosensitizers advantageous over conventional photosensitizers due to their high singlet oxygen ( 1 O 2 ) generation efficiency, excellent photostability and water solubility, as well as good biocompatibility for photodynamic therapy and bioimaging. However, no correlation has been established between the intrinsic 1 O 2 generation and photoluminescence properties of metal NCs with their size, composition, and concentration, which is important to customize the molecule-like properties of NCs for different applications. Herein, we report a systematic study to uncover the rational design of bimetallic NCs with controllable 1 O 2 generation efficiency by tuning their compositions through spontaneous galvanic displacement reaction. A series of ultrasmall gold/silver alloy nanoclusters (AuAgNCs) were synthesized by reacting bovine serum albumin (BSA) protein-protected Ag 13 NCs (13 Ag atoms/cluster) with varying concentrations of gold precursor at room temperature. It was found that the 1 O 2 generation efficiency of the resultant BSA-protected AuAgNCs were inversely correlated to their photoluminescence intensity. Interestingly, plasmonic gold nanoparticles (>10 nm) were also formed simultaneously by photobleaching of the BSA-AuAgNCs, leading to significant metal enhancement effect to the 1 O 2 generation rate much higher (~45 times) than that of the monometallic BSA-Ag 13 NC. This versatile two-for-one strategy to develop next generation metal-enhanced bimetallic NC photosensitizers in one pot opens up new opportunities in designing advanced hybrid nanomaterials with complementary and/or enhanced functionalities., Competing Interests: Declaration of competing interest None., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Detection of host integrated viral oncogenes are critical for early and point-of-care molecular diagnostics of virus-induced carcinoma. However, available diagnostic approaches are incapable of combining both cost-efficient medical diagnosis and high analytical performances. To circumvent this, we have developed an improved IDE-based nanobiosensor for biorecognition of HPV-16 infected cervical cancer cells through electrochemical impedance spectroscopy. The system is fabricated by coating gold (Au) doped zinc oxide (ZnO) nanorods interfaced with HPV-16 viral DNA bioreceptors on top of the Interdigitated Electrode (IDE) chips surface. Due to the concurrently improved sensitivity and biocompatibility of the designed nanohybrid film, Au decorated ZnO-Nanorod biosensors demonstrate exceptional detection of HPV-16 E6 oncogene, the cancer biomarker for HPV infected cervical cancers. This sensor displayed high levels of sensitivity by detecting as low as 1fM of viral E6 gene target. The sensor also exhibited a stable functional life span of more than 5 weeks, good reproducibility and high discriminatory properties against HPV-16. Sensor current responses are obtained from cultured cervical cancer cells which are close to clinical cancer samples. Hence, the developed sensor is an adaptable tool with high potential for clinical diagnosis especially useful for economically challenged countries/regions.

The aim of this study was to investigate the retention forces of secondary telescopic crowns made of polyetherketoneketone (PEKK) in combination with primary crowns made of four different dental alloys and to determine whether the retention forces change in the course of up to 5000 simulated wear cycles. A total of four groups of telescopic crowns were investigated: group 1: 10 primary crowns made of a gold alloy (NEOCAST®3), group 2: 10 primary crowns made of a non-precious metal alloy (Girobond NB), group 3: 10 primary crowns made of zirconium (Cercon®base) and group 4: 10 primary crowns made from PEKK (Pekkton®ivory). The corresponding secondary crowns were made from PEKK in all the four groups. Each pair was fixed axially in a wear simulator specifically designed for the study. Overall, 10,000 joining and separating cycles were performed for each group. To simulate intraoral conditions, a saliva substitute served as a lubricant. Force transducers were used to record the retention forces and after completing 10,000 cycles, the surface of each primary crown was examined using a scanning electron microscope (SEM). All groups showed an increase in the retention force for the first 2000 cycles which stayed constant for the remaining 8000 cycles. The Pekkton®ivory/Pekkton®ivory and NEOCAST®3/Pekkton®ivory combinations displayed mean retention force values of 16 N after a slight increase in the retention force. The Cercon®base/Pekkton®ivory and Girobond NB/Pekkton®ivory combinations displayed an initially high increase in the retention force and then showed a mean retention force of up to 29 N. All primary crowns displayed surface wear. Zirconium primary crowns showed the least wear compared to PEKK and the gold and non-precious metal alloys.

The search for biocompatible nanoparticles with vast applicability has impacted on exploration of various biomaterials for the synthesis of mono and bimetallic nanoparticles. Xylanase is widely regarded as an industrially important enzyme but its potentials in nanotechnological applications are yet to be fully explored. The current study investigates the exploit of xylanases of Aspergillus niger L3 (NE) and Trichoderma longibrachiatum L2 (TE) produced through valorization of corn-cob, to synthesize silver-gold alloy nanoparticles (Ag-AuNPs). Characterization of the Ag-AuNPs involved UV-vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), and field emission scanning electron microscopy and transmission electron microscopy, while their prospective use as antimicrobial, antioxidant, catalytic, anticoagulant, and thrombolytic agents were studied. The biosynthesized Ag-AuNPs were ruby red and light purple with surface plasmon resonance at 520 and 534 nm for NEAg-AuNPs and TEAg-AuNPs, respectively; while FTIR showed that protein molecules capped and stabilized the nanoparticles. The Ag-AuNPs were anisotropic with spherical, oval, and irregular shapes having sizes ranging from 6.98 to 52.51 nm. The nanoparticles appreciably inhibited the growth of tested clinical bacteria (23.40-90.70%) and fungi (70.10-89.05%), and also scavenged 2,2-diphenyl-1-picrylhydrazyl (48.51-53.79%) and hydrogen peroxide (80.5-95.50%). Furthermore, the Ag-AuNPs degraded malachite green (91.39%) and methylene blue (47.10%). Moreover, the Ag-AuNPs displayed outstanding anticoagulant and thrombolytic activities using human blood. This study further emphasizes the significance of xylanases in nanobiotechnology as it has established the potential of xylanases to synthesize Ag-AuNPs, which is being reported for the first time., (© 2019 American Institute of Chemical Engineers.)

The nanomaterial landscape is so vast that a high-throughput combinatorial approach is required to understand structure-function relationships. To address this challenge, an approach for the synthesis and screening of megalibraries of unique nanoscale features (>10,000,000) with tailorable location, size, and composition has been developed. Polymer pen lithography, a parallel lithographic technique, is combined with an ink spray-coating method to create pen arrays, where each pen has a different but deliberately chosen quantity and composition of ink. With this technique, gradients of Au-Cu bimetallic nanoparticles have been synthesized and then screened for activity by in situ Raman spectroscopy with respect to single-walled carbon nanotube (SWNT) growth. Au 3 Cu, a composition not previously known to catalyze SWNT growth, has been identified as the most active composition., Competing Interests: Conflict of interest statement: K.A.B. and C.A.M. have financial interests in TERA-print, LLC, which could potentially benefit from the outcomes of this research. All other authors declare no competing interests.

Introduction: The efficacy of a chemotherapy drug in cancer therapy is highly determined by the ability to control the rate and extent of its release in vivo. However, the lack of techniques to accurately control drug release drastically limits the potency of a chemotherapy drug., Materials and Methods: Here, we present a novel strategy to precisely monitor drug release under magnetic stimulation. Methotrexate (MTX), an anticancer drug, was covalently functionalized onto iron-gold alloy magnetic nanoparticles (Fe-Au alloy nanoparticles or NFAs) through 2-aminoethanethiol grafting and the ability of this drug-nanoparticle conjugate (NFA-MTX) in limiting HepG2 (liver carcinoma) cell growth was studied. Well-dispersed NFAs were prepared through pyrolysis., Results and Discussion: Transmission electron microscopy revealed the average nanoparticle size to be 7.22±2.6 nm, while X-ray diffraction showed distinct 2θ peaks for iron and gold, confirming the presence of iron and gold nanoparticles. Inductively coupled plasma mass spectrometry revealed that the amount of NFA-MTX conjugate ingested by HepG2 cancer cells was 1.5 times higher than that ingested by L929 fibroblasts, thereby proving a higher selective ingestion by cancer cells compared to normal cells. Fourier-transform infrared spectroscopy revealed the breakage of Au-S bonds by the heat generated under magnetic field stimulation to release MTX from the NFA-MTX conjugate, triggering a 95% decrease in cellular viability at 100 µg/mL., Conclusion: The ability of NFA-MTX to dissociate under the influence of an applied magnetic field provides a new strategy to induce cancer cell death via hyperthermia. Applications in drug delivery, drug development, and cancer research are expected., Competing Interests: Disclosure The authors report no conflicts of interest in this work.

Objective: To investigate the longevity and reasons for failure of posterior cast Class II gold inlays and onlays among a group of Norwegian adults. The term inlay was used for both inlays and onlays., Methods: A cohort of 138 patients regularly attending a general practice for check-up were examined in 2016. The patients had a total of 391 posterior gold inlays placed in the period 1970-2015. The inlays were categorized as successful, repaired or failed. Reasons for failure were classified as either "secondary caries", "fractures", "lost inlay" or "other". Participation was voluntary and no compensation was given., Results: The mean age of the patients at placement was 50.8 years (SD: 12.7 yr). Most gold inlays were placed in molars (85.9%) and 14.1% in premolars; 49.4% of the inlays were in the maxilla and the 50.6% in the mandibula. Average length of follow-up was 11.6 years (range: 1-46 years, SD: 7.9); 82.9% were classified as successful, 10.7% as repaired and 6.4% as failed. Reasons for failure were secondary caries (41.3%), lost inlay (25.4%), fractures (23.8%) and other (9.5%). Mean annual failure rate (AFR) was 1.69% for repaired and failed inlays combined. However, if repaired inlays were considered as success, the AFR decreased to 0.57%. Multi-level Cox regression analyses identified low age of the patient and high number of restored surfaces as risk factors for failure., Conclusion: The present retrospective clinical study demonstrated an acceptable annual failure rate for Class II cast gold inlays., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Aim: Herbs are used widely in medicine. The purpose of the present study was to assess the ion release from gold-plated orthodontic bracket compared with other stainless steel brackets, and based on the findings of the study, the orthodontists can choose the most biocompatible brackets and mouthwashes useful in the clinical practice., Materials and Methods: A total of 150 orthodontic brackets from Orthotechnology™ Company, USA (50 stainless steel one-piece brackets, 50 stainless steel two-piece brackets, and 50 gold brackets) were immersed in four mouthwashes in addition to distilled water. Ten of each type of brackets in every media were immersed under 37°C for 45 days. Ions released in these mouthwashes were measured, and comparisons among different bracket types and among various mouthwashes were done by one-way analysis of variance (ANOVA) and then with Games-Howell tests., Results: Increased amounts of ions released in herbal mouth-washes were recorded in gold and two-piece brackets in comparison with one-piece stainless steel brackets., Conclusion: Herbal mouthwashes must be used with caution as they showed an increased amount of ions released in comparison with chlorhexidine. One-piece stainless steel bracket system is the most compatible bracket type, as they released the least amount of ions., Clinical Significance: One-piece stainless steel brackets are better than two-piece brackets in terms of ions released.

Objective: The objective of the study was to investigate the clinical outcome for electroplated telescopic removable dental prostheses (E-RDPs) with zirconia primary crowns., Materials and Methods: Sixty E-RDPs, with primary crowns manufactured from either cobalt-chromium alloy or zirconia, were fabricated for 56 participants. Electroplating was used to produce gold copings directly on the telescopic primary crowns. These copings were bonded intra-orally to the prosthesis framework. After 36 months, prosthesis survival and number of complications were assessed. Statistical analysis was performed by the use of Kaplan-Meier modeling and the log-rank test., Results: Survival of the E-RDPs, 96.4% after 3 years, was identical in both groups. The need for aftercare was high but not significantly different: technical complications were observed for 37% and 42.9% of the prostheses for the zirconia and cobalt-chromium alloy primary crowns, respectively. Fracture of composite veneer was the most frequent complication (59.1%). The incidence of fractured abutment teeth, decementation, and endodontic problems was 7.9% in the zirconia group and 14% in the control group. The majority of abutment-level complications were treated restoratively. A significant difference was found for maximum probing depth at the abutment teeth: In the zirconia group, it decreased by 0.2 mm, whereas it increased by 0.8 mm in the control group (p = 0.04)., Conclusions: After 3 years of observation, survival of zirconia E-RDPs was favorable and comparable with that of established double-crown-retained prostheses. Further studies must clarify whether there are benefits of zirconia primary crowns for periodontal health., Clinical Relevance: Although these results encourage the use of zirconia primary crowns, more research is necessary to reduce the number of complications observed for secondary telescopic crowns, for example, failure of the veneer.

Objectives: The objectives of the present study is to determine the differences in peri-implant soft tissue color with the utilization of titanium, titanium gold-plated, white zirconia, Vita Classical (VC) A4-shaded zirconia, and fluorescent white zirconia abutments and to establish the influence of gingival thickness on the resulting color., Methods: Four implants were contralaterally inserted in 19 fresh pig mandibles, and the color of the peri-implant mucosa with the different abutments was spectrophotometrically measured at 1-, 2-, and 3-mm height from the margin., Results: At 1-mm height, titanium significantly differed from all zirconia abutments in lightness (L*), chroma along red axis (a*), and chroma along yellow-blue axis (b*) parameters. At 2 mm, all zirconia abutments differed from titanium in b* but only fluorescent zirconia in a*. At 3 mm, titanium differed from VC A4-shaded and fluorescent zirconia abutments in b*. At soft tissue thicknesses <1 and 1-2 mm, titanium differed from fluorescent zirconia in a* and b* and from VC A4-shaded zirconia in b*; at thickness >2 mm, no differences were found among abutments. All abutments differed from natural teeth in a* and b* at all heights and thicknesses except for fluorescent zirconia at thickness >2 mm. The Euclidean distance (ΔΕ) differed between titanium abutments and gold, VC A4, and fluorescent zirconia at <1- and 1-2-mm thicknesses., Conclusion: The natural gingival color was not reproduced with any abutment at gingival thicknesses <2 mm. The worst color match was with titanium abutments and the best with fluorescent zirconia, followed by VC A4-shaded zirconia. At gingival thicknesses >2 mm, no differences were detected among abutments., Clinical Relevance: This study demonstrates that the type of abutment and the gingival thickness affect the resulting peri-implant gingival color.

In this work, a novel electrochemical detection platform was established by integrating molecularly imprinting technique with microfluidic chip and applied for trace measurement of three therapeutic drugs. The chip foundation is acrylic panel with designed grooves. In the detection cell of the chip, a Pt wire is used as the counter electrode and reference electrode, and a Au-Ag alloy microwire (NPAMW) with 3D nanoporous surface modified with electro-polymerized molecularly imprinted polymer (MIP) film as the working electrode. Detailed characterization of the chip and the working electrode was performed, and the properties were explored by cyclic voltammetry and electrochemical impedance spectroscopy. Two methods, respectively based on electrochemical catalysis and MIP/gate effect were employed for detecting warfarin sodium by using the prepared chip. The linearity of electrochemical catalysis method was in the range of 5×10 -6 -4×10 -4 M, which fails to meet clinical testing demand. By contrast, the linearity of gate effect was 2×10 -11 -4×10 -9 M with remarkably low detection limit of 8×10 -12 M (S/N=3), which is able to satisfy clinical assay. Then the system was applied for 24-h monitoring of drug concentration in plasma after administration of warfarin sodium in rabbit, and the corresponding pharmacokinetic parameters were obtained. In addition, the microfluidic chip was successfully adopted to analyze cyclophosphamide and carbamazepine, implying its good versatile ability. It is expected that this novel electrochemical microfluidic chip can act as a promising format for point-of-care testing via monitoring different analytes sensitively and conveniently., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The purpose of the current study was to evaluate the bonding performance of two single-liquid primers, which contained 6-(4-vinylbenzyl-n-propyl) amino-1,3,5-triazine-2,4-dithione (VTD) or 6-methacryloyloxyhexyl 2-thiouracil 5-carboxylate (MTU-6), used for bonding between metals and an acrylic resin. A gold alloy and high-purity titanium were used as adherend materials, and a transparent acrylic resin initiated with tri-n-butylborane derivative was selected as the luting material. Both adherends were treated with one of the primers and bonded with the luting material, after which shear bond strength was determined. Fourier transform infrared spectroscopy was used to analyze debonded resin specimens. Shear bond strength to gold alloy was significantly greater than that to titanium for both the VTD and MTU-6 primers. A trace of thiol structure, probably derived from VTD and MTU-6, was detected on resin surfaces debonded from gold alloy. These results indicate that the two organic sulfur compounds, which are stable in an atmospheric environment, are tautomerized into a thiol structure, thus allowing adsorption onto noble metals. In addition, the adsorbed thiol compounds contribute to chemical bonding between the acrylic resin and noble metal alloy, as polymerizable adhesive functional monomers.

A facile and green strategy is reported here to synthesize gold (Au), silver (Ag) and gold-silver (Au-Ag) alloy nanoparticles (NPs) through bio-reduction reactions of aqueous corresponding metal precursors mediated by extracts of aerial parts of R. hypocrateriformis, which act as both reducing and stabilizing agents, under microwave irradiation. UV-vis spectrophotometer, XRD, FT-IR, FESEM/TEM, TGA and EDAX analysis were used to characterize the obtained NPs. The formation of NPs is evident from their surface plasmon resonance peak observed at λ max =∼550, 450 and 500nm for Au, Ag and Au-Ag alloy NPs respectively. XRD pattern revealed that fcc structure, while FT-IR spectra signify the presence of phytochemicals adsorbed on NPs. Such a biofunctionalized NPs were characterized by their weight loss, 30% due to thermal degradation of plant phytochemicals observed in TG analysis. The spherical shape of Au, Ag and Au-Ag alloy NPs (∼10-50nm) is observed by FE-SEM/TEM images. EDAX analysis confirms the expected elemental composition. Moreover, these NPs showed enhanced antimicrobial, antioxidant, and anticancer activities, though it is more pronounced for Au-Ag alloy NPs, which is due to the combining effect of phytochemicals, Au and Ag metals. Thus, the biosynthesized NPs could be applied as effective growth inhibitors for various biomedical applications., (Copyright © 2016 Elsevier Inc. All rights reserved.)

This study investigated the green biosynthesis of gold (Au) and silver-gold alloy (Ag-Au) nanoparticles using cell-free extract of Bacillus safensis LAU 13 strain (GenBank accession No: KJ461434). The biosynthesized AuNPs and Ag-AuNPs were characterized using UV-Vis spectroscopy, Fourier-transform infrared spectroscopy, and transmission electron microscopy. Evaluation of the antifungal activities, degradation of malachite green, anti-coagulation of blood, and thrombolysis of human blood clot by the biosynthesized nanoparticles were investigated. The AuNPs and Ag-AuNPs had maximum absorbance at 561 and 545 nm, respectively. The FTIR peaks at 3318, 2378, 2114, 1998, 1636, 1287, 446, 421 cm -1 for AuNPs; and 3310, 2345, 2203, 2033, 1636, 1273, 502, 453, 424 cm -1 for Ag-AuNPs indicated that proteins were the capping and stabilization molecules in the biosynthesized nanoparticles. The particles were fairly spherical in shape with size of 10-45 nm for AuNPs and 13-80 nm for Ag-AuNPs. Moreover, energy dispersive X-ray analysis of AuNPs revealed gold as the most prominent metal in the AuNPs solution, while silver and gold were the most prominent in the case of Ag-AuNPs. Selected area electron diffraction showed the biosynthesized nanoparticles as crystal structures with ring shape pattern. AuNPs and Ag-AuNPs displayed growth inhibitions of 66.67-90.78% against strains of Aspergillus fumigatus and A. niger at concentration of 200 μg/ml , and remarkable degradation (> 90%) of malachite green after 48 h. Furthermore, the nanoparticles prevented coagulation of blood, and also completely dissolved blood clots, indicating the biomedical potential of AuNPs and Ag-AuNPs in the management of blood coagulation disorders. This is the first report of the synthesis of AuNPs and Ag-AuNPs using a strain of B. safensis for biomedical and catalytic applications.

Purpose: To investigate the clinical usefulness, a customized abutment produced with the Pd-Ag-In alloy was compared with a customized abutment produced with the conventional titanium alloy for discoloration and mechanical accuracy., Materials and Methods: Discoloration and resistance to corrosion of the Pd-Ag-In alloy were evaluated using chemical solutions. Marginal adaptation of internal-type implants and abutments was compared using 10 titanium abutments and 10 Pd-Ag-In abutments using a surface measuring system. A detorque test was performed on 12 implant-abutment complexes of each control and experimental group to investigate screw joint stability. Cyclic loading simulating a human's mastication movement for 1 year was applied after 30 Ncm initial tightening, and the removal torque was measured using a digital torque gauge. The noninferiority test was conducted to compare the Pd-Ag-In alloy with a titanium abutment with a 10% margin., Results: The Pd-Ag-In alloy had a warm yellow color and displayed stable resistance to discoloration and corrosion, resulting in an advantageous esthetic property. When compared to the titanium alloy, it did not show noninferiority with respect to the gap between the implant and the abutment; the gap was approximately 13.3 μm on average, which was not significantly different from those observed in previous studies. After long-term use, it displayed statistically significant noninferiority in the removal torque value compared to the titanium group., Conclusion: The Pd-Ag-In alloy-based customized abutment had good mechanical properties of the implant-abutment complex as well as a superior esthetic property, and can provide favorable outcomes in anterior implant restoration.

Purpose: MRI allows radiation-free imaging of the head and neck area. However, implant-supported prostheses may severely impair image quality due to artefacts. Therefore, identification of preferable material compositions for implants and supported prostheses with little impact on MR image quality is mandatory., Materials and Methods: Overall, one zirconia and four titanium dental implants were provided with different single crown materials: porcelain-fused-to-metal precious alloy (GP-T), porcelain-fused-to-metal non-precious alloy (CCT-T), porcelain-fused-to-zirconia (ZC-T) and monolithic zirconia (Z-T, Z-Z). Three-dimensional artefact volume was determined on a 3 Tesla MRI, applying two standard sequence types (SPACE and TSE). Two-way ANOVA and pair-wise post-hoc Turkey test were performed for comparison of artefact size., Results: Fewest MR artefacts were observed with zirconia implant combined with monolithic zirconia crown. A titanium implant combined with a single crown framework out of the non-precious alloys was unfavourable in terms of artefact volume. Smaller and comparable artefact volumes were noted for titanium implants with the remaining three crown materials (GP-T, ZC-T and Z-T)., Conclusions: Material composition of dental implants provided with single crowns has a profound impact on artefact volume. In comparison with crowns containing cobalt, chromium and tungsten, the MRI artefacts are reduced in precious alloy- and zirconia-based crowns. Further studies are needed to assess whether residual artefacts allow sufficient diagnostic imaging with these crowns. Conflict-of-interest statement: The authors have nothing to disclose.

Purpose: We examined safety issues related to the presence of various metallic dental materials in magnetic resonance (MR) imaging at 7 tesla., Methods: A 7T MR imaging scanner was used to examine 18 kinds of materials, including 8 metals used in dental restorations, 6 osseointegrated dental implants, 2 abutments for dental implants, and 2 magnetic attachment keepers. We assessed translational attraction forces between the static magnetic field and materials via deflection angles read on a tailor-made instrument and compared with those at 3T. Heating effects from radiofrequency during image acquisitions using 6 different sequences were examined by measuring associated temperature changes in agarose-gel phantoms with a fiber-optic thermometer., Results: Deflection angles of the metallic dental materials were significantly larger at 7T than 3T. Among full metal crowns (FMCs), deflection angles were 18.0° for cobalt-chromium (Co-Cr) alloys, 13.5° for nickel-chromium (Ni-Cr) alloys, and 0° for other materials. Deflection angles of the dental implants and abutments were minimal, ranging from 5.0 to 6.5°, whereas the magnetic attachment keepers were strongly attracted to the field, having deflection angles of 90° or more. Increases in temperature of the FMCs were significant but less than 1°C in every sequence. The dental implant of 50-mm length showed significant but mild temperature increases (up to 1.5°C) when compared with other dental implants and abutments, particularly on sequences with high specific absorption rate values., Conclusion: Although most metallic dental materials showed no apparent translational attraction or heating at 7T, substantial attraction forces on the magnetic attachment keepers suggested potential risks to patients and research participants undergoing MR imaging examinations.

Static upper eyelid weight loading is a well known treatment option for patients who suffer from paralytic lagophtalmus. Golden implants may cause some complications such as extrusion, postoperative ptosis, visibility of the implant from the skin, infection, or dislocation. Our patients applied to our clinic with discomfort of the implant's easily noticeable visibility in their daily life. They were scheduled the operation programme for reducing visibility of implant.In operation, capsule formation has seen and dissection begun preserving the capsule formation. The capsule has opened on its cranial edge and implant has been removed. By this maneuver, 2 layers of capsule were dissected from surrounding tissues without separating its caudal edges from the upper tarsal fold. These 2 layers were sutured to each other providing strong fibrous shield with the aim of preventing implant visibility. A new pocket has been created under this fibrous shield.Capsule shield technique is provided to replace the implant and prevent revisibilation by using forceful fibrous and highly vascular 2 layers of capsule. This technique seems 1 step ahead than autogenous grafts that require secondary surgical area and bring donor site complications with itself. It does not contain any risk of developing foreign body response and graft infection, unlikely nonautogenous/autogenous graft materials. Also, in the capsule shield technique, operation duration will be shorter and hospitalization period will be shorter compared with techniques using barrier materials because it does not require any additional surgical intervention in donor area. In addition, the authors keep the apeuneurosis in anatomical position and no other new incisions are required. Since no biomaterials are required, this technique also avoids donor site morbidity.

The aim of the study was to examine changes in physical and mechanical properties of dental alloys depending of the initial composition at re-casting. Russianc precious alloys: Plagodent (AuPtPd) and Palladent (PdAu) and base alloys: Vitiriy-N (NiCrMo) and Vitiriy-C (CoCrMo) were used as study samples, which were divided in three groups: a primary casting from the granules; 50% of re-casting; 100% of re-casting. We investigated the yield strength in bending, coefficient of thermal expansion and hardness. Changing in the composition of the alloys has led to changes of all physical and mechanical properties.

Learning objects (LOs) associated with augmented reality have been used as attractive new technologic tools in the educational process. However, the acceptance of new LOs must be verified with the purpose of using these innovations in the learning process in general. The aim of this study was to develop a new LO and investigate the acceptance of gold onlay in teaching preparation design at a dental school in Brazil. Questionnaires were designed to assess, first, the users' computational ability and knowledge of computers (Q1) and, second, the users' acceptance of the new LO (Q2). For both questionnaires, the internal consistency index was calculated to determine whether the questions were measuring the same construct. The reliability of Q2 was measured with a retest procedure. The LO was tested by dental students (n=28), professors and postgraduate students in dentistry and prosthetics (n=30), and dentists participating in a continuing education or remedial course in dentistry and/or prosthetics (n=19). Analyses of internal consistency (Kappa coefficient and Cronbach's alpha) demonstrated a high degree of confidence in the questionnaires. Tests for simple linear regressions were conducted between the response variable (Q2) and the following explanative variables: the Q1 score, age, gender, and group. The results showed wide acceptance regardless of the subjects' computational ability (p=0.99; R2=0), gender (p=0.27; R2=1.6%), age (p=0.27; R2=0.1%), or group (p=0.53; R2=1.9%). The methodology used enabled the development of an LO with a high index of acceptance for all groups.

Objective: The aim of this in vitro study was to determine the load and deflection at failure of different lingual retainers bonded with composite to enamel in a standardized three-point bending test. The results were rationalized with finite element analysis (FEA) models., Materials and Methods: Four types of multistranded wires, Dead Soft Respond, Twisted ligature, Penta-One, Gold-plated Penta-One, and two glass fibre-reinforced composite retainers, Fibre 07 and Fibre 09, were bonded to enamel with composite and submitted to a three-point bending test. The load and deflection at failure and the mode of debonding were recorded. The stiffness of the wires was determined and all experimental data were used in FEA models to rationalize the observed values and mode of debonding., Results: Significant higher load and deflection were found for the most flexible retainers Twisted ligature and Dead Soft Respond. All retainers failed between the wire and composite, which was confirmed by FEA showing the highest stress in the composite around the retainer. The FEA models showed that the amount of composite used for bonding the retainers should be 2-4mm., Conclusions: Based on the in vitro results, optimal bonding of lingual retainers can be achieved by flexible retainers, bonded with intrinsically strong composites. According to the FEA models the retainer should be bonded with 2-4mm composite, leaving the critical 'free-wire' length for the success of the retainer system., (© The Author 2014. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.)

Widespread use of silver nanoparticles raises questions of environmental and biological impact. Many synthesis approaches are used to produce pure silver and silver-shell gold-core particles optimized for specific applications. Since both nanoparticles and silver dissolved from the particles may impact the biological response, it is important to understand the physicochemical characteristics along with the biological impact of nanoparticles produced by different processes. The authors have examined the structure, dissolution, and impact of particle exposure to macrophage cells of two 20 nm silver particles synthesized in different ways, which have different internal structures. The structures were examined by electron microscopy and dissolution measured in Rosewell Park Memorial Institute media with 10% fetal bovine serum. Cytotoxicity and oxidative stress were used to measure biological impact on RAW 264.7 macrophage cells. The particles were polycrystalline, but 20 nm particles grown on gold seed particles had smaller crystallite size with many high-energy grain boundaries and defects, and an apparent higher solubility than 20 nm pure silver particles. Greater oxidative stress and cytotoxicity were observed for 20 nm particles containing the Au core than for 20 nm pure silver particles. A simple dissolution model described the time variation of particle size and dissolved silver for particle loadings larger than 9 μg/ml for the 24-h period characteristic of many in-vitro studies.

Purpose: Ceramic defects in porcelain-fused-to-metal (PFM) restorations may depend on framework alloy type. This study assessed ceramic defects on cobalt-chromium- (Co-Cr-) and gold-platinum- (Au-Pt-) based PFM restorations., Materials and Methods: In this study, 147 Co-Cr-based and 168 Au-Pt-based PFM restorations inserted between 1998 and 2010 (139 patients) were examined for ceramic defects. Detected defects were assigned to three groups according to clinical defect relevance., Results: Ceramic defect rates (Co-Cr-based: 12.9%; Au-Pt-based: 7.2%) revealed no significant difference but a strong statistical trend (U test, P = .082). Most defects were of little clinical relevance., Conclusions: Co-Cr PFM restorations may be at higher risk for ceramic defects compared to Au-Pt-based restorations.

Statement of Problem: It is unclear which post and core system performs best when bonded to severely compromised endodontically treated teeth., Purpose: The purpose of this study was to investigate the fracture resistance and mode of failure of severely compromised teeth restored with 3 different adhesively bonded post and core systems., Material and Methods: Thirty extracted endodontically treated maxillary anterior teeth were randomly divided into 3 groups, CPC, gold cast post and core; TPC, titanium prefabricated post/composite resin core; and FPC, quartz fiber reinforced post/composite resin core. All posts were adhesively cemented. All cores resembled a central incisor preparation with no remaining tooth structure above the finish line. Cast gold crowns were fabricated and cemented adhesively. The specimens were aged with thermocycling and cyclic loading. Two specimens per group were randomly selected for micro-computed tomographic imaging before and after aging. Failure was induced with a universal testing machine. The mode of failure was characterized by the interface separation. Data were analyzed with 1-way ANOVA (α=.05) followed by post hoc tests (Bonferroni)., Results: A statistically significant difference was found among the 3 groups (P=.002). CPC was significantly different than TPC (P=.008) or FPC (P=.003). The primary mode of failure for CPC and TPC was root fracture, and for FPC post debonding., Conclusions: Severely compromised endodontically treated teeth restored with bonded gold cast post and cores showed significantly higher fracture resistance., (Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

The catalytic reduction of methylene blue was studied using biosynthesised gold-silver (Au-Ag) alloy nanoparticles (NPs). The fungal biomass of Trichoderma harzianum was used as a reducing and stabilising agent in the synthesis of Au-Ag alloy NPs. The synthesised NPs were well characterised by UV-vis spectroscopy, dynamic light scattering, X-ray diffraction, transmission electron microscopy, energy dispersive X-ray spectroscopy and Fourier transform infrared spectroscopy. The plausible synthesis mechanism involved in the formation of Au-Ag alloy NPs was also discussed with diagrammatic representation. A series of experiments was performed to investigate the catalytic activity of the as-prepared Au-Ag alloy NPs and found that the alloy NPs show excellent catalytic activity.

Statement of Problem: Failure of the bond between metal and ceramic is common with metal ceramic prostheses., Purpose: The purpose of this in vitro study was to investigate how recasting affects the metal-ceramic bond strength for 1 base metal and 1 noble alloy compared with laser-sintered Co-Cr alloy by using a procedure based on ANSI/ADA Specification No. 38., Material and Methods: One laser-sintered (Co-Cr) and 2 metal (Co-Cr, Pd-Ag) alloys were used. Metal strips (25 × 3 × 0.5 mm) were obtained with 2 different methods: torch melting and laser sintering. Twelve alloy specimens were processed for each group. Vita VM13 porcelain layers (8 × 3 × 1.1 mm) were fabricated at the centers of the metal frameworks. Specimens containing 100% fresh alloy were used in the first casting group (control). Metal ceramic specimens were prepared for each alloy, and no new metal was added to the second and third castings. The findings were statistically analyzed and compared with a 2-way analysis of variance (ANOVA)., Results: The second casting of the noble alloy-ceramic specimen had the highest mean metal-ceramic bond strength in flexure. No significant differences were found between the laser-sintered Co-Cr and the Pd-Ag metal ceramic specimens after the first and third castings., Conclusion: All groups had adequate porcelain bond strength, except C2 (second casting of Co-Cr alloy) and C3 (third casting of Co-Cr alloy). Co-Cr alloy fabricated with new laser-sintering techniques is a promising alternative for metal ceramic restorations. Further research is needed before its use can be advocated in the dental laboratory., (Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

This case report demonstrates a novel treatment approach to deal with a severely rotated and impacted upper central incisor in an adolescent patient. A precision custom-made gold attachment was fabricated from a prototype using cone beam computerized tomograph (CBCT) scan data and then used to align and de-rotate the impacted central incisor.

Introduction: In daily orthodontic clinical practice retention is very important, and lingual retainers are part of this challenge. The failure of lingual retainers may be due to many factors. The aim of this study was to assess the retention forces and mechanical behavior of different types of wires matched with different kinds of composites in lingual retainers., Methods: A tensile test was performed on cylindrical composite test specimens bonded to orthodontic wires. The specimens were constructed using four different wires: a straight wire (Remanium .016×.022″ Dentaurum), two round twisted wires (Penta One .0215″ Masel, Gold Penta Twisted .0215″ Gold N'braces) and a rectangular braided wire (D-Rect .016×.022″ Ormco); and three composites: two micro-hybrids (Micro-Hybrid Enamel Plus HFO Micerium, and Micro-Hybrid SDR U Dentsply) and a micro-nano-filled composite (Micro-Nano-Filled Transbond LR 3M). The test was performed at a speed of 10mm/min on an Inström device. The wire was fixed with a clamp., Results: The results showed that the bonding between wires and composites in lingual fixed retainers seemed to be lowest for rectangular smooth wires and increased in round twisted and rectangular twisted wires where the bonding was so strong that the maximum tension/bond strength was greater than the ultimate tensile strength of the wire. The highest values were in rectangular twisted wires. Concerning the composites, hybrid composites had the lowest interface bonding values and broke very quickly, while the nano- and micro-composites tolerated stronger forces and displayed higher bonding values. The best results were observed with the golden twisted wire and reached 21.46 MPa with the Transbond composite. With the rectangular braided wire the retention forces were so high that the Enamel Plus composite fractured when the load exceeded 154.6 N/MPa. When the same wire was combined with the Transbond LR either the wire or the composite broke when the force exceeded 240 N., Conclusions: The results of this study show that, when selecting a lingual retainer in daily clinical practice, not only must the patient's compliance and dependability be considered but also the mechanical properties and composition of different combinations of composites and wires., (Copyright © 2015 CEO. Published by Elsevier Masson SAS. All rights reserved.)

Cemented crowns are increasingly being used on dental implants instead of on screw-retained prostheses because of the reliability of internal Morse taper implant-abutment connections. However, there is a lack of information on the fit of metal ceramic and premachined alumina infrastructures. Therefore, the aim of this study was to evaluate the marginal and internal fits of different metal and alumina infrastructures cemented on universal post abutments. A total of 45 abutments (6 mm in height and 3.3 mm in diameter) were divided into five groups on the basis of their infrastructure material: cobalt-chromium (CoCr), nickel-chromium (NiCr), nickel-chromium-molybdenum-titanium (NiCrMoTi), gold (Au), and premachined alumina. The alumina group showed marginal overextension, and the Au group showed the highest discrepancy in marginal fit among the metal alloys. The CoCr and alumina groups showed the lowest discrepancies in internal fit. In conclusion, the alumina cylinders exhibited the best internal fit, despite their horizontal overextension. Among the metal alloys, CoCr exhibited the best fit at critical regions, such as the cervical and occlusal areas., (© 2015 Eur J Oral Sci.)

Statement of Problem: Implants in posterior regions of the jaw require short dental implants with long crown heights, leading to increased crown-to-implant ratios and mechanical stress. This can lead to fracture and screw loosening., Purpose: The purpose of this study was to investigate the dynamic nature and behavior of prosthetic components and preimplant bone and evaluate the effect of increased crown height space (CHS) and crown-to-implant ratio on stress concentrations under external oblique forces., Material and Methods: The severely resorbed bone of a posterior mandible site was modeled with Mimics and Catia software. A second mandibular premolar tooth was modeled with CHS values of 8.8, 11.2, 13.6, and 16 mm. A Straumann implant (4.1×8 mm), a directly attached crown, and an abutment screw were modeled with geometric data and designed by using SolidWorks software. Abaqus software was used for the dynamic simulation of screw tightening and the application of an external load to the buccal cusp at a 75.8-degree angle with the occlusal plane. The distribution of screw load and member load at each step was compared, and the stress values were calculated within the dental implant complex and surrounding bone., Results: During tightening, the magnitude and distribution of the preload and clamp load were uniform and equal at the cross section of all CHSs. Under an external load, the screw load decreased and member load increased. An increase in the CHS caused the corresponding distribution to become more nonuniform and increased the maximum compressive and tensile stresses in the preimplant bone. Additionally, the von Mises stress decreased at the abutment screw and increased at the abutment and fixture., Conclusions: Under nonaxial forces, increased CHS does not influence the decrease in screw load or increase in member load. However, it contributes to screw loosening and fatigue fracture by skewing the stress distribution to the transverse section of the implant., (Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Statement of Problem: Selective laser melting (SLM) technology has been introduced to fabricate dental restorations. However, the fit of these restorations still needs further study., Purpose: The purpose of this in vivo investigation was to compare the marginal and internal fit of SLM metal ceramic crowns with 2 lost-wax cast metal ceramic crowns and to evaluate the influence of tooth type on the marginal and internal fit of these crowns., Material and Methods: A total of 330 metal ceramic crowns were evaluated. The metal copings were fabricated with SLM Co-Cr, cast Au-Pt, and cast Co-Cr alloy (n=110). The marginal and internal gaps of crowns were recorded by using a replica technique. The anterior and premolar replicas were sectioned 2 times, and molar replicas were sectioned 4 times. The marginal and internal gap width of each cross section was examined by stereomicroscope at ×30 magnification. Two-way analysis of variance was performed to identify the statistical difference among the groups., Results: The marginal fit of the SLM Co-Cr group (75.6 ±32.6 μm) was not different from the cast Au-Pt group (76.8 ±32.1 μm) (P>.05) but was better than the cast Co-Cr group (91.0 ±36.3 μm) (P<.01). No significant difference was found among the SLM Co-Cr group (127.3 ±45.8 μm), cast Au-Pt group (129.9 ±61.1 μm). and cast Co-Cr group (142.5 ±63.7 μm) (P>.05). The mean occlusal gap width of the SLM Co-Cr group (309.8 ±106.6 μm) was significantly higher than that of the cast Au-Pt group (254.6 ±109.6 μm) and the cast Co-Cr group (249.6 ±110.4 μm) (P<.005). No significant difference was found in the marginal fit among the anterior group (84.4 ±35.1 μm), the premolar group (80.6 ±26.3 μm), and the molar group (82.7 ±38.0 μm) (P>.05). Also, no significant difference was found in the axial fit among the anterior group (138.3 ±52.5 μm), the premolar group (132.9 ±50.4 μm), and the molar group (134.4 ±52.5 μm) (P>.05). The anterior group (267.6 ±110.2 μm) did not differ from the premolar group (270.2 ±112.8 μm) and the molar group (268.6 ±110.5 μm) in occlusal fit (P>.05)., Conclusions: The marginal fit of SLM Co-Cr metal ceramic crowns was similar to that of the cast Au-Pt metal ceramic crowns and was better than that of the cast Co-Cr metal ceramic crowns. The SLM Co-Cr metal ceramic crowns were not significantly different from the 2 cast metal ceramic crowns in axial fit but were less accurate in occlusal fit. Tooth type did not influence the marginal and internal fit of the metal ceramic crowns., (Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

The substrate chain of double-stranded DNA (dsDNA) could be specifically cleaved by Pb(2+) to release single-stranded DNA (ssDNA) that adsorbs onto the AuPd nanoalloy (AuPdNP) to form a stable AuPdNP-ssDNA complex, but the dsDNA can not protect AuPdNPs in large AuPdNP aggregates (AuPdNPA) under the action of NaCl. AuPdNP-ssDNA and large AuPdNPA could be separated by centrifugation. On increasing the concentration of Pb(2+) , the amount of released ssDNA increased; AuPdNP-ssDNA increased in the centrifugation solution exhibiting a catalytic effect on the slow reaction of rhodamine 6G (Rh6G) and NaH2 PO2 , which led to fluorescence quenching at 552 nm. The decrease in fluorescence intensity (ΔF) was linear to the concentration of Pb(2+) within the range 0.33-8.00 nmol/L, with a detection limit of 0.21 nmol/L. The proposed method was applied to detect Pb(2+) in water samples, with satisfactory results., (Copyright © 2014 John Wiley & Sons, Ltd.)

Statement of Problem: A fundamental problem in fully understanding the dynamic nature of screw loosening is lack of recognition of the entire process of screw tightening and retightening., Purpose: The purpose of this study was to explain the dynamic nature of abutment screw retightening by using finite element methods to investigate the effect of the coefficient of friction and retightening on the settling effect., Material and Methods: Precise computer models were designed of a Straumann dental implant, a directly attached crown, an abutment screw, and the bone surrounding the implant. All threaded interfaces were designed with a spiral thread helix with a specific coefficient of static and kinetic friction, and the surfaces were characterized as fine, regular, and rough. Abaqus software was used for dynamic simulation, which involved applying rotational displacement to the abutment screw and torque controlling during the steps of tightening, relaxation, retightening, and second relaxation and at different coefficients of friction. The obtained torque and preload values were compared to the predicted values., Results: When surfaces changed from fine to rough, the remaining torque and preload decreased, and the settling effect increased. Upon retightening, the remaining torque and preload increased, and the settling effect also decreased., Conclusions: The reduction of the coefficient of friction contributes to increases in the preload and decreases in the settling effect. Retightening reduced the settling effect and had an insignificant effect on the preload. At high coefficients of friction, the retightening effect was intensified., (Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Introduction: Orthodontists are often asked to remove fixed retainers before magnetic resonance imaging (MRI). This study was undertaken to assess the effects of 2 commonly used fixed retainers on MRI distortion and whether they should be removed., Methods: MRI scans were performed on a dry skull with Twistflex (Dentaurum, Ispringen, Germany) and Ortho Flex Tech (Reliance Orthodontic Products, Itasca, Ill) retainers. Two neuroradiologists independently ranked the distortions. The influence of the fixed retainers' alloys, their distance to the area of diagnosis, location, strength of the magnetic field, and the spin-echo sequence were examined. Statistical analysis included kappa and Pearson chi-square tests., Results: Ortho Flex Tech retainers caused no distortion. Twistflex retainers caused distortion in 46% of the tests in areas close to the retainer (tongue and jaws). Maxillary fixed retainers and the combination of maxillary and mandibular fixed retainers further increased the distortion. Greater distortion was observed with 3-T magnetic fields and T1-weighted spin-echo sequences., Conclusions: Removal of the Ortho Flex Tech retainer is unnecessary before MRI. Removal of the Twistflex should be considered if the MRI scans are performed to diagnose areas close to the fixed retainers, when 3-T magnetic fields and T1-weighted sequences are used, and when both maxillary and mandibular fixed retainers are present., (Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Objective: Evaluate the stress distribution on the peri-implant bone tissue and prosthetic components of bar-clip retaining systems for overdentures presenting different implant inclinations, vertical misfit and framework material., Materials and Methods: Three-dimensional models of a jaw and an overdenture retained by two implants and a bar-clip attachment were modeled using specific software (SolidWorks 2010). The studied variables were: latero-lateral inclination of one implant (-10°, -5°, 0°, +5°, +10°); vertical misfit on the other implant (50, 100, 200 µm); and framework material (Au type IV, Ag-Pd, Ti cp, Co-Cr). Solid models were imported into mechanical simulation software (ANSYS Workbench 11). All nodes on the bone's external surface were constrained and a displacement was applied to simulate the settling of the framework on the ill-fitted component. Von Mises stress for the prosthetic components and maximum principal stress to the bone tissue were evaluated., Results: The +10° inclination presented the worst biomechanical behavior, promoting the highest stress values on the bar framework and peri-implant bone tissue. The -5° group presented the lowest stress values on the prosthetic components and the lowest stress value on peri-implant bone tissue was observed in -10°. Increased vertical misfit caused an increase on the stress values in all evaluated structures. Stiffer framework materials caused a considerable stress increase in the framework itself, prosthetic screw of the fitted component and peri-implant bone tissue., Conclusions: Inclination of one implant associated with vertical misfit caused a relevant effect on the stress distribution in bar-clip retained overdentures. Different framework materials promoted increased levels of stress in all the evaluated structures.

The aim the work was to investigate the effect of varying degrees of luting cement thickness on the strain of the cemented gold alloy crowns under compression. Five dies with their corresponding crowns were fabricated using a lost wax technique. Three gold crowns for each die were fabricated under the control of specific die spacer layers to provide a space of 40 µm (10 layers of die-spacer thickness) and 80 µm (20 layers of die-spacer thickness). The crowns were subsequently cemented using zinc phosphate cement. The crowns were subjected to gradual static compressive loading between 10N to 250N (Newton) and the strain measured simultaneously. The results were statistically analysed using Independent t-test for the different die-spacer thickness at the 95% confidence interval (p = 0.05). It was found that a significant relationship in the three thicknesses. It was concluded that the absence of die-spacer significantly reduced strain response, whereas a very little change in the strain recorded as the die spacer layers has increased. Clinically, decreasing the number of die-spacer layers is advantageous as it provides a lower strain response under static compressive loading that would improve the longevity of the cemented full crowns inside the patient's mouth.

Objective: Dental alloys containing indium (In) have been used in dental restoration for two decades; however, no study has investigated the biological effects of In ions, which may be released in the oral cavity, on human oral keratinocytes. The objective of the present study was to investigate the biological effects of In ions on human oral keratinocyte after confirming their release from a silver-palladium-gold-indium (Ag-Pd-Au-In) dental alloy., Methods: As a corrosion assay, a static immersion tests were performed by detecting the released ions in the corrosion solution from the Ag-Pd-Au-In dental alloy using inductively coupled plasma atomic emission spectroscopy. The cytotoxicity and biological effects of In ions were then studied with In compounds in three human oral keratinocyte cell lines: immortalized human oral keratinocyte (IHOK), HSC-2, and SCC-15., Results: Higher concentrations of In and Cu ions were detected in Ag-Pd-Au-In (P<0.05) than in Ag-Pd-Au, and AgCl deposition occurred on the surface of Ag-Pd-Au-In after a 7-day corrosion test due to its low corrosion resistance. At high concentrations, In ions induced cytotoxicity; however, at low concentrations (∼0.8In(3+)mM), terminal differentiation was observed in human oral keratinocytes. Intracellular ROS was revealed to be a key component of In-induced terminal differentiation., Significance: In ions were released from dental alloys containing In, and high concentrations of In ions resulted in cytotoxicity, whereas low concentrations induced the terminal differentiation of human oral keratinocytes via increased intracellular ROS. Therefore, dental alloys containing In must be biologically evaluated for their safe use., (Copyright © 2014 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.)