Search

The research assessed waste-based briquettes consumption compared to conventional fuels in the Andes. Laboratory tests were conducted together with on-field analysis in Colquencha (Bolivia). The laboratory study shows that the performances of briquettes are better in terms of PM2.5 (933.4 ± 50.8 mg kg−1) and CO emissions (22.89 ± 2.40 g kg−1) compared to animal dung (6265.7 ± 1273.5 mgPM2.5 kg−1 and 48.10 ± 12.50 gCO kg−1), although the boiling time increased due to the lower fuel consumption rate and firepower compared to shrubs. The social survey organized with 150 Bolivian citizens suggested that low-income households are not able to pay for an alternative fuel: about 40% would pay less than 4 USD per month, while methane use for cooking is positively correlated with the income level (r = 0.244, p < 0.05). On field analysis suggested that local cookstoves are not appropriate for briquettes combustion since indoor air pollution overcomes 30 ppm of CO and 10 mgPM2.5 m-3. On balance, local small manufactures can be the main target for selling waste-based briquettes to reduce shrubs and wood consumption. However, briquettes production costs seem not yet competitive to natural easy-to-obtain fuels (i.e., animal dung). The research encourages the use of cellulosic and biomass waste-based briquettes in the Andean area for cooking, heating, or manufacturing and strongly advises policy-makers to introduce economic incentives for the recovery of secondary raw materials. • Analysis of waste-based briquettes use in Andean areas were conducted. • Laboratory analysis, social surveys, and on field evaluations are the methods. • Briquettes can be employed for reducing about 30% of the conventional fuels. • The research encourages the employment of waste-based briquettes in the Andes. • Incentives to briquettes production and consumption should be introduced. [ABSTRACT FROM AUTHOR]

• Analysis of formal and informal selective collection scenarios was carried out. • Geographic information systems were used for quantifying waste pickers activity. • Informal recycling allows reducing management expenses of about 10%. • The increase of 3.5% of recycling rate is obtained if waste pickers are included. • Waste pickers are recommended to be included in solid waste management planning. The analysis of municipal solid waste (MSW) selective collection (SC) scenarios is compulsory for planning future policies and actions towards circular economy. The use of geographic information system (GIS) is appropriated for obtaining reliable data about SC yields and management costs. However, in low-middle income countries, advanced assessments are difficult to introduce due to the lack of technical knowledge, financial support and the presence of the informal recycling sector. This research aims to assess the main potentialities of the introduction of SC systems in a Bolivian developing city taking into account the informal SC system in place. The study was conducted with QGIS3.8 software in order to evaluate the main advantages of the implementation of formal and informal recycling chains. Results reported that, comparing the implementation of formal SC of MSW with the scenario that considered the inclusion of the informal recycling, the activity of waste pickers allows reducing the expenses of about 10%, increasing the recycling rate of about 3.5%, and reducing the distances traveled with compactor trucks of about 7%. It means that, the annual path traveled by the collection trucks for gathering about 16,000ty−1, is reduced by 2734kmy−1, reducing the waste disposed to landfill of about 543.6ty−1 and the expenses of about €59,000 per year. The presentation of these results to policy-makers can support decision-making boosting the implementation of recycling activities including waste pickers. The study provided a contribution to the scientific literature assessing the main challenges and opportunities for implementing the circular economy in developing regions. [ABSTRACT FROM AUTHOR]

Abstract The introduction of effective solid waste management strategies in developing countries should be considered for improving sustainability at global level. Many barriers should be overcome, concerning the introduction of environmental policies, effective investments, social inclusion and public awareness, which are significant issues in low-middle income countries. The Circular Economy could represent the answer for improving current solid waste management activities worldwide, since denote the principle of waste valorization and recycling for boosting developing economies. This paper is focused on this theme, analyzing main opportunities for improving the current state of solid waste management in developing big cities. The solid waste management of two countries are reviewed: Romania is the emerging country where Circular Economy is becoming a future objective due to economic aids and strength regulations which the European Union (EU) established for the nations forming parts the alliance; as a comparison, Bolivia is reported for evaluating main differences founded for developing recycling systems in a no-EU country. These two case studies could be of interest for highlighting main pros and cons of the participation into a wide organization like the EU for introducing in short terms Circular Economy principles. Moreover, a theoretical Circular Economy model for developing big cities in low-middle income countries is described within the study for effectively comparing which chances can spread for these countries as regard municipal solid waste exploitation. Despite the economic level, Romania and Bolivia are both facing with many solid waste management issues although in different magnitude. For the Romanian case study, it is visible how it cannot achieve the European goals for 2020 due the need of change in public recycling behavior. Bolivia, instead, represents the case where international aids and new investments are required, considering the informal sector into the formal management system as a real opportunity for improving local recycling rate. In conclusion, the comparison suggests how external supports led to implement the principles of the Circular Economy within a developing region. The model of Circular Economy proposed is recommended for developing big cities in order to advance a new form of safe employment, encouraging the activities that are still in action (i.e. informal sector) and boosting the principles of sustainable development. Highlights • A circular economy model for developing countries was presented. • Solid waste management of Romania and Bolivia can be compared. • Municipal and "special" solid waste should be managed in an integrated manner. • Integrated regulations about solid waste are essential for developing countries. • The informal sector plays a key role on sustainable solid waste management. [ABSTRACT FROM AUTHOR]

• Quality of solid recovered fuel (SRF) potentially produced in Bolivia is assessed. • SRF can be obtained with 80% plastics (85% PE, 15% PP) and 20% cellulosic. • SRF from municipal waste can provide a maximum of 23.4% of energy required by cement industries. • SRF exploitation can contribute to recovery about 5.3% of the waste maximum. • About 30,247 million cubic feet of methane can be saved in 10 years. Solid recovered fuels (SRF) can provide another treatment option to the solid waste management (SWM) sector. However, in developing countries, to date, this system approach has not found considerable application. In Bolivia, SRF is not deemed within the national regulation and the final disposal in open dumping areas is still a reality. This research article provides the first attempt in evaluating the SRF characteristics and its potentialities in Bolivia, taking La Paz as a case study. Laboratory analysis of the rejects produced after selective collection and sorting has been conducted, focusing on non-hazardous and non-recyclable waste fractions. The international standards related to EN 15359:2011 for the classification of the SRF were employed, assessing the most feasible mix of materials to provide the highest classification of SRF in terms of low calorific value (LCV), chlorine, and mercury concentration. Results reported that the SRF made of 80% plastics (85% PE and 15% PP) and 20% cellulosic (blend 2), as well as 30% plastics (50% PP and 50% PE) and 70% cellulosic (blend 1), can be considered an alternative fuel in Bolivia. On balance, it has been estimated that the use of non-recyclable plastics and cardboard from municipal solid waste can provide, on average, about 0.9–2.7 billion MJ of energy for cement kilns, solving about 1.4–5.3% of the SWM issues and covering about 8–23.4% of the energy demand for cement production in Bolivia. These results are novel for the scientific literature for estimating the potentialities of SRF in Latin America. [ABSTRACT FROM AUTHOR]

• LCA of the municipal solid waste management system of La Paz is implemented. • Extensive sensitivity analysis is introduced for evaluating results reliability. • Environmental benefits due to recycling are discussed. • Landfill gas collection efficiency is the parameter that affect results reliability. • Recycling benefits are mainly related to toxicity environmental indicators. The life cycle assessment (LCA) of municipal solid waste (MSW) systems in developing countries is a matter of research. Obtain reliable results is challenging since field data and local databases are not always available. The research presented in this paper explores this issue in La Paz (Bolivia), where six environmental impact categories were assessed. The LCA, related to the formal MSW management system of the city, involves a sensitivity analysis of ten parameters and the scenario assessment in relation to the increase of the recycling rate. Results report that the environmental impacts are mostly sensitive in relation to landfill gas collection efficiency, use of plastic bags, the transportation distances of collected waste, and the replacement rate of virgin materials. Global warming potential is the impact category most variable (341.38–551.95 kg CO 2 -eq t MSW −1), although it is not considerably reduced by recycling, which contributed mostly to the human toxicity and freshwater aquatic ecotoxicity. Doubling the amount of MSW recycled, from 235 t to about 473 t per year, human toxicity potential reduces of about 18% while freshwater aquatic ecotoxicity of about 12%. This research contributes for evaluating the most sensitive parameters in an MSW–LCA and to support policymakers towards waste recycling and sustainable development in Latin America developing cities. [ABSTRACT FROM AUTHOR]

Waste-based briquettes can be an alternative option that can foster the reduction of waste inflow into final disposal sites and introduce alternative energy sources for cooking and heating in rural areas. In particular, the assumption of waste-based briquettes in Andean areas can be of higher potential, due to the lack of biomass sources locally available and the low environmental temperature that increases the requirements of heating systems. The current research would provide a contribution to the scientific literature by introducing a combustion analysis at 3300 m above the sea level for comparing the thermal efficiency and emissions of sawdust and cardboard waste-based briquettes with conventional firewood for heating and cooking purposes. Laboratory tests were carried out for estimating five combustion efficiency parameters, as well as CO, CO 2 , and PM2.5 emissions. Results suggested that 80% cardboard and 20% sawdust briquettes increase the boiling time of water by about 30–50% compared to firewood, due to the lower combustion power (−44%). On the other hand, the thermal efficiency increases of about 10–13%, while biomass consumption and energy consumption per minute decrease by about 27% and 44%, respectively. In addition, emissions reduce compared to firewood, from 32.6 g CO kg−1 to 22.9 g CO kg−1 and from 1260 mgPM2.5 kg−1 to 933 mgPM2.5 kg−1. On balance, the research demonstrates that non-recyclable cardboard waste obtained from separate collection and discarded sawdust from sawmills can be employed for briquettes production as alternative fuels for heating systems in Andean rural areas, contributing to reducing waste final disposal and boosting circular systems. • Firewood and cardboard waste-based briquettes combustion evaluations are conducted. • 20% sawdust - 80% cardboard waste briquettes achieved higher thermal efficiency. • PM2.5 emissions are considerably lower for 80% cardboard waste briquettes. • Cardboard based briquettes can be a potential alternative fuel for the Andean area. [ABSTRACT FROM AUTHOR]