Search

Ordered InAs quantum dot (QD) arrays have been obtained on pre-patterned GaAs (0 0 1) substrates by atomic force microscopy (AFM) local oxidation nanolithography. Prior to InAs molecular beam epitaxy (MBE) deposition, an ordered square array of nanoholes is formed at the GaAs pre-patterned surface following in situ etching with atomic hydrogen. A low substrate temperature is maintained during the whole process in order to avoid pattern smoothing. Our results show that the density and dimensions of the nanoholes on the GaAs surface determine InAs QD size, nucleation site and InAs dose necessary for their formation. As a function of the geometrical parameters of the nanohole array, we can obtain either ordered 2D arrays of separated QD, closely packed QD or localized areas for QD formation.

The interplay between ion beam modification techniques in the MeV range and the controlled generation of negatively charged nitrogen-vacancy (NV-) centers in nitrogen-doped synthetic diamond crystals is explored. An experimental approach employing both light (H+) and heavy (Br+6) ions was followed to assess their respective impacts on the creation of NV- centers, using different ion energies or fluences to generate varying amounts of vacancies. Photoluminescence spectroscopy was applied to characterize NV- and neutral NV0 centers. Initially, no NV centers were detected post-irradiation, despite the presence of substitutional nitrogen and vacancies. However, after annealing at 800C (and in some cases at 900C), most samples exhibited a high density of NV0 and especially NV- centers. This demonstrates that thermal treatment is essential for vacancy-nitrogen recombination and NV- formation, often through electron capture from nearby nitrogen atoms. Notably, we achieved high NV- densities without graphitization, which is essential for preserving the material's properties for quantum applications. This study underscores and quantifies the effectiveness of MeV-range ions in controlling vacancy distributions and highlights their potential for optimizing NV- center formation to enhance the sensitivity of diamond-based quantum magnetic sensors., Comment: 21 pages, 10 figures, 3 tables

Nuclear spins are candidates to encode qubits or qudits due to their isolation from magnetic noise and potentially long coherence times. However, their weak coupling to external stimuli makes them hard to integrate into circuit-QED architectures, the leading technology for solid-state quantum processors. Here, we study the coupling of $^{173}$Yb(III) nuclear spin states in an [Yb(trensal)] molecule to superconducting cavities. Experiments have been performed on magnetically diluted single crystals placed on the inductors of lumped-element $LC$ superconducting resonators with characteristic frequencies spanning the range of nuclear and electronic spin transitions. We achieve a high cooperative coupling to all electronic and most nuclear [$^{173}$Yb(trensal)] spin transitions. This result is a big leap towards the implementation of qudit protocols with molecular spins using a hybrid architecture., Comment: 8 pages, 5 figures, 66 references, supplemental information (14 pages, 12 figures)

We report on a controlled method to fabricate in-situ a superconducting (SC) nanostructure at the apex of the standard W tip of a Scanning Tunnelling Microscope (STM) by pulsing the tunnelling voltage on a graphene covered metal surface. We have characterized the SC properties of the resulting tip as a function of temperature and magnetic field, obtaining a transition temperature of 3.3 K and a critical field well above 3T. The SC nanotip is robust, stable, and achieves atomic resolution. The non-SC tip can be easily recovered by controlled voltage pulsing on a clean metal surface. The present result should be taken into account when studying zero-bias features like Kondo resonances or superconductivity on graphene-based systems by means of STM using tungsten tips.

Hybridisation is a powerful strategy towards the next generation of multifunctional materials for environmental and sustainable energy applications. Here, we report a new inorganic nanocarbon hybrid material prepared with atomically controlled deposition of a monocrystalline TiO2 layer that conformally coats a macroscopic carbon nanotube (CNT) fiber. Through X-ray diffraction, Raman spectroscopy and photoemission spectroscopy we detect the formation of a covalent Ti-O-C bond at the TiO2/CNT interface and a residual strain of approximately 0.7-2 \%, which is tensile in TiO2 and compressive in the CNT. It arises after deposition of the amorphous oxide onto the CNT surface previously functionalized by the oxygen plasma used in ALD. These features are observed in samples of different TiO2 thickness, in the range from 10 to 80 nm. Ultraviolet photoemission spectroscopy on a 20 nm-thick TiO2 coated sample gives a work function of 4.27 eV, between that of TiO2 (4.23 eV) and the CNT fiber (4.41 eV), and the presence of new interband gap states that shift the valence band maximum to 1.05 eV below the Fermi level. Photoelectrochemical measurements demonstrate electron transfer from TiO2 to the CNT fiber network under UV irradiation. Electrochemical impedance spectroscopy measurements reveal a low resistance for charge transfer and transport, as well as a large capacitance. Our results point to the fact that these hybrids, in which each phase has nanometric thickness and the current collector is integrated into the material, are very different from conventional electrodes and can provide a number of superior properties.

We have designed, fabricated and tested a robust superconducting ratchet device based on topologically frustrated spin-ice nanomagnets. The device is made of a magnetic Co honeycomb array embedded in a superconducting Nb film. This device is based on three simple mechanisms: i) the topology of the Co honeycomb array frustrates in-plane magnetic configurations in the array yielding a distribution of magnetic charges which can be ordered or disordered with in-plane magnetic fields, following spin-ice rules, ii) the local vertex magnetization, which consists of a magnetic half vortex with two charged magnetic N\'eel walls, iii) the interaction between superconducting vortices and the asymmetric potentials provided by the N\'eel walls. The combination of these elements leads to a superconducting ratchet effect. Thus, superconducting vortices driven by alternating forces and moving on magnetic half vortices generate a unidirectional net vortex flow. This ratchet effect is independent of the distribution of magnetic charges in the array., Comment: 17 pages, 7 figures

We have studied two nanomagnet systems with strong (Co/Pd multilayers) and weak (NdCo alloy films) stray magnetic fields by probing the out-of-plane magnetic states with superconducting vortices. The hybrid samples are made of array of nanomagnets embedded in superconducting Nb thin films. The vortex motion detects relevant magnetic state features, since superconducting vortices are able to discriminate between different magnetic stray field strengths and directions. The usual matching effect between the superconducting vortex lattice and the periodic pinning array can be quenched by means of disorder magnetic potentials with strong stray fields at random. Ordered stray fields retrieve the matching effect and yield asymmetry and shift in the vortex dissipation signal. Furthermore vortices can discriminate the sizes of the nanomagnet magnetic domains, detecting magnetic domain sizes as small as 70 nm. In addition, we observe that the vortex cores play the crucial role instead of the supercurrents around the vortex., Comment: 22 pages, 8 figures

Smectic order has been generated in superconducting Nb films with two-fold symmetry arrays of symmetric pinning centers. Magnetic fields applied perpendicularly to the films develop a vortex matter smectic phase that is easily detected when the vortices commensurate with the pinning center array. The smectic phase can be turned on and off with external parameters., Comment: 15 pages, 5 figures

We present a simple nanodevice that can operate in two modes: i) three-state memory and ii) reading device. The nanodevice is fabricated with an array of ordered triangular-shaped nanomagnets embedded in a superconducting thin film. The input signal is ac current and the output signal is dc voltage. Vortex ratchet effect in combination with out of plane magnetic anisotropy of the nanomagnets is the background physics which governs the nanodevice performance., Comment: 10 pages, 4 figures

Long distance (1.4 micron) interaction of two different InAs/GaAs quantum dots in a photonic crystal microcavity is observed. Resonant optical excitation in the p-state of any of the quantum dots, results in an increase of the s-state emission of both quantum dots and the cavity mode. The cavity-mediated coupling can be controlled by varying the excitation intensity. These results represent an experimental step towards the realization of quantum logic operations using distant solid state qubits., Comment: 16 pages, 4 figures

The fine structure of the neutral exciton in a single self assembled InGaAs quantum dot is investigated under the effect of a lateral electric field. Stark shifts up to 1.5 meV, an increase in linewidth, and a decrease in photoluminescence intensity were observed due to the electric field. We show that the lateral electric field strongly affects the exciton fine structure splitting due to active manipulation of the single particle wave-functions. Remarkably, the splitting can be tuned over large values and through zero., Comment: 4 pages, 5 figures