Search

A new, efficient, algorithmic approach to create illumination configurations for laser driven high energy density physics experiments is proposed. The method is applied to a polar direct drive solid target experiment at the National Ignition Facility (NIF), where it is simulated to create more than x2 higher peak pressure and x1.4 higher density by maintaining better shock uniformity. The analysis is focused on projecting shocks into solid targets at the NIF, but with minor adaptations the method could be applied to implosions, other target geometries and other facilities.

The theory of temperature jets gets extended to account for the influence of the beta effect on their dynamics. Including this effect noticeably changes symmetry properties and laws of conservation inherent to models without the beta effect. Especially nontrivial, the dynamics of jets become near the equator, where the model admits multi-valued solutions that look like jets crossing the equator. For example, the so-called loop solitons moving along the equator with velocities inversely proportional to the cube of their amplitude turn out among them. Estimates based on simple qualitative considerations show that, owing to the beta effect, the temperature jets can form a specific equatorial turbulence, in which they play the role of structural elements. Notably, the spectral slope of the energy density at large wave numbers in such turbulence becomes equal to unity.

The recent image of our galaxy's supermassive black hole Sgr A* derived from the 7 April 2017 data of the Event Horizon Telescope Collaboration shows multiple hot spots in its accretion disk. Using the analytical framework, we demonstrate that the observed hot spots may not be disjoint elements but causally linked components ("petals") of one rotating quasi-stationary macro-structure formed in the thermo-vorticial field within the accretion disk., Comment: 15 pages, 5 figures

The design of inertial confinement fusion (ICF) ignition targets requires radiation-hydrodynamics simulations with accurate models of the fundamental material properties (i.e., equation of state, opacity, and conductivity). Validation of these models are required via experimentation. A feasibility study of using spatially-integrated, spectrally-resolved, X-ray Thomson scattering (XRTS) measurements to diagnose the temperature, density, and ionization of the compressed DT shell and hot spot of a laser direct-drive implosion at two-thirds convergence was conducted. Synthetic scattering spectra were generated using 1-D implosion simulations from the LILAC code that were post processed with the X-ray Scattering (XRS) model which is incorporated within SPECT3D. Analysis of two extreme adiabat capsule conditions showed that the plasma conditions for both compressed DT shells could be resolved., Comment: 11 pages, 8 figures

A single-layer model is used to construct the theory of straight-line jets. In addition to stationary states, the evolution of such jets admits transverse pulsations. The theory predicts that the period for warm jets pulsations is longer than the period of inertial oscillations caused by the Earth's rotation, while for cold jets pulsations, it is shorter. Thus, only warm jets can have a noticeable effect on the synoptic range of the wind-speed spectrum, generating into it additional spectral peaks. Within such an approach, every a single jet is described by a self-similar compactly localized solution that can be considered as a constant-shear band.

Perturbations in the velocity profile of a laser-ablation-driven shock wave seeded by speckle in the spatial beam intensity (i.e., laser imprint) have been measured. Direct measurements of these velocity perturbations were recorded using a two-dimensional high-resolution velocimeter probing plastic material shocked by a 100-ps picket laser pulse from the OMEGA laser system. The measured results for experiments with one, two, and five overlapping beams incident on the target clearly demonstrate a reduction in long-wavelength ($>$25 um) perturbations with an increasing number of overlapping laser beams, consistent with theoretical expectations. These experimental measurements are crucial to validate radiation-hydrodynamics simulations of laser imprint for laser direct drive inertial confinement fusion research since they highlight the significant (factor of 3) underestimation of the level of seeded perturbation when the microphysics processes for initial plasma formation, such as multiphoton ionization are neglected., Comment: 6 pages, 5 figures

Refraction-enhanced x-ray radiography (REXR) is used to infer shock-wave positions of more than one shock wave, launched by a multiple-picket pulse in a planar plastic foil. This includes locating shock waves before the shocks merge, during the early time and the main drive of the laser pulse that is not possible with the velocity interferometer system for any reflector. Simulations presented in this paper of REXR show that it is necessary to incorporate refraction and attenuation of x rays along with the appropriate opacity and refractive-index tables to interpret experimental images. Simulated REXR shows good agreement with an experiment done on the OMEGA laser facility to image a shock wave. REXR can be applied to design multiple-picket pulses with a better understanding of the shock locations. This will be beneficial to obtain the required adiabats for inertial confinement fusion implosions.

Broad bandwidth, infrared light sources have the potential to revolutionize inertial confinement fusion (ICF) by suppressing laser-plasma instabilities. There is, however, a tradeoff: The broad bandwidth precludes high efficiency conversion to the ultraviolet, where laser-plasma interactions are weaker. Operation in the infrared could intensify the role of resonance absorption, an effect long suspected to be the shortcoming of early ICF experiments. Here we present simulations exploring the effect of bandwidth on resonance absorption. In the linear regime, bandwidth has little effect on resonance absorption; in the nonlinear regime, bandwidth suppresses enhanced absorption resulting from the electromagnetic decay instability. These findings evince that regardless of bandwidth, an ICF implosion will confront at least linear levels of resonance absorption.

This paper describes a technique for identifying trends in performance degradation for inertial confinement fusion implosion experiments. It is based on reconstruction of the implosion core with a combination of low- and mid-mode asymmetries. This technique was applied to an ensemble of hydro-equivalent deuterium-tritium implosions on OMEGA that achieved inferred hot-spot pressures ~56+/-7 Gbar [S. Regan et al., Phys. Rev. Lett. 117, 025001 (2016)]. All the experimental observables pertaining to the core could be reconstructed simultaneously with the same combination of low and mid modes. This suggests that in addition to low modes, that can cause a degradation of the stagnation pressure, mid modes are present that reduce the size of the neuron and x-ray producing volume. The systematic analysis shows that asymmetries can cause an overestimation of the total areal density in these implosions. It is also found that an improvement in implosion symmetry resulting from correction of either the systematic mid or low modes would result in an increase of the hot-spot pressure from 56 Gbar to ~80 Gbar and could produce a burning plasma when the implosion core is extrapolated to an equivalent 1.9 MJ symmetric direct illumination [A. Bose et al., Phys. Rev. E 94, 011201(R) (2016)].

The Rayleigh--Taylor instability which is responsible for the occurrence of narrow upward jets are studied in the scope of the nonhydrostatic model with horizontally--nonuniform density and the Newtonian cooling. As analysis shows, the total hierarchy of instabilities in this model consists of three regimes -- collapse, algebraic instability, and inertial motion. Realization of these stages, mutual transitions and interference depend on a ratio between two characteristic time scales -- collapse time and cooling time., Comment: 7 figures

We consider a variational problem with a polyconvex integrand and nonstandard boundary conditions that can be treated as minimization of the stress energy during the suturing process in the plastic surgery. Ex- istence of minimizers is proved as well as necessary optimality conditions are discussed.

Understanding and designing inertial confinement fusion (ICF) implosions through radiation-hydrodynamics simulations rely on the accurate knowledge of the equation of state (EOS) of the deuterium and tritium fuels. To minimize the drive energy for ignition, the imploding shell of DT fuel must be kept as cold as possible. Such low-adiabat ICF implosions can access to coupled and degenerate plasma conditions, in which the analytical or chemical EOS models become inaccurate. Using the path-integral Monte Carlo (PIMC) simulations we have derived a first-principles EOS (FPEOS) table of deuterium that covers typical ICF fuel conditions at densities ranging from 0.002 to 1596 g/cm3 and temperatures of 1.35 eV to 5.5 keV. We report the internal energy and the pressure, and discuss the structure of the plasma in terms of pair-correlation functions. When compared with the widely used SESAME table and the revised Kerley03 table, discrepancies in the internal energy and in the pressure are identified for moderately coupled and degenerate plasma conditions. In contrast to the SESAME table, the revised Kerley03 table is in better agreement with our FPEOS results over a wide range of densities and temperatures. Although subtle differences still exist for lower temperatures (T < 10 eV) and moderate densities (1 to 10 g/cc), hydrodynamics simulations of cryogenic ICF implosions using the FPEOS table and the Kerley03 table have resulted in similar results for the peak density, areal density ({\rho}R), and neutron yield, which are significantly different from the SESAME simulations., Comment: 15 pages, 18 figures, 1 long table