Search

In this work, we propose a Deep neural network-assisted Particle Filter-based (DePF) approach to address the Mobile User (MU) joint synchronization and localization (sync\&loc) problem in ultra dense networks. In particular, DePF deploys an asymmetric time-stamp exchange mechanism between the MUs and the Access Points (APs), which, traditionally, provides us with information about the MUs' clock offset and skew. However, information about the distance between an AP and an MU is also intrinsic to the propagation delay experienced by exchanged time-stamps. In addition, to estimate the angle of arrival of the received synchronization packet, DePF draws on the multiple signal classification algorithm that is fed by Channel Impulse Response (CIR) experienced by the sync packets. The CIR is also leveraged on to determine the link condition, i.e. Line-of-Sight (LoS) or Non-LoS. Finally, to perform joint sync\&loc, DePF capitalizes on particle Gaussian mixtures that allow for a hybrid particle-based and parametric Bayesian Recursive Filtering (BRF) fusion of the aforementioned pieces of information and thus jointly estimate the position and clock parameters of the MUs. The simulation results verifies the superiority of the proposed algorithm over the state-of-the-art schemes, especially that of Extended Kalman filter- and linearized BRF-based joint sync\&loc. In particular, only drawing on the synchronization time-stamp exchange and CIRs, for 90$\%$of the cases, the absolute position and clock offset estimation error remain below 1 meter and 2 nanoseconds, respectively.

In this work, we study the joint synchronization and localization (sync&loc) of Mobile Nodes (MNs) in ultra dense networks. In particular, we deploy an asymmetric timestamp exchange mechanism between MNs and Access Nodes (ANs), that, traditionally, provides us with information about the MNs' clock offset and skew. However, information about the distance between an AN and a MN is also intrinsic to the propagation delay experienced by exchanged time-stamps. In addition, we utilize Angle of Arrival (AoA) estimation to determine the incoming direction of time-stamp exchange packets, which gives further information about the MNs' location. Finally, we employ Bayesian Recursive Filtering (BRF) to combine the aforementioned pieces of information and jointly estimate the position and clock parameters of MNs. The simulation results indicate that the Root Mean Square Errors (RMSEs) of position and clock offset estimation are kept below 1 meter and 1 ns, respectively., Comment: IEEE International Symposium on Networks, Computers and Communications (ISNCC 2020)

In this work, we propose a hybrid Bayesian approach towards clock offset and skew estimation, thereby synchronizing large scale networks. In particular, we demonstrate the advantage of Bayesian Recursive Filtering (BRF) in alleviating time-stamping errors for pairwise synchronization. Moreover, we indicate the benefit of Factor Graph (FG), along with Belief Propagation (BP) algorithm in achieving high precision end-to-end network synchronization. Finally, we reveal the merit of hybrid synchronization, where a large-scale network is divided into local synchronization domains, for each of which a suitable synchronization algorithm (BP- or BRF-based) is utilized. The simulation results show that, despite the simplifications in the hybrid approach, the Root Mean Square Errors (RMSEs) of clock offset and skew estimation remain below 5 ns and 0.3 ppm, respectively., Comment: arXiv admin note: text overlap with arXiv:2002.12660

In this paper, we obtain and study typical beam entropy values for millimetre wave (mm-wave) channel models using the NYUSIM simulator for frequencies up to 100 GHz for fifth generation (5G) and beyond 5G cellular communication systems. The beam entropy is used to quantify sparse MIMO channel randomness in beamspace. Lower relative beam entropy channels are suitable for memory-assisted statistically-ranked (MarS) and hybrid radio frequency (RF) beam training algorithms. High beam entropies can potentially be advantageous for low overhead secured radio communications by generating cryptographic keys based on channel randomness in beamspace, especially for sparse multiple input multiple output (MIMO) channels. Urban micro (UMi), urban macro (UMa) and rural macro (RMa) cellular scenarios have been investigated in this work for 28, 60, 73 and 100 GHz., Comment: Under peer-review for IEEE VTC Fall 2019

This paper presents a novel radio frequency (RF) beam training algorithm for sparse multiple input multiple output (MIMO) channels using unitary RF beamforming codebooks at transmitter (Tx) and receiver (Rx). The algorithm leverages statistical knowledge from past beam data for expedited beam search with statistically-minimal training overheads. Beams are tested in the order of their ranks based on their probabilities for providing a communication link. For low beam entropy scenarios, statistically-ranked beam search performs excellent in reducing the average number of beam tests per Tx-Rx beam pair identification for a communication link. For high beam entropy cases, a hybrid algorithm involving both memory-assisted statistically-ranked (MarS) beam search and multi-level (ML) beam search is also proposed. Savings in training overheads increase with decrease in beam entropy and increase in MIMO channel dimensions., Comment: Under peer-review for IEEE Globecom 2019

Terahertz spectrum is being researched upon to provide ultra-high throughput radio links for indoor applications, e.g., virtual reality (VR), etc. as well as outdoor applications, e.g., backhaul links, etc. This paper investigates a monopulse-based beam tracking approach for limited mobility users relying on sparse massive multiple input multiple output (MIMO) wireless channels. Owing to the sparsity, beamforming is realized using digitally-controlled radio frequency (RF) / intermediate-frequency (IF) phase shifters with constant amplitude constraint for transmit power compliance. A monopulse-based beam tracking technique, using received signal strength indi-cation (RSSI) is adopted to avoid feedback overheads for obvious reasons of efficacy and resource savings. The Matlab implementation of the beam tracking algorithm is also reported. This Matlab implementation has been kept as general purpose as possible using functions wherein the channel, beamforming codebooks, monopulse comparator, etc. can easily be updated for specific requirements and with minimum code amendments., Comment: 24th ITG Fachtagung Mobilkommunikation Technologien und Anwendungen Osnabruck, Germany, May 2019, pp. 10-13

Measurement results for millimeter wave LOS MIMO systems are presented with a focus on time variation and multipath propagation. Different system setups are used, including 2x2 and 3x3 MIMO, and involving different synchronization procedures and front-ends. Furthermore, different propagation scenarios are evaluated, covering a wide area of applications. The results show that the LOS component carries significantly more power than the NLOS components, and that frequency selectivity from front-ends should be taken into account when designing these high bandwidth systems. Frequency offsets and other phase variations due to transmit and receive oscillator differences are treated as part of the channel and thus, depending on the synchronization setup, the MIMO system exhibits different time variations, particularly in the case of independent local oscillators. It is also observed that these systems experience significant non-trivial long-term variations in terms of amplitude and phase., Comment: Accepted at WSA 2018

In this paper we present measurement results for pure line-of-sight MIMO links operating in the millimeter wave range. We show that the estimated condition numbers and capacities of the measured channels are in good agreement with the theory for various transmission distances and antenna setups. Furthermore, the results show that orthogonal channel vectors can be observed if the spacing criterion is fulfilled, thus facilitating spatial multiplexing and achieving high spectral efficiencies even over fairly long distances. Spacings generating ill-conditioned channel matrices show on the other hand significantly reduced performance., Comment: Accepted at IEEE WCNC 2017