Search

Three patients with multiple Miller Class III recession defects with substantial bone loss were treated with hard tissue augmentation with the goal to prevent future recessions. The surgery involved a full-thickness mucoperiosteal coronally advanced flap, bone grafting, and primary flap closure. Freeze-dried bone allograft (FDBA) in combination with plasma rich in growth factors (PRGF) was grafted during the procedure. After more than 6 months, the treated sites showed soft tissue maturation and esthetic tissue blending. Clinically, an increase in convexity of alveolar ridge and soft tissue was observed, as well as a marked reduction in recession depth and gain in width of keratinized mucosa. Cone beam computed tomography showed a gain in buccal bone thickness. The use of FDBA in combination with PRGF appears to have potential for the treatment of Miller Class III defects by providing improved hard and soft tissue profiles. [ABSTRACT FROM AUTHOR]

The coronal advancement of surgical flaps and subsequent shift of the mucogingival junction during bone augmentation procedures are common. These mucogingival alterations may become a challenge to manage in the maxillary anterior region among patients with a high lip line upon smiling or high esthetic demands. To further complicate matters, the presence of physiologic gingival pigmentation in the esthetic zone creates challenges of its own. In this case, a free gingival graft from the buccal gingiva of the maxillary molars was used to correct the mucogingival deformity created from a guided bone regeneration procedure. [ABSTRACT FROM AUTHOR]

Purpose: The aim of this study was to evaluate the efficacy and morbidity of two periodontal releasing incision techniques in vertical ridge augmentation. Materials and Methods: Twenty-three vertical and horizontal defects (Seibert Class III) were selected to compare the double-flap incision (DFI) to the conventional periosteal releasing incision (PRI). An incision technique was randomly assigned for flap advancement. The amount of flap advancement, the incidence of postsurgical complications, and the level of patient discomfort were compared. Flap advancement was measured with a UNC-15 probe as the difference between the initial elevated flap and the final advanced flap. Postsurgical complications including premature membrane exposure, infection, paresthesia, and continuous discomfort were noted at follow-up visits. A visual analog scale (VAS) was used to quantify the amount of pain, swelling, and bleeding in the patients. Results: An average of 9.64 ± 0.92 mm flap advancement was accomplished for DFI, whereas PRI advancement averaged 7.13 ± 1.45 mm (P < .001). Premature membrane exposures occurred in two sites in the PRI group and one site in the DFI group. Paresthesia, infection, and continuous discomfort were noted in one site each in the PRI group. The difference between groups in the incidence of postoperative complications (PRI, 5; DFI, 1) was not significant (P < .082). The mean pain, swelling, and bleeding scores for DFI (1.55 ± 1.21, 1.91 ± 0.94, and 0.40 ± 0.12, respectively) were lower than those of the PRI group (3.75 ± 2.63, 3.25 ± 1.29, and 1.16 ± 0.34, respectively) (P = .019, P = .010, and P = .061, respectively). Conclusions: Flap advancement was facilitated and morbidity was decreased in the DFI group. The technique may have potential to serve as an alternative to PRI to overcome some of the latter's limitations. [ABSTRACT FROM AUTHOR]

The purpose of this study was to objectively define and quantify triangular, square, and square/tapered maxillary central incisors. In this study, the shape of maxillary central incisor crowns was investigated in 100 healthy individuals. The results showed that when the contact surface/crown length ratio is less than 43%, the tooth is triangular in shape; when the ratio is more than 57%, the tooth is square in shape; and when the ratio is between 43% and 57%, the tooth is defined as square/tapered. Since it has been shown that the morphologiccharacteristics of the gingiva and periodontium are partly related to the shape of the teeth, a means of truly defining the shapes of the incisors is now available. This is significant in predicting esthetics, bone volume, and susceptibility to recession, pocketing in the natural dentition, and ridge shrinkage for prosthetic tooth replacement. [ABSTRACT FROM AUTHOR]

The purposes of this prospective, randomized, controlled clinical investigation were to evaluate the performance of motorized ridge expanders (MREs) and to compare their results with those achieved using lateral ridge augmentation (LRA). Eight subjects with bilateral ridge deformities were selected. One technique was used on the right side and the other on the left. Implants were placed 6 months after bone augmentation procedures. All measurements were recorded at 2 and 5 mm from the most coronal aspect of the crest. The augmentation achieved with both techniques was statistically significant: 1.2 mm for LRA and 1.5 mm for MRE 2 mm from the crest and 1.5 mm for LRA and 1.6 mm for MRE at 5 mm from the crest. The differences between the two techniques were statistically insignificant. The amount of expansion achieved in the MRE sites appeared to be negatively correlated with the thickness of the cancellous bone (P < .05), and it was not affected by the thickness of the cortical plate. The MRE technique appears to be as effective as the LRA technique in augmenting the thickness of atrophic ridges. Defects treated with MREs showed less bone width contraction during the first 6 months of healing. [ABSTRACT FROM AUTHOR]

Crown width/length ratios have been considered an important aspect in the esthetic zone. Because previous investigations focused on Caucasian populations, limited information is available on other ethnic groups to propose a comprehensive approach to anterior maxillary teeth. The purpose of this study was to analyze the dimensions of anatomical crowns of maxillary anterior tooth groups with respect to width, length, and width/length ratios among an Asian population. The tooth dimensions presented in this investigation may serve as guidelines for treatment planning in restorative dentistry and periodontal surgery for this particular ethnic group. [ABSTRACT FROM AUTHOR]

The aim of this report is to present a new treatment strategy for gingival recession. The use of platelet concentrate gel in a collagen sponge carrier combined with a bioabsorbable membrane and coronally advanced flap procedure is demonstrated in two patients. In both patients, the recession defects treated were equal to or greater than 2 mm. Complete root coverage was achieved in both cases. The patients were satisfied with the esthetic result and appreciated the excellent soft tissue contour and texture. This technique requires further investigation. [ABSTRACT FROM AUTHOR]

Purpose: The primary aims of this retrospective study were to: (1) evaluate bone quality in different segments of the edentulous jaw and correlate it with demographic data and (2) establish a quantitative and objective assessment of bone quality based on the Hounsfield scale. Materials and Methods: One hundred one randomly selected computerized tomographic (CT) scans were used for the analysis. Edentulous segments ranging from 10 to 30 mm were selected for evaluation, and the findings were analyzed and correlated to demographics. Implant recipient sites were evaluated visually for bone classification by 2 independent examiners. The same sites were subsequently evaluated digitally using the Hounsfield scale, and the results were correlated with the visual classification. Results: The 4 quadrants of the mouth displayed Hounsfield unit (HU) values ranging from -240 HU to 1159 HU. The highest unit/mean density value (559 ± 208 HU) was found in the anterior mandible, followed by 517 ± 177 HU for the anterior maxilla, 333 ± 199 HU for the posterior maxilla, and 321 ± 132 HU for the posterior mandible. There was no association between the Hounsfield value and density and age or gender. When subjective bone quality was correlated to Hounsfield index findings, only the relationship between HU and type 4 bone was found to be significant. Conclusions: Knowledge of the Hounsfield value as a quantitative measurement of bone density can be helpful as a diagnostic tool. It can provide the implant surgeon with an objective assessment of bone density, which could result in modification of surgical techniques or extended healing time, especially in situations where poor bone quality is suspected. [ABSTRACT FROM AUTHOR]

The goal of this report is to present a novel treatment strategy for mucogingival defects. The use of platelet concentrate gel in a collagen sponge carrier, combined with a coronally positioned flap procedure, is presented in two cases. Complete root coverage was achieved in both cases. Optimal esthetic results, with excellent soft tissue contour and texture, were observed. The patients were satisfied with the appearance. This technique warrants further investigation. [ABSTRACT FROM AUTHOR]

Implant placement in the posterior maxilla often requires elevation of the sinus floor, which can be achieved through either the modified Caldwell-Luc or the crestal osteotome technique. The objectives of this study were to evaluate (a) the resistance to perforation of maxillary sinus membranes obtained from formaldehyde-fixed cadavers in vitro, (b) the frequency and extent of membrane perforations occurring after sinus floor elevation in cadavers using the crestal approach, and (c) the amount of membrane elevation (doming) that can be achieved using the crestal approach. Pretreatment of maxillary sinus membrane tissues with commonly used tissue softeners did not have a statistically significant effect on resistance to perforation. Maxillary sinus membranes were elevated 4 to 8 mm in formaldehyde-fixed cadavers using the osteotome technique; implants were placed. Of the 25 sites that received implants, only 6 showed perforations, as assessed by double-blind investigation after dissection of the lateral wall of the nose, allowing direct examination of the sinus cavity. Perforations were categorized as Class I (⩽ 2 mm with exposure of the implant into the sinus cavity and loss of doming); Class II perforations (⩾ 2 mm) were associated with proximity of the osteotomy site to the medial wall of the sinus or the presence of septae. These results indicated that the crestal osteotome approach compared favorably to the modified Caldwell-Luc technique as it relates to the frequency of maxillary sinus membrane perforations and the degree of achievable membrane elevation. [ABSTRACT FROM AUTHOR]

Abstract: Periodontal health is defined by absence of clinically detectable inflammation. There is a biological level of immune surveillance that is consistent with clinical gingival health and homeostasis. Clinical gingival health may be found in a periodontium that is intact, i.e. without clinical attachment loss or bone loss, and on a reduced periodontium in either a non‐periodontitis patient (e.g. in patients with some form of gingival recession or following crown lengthening surgery) or in a patient with a history of periodontitis who is currently periodontally stable. Clinical gingival health can be restored following treatment of gingivitis and periodontitis. However, the treated and stable periodontitis patient with current gingival health remains at increased risk of recurrent periodontitis, and accordingly, must be closely monitored. Two broad categories of gingival diseases include non‐dental plaque biofilm–induced gingival diseases and dental plaque‐induced gingivitis. Non‐dental plaque biofilm‐induced gingival diseases include a variety of conditions that are not caused by plaque and usually do not resolve following plaque removal. Such lesions may be manifestations of a systemic condition or may be localized to the oral cavity. Dental plaque‐induced gingivitis has a variety of clinical signs and symptoms, and both local predisposing factors and systemic modifying factors can affect its extent, severity, and progression. Dental plaque‐induced gingivitis may arise on an intact periodontium or on a reduced periodontium in either a non‐periodontitis patient or in a currently stable “periodontitis patient” i.e. successfully treated, in whom clinical inflammation has been eliminated (or substantially reduced). A periodontitis patient with gingival inflammation remains a periodontitis patient (Figure 1), and comprehensive risk assessment and management are imperative to ensure early prevention and/or treatment of recurrent/progressive periodontitis. Precision dental medicine defines a patient‐centered approach to care, and therefore, creates differences in the way in which a “case” of gingival health or gingivitis is defined for clinical practice as opposed to epidemiologically in population prevalence surveys. Thus, case definitions of gingival health and gingivitis are presented for both purposes. While gingival health and gingivitis have many clinical features, case definitions are primarily predicated on presence or absence of bleeding on probing. Here we classify gingival health and gingival diseases/conditions, along with a summary table of diagnostic features for defining health and gingivitis in various clinical situations. [ABSTRACT FROM AUTHOR]

The article discusses guidelines for diagnosis of periodontal disease and the 2017 World Workshop on Periodontal Disease Classification. The author reflects on the impact of classification systems on prognosis, treatments, and reduction of excessive examination. Other topics include the development of implant dentistry, the oral symptoms of systemic diseases, and the identification of gingival diseases.

The study compared a novel trap door (TD) technique with the triangular distal wedge (TW) procedure for the elimination of distal periodontal pockets adjacent to edentulous areas. Thirteen patients with suprabony pockets ≥ 5 mm at the distal surface of terminal molars bilaterally were included in this prospective, single-blinded, randomized clinical trial using a split-mouth design. The authors demonstrated the efficacy of an alternative TD technique in the elimination of the distal pockets adjacent to the terminal molars.

Crown width/length ratios have been considered an important aspect in the esthetic zone. Because previous investigations focused on Caucasian populations, limited information is available on other ethnic groups to propose a comprehensive approach to anterior maxillary teeth. The purpose of this study was to analyze the dimensions of anatomical crowns of maxillary anterior tooth groups with respect to width, length, and width/length ratios among an Asian population. The tooth dimensions presented in this investigation may serve as guidelines for treatment planning in restorative dentistry and periodontal surgery for this particular ethnic group.

Amalgam tattoos in the gingiva and mucosa can interfere with esthetics and present a barrier to surface-to-bone contact at implant sites. Two clinical cases are used to illustrate the effectiveness of acellular dermal matrix allografts in the treatment of these lesions. Very esthetic results were obtained with minimal discomfort and postoperative complications because of the prevention of a second surgical site or additional procedure.

The use of acellular dermal matrix to correct soft and hard tissue defects involving implants is described through three case reports. Correction of a ridge deformity caused by a root fracture, submerging of an existing implant and correction of recession defects around adjacent teeth, and ridge preservation for implant placement are presented. The use of acellular dermal matrix prevented the need for a second surgical site for donor material and the possible attendant postoperative complications. It also enhanced patient comfort and satisfaction with the procedure. All three cases demonstrated excellent functional and esthetic results for both the patients and professionals involved in the therapy.