Search

Recombinant adeno-associated viral vectors (rAAVs) have become an industry-standard technology in the field of gene therapy, but there are still challenges to be addressed in their biomanufacturing. One of the biggest challenges is the removal of capsid species other than that which contains the gene of interest. In this work, we develop a mechanistic model for the removal of empty capsids-those that contain no genetic material-and enrichment of full rAAV using anion-exchange membrane chromatography. The mechanistic model was calibrated using linear gradient experiments, resulting in good agreement with the experimental data. The model was then applied to optimize the purification process through maximization of yield studying the impact of mobile phase salt concentration and pH, isocratic wash and elution length, flow rate, percent full (purity) requirement, loading density (challenge), and the use of single-step or two-step elution modes. A solution from the optimization with purity of 90% and recovery yield of 84% was selected and successfully validated, as the model could predict the recovery yield with remarkable fidelity and was able to find process conditions that led to significant enrichment. This is, to the best of our knowledge, the first case study of the application of de novo mechanistic modeling for the enrichment of full capsids in rAAV manufacturing, and it serves as demonstration of the potential of mechanistic modeling in rAAV process development., (© 2023 The Authors. Biotechnology and Bioengineering published by Wiley Periodicals LLC.)

The implementation of continuous processing in the biopharmaceutical industry is hindered by the scarcity of process analytical technologies (PAT). To monitor and control a continuous process, PAT tools will be crucial to measure real-time product quality attributes such as protein aggregation. Miniaturizing these analytical techniques can increase measurement speed and enable faster decision-making. A fluorescent dye (FD)-based miniaturized sensor has previously been developed: a zigzag microchannel which mixes two streams under 30 s. Bis-ANS and CCVJ, two established FDs, were employed in this micromixer to detect aggregation of the biopharmaceutical monoclonal antibody (mAb). Both FDs were able to robustly detect aggregation levels starting at 2.5%. However, the real-time measurement provided by the microfluidic sensor still needs to be implemented and assessed in an integrated continuous downstream process. In this work, the micromixer is implemented in a lab-scale integrated system for the purification of mAbs, established in an ÄKTA™ unit. A viral inactivation and two polishing steps were reproduced, sending a sample of the product pool after each phase directly to the microfluidic sensor for aggregate detection. An additional UV sensor was connected after the micromixer and an increase in its signal would indicate that aggregates were present in the sample. The at-line miniaturized PAT tool provides a fast aggregation measurement, under 10 min, enabling better process understanding and control., (© 2023 The Authors. Biotechnology and Bioengineering published by Wiley Periodicals LLC.)

Development of integrated, continuous biomanufacturing (ICB) processes brings along the challenge of streamlining the acquisition of data that can be used for process monitoring, product quality testing and process control. Manually performing sample acquisition, preparation, and analysis during process and product development on ICB platforms requires time and labor that diverts attention from the development itself. It also introduces variability in terms of human error in the handling of samples. To address this, a platform for automatic sampling, sample preparation and analysis for use in small-scale biopharmaceutical downstream processes was developed. The automatic quality analysis system (QAS) consisted of an ÄKTA Explorer chromatography system for sample retrieval, storage, and preparation, as well as an Agilent 1260 Infinity II analytical HPLC system for analysis. The ÄKTA Explorer system was fitted with a superloop in which samples could be stored, conditioned, and diluted before being sent to the injection loop of the Agilent system. The Python-based software Orbit, developed at the department of chemical engineering at Lund university, was used to control and create a communication framework for the systems. To demonstrate the QAS in action, a continuous capture chromatography process utilizing periodic counter-current chromatography was set up on an ÄKTA Pure chromatography system to purify the clarified harvest from a bioreactor for monoclonal antibody production. The QAS was connected to the process to collect two types of samples: 1) the bioreactor supernatant and 2) the product pool from the capture chromatography. Once collected, the samples were conditioned and diluted in the superloop before being sent to the Agilent system, where both aggregate content and charge variant composition were determined using size-exclusion and ion-exchange chromatography, respectively. The QAS was successfully implemented during a continuous run of the capture process, enabling the acquisition of process data with consistent quality and without human intervention, clearing the path for automated process monitoring and data-based control., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier B.V. All rights reserved.)

Buffer management for biopharmaceutical purification processes include buffer preparation, storage of buffers and restocking the buffers when needed. This is usually performed manually by the operators for small scale operations. However, buffer management can become a bottleneck when running integrated continuous purification processes for prolonged times, even at small scale. To address this issue, a buffer management system for the application in continuous lab-scale bioprocessing is presented in this paper. For this purpose, an ÄKTA™ explorer chromatography system was reconfigured to perform the buffer formulation. The system formulated all buffers from stock solutions and water according to pre-specified recipes. A digital twin of the physical system was introduced in the research software Orbit, written in python. Orbit was also used for full automation and control of the buffer system, which could run independently without operator input and handle buffer management for one or several connected buffer-consuming purification systems. The developed buffer management system performed automatic monitoring of buffer volumes, buffer order handling as well as buffer preparation and delivery. To demonstrate the capability of the developed system, it was integrated with a continuous downstream process and supplied all 9 required buffers to the process equipment during a 10-day operation. The buffer management system processed 55 orders and delivered 38 L of buffers, corresponding to 20% of its capacity. The pH and conductivity profiles observed during the purification steps were consistent across the cycles. The deviation in conductivity and pH from the measured average value was within ±0.89% in conductivity and ±0.045 in pH, well within the typical specification for buffer release, indicating that the prepared buffers had the correct composition. The operation of the developed buffer management system was robust and fully automated, and provides one solution to the buffer management bottleneck on lab scale for integrated continuous downstream bioprocessing., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier B.V. All rights reserved.)

In this study, we demonstrated the first, to our knowledge, integrated continuous bioprocess (ICB) designed for the production of acid-sensitive monoclonal antibodies, prone to aggregate at low pH, on pilot scale. A high cell density perfusion culture, stably maintained at 100 × 10 6  cells/ml, was integrated with the downstream process, consisting of a capture step with the recently developed Protein A ligand, Z Ca ; a solvent/detergent-based virus inactivation; and two ion-exchange chromatography steps. The use of a mild pH in the downstream process makes this ICB suitable for the purification of acid-sensitive monoclonal antibodies. Integration and automation of the downstream process were achieved using the Orbit software, and the same equipment and control system were used in initial small-scale trials and the pilot-scale downstream process. High recovery yields of around 90% and a productivity close to 1 g purified antibody/L/day were achieved, with a stable glycosylation pattern and efficient removal of impurities, such as host cell proteins and DNA. Finally, negligible levels of antibody aggregates were detected owing to the mild conditions used throughout the process. The present work paves the way for future industrial-scale integrated continuous biomanufacturing of all types of antibodies, regardless of acid stability., (© 2022 The Authors. Biotechnology and Bioengineering published by Wiley Periodicals LLC.)

Monoclonal antibodies (mAb) are used as therapeutics and for diagnostics of a variety of diseases, and novel antibodies are continuously being developed to find treatments for new diseases. Therefore, the manufacturing process must accommodate a range of mAb characteristics. Acid-sensitive mAbs can severely compromise product purity and yield in the purification process due to the potential formation of aggregates. To address this problem, we have developed an integrated downstream process for the purification of pH-sensitive mAbs at mild conditions. A calcium-dependent Protein A-based ligand, called Z Ca , was used in the capture step in a 3-column periodic counter-current chromatography operation. The binding of Z Ca to antibodies is regulated by calcium, meaning that acidic conditions are not needed to break the interaction and elute the antibodies. Further, the virus inactivation was achieved by a solvent/detergent method, where the pH could remain unchanged. The polishing steps included a cation and an anion exchange chromatography step, and screening of the capture and polishing steps was performed to allow for a seamless integration of the process steps. The process was implemented at laboratory scale for 9 days obtaining a high yield, and a consistently pure drug substance, including high reduction values of the host cell protein and DNA concentrations, as well as aggregate levels below the detection limit, which is attributed to the mild conditions used in the process., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: SH has filed a patent application regarding the novel Z(Ca) domain., (Copyright © 2022. Published by Elsevier B.V.)

Integrated continuous downstream processes with process analytical technology offer a promising opportunity to reduce production costs and increase process flexibility and adaptability. In this case study, an integrated continuous process was used to purify a recombinant protein on laboratory scale in a two-system setup that can be used as a general downstream setup offering multiproduct and multipurpose manufacturing capabilities. The process consisted of continuous solvent/detergent virus inactivation followed by periodic countercurrent chromatography in the capture step, and a final chromatographic polishing step. A real-time controller was implemented to ensure stable operation by adapting the downstream process to external changes. A concentration disturbance was introduced to test the controller. After the disturbance was applied, the product output recovered within 6 h, showing the effectiveness of the controller. In a comparison of the process with and without the controller, the product output per cycle increased by 27%, the resin utilization increased from 71.4% to 87.9%, and the specific buffer consumption was decreased by 21% with the controller, while maintaining a similar yield and purity as in the process without the disturbance. In addition, the integrated continuous process outperformed the batch process, increasing the productivity by 95% and the yield by 28%., (© 2021 The Authors. Biotechnology and Bioengineering published by Wiley Periodicals LLC.)

In this paper, we determined the optimal flow rate trajectory during the loading phase of a mAb capture column. For this purpose, a multi-objective function was used, consisting of productivity and resin utilization. Several general types of trajectories were considered, and the optimal Pareto points were obtained for all of them. In particular, the presented trajectories include a constant-flow loading process as a nominal approach, a stepwise trajectory, and a linear trajectory. Selected trajectories were then applied in experiments with the state-of-the-art protein A resin mAb Select PrismA TM , running in batch mode on a standard single-column chromatography setup, and using both a purified mAb solution as well as a clarified supernatant. The results show that this simple approach, programming the volumetric flow rate according to either of the explored strategies, can improve the process economics by increasing productivity by up to 12% and resin utilization by up to 9% compared to a constant-flow process, while obtaining a yield higher than 99%. The productivity values were similar to the ones obtained in a multi-column continuous process, and ranged from 0.23 to 0.35 mg/min/mL resin. Additionally, it is shown that a model calibration carried out at constant flow can be applied in the simulation and optimization of flow trajectories. The selected processes were scaled up to pilot scale and simulated to prove that even higher productivity and resin utilization can be achieved at larger scales, and therefore confirm that the trajectories are generalizable across process scales for this resin., Competing Interests: Declaration of Competing Interest The authors declare that they have no conflict of interest., (Copyright © 2020. Published by Elsevier B.V.)

A continuous integrated bioprocess available from the earliest stages of process development allows for an easier, more efficient and faster development and characterization of an integrated process as well as production of small-scale drug candidates. The process presented in this article is a proof-of-concept of a continuous end-to-end monoclonal antibody production platform at a very small scale based on a 200 ml alternating tangential flow filtration perfusion bioreactor, integrated with the purification process with a model-based design and control. The downstream process, consisting of a periodic twin-column protein A capture, a virus inactivation, a CEX column and an AEX column, was compactly implemented in a single chromatography system, with a purification time of less than 4 hr. Monoclonal antibodies were produced for 17 days in a high cell density perfusion culture of CHO cells with titers up to 1.0 mg/ml. A digital twin of the downstream process was created by modelling all the chromatography steps. These models were used for real-time decision making by the implementation of control strategies to automatize and optimize the operation of the process. A consistent glycosylation pattern of the purified product was ensured by the steady state operation of the process. Regarding the removal of impurities, at least a 4-log reduction in the HCP levels was achieved. The recovery yield was up to 60%, and a maximum productivity of 0.8 mg/ml/day of purified product was obtained., (© 2020 The Authors. Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers.)

An optimization study of an integrated periodic counter-current chromatography (PCC) process in a monoclonal antibody (mAb) downstream process at lab scale, is presented in this paper. The optimization was based on a mechanistic model of the breakthrough curve in the protein-A capture step. Productivity and resin utilization were the objective functions, while yield during the loading of the capture column was set as a constraint. Different integration approaches were considered, and the effect of the feed concentration, yield and the protein-A resin was studied. The breakthrough curve and the length of the product recovery, which depended on the integration approach, determined the process scheduling. Several optimal Pareto solutions were obtained. At 0.5 mg mL -1 and 99% yield, a maximum productivity of 0.38 mg mL -1  min -1 with a resin utilization of 60% was obtained. On the other hand, the maximum resin utilization was 95% with a productivity of 0.10 mg mL -1  min -1 . Due to the constraint of the process scheduling, a lower productivity could be achieved in the integration approaches with higher recovery time, which was more remarkable at higher concentrations. Therefore, it was shown that a holistic approach, where all the purification steps are considered in the process optimization, is needed to design a PCC in a downstream process., Competing Interests: Declaration Competing of Interest The authors declare no commercial or financial conflict of interest., (Copyright © 2020 The Authors. Published by Elsevier B.V. All rights reserved.)

In this work, an automated downstream process for the purification and formulation of a recombinant protein was integrated at lab scale in a single chromatography unit. The purification chain consists of three bind-and-elute chromatography columns, a flow-through membrane chromatography step, and a final ultrafiltration-diafiltration (UFDF) step to concentrate and formulate the sample. An integrated downstream process increases productivity and decreases process time and hold-up volume. In addition, the automation of the process allows reducing the manual work and increases reproducibility. To integrate the downstream steps, all the intermediate tanks are removed, and the eluate of a column is loaded directly onto the next one. This makes it necessary to design the process in order to minimize the column volumes and the process time. A research software called Orbit was used to automate the purification process and implement a UFDF step in the chromatography unit. The whole downstream sequence was successfully implemented at lab scale, getting a pure concentrated and formulated product with a productivity of 1.09 mg mL -1  h -1 , achieving a time reduction from almost two to one working day, while getting a similar yield and purity. Regarding the UFDF operation, the sample was concentrated 10 times, and 97% of the old buffer was exchanged by the formulation buffer with a sequential diafiltration., (Copyright © 2019 Elsevier B.V. All rights reserved.)