Search

Purpose: To investigate and compare 2 cone-beam computed tomography (CBCT) correction methods for CBCT-based dose calculation. Materials and Methods: Routine CBCT image sets of 12 head and neck cancer patients who received volumetric modulated arc therapy (VMAT) treatment were retrospectively analyzed. The CBCT images obtained using an on-board imager (OBI) at the first treatment fraction were firstly deformable registered and padded with the kVCT images to provide enough anatomical information about the tissues for dose calculation. Then, 2 CBCT correction methods were developed and applied to correct CBCT Hounsfield unit (HU) values. One method (HD method) is based on protocol-specific CBCT HU to physical density (HD) curve, and the other method (HM method) is based on histogram matching (HM) of HU value. The corrected CBCT images (CBCT HD and CBCT HM for HD and HM methods) were imported into the original planning system for dose calculation based on the HD curve of kVCT (the planning CT). The dose computation result was analyzed and discussed to compare these 2 CBCT-correction methods. Results: Dosimetric parameters, such as the D mean , D max and D 5% of the target volume in CBCT plan doses, were higher than those in the kVCT plan doses; however, the deviations were less than 2%. The D 2% , in parallel organs such as the parotid glands, the deviations from the CBCT HM plan dose were less than those of the CBCT HD plan dose. The differences were statistically significant ( P more...

Background: Osteosarcoma is the most leading primary malignancy of the bone in adolescents all over the world. Long non-coding RNA (lncRNA) 91 H has been reported to participated in multiple cancers. Meanwhile, lncRNA 91 H has been proved to be upregulated in osteosarcoma. However, the function of 91 H in osteosarcoma remains unclear. Methods: Gene and protein expressions in osteosarcoma cells were detected by qRT-PCR and western blot, respectively. Cell viability was tested by CCK-8 assay. Ki67 staining was used to measure cell proliferation. Cell apoptosis and cycle were assessed by flow cytometry. In addition, transwell assay was used to detect cell migration and invasion. Furthermore, Methylation-specific PCR (MSP) was performed to test the methylation of CDK4 promoter. Finally, xenograft mice model was established to explore the role of 91 H in osteosarcoma in vivo . Results: Knockdown of 91 H significantly inhibited the growth of osteosarcoma cells via inducing the cell apoptosis. In addition, 91 H siRNA notably suppressed the migration and invasion of osteosarcoma cells. Meanwhile, knockdown of 91 H inhibited the progression of osteosarcoma via inducing methylation of CDK4 promoter. Furthermore, 91 H knockdown obviously induced G1 arrest in osteosarcoma cells via inhibition of PCNA and Cyclin D1. Finally, knockdown of 91 H notably inhibited the tumor growth of osteosarcoma in vivo . Conclusion: knockdown of 91 H suppressed the tumorigenesis of osteosarcoma via inducing methylation of CDK4 promoter in vitro and in vivo . Thus, 91 H may serve as a new target for the treatment of osteosarcoma. more...

Purpose: The purpose of the present study was first to apply the progressive optimization algorithm based automatic volumetric modulated arc therapy (POA-VMAT) technology to accelerate and improve the radiotherapy of cervicothoracic esophageal cancer (CTEC). We comprehensive analyze the feasibility, normal tissue complication probability (NTCP) and dosimetric results of POA-VMAT, manual based VMAT and step-shoot intensity-modulated radiation therapy (IMRT) plans in the treatment of CTEC. Methods: Sixty patients with CTEC with or without concomitant chemotherapy at our institution between 2017 and 2019 were retrospectively identified. The manual 7field-IMRT (7f-IMRT), Single-arc-VMAT and Double-arc-VMAT (Single-Arc/Double-Arc) plans were generated in all cases. The POA-VMAT was designed using the automatic dual-arc VMAT technology of Pinnacle 3 9.10 planning system based on progressive optimization algorithm. Specially, it includes the selection of treatment techniques, the running of automated planning scripts, and the evaluation of the final radiotherapy regimen. Subsequently, quantitative evaluation of plans was performed by means of standard dose–volume histograms, homogeneity index (HI) and conformity index (CI). Results: Target dose conformity of the 7f-IMRT plan was inferior to all plans, whereas the Double-Arc plan was slightly inferior to the POA-VMAT but superior to the Single-Arc and 7f-IMRT plan. The HI for 7f-IMRT, Single-Arc, Double-Arc and POA-VMAT were 0.17 ± 0.08, 0.28 ± 0.06, 0.29 ± 0.06 and 0.28 ± 0.03, respectively. For the NTCP results, there was significant statistical difference among POA-VMAT, IMRT and VMAT plans. The total MU was reduced by 48.3% and 42.1% in Single-Arc and POA-VMAT plans compare to IMRT plans. Conclusions: By comprehensive consideration, POA-VMAT efficiently generate acceptable treatment plans for CTEC without dose escalation to OARs and overall superior to manual planning which is a good option for treating CTEC. more...

Validating digital pathology as substitute for conventional microscopy in diagnosis remains a priority to assure effectiveness. Intermodality concordance studies typically focus on achieving the same diagnosis by digital display of whole slide images and conventional microscopy. Assessment of discrete histological features in whole slide images, such as mitotic figures, has not been thoroughly evaluated in diagnostic practice. To further gauge the interchangeability of conventional microscopy with digital display for primary diagnosis, 12 pathologists examined 113 canine naturally occurring mucosal melanomas exhibiting a wide range of mitotic activity. Design reflected diverse diagnostic settings and investigated independent location, interpretation, and enumeration of mitotic figures. Intermodality agreement was assessed employing conventional microscopy (CM40×), and whole slide image specimens scanned at 20× (WSI20×) and at 40× (WSI40×) objective magnifications. An aggregate 1647 mitotic figure count observations were available from conventional microscopy and whole slide images for comparison. The intraobserver concordance rate of paired observations was 0.785 to 0.801; interobserver rate was 0.784 to 0.794. Correlation coefficients between the 2 digital modes, and as compared to conventional microscopy, were similar and suggest noninferiority among modalities, including whole slide image acquired at lower 20× resolution. As mitotic figure counts serve for prognostic grading of several tumor types, including melanoma, 6 of 8 pathologists retrospectively predicted survival prognosis using whole slide images, compared to 9 of 10 by conventional microscopy, a first evaluation of whole slide image for mitotic figure prognostic grading. This study demonstrated agreement of replicate reads obtained across conventional microscopy and whole slide images. Hence, quantifying mitotic figures served as surrogate histological feature with which to further credential the interchangeability of whole slide images for primary diagnosis. more...

Benign prostatic hyperplasia(BPH) is a common disease in middle-aged and elderly men, with lower urinary tract symptoms as the main manifestation, severely affecting the quality of life of patients. The pathogenesis of BPH is not yet fully understood, and there are still some challenges and limitations in western medicine treatment for BPH. Therefore, finding new and more effective treatment strategies is urgent. In recent years, many basic and clinical studies have confirmed the important role of traditional Chinese medicine in the treatment of BPH. This article reviews the progress of basic and clinical research in the treatment of BPH with traditional Chinese medicine, and believes that basic research mainly focuses on the active ingredients of Chinese medicine [regulating pathways such as NF-E2-related factor 2(Nrf2)/antioxidant response element(ARE), nuclear factor κB(NF-κB), epidermal growth factor receptor(EGFR)/signal transducer and activator of transcription 3(STAT3), phosphoinositide 3-kinase(PI3K)/protein kinase B(Akt)/mammalian target of rapamycin(mTOR), p38 mitogen-activated protein kinase(p38 MAPK)/forkhead box O subtype(FOXO3a), etc.], single Chinese herbs(regulating inflammatory factors, oxidative stress-related proteins, cell cycle-related proteins, and apoptotic factors, etc.), and Chinese herbal compounds and patent medicines [regulating extracellular signal-regulated kinase(ERK1/2), transforming growth factor-β(TGF-β)/Smad, mitogen-activated protein kinase(MAPK), PI3K/Akt, Nrf2, trefoil factor 2(TFF2)/Wnt, interleukin-6(IL-6)/Janus kinase 2(JAK2)/STAT3, hypoxia-inducible factor 1α(HIF-1α)/vascular endothelial growth factor receptor(VEGFR), etc.], and then play a therapeutic role by inhibiting BPH cell proliferation, oxidative stress, inflammatory response, promoting apoptosis, and inhibiting epithelial-mesenchymal transition. Clinical studies mainly focus on internal treatment, external treatment, combined internal and external treatment, and integrated Chinese and western medicine treatment as the main methods, aiming to improve traditional Chinese medicine syndrome scores, prostate symptom scores, residual urine volume, effective bladder volume, sexual quality of life, increase average urine flow rate, maximum urine flow rate, and promote balance of sex hormone secretion. Through this research, it is hoped to provide some reference ideas for clinical research and drug development for BPH. more...

Chronic prostatitis/chronic pelvic pain syndrome(CP/CPPS) is a common urological disease with complex etiology. The treatment effect of western medicine is not satisfactory, and the course of the disease is protracted, which brings great trouble to patients. Traditional Chinese medicine(TCM) has a variety of treatment methods based on syndrome differentiation and treatment, including internal treatment with TCM, acupuncture and massage, and other external treatment methods for comprehensive treatment, with significant effect. This study summarized the etiology and pathogenesis of CP/CPPS and found that western medicine cannot fully explain the etiology and pathogenesis of CP/CPPS. It was believed that CP/CPPS was mainly related to many factors such as special pathogen infection, voiding dysfunction, mental and psychological abnormalities, neuroendocrine abnormalities, immune abnormalities, excessive oxidative stress, pelvic diseases, and heredity. TCM believed that CP/CPPS was caused by damp heat, blood stasis, Qi stagnation, and poisoning and was closely related to the organs of the liver, spleen, kidney, lung, stomach, bladder, and meridians of Chong and Ren channels and three yin channels of the foot. In the treatment of TCM, multiple comprehensive treatment plans are currently used, including internal treatment with TCM(decoction, proprietary Chinese medicine, and unique therapies of famous doctors), acupuncture and massage treatment, and other external treatment methods(rectal administration, topical application of TCM, and ear acupoint pressure). Comprehensive regulation has significant clinical efficacy and prominent characteristics of TCM, and it is worth clinical promotion. This study aims to provide a reference for clinical prevention and treatment of CP/CPPS and points out potential directions for future research in this field. more...

Graphene oxide as a radon barrier in living environments was introduced by intercalating the polymer resin-coated layer inside a multilayer membrane with an area of 1 × 10 m and a thickness of 2.5 mm, prepared by the roll-to-roll method. A 5 μm-thick graphene oxide polymer resin (GOPR) layer was coated on polyethylene terephthalate (PET) film (100 μm) between the two styrene-butadiene-styrene (SBS)-modified bitumen asphalt layers fitted for construction sites. The inserted graphene oxide materials were characterized by means of infrared, Raman, and X-ray photoelectron spectroscopy (XPS). Dispersion-corrected density functional theory (DFT) calculations suggested weaker binding energies on the oxide surfaces and higher penetration energy barriers of graphene nanopores for radon ( 222 Rn) than in the cases of the atmospheric gas molecules Ar, H 2 O, CO 2 , H 2 , O 2 , and N 2 . Theoretical calculations of the graphene nanopores supported the higher barrier energies of 222 Rn than most ambient gases. The roll-to-roll prepared graphene materials exhibited good barrier properties for 222 Rn as well as for the ambient gases. The purpose of our experimental and theoretical study is to provide a better understanding of using graphene-based materials to reduce the risk of carcinogenic radon gas in construction sites and residential buildings for practical applications., (Copyright © 2019 Elsevier B.V. All rights reserved.) more...

Thermally responsive shape-memory polymers have received widespread attention in the biomedical field. In this study, biocompatible and biodegradable polyurethane (PU) and polycaprolactone (PCL) were blended to obtain shape-memory properties. Highly crystalline PCL was used as a hard segment, and PU synthesized from isosorbide, which is non-toxic and chemically and thermally stable, was used as a soft segment. The obtained PU/PCL blends containing the 30%, 50%, and 70% PU by weight were investigated for their thermal properties, mechanical properties, and shape-memory behavior. The 30%PU/PCL polymer has the best shape-memory characteristics and can be knotted by itself in the hot water bath, indicating that it can be applied in smart suture applications. The degradation test performed at 37 °C in phosphate buffered solution showed a mass loss of 2-4% for the obtained PU/PCL blends after 6 weeks. Finally, MC3T3-E1 cells cultured on PU/PCL blends showed high biocompatibility due to high adhesion and proliferation., (Copyright © 2018 Elsevier B.V. All rights reserved.) more...

We demonstrate a controllable and reliable process for manifesting color patterns on solid substrates using cellulose nanocrystals (CNCs) without the use of any other chemical pigments. The color can be controlled by adjusting the assembly conditions of the CNC solution during a dip-and-pull process while aiding the close packing of CNCs on a solid surface with the help of ionic-liquid (1-butyl-3-methylimidazolium) molecules that screen the repelling electrostatic charges between CNCs. By controlling the pulling speed from 3 to 9 μm/min during the dip-and-pull process, we were able to control the film thickness from 100 to 300 nm, resulting in films with different colors in the visible range. The optical properties were in good agreement with the finite-difference time-domain simulation results. By functionalizing these films with amine groups, we developed colorimetric sensors that can change in color when exposed to aldehyde gases such as formaldehyde or propanal. A principal component analysis showed that we can differentiate between different aldehyde gases and other interfering molecules. We expect that our approach will enable inexpensive and rapid volatile organic compound detection with on-site monitoring capabilities. more...

In this study, polycarbonate diol/isosorbide-based antibacterial polyurethane nanofiber fabrics containing Ag nanoparticles were prepared by electrospinning process. Bio-based highly elastic polyurethane was prepared from hexamethylene diisocyanate and isosorbide/polycarbonate diol (8/2) by a simple one-shot bulk polymerization. Ag nanoparticles were formed using simple thermal reduction of silver 2-ethylhexylcarbamate at 120℃. The structural and morphological properties of polyurethane/Ag nanofibers were characterized by X-ray diffraction and scanning electron microscopy. The polyurethane nanofiber fabrics were flexible, with breaking strains from 355% to 950% under 7.28 to 23.1 MPa tensile stress. The antibacterial effects of the treated polyurethane/Ag fabrics against Staphylococcus aureus and methicillin resistant Staphylococcus aureus were examined and found to be excellent. Cell proliferation using the immortalized human keratinocyte HaCaT cell line was performed in order to determine cell viability in the presence of polyurethane and polyurethane/Ag fabrics, showing cytocompatiblility and a lack of toxicity. more...

In order to overcome major problems regarding the lack of affinity to solvents and limited reactivity of the free amines of chitosan, introduction of appropriate spacer arms having terminal amine function is considered of interest. L-Alanine-N-carboxyanhydride was grafted onto chitosan via anionic ring-opening polymerization. The chemical and structural characterizations of L-alanine-grafted chitosan (Ala-g-Cts) were confirmed through Fourier transform infrared spectroscopy and proton nuclear magnetic resonance spectroscopy ((1)H NMR). In addition, the viscoelastic properties of Ala-g-Cts were examined by means of a rotational viscometer, and thermal analysis was carried out with a thermogravimetric analyzer and differential scanning calorimetry. Morphological changes in the chitosan L-alanine moiety were determined by x-ray diffraction. To determine the feasibility of using these films as biomedical materials, we investigated the effects of their L-alanine content on physical and mechanical properties. The biodegradation results of crosslinked Ala-g-Cts films were evaluated in phosphate-buffered solution containing lysozyme at 37℃. Proliferation of MC3T3-E1 cells on crosslinked Ala-g-Cts films was also investigated with use of the CCK-8 assay., (© The Author(s) 2016.) more...

A new donor moiety, 7,7,13,13-tetramethyl-7,13-dihydro-5H-indeno[1,2-b]acridine (IAc), was developed to control the highest occupied molecular orbital (HOMO) dispersion of thermally activated delayed fluorescent (TADF) emitters. The IAc unit expanded the HOMO dispersion of the emitters and increased the quantum efficiency of the TADF devices up to 20.9 %., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.) more...

A new family of highly elastic polyurethanes (PUs) partially based on renewable isosorbide were prepared by reacting hexamethylene diisocyanate with a various ratios of isosorbide and polycarbonate diol 2000 (PCD) via a one-step bulk condensation polymerization without catalyst. The influence of the isorsorbide/PCD ratio on the properties of the PU was evaluated. The successful synthesis of the PUs was confirmed by Fourier transform-infrared spectroscopy and (1)H nuclear magnetic resonance. The resulting PUs showed high number-average molecular weights ranging from 56,320 to 126,000 g mol(-1) and tunable Tg values from -34 to -38℃. The thermal properties were determined by differential scanning calorimetry and thermogravimetric analysis. The PU films were flexible with breaking strains from 955% to 1795% at from 13.5 to 54.2 MPa tensile stress. All the PUs had 0.9-2.8% weight lost over 4 weeks and continual slow weight loss of 1.1-3.6% was observed within 8 weeks. Although the cells showed a slight lower rate of proliferation than that of the tissue culture polystyrene as a control, the PU films were considered to be cytocompatible and nontoxic. These thermoplastic PUs were soft, flexible and biocompatible polymers, which open up a range of opportunities for soft tissue augmentation and regeneration., (© The Author(s) 2015.) more...

In this study, cotton fabric was successfully coated with silver to have both antibacterial and conductive properties through a facile thermal reduction process at a low temperature using silver 2-ethylhexylcarbamate as the starting material. The cotton fabric modified with 3-mercaptopropyltriethoxysilane was padded with a solution of silver 2-ethylhexylcarbamate in methanol and then reduced for the in situ generation of Ag nanoparticles by only heating at 130°C. The silver-coated cotton fabrics (cotton/Ag) were examined by a scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray (EDX) and X-ray photoelectron spectroscopy (XPS) analyses. The morphology of cotton/Ag nanocomposite fabrics conveyed a uniform and continuous layer of silver metal on the cotton surface. The results indicated that the silver nanoparticles were assembled on cotton fibers with a size range from 20 to 100 nm. The cotton/Ag imparts high conductivity to the textiles with electric resistance as low as 3.92±0.18 Ω. The antibacterial effects of the treated cotton fabric against Escherichia coli O157:H7 (ATCC 43889) and Staphylococcus aureus (ATCC 25923) were examined and found to be excellent., (Copyright © 2014 Elsevier Ltd. All rights reserved.) more...

Bio-based high elastic polyurethanes were prepared from hexamethylene diisocyanate and various ratios of isosorbide to poly(tetramethylene glycol) as a diol by a simple one-shot bulk polymerization without a catalyst. Successful synthesis of the polyurethanes was confirmed by Fourier transform-infrared spectroscopy and (1)H nuclear magnetic resonance. Thermal properties were determined by differential scanning calorimetry and thermogravimetric analysis. The glass transition temperature was -47.8℃. The test results showed that the poly(tetramethylene glycol)/isosorbide-based elastomer exhibited not only excellent stress-strain properties but also superior resilience to the existing polyether-based polyurethane elastomers. The static and dynamic properties of the polyether/isosorbide-based thermoplastic elastomer were more suitable for dynamic applications. Moreover, such rigid diols impart biocompatible and bioactive properties to thermoplastic polyurethane elastomers. Degradation tests performed at 37℃ in phosphate buffer solution showed a mass loss of 4-9% after 8 weeks, except for the polyurethane with the lowest isosorbide content, which showed an initial rapid weight loss. These polyurethanes offer significant promise due to soft, flexible and biocompatible properties for soft tissue augmentation and regeneration., (© The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.) more...

Blue light-emitting spiro[benzotetraphene-fluorene] (SBTF)-based host materials, 3-(1-naphthyl)-10-naphthylspiro[benzo[ij]tetraphene-7,9'-fluorene] (1), 3-(2-naphthyl)-10-naphthylspiro[benzo[ij]tetraphene-7,9'-fluorene] (2), and 3-[2-(6-phenyl)naphthyl]-10-naphthylspiro[benzo[ij]tetraphene-7,9'-fluorene] (3) were designed and prepared via multi-step Suzuki coupling reactions. Introducing various aromatic groups into SBTF core lead to a reduction in band gap and a determination of the color purity and luminescence efficiency. Typical sky-blue fluorescent organic light emitting diodes with the configuration of ITO/N,N'-di(1-naphthyl)-N,N'-bis[(4-diphenylamino)phenyl]-biphenyl-4,4'-diamie (60 nm)/N,N,N',N'-tetra(1-biphenyl)-biphenyl-4,4'-diamine (30 nm)/host: dopant (30 nm, 5%)/LG201 (electron transporting layer, 20 nm)/LiF/Al were developed using SBTF derivatives as a host material and p-bis(p-N,N-diphenyl-aminostyryl)benzene (DSA-Ph) as a sky-blue dopant material. A device obtained from three materials doped with DSA-Ph showed color purity of 0.148 and 0.239, a luminance efficiency of 7.91 cd/A, and an external quantum efficiency >4.75% at 5 V. more...

As a way to modify both the physical and biological properties of a highly elastic and degradable polyurethane (PU), silk fibroin (SF) was blended with the PU at differing ratios. With increasing SF content, the tensile strength decreased as did the strain at break; the stiffness increased to around 35 MPa for the highest silk content. C2C12 (a mouse myoblast cell line) cells were used for in vitro experiments and showed significantly improved cell responses with increasing SF content. With increasing SF content the number of non-adherent cells was reduced at both 4 and 8h compared to the sample with the lowest SF content. In addition, muscle marker genes were upregulated compared to the sample containing no SF, and in particular sarcomeric actin and α-actin., (Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.) more...

There is a continuing need to develop scaffold materials that can promote vascularisation throughout the tissue engineered construct. This study investigated the effect of cobalt oxide (CoO) doped into titanium phosphate glasses on material properties, biocompatibility and vascular endothelial growth factor (VEGF) secretion by osteoblastic MG63 cells. Glasses composed of (P2O5)45(Na2O)20(TiO2)05(CaO)30-x(CoO)x(x=0, 5, 10, and 15 mol%) were fabricated and the effect of Co on physicochemical properties including density, glass transition temperature (Tg), degradation rate, ion release, and pH changes was assessed. The results showed that incorporation of CoO into the glass system produced an increase in density with little change in Tg. It was then confirmed that the pH did not change significantly when CoO was incorporated in the glass, and stayed constant at around 6.5-7.0 throughout the dissolution study period of 336 h. Ion release results followed a specific pattern with increasing amounts of CoO. In general, although incorporation of CoO into a titanium phosphate glass increased its density, other bulk and surface properties of the glass did not show any significant changes. Cell culture studies performed using MG63 cells over a 7-day period indicated that the glasses provide a stable surface for cell attachment and are biocompatible. Furthermore, VEGF secretion was significantly enhanced on all glasses compared with standard tissue culture plastic and Co doping enhanced this effect further. In conclusion, the developed Co-doped glasses are stable and biocompatible and thus offer enhanced potential for engineering vascularized tissue., (Crown Copyright © 2013. Published by Elsevier B.V. All rights reserved.) more...

Biodegradable-biocompatible polyurethanes were prepared with fixed hexamethylene diisocyanate and varying ratios of isomannide and poly(ϵ-caprolactone) diol using a simple one-step polymerization without a catalyst. The polyurethane structures were confirmed by 1 H-nuclear magnetic resonance, Fourier transform infrared spectroscopy, and gel permeation chromatography. The glass transition temperatures were determined by thermal analysis to be between 25°C and 30°C. Degradation tests performed at 37°C in phosphate buffer produced mass losses of 5%-10% after 8 weeks. After 5 days of culture, using osteoblastic cells, the relative cell number on all the polyurethane films was only slightly lower than that of an optimized tissue culture plastic. These polymers offer significant promise with a simplistic synthesis and controlled degradation. more...

Biocompatible and biodegradable polyurethanes were prepared with fixed aliphatic diisocyanate level and varying ratios of isosorbide, and PCL diol via a simple one-shot polymerization without a catalyst. The successful synthesis of the polyurethanes was confirmed by gel permeation chromatography, (1)H-nuclear magnetic resonance and Fourier transform-infrared spectroscopies and the thermal properties were determined by differential scanning calorimetry and showed glass transition temperatures of around 30-35 °C. The degradation tests were performed at 37 °C in phosphate buffer solution (approx. pH 7.3) and showed a mass loss of around 5 % after 12 weeks, except for the polymer with the highest isosorbide content which showed an initial rapid mass loss. The in vitro cytocompatibility test results following culture of osteoblasts on the polymer surface showed that relative cell number on all of the polyurethane films after 5 days of cultured on polymer films was lower compared to the proliferation rate on the optimized tissue culture plastic. These polymers offer significant promise due to the simplicity of the synthesis and the controlled degradation. more...

High molecular weight biodegradable polyesters were prepared from sebacic acid, ethylene glycol and butylene glycol through a simple non-solvent polycondensation with a low toxicity catalyst. The successful synthesis of the polyesters was confirmed by gel permeation chromatography, (1)H-nuclear magnetic resonance and Fourier transform-infrared spectroscopies and differential scanning calorimetry. The degradation tests were performed at 37 °C in phosphate buffer solution (pH 7.4) and showed a mass loss of ~5% over 12 weeks compared with only 2% for polycaprolactone (PCL). Reverse transcription polymerase chain reaction results following culture of osteoblasts on the polymer surface showed that poly(ethylene sebacate) and poly(butylene sebacate) films were optimal for osteoblast formation in terms of Runx 2 and osteocalcin gene expression., (Copyright © 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.) more...

Biocompatible polyesters were prepared from isosorbide, various aliphatic diacid via a simple non-solvent polycondensation with a low toxicity catalyst. The successful synthesis of the polyesters was confirmed by gel permeation chromatography, (1)H-nuclear magnetic resonance and Fourier transform infrared spectroscopes, and differential scanning calorimetry. The degradation tests were performed at 37°C in phosphate buffer solution (approximately pH 7.3). The in vitro cytocompatibility test results following culture of osteoblasts on the polymer surface showed that relative cell number on poly(isosorbide sebacate) and poly(isosorbide adipate) films after 5 days of culture on polymer films proliferated at least as well as those on a culture plate. more...

Silver nanoparticles (AgNPs) have found a variety of uses including biomedical materials; however, studies of the cytotoxicity of AgNPs by size effects are only in the beginning stage. In this study, we examined the size-dependent cellular toxicity of AgNPs using three different characteristic sizes (∼ 10, 50, and 100 nm) against several cell lines including MC3T3-E1 and PC12. The cytotoxic effect determined based on the cell viability, intracellular reactive oxygen species generation, lactate dehydrogenase release, ultrastructural changes in cell morphology, and upregulation of stress-related genes (ho-1 and MMP-3) was fairly size- and dose-dependent. In particular, AgNPs stimulated apoptosis in the MC3T3-E1 cells, but induced necrotic cell death in the PC12 cells. Furthermore, the smallest sized AgNPs (10 nm size) had a greater ability to induce apoptosis in the MC3T3-E1 cells than the other sized AgNPs (50 and 100 nm). These data suggest that the AgNPs-induced cytotoxic effects against tissue cells are particle size-dependent, and thus, the particle size needs careful consideration in the design of the nanoparticles for biomedical uses., (Copyright © 2012 Wiley Periodicals, Inc.) more...

A simple strategy was developed based on a new monomer containing both photocurable function and ammonium salt, N-(2-cinnamoyloxy)ethyl-N-(2-(methacryloyloxy)ethyl)-N,N-dimethyl ammonium bromide (CMDAB) to obtain photocurable polyelectrolyte ink and stable humidity-sensitive membranes by printing process. Humidity-sensitive membranes are photocrosslinked polyelectrolytes obtained from copolymers of [2-(methacryloyloxy)ethyl] dimethyl propyl ammonium bromide (MEPAB), CMDAB and MMA. A flexible gold electrode/polyimide was pretreated with 2-(mercaptoethyl) cinnamamide (MEC) containing a thiol-coupling agent for the purpose of anchoring the humidity-sensitive polyelectrolyte to the gold electrode. The sensors using screen printing methods reduced the deflection of sensor characteristics showing humidity precision ±1%RH. The photocured copolymer MEPAB/CMDAB/MMA = 63/7/30 show good sensitivity (0.0586 logΩ/%RH) changing resistance approximately four orders of magnitude with relative humidity varying from 20% to 95% and fast response and recovery time. The resultant sensors showed acceptable linearity (Y = -0.04X + 7.0, R(2) = -0.9900) and small hysteresis. The reliability including water resistance and a long-term stability were estimated for the application of the flexible humidity sensor prepared by screen printing process. more...

The development of effective cellular imaging requires a specific labeling method for targeting, tracking, and monitoring cellular/molecular events in the living organism. For this purpose, we studied the cellular uptake of isocyanide functionalized silver and gold nanoparticles by surface enhanced Raman scattering (SERS). Inside a single mammalian cell, we could monitor the intracellular behavior of such nanoparticles by measuring the SERS spectra. The NC stretching band appeared clearly at approximately 2,100 cm-1 in the well-isolated spectral region from many organic constituents between 300 and 1,700 or 2,800 and 3,600 cm-1. The SERS marker band at approximately 2,100 cm-1 could be used to judge the location of the isocyanide-functionalized nanoparticles inside the cell without much spectral interference from other cellular constituents. Our results demonstrate that isocyanide-modified silver or gold nanoparticle-based SERS may have high potential for monitoring and imaging the biological processes at the single cell level. more...

The adsorption and structure of cyclohexyl isothiocyanate (CHIT) on gold surfaces has been investigated by surface-enhanced Raman scattering (SERS) and scanning tunneling microscopy (STM). Depending on the concentration, the spectral changes of the NCS stretching vibration on gold nanoparticles appeared to be more conspicuous than those of cyclohexyl ring modes. Both equatorial and axial chair conformers of CHIT were found to exist at low bulk concentrations near the monolayer coverage limit, whereas the equatorial chair conformer appeared to be dominant at high bulk concentrations. It was also observed that the ring conversion of equatorial to axial conformers can easily occur at higher temperatures, and the mole fraction of the axial form is assumed to increase with increasing temperature from 30 to 60 degrees C. Alternatively, STM imaging revealed that the adsorption of CHIT molecules on Au(1 1 1) leads to the formation of disordered SAMs with a few vacancy islands, as opposed to the formation of well-ordered self-assembled monolayers (SAMs) by cyclohexanethiols. more...

We developed a simple method for the preparation of polyelectrolyte/silver nanocomposites, where silver nanoparticles were dispersed in a polyelectrolyte. Copoly(TEAMPS/VP)/silver (w/w=100/0, 100/1, 100/2, 100/3 and 100/4) nanocomposites were obtained by a thermal decomposition reaction of silver carbamate complex at 130 degrees C, and well-dispersed silver colloids were stabilized by copolymer of tetraethylammonium 2-acrylamido-2-methyl-1-propanesulfonate (TEAMPS) and N-vinylpyrrolidone (VP). A dark brown solution in its UV-vis absorption spectrum showed surface plasmon resonance absorption bands at 420 nm in solution. The silver precursor and the resulting polyelectrolyte/Ag nanocomposite was characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (XRD), infrared (IR), transmission electron microscopy (TEM). In addition the humidity-sensing properties using copoly(TEAMPS/VP)/Ag nanocomposite films were examined. more...

The size of gold nanoparticle aggregates was controlled by manipulating the interparticle interaction. To manipulate the interparticle interaction of gold nanoparticles prepared by citrate reduction, we applied the substitutive adsorption of benzyl mercaptan on the particle surface in the absence of the cross-linking effect. Various experimental techniques such as UV-vis absorption spectroscopy, surface-enhanced Raman scattering, quasi-elastic light scattering, and zeta-potential measurement were used to characterize the nanoparticle aggregates. Our results suggest that the replacement of the trivalent citrate ions adsorbed on the nanoparticle surface with monovalent benzyl mercaptan ions should destabilize the particles, causing aggregation and hence the increase in the size of nanoparticle aggregates. These experimental results were successfully rationalized by the classical DLVO (Derjaguin-Landau-Vervey-Overbeek) theory that describes the interparticle interaction and colloidal stability in solution. Our findings suggest that the control of surface potential is crucial in the design of stable gold nanoparticle aggregates. more...

The spectral behaviors of 4-n-pentyl-4'-cyanobiphenyl (5 CB) have been studied by means of temperature-dependent Raman spectros-copy in the range between --70 and 70 degrees C. The nu(C identical with N) bands in the Raman spectra were found splitting below the transition temperature from the solid to the nematic liquid crystalline phase at approximately 24 degrees C, suggesting the existence of solid crystalline polymorphism. The interfacial structures of 5 CB on metal plate surfaces have been reexamined by surface-enhanced Raman scattering (SERS) at different temperatures. On Ag and Au, the asymmetric shapes of the nu(C identical with N) bands suggest that there should exist different binding schemes for 5 CB on metal surfaces. These asymmetric bands in the nu(C identical with N) stretching region were found to vary in changing temperature. more...

New trialkoxysilyl group-containing copolymers for humidity-sensitive polyelectrolytes were prepared by copolymerization of [2-(methacryloyloxy)ethyl]trimethyl ammonium chloride (METAC), 3-(trimethoxysilyl)propyl methacrylate (TSPM) and 2-ethylhexyl acrylate (2-EHA). They were self-crosslinkable copolymers composed of different contents of METAC/TSPM/2-EHA = 4/1/5 and 4/2/4. The resistance varied from 10(7) to 10(3)[capital Omega] between 20% RH and 95% RH, which was required for a humidity sensor operating at ambient humidity. Temperature dependence, hysteresis, response time, water durability and long-term stability at high temperature and humidity were also measured and estimated. more...

Adsorption of 1,4-phenylenediisocyanide (PDI) has been studied for different-sized gold nanoparticles with mean diameters of 6, 14, 23, 40, 57, and 97 nm using UV-vis absorption spectroscopy and surface-enhanced Raman scattering (SERS). The SERS enhancement was found to be relatively weak for 6-nm particles due to less aggregation between PDI and gold particles. Concentration-dependent SERS spectra show that PDI was assumed to bridge two different gold particles at low concentrations of PDI, but as the concentration was increased, the bridge appeared to be broken, and PDI bonded to the gold particle only via one of its two isocyanide groups. For the 57- and 97-nm particles, however, the nu(NC)(free) stretching band in the SERS spectrum almost disappeared, even at a high bulk concentration of PDI, differently from the case of the smaller sizes (14, 23, and 40 nm). The 57- and 97-nm particles appeared to cross-link through the pendent isocyanide group even at a high bulk concentration. UV-vis absorption spectra indicated that PDI appeared to aggregate more extensively with increasing size in agreement with Raman data. Our result shows an example that the adsorption scheme of an aromatic diisocyanide may be varied depending on particle size as well as the bulk concentration. more...