Search

Diethyl carbonate (DEC) is a common component of the liquid electrolyte in lithium ion batteries (LIBs). As such, understanding DEC combustion chemistry is imperative to improving chemical kinetic modeling of LIB fires. To this end, a comprehensive experimental study was conducted to collect ignition delay times, CO time histories, and laminar flame speeds during DEC combustion. Ignition delay times were collected using a heated shock tube at real fuel–air conditions for three equivalence ratios (ϕ = 0.5, 1.0, and 2.0) near atmospheric pressure and for temperatures between 1182 and 1406 K. Another shock tube was used to collect CO time histories using a laser absorption diagnostic. These experiments were conducted for the same equivalence ratios, but highly diluted in argon and helium (79.25% Ar + 20% He) at an average pressure of 1.27 atm and a temperature range of 1236–1669 K. Finally, a heated constant-volume vessel was used to collect laminar flame speeds of DEC at an initial temperature and pressure of 403 K and 1 atm, respectively, for equivalence ratios between 0.79 and 1.38. The results are compared with different mechanisms from the literature. Good agreement is seen for the ignition delay time and flame speed measurements. However, significant deviations are observed for the CO time histories. A detailed discussion of the chemical kinetics is presented to elucidate the important reactions and direct future modeling efforts. [ABSTRACT FROM AUTHOR]

To understand the effects of the chemical structure of two C5 alkene isomers on their combustion properties, and to highlight the major chemical reactions occurring during their high‐temperature oxidation, water time histories were measured behind reflected shock waves for the oxidation of 1‐pentene (C5H10‐1) and 3‐methyl‐1‐butene (3M1B) in 99.5% Ar. The experiments were carried out at three different equivalence ratios (φ = 0.5, 1.0, and 2.0) at pressures and temperatures ranging from 1.29 to 1.47 atm and 1 331 to 1 877 K, respectively. The H2O quantification extends the database for 1‐pentene and provides new insights for 3M1B. These unique results were used to validate and to develop a new detailed kinetics model. Numerical predictions are presented, and the new model was able to capture the results with suitable accuracy, with 3M1B being notably more reactive than C5H10‐1. Sensitivity and rate‐of‐production analyses were performed to help explain the results. Under the present conditions, the reactivity is rapidly initiated by molecular dissociation of a fraction of the pentene isomers. The initiation phase then induces H‐atom abstraction by active radicals (H, OH, O, HO2, and CH3) to first produce alkenyl C5H9 radicals (or an alkyl radical and an alkenyl radical by breaking a C─C bond) and subsequent, smaller fragments. The difference in terms of reactivity between the isomers is essentially due to the fact that 3M1B has one particularly weak tertiary allylic C─H bond, which allows for fast H‐atom abstraction compared with 1‐pentene. [ABSTRACT FROM AUTHOR]