Search

Finite element (FE) models of long bones are widely used to analyze implant designs. Experimental validation has been used to examine the accuracy of FE models of cadaveric femurs; however, although convergence tests have been carried out, no FE models of an intact and implanted human cadaveric tibia have been validated using a range of experimental loading conditions. The aim of the current study was to create FE models of a human cadaveric tibia, both intact and implanted with a unicompartmental knee replacement, and to validate the models against results obtained from a comprehensive set of experiments. Seventeen strain rosettes were attached to a human cadaveric tibia. Surface strains and displacements were measured under 17 loading conditions, which consisted of axial, torsional, and bending loads. The tibia was tested both before and after implantation of the knee replacement. FE models were created based on computed tomography (CT) scans of the cadaveric tibia. The models consisted often-node tetrahedral elements and used 600 material properties derived from the CT scans. The experiments were simulated on the models and the results compared to experimental results. Experimental strain measurements were highly repeatable and the measured stiffnesses compared well to published results. For the intact tibia under axial loading, the regression line through a plot of strains predicted by the FE model versus experimentally measured strains had a slope of 1.15, an intercept of 5.5 microstrain, and an [R.sup.2] value of 0.98. For the implanted tibia, the comparable regression line had a slope of 1.25, an intercept of 12.3 microstrain, and an [R.sup.2] value of 0.97. The root mean square errors were 6.0% and 8.8% for the intact and implanted models under axial loads, respectively. The model produced by the current study provides a tool for simulating mechanical test conditions on a human tibia. This has considerable value in reducing the costs of physical testing by pre-selecting the most appropriate test conditions or most favorable prosthetic designs for final mechanical testing. It can also be used to gain insight into the results of physical testing, by allowing the prediction of those variables difficult or impossible to measure directly. Keywords: human tibia bone, experimental validation, validated FE model of implanted tibia, finite element analysis, tibial metaphysis, Oxford knee

We combined mobile biplane X‐ray imaging and magnetic resonance imaging to measure the regions of articular cartilage contact and cartilage thickness at the tibiofemoral and patellofemoral joints during six functional activities: standing, level walking, downhill walking, stair ascent, stair descent, and open‐chain (non‐weight‐bearing) knee flexion. The contact centers traced similar paths on the medial and lateral femoral condyles, femoral trochlea, and patellar facet in all activities while their locations on the tibial plateau were more varied. The translations of the contact centers on the femur and patella were tightly coupled to the tibiofemoral flexion angle in all activities (r2 > 0.95) whereas those on the tibia were only moderately related to the flexion angle (r2 > 0.62). The regions of contacting cartilage were significantly thicker than the regions of non‐contacting cartilage on the patella, femoral trochlea, and the medial and lateral tibial plateaus in all activities (p < 0.001). There were no significant differences in thickness between contacting and non‐contacting cartilage on the medial and lateral femoral condyles in all activities, except open‐chain knee flexion. Our results provide partial support for the proposition that cartilage thickness is adapted to joint load and do not exclude the possibility that other factors, such as joint congruence, also play a role in regulating the structure and organization of healthy cartilage. The data obtained in this study may serve as a guide when evaluating articular contact motion in osteoarthritic and reconstructed knees. [ABSTRACT FROM AUTHOR]

Background: The role of testosterone in maintaining functional performance in older men remains uncertain.Methods: We conducted a 12-month prospective, observational case-control study including 34 men newly commencing androgen deprivation therapy for prostate cancer and 29 age-matched prostate cancer controls. Video-based motion capture and ground reaction force data combined with computational musculoskeletal modeling, and data were analyzed with a linear mixed model.Results: Compared with controls over 12 months, men receiving androgen deprivation therapy had a mean reduction in circulating testosterone from 14.1 nmol/L to 0.4 nmol/L, associated with reductions in peak knee extension torque, mean adjusted difference (MAD) -0.07 Nm/kg (95% confidence interval [CI]: -0.18, 0.04), p = .009, with a corresponding more marked decrease in quadriceps force MAD -0.11 × body weight (BW) [-0.27, 0.06], p = .045 (equating to a 9 kg force reduction for the mean body weight of 85 kg), and decreased maximal contribution of quadriceps to upward propulsion, MAD -0.47 m/s2 [-0.95, 0.02], p = .009. We observed between-group differences in several other parameters, including increased gluteus maximus force in men receiving androgen deprivation therapy, MAD 0.11 × BW [0.02, 0.20], p = .043, which may be compensatory.Conclusions: Severe testosterone deprivation over 12 months is associated with selective deficits in lower-limb function evident with an important task of daily living. [ABSTRACT FROM AUTHOR]

ABSTRACT No data are available to describe six-degree-of-freedom (6-DOF) knee-joint kinematics for one complete cycle of overground walking following total knee arthroplasty (TKA). The aims of this study were firstly, to measure 6-DOF knee-joint kinematics and condylar motion for overground walking following TKA; and secondly, to determine whether such data differed between overground and treadmill gait when participants walked at the same speed during both tasks. A unique mobile biplane X-ray imaging system enabled accurate measurement of 6-DOF TKA knee kinematics during overground walking by simultaneously tracking and imaging the joint. The largest rotations occurred for flexion-extension and internal-external rotation whereas the largest translations were associated with joint distraction and anterior-posterior drawer. Strong associations were found between flexion-extension and adduction-abduction ( R2 = 0.92), joint distraction ( R2 = 1.00), and anterior-posterior translation ( R2 = 0.77), providing evidence of kinematic coupling in the TKA knee. Although the measured kinematic profiles for overground walking were grossly similar to those for treadmill walking, several statistically significant differences were observed between the two conditions with respect to temporo-spatial parameters, 6-DOF knee-joint kinematics, and condylar contact locations and sliding. Thus, caution is advised when making recommendations regarding knee implant performance based on treadmill-measured knee-joint kinematic data. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:1634-1643, 2017. [ABSTRACT FROM AUTHOR]