Search

Nowadays, thanks to the hardware costs reduction everyone at home owns at least one hi-technology devices to support life quality. This paper proposes a new methodology to analyse the indoor air quality with a cheap and third-age-dedicated device. A new prototype, called Home Pollution Embedded System (HOPES), was developed to give simple and understandable information, also comprehensible for people with cognitive problems or that are not familiar with new technologies. The device gathers pollutants data and displays to the user different air pollutants concentrations, from toxics gasses up to explosives. Moreover, an overall air quality index has been elaborated and is displayed by HOPES with lights and numerical information. HOPES is an Internet of things device that works in real time and that can be connected to the web and to a geographic information system platform to add spatial information of each pollutant. The hardware architecture employs a set of gas semiconductor sensors and an IR particulate matter sensor. Experimental results demonstrated that HOPES has an accurate sensor response and is suitable to be used with the proposed indices. In fact, despite of the poor-selective metal oxide sensors, the results highlighted how it is possible to get useful air quality information with a cheap device. However, the system needs more tests to validate the sensors array with different substances. [ABSTRACT FROM AUTHOR]

Space exploration beyond the Low Earth Orbit requires the establishment of Bioregenerative Life Support Systems (BLSSs), which, through bioprocesses for primary resource recycling, ensure crew survival. However, the introduction of new organisms in confined space habitats must be carefully evaluated in advance to avoid unforeseen events that could compromise the mission. In this work, we have designed and built an experimental chamber, named Growing/Rearing Module (GRM), completely isolated and equipped with micro-environmental monitoring and control systems. This unit is specially intended for the study of single bioprocesses, which can be composed to design functional BLSSs. GRM can be implemented with specific devices for the biological system under study and the control of environmental parameters such as temperature, humidity, lighting and if required, pressure of gaseous components. GRM was validated in experiments of both microgreen cultivation, as a source of fresh food for astronauts, and rearing of the decomposer insect Hermetia illucens for bioconversion of organic waste. During the study of each bioprocess, the environmental and biological data were recorded, allowing to make preliminary assessments of the system efficiency. The GRM, as a completely confined environment, represents the first self-consistent unit that allows to fine-tune the optimal parameters for the operability of different bioprocesses. Furthermore, the upgradability according to the mission needs and the functional integrability of modules differently equipped are the keys to GRM versatility, representing a valuable tool for BLSSs' design., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Committee on Space Research (COSPAR). Published by Elsevier B.V. All rights reserved.)

The feasibility and design of the CultCube 12U CubeSat hosting a small Environmental Control and Life Support Systems (ECLSS) for the autonomous cultivation of a small plant in orbit is described. The satellite is aimed at running experiments in fruit plants growing for applications in crewed vehicles for long-term missions in space. CultCube is mainly composed of a pressurized vessel, constituting the outer shell of the ECLSS, and by various environmental controls (water, nutrients, air composition and pressure, light, etc.) aimed at maintaining a survivable habitat for the fruit plants to grow. The plant health status and growth performances is monitored using hyperspectral cameras installed within the vessel, able to sense leaves' chlorophyll content and temperature, and allowing the estimation of plant volume in all its life cycle phases. The paper study case is addressed to the in-orbit experimental cultivation of a dwarf tomato plant (MicroTom), which was modified for enhancing the anti-oxidants production and for growing in stressful environments. While simulated microgravity tests have been passed by the MicroTom plant, the organism behaviour in a real microgravity environment for a full seed-to-seed cycle needs to be tested. The CultCube 12U CubeSat mission presents no particular requirements on the kind of orbit, whereas its minimum significative duration corresponds to one seed-to-seed cycle for the plant, which is 90 days for the paper study case. In the paper, after an introduction on the importance of an autonomous testbed for plant cultivation, in the perspective of the implementation of bioregenerative systems on-board future manned long-term missions, the satellite design and the MicroTom engineered plant for in-orbit growth are described. In addition to the description of the whole set of subsystems, with focus on the payload and its controllers and instrumentation, the system budgets are presented. Finally, the first tests conducted by the authors are briefly reported., (Copyright © 2020 The Committee on Space Research (COSPAR). Published by Elsevier Ltd. All rights reserved.)

Solar Ultra-Violet (UV) radiation has positive and negative effects on human body tissues. Small doses of solar UV radiation are needed by the human skin for the activation of the vitamin D production. Overexposure to solar UV radiation can produce acute and long-term negative effects, such as sunburns and, in the worst cases, cataracts and skin cancers. For this reason, knowing the amount of UV doses received by people is essential to evaluate their risk to UV overexposure and to evaluate the adequate countermeasure to avoid the negative effects. The original contribution of the present study consists in having searched, collected, adapted and processed a series of technical information and analytical relations, developing an algorithm suitable for the calculation of the erythemal UV dose on sloped surfaces exposed to solar radiation, which at the moment is not present in the scientific literature. The results obtained by the algorithm have been compared to the results of a field measurements campaign, carried out in three different Italian sites. Results comparison indicated that measured and calculated values show a sufficient level of agreement, with a mean absolute error equal to 20%.

Occupational solar radiation exposure is a relevant heath risk in the fishing sector. Our aim was to provide a detailed evaluation of individual UV exposure in three different fishing activities in Italy, with personal UV dosimeters and a simple formula to calculate the fraction of ambient erythemal UV dose received by the workers. The potential individual UV exposure of the fishermen was between 65 and 542 Joules/m 2 . The percentages of the ambient exposure were estimated between 2.5% and 65.3%. Workers' UV exposure was mainly influenced by the characteristics of the work activity, the postures adopted, and the type of boats. Overall, our data showed that 43% of the daily measurements could result largely above the occupational limits of 1-1.3 standard erythemal dose (i.e., 100 Joules/m 2 ) per day, in case of exposure of uncovered skin areas. Measurements of individual UV exposure are important not only to assess the risk but also to increase workers' perception and stimulate the adoption of preventive measures to reduce solar UV risk. Furthermore, the simple method proposed, linking ambient erythemal UV dose to the workers' exposure, can be a promising tool for a reliable assessment of the UV risk, as time series of environmental UV dose are widely available.