Search

BACKGROUND: The tetrahydrofuran–ethanol azeotrope cannot be separated by common distillation, but can be effectively separated by extractive distillation. Extractive distillation can be simulated by Aspen Plus software. The minimum annual cost of the process can be calculated to assess ionic liquid separation ability. The interaction energy can be used to explain the separation mechanism. RESULTS: The non‐random two‐liquid model parameters of ternary mixtures for tetrahydrofuran and ethanol containing tributylmethylammonium acetate or 1‐octyl‐3‐methylimidazolium acetate were obtained. Thermodynamic property databases of tributylmethylammonium acetate, 1‐hexyl‐2,3‐dimethylimidazolium acetate and 1‐octyl‐3‐methylimidazolium acetate were established. Based on the thermodynamic model parameters and properties, the sequential iterative method was used to determine the best operating conditions and minimum total annual cost the of extractive distillation process. The interaction energy was calculated to explain the separation mechanism. CONCLUSIONS: The separation performance of tributylmethylammonium acetate is better than that of 1‐hexyl‐2,3‐dimethylimidazolium acetate or 1‐octyl‐3‐methylimidazolium acetate. The selection and design of the ionic liquids can be conducted in terms of the interaction energy. © 2023 Society of Chemical Industry (SCI). [ABSTRACT FROM AUTHOR]

The chemical formula of basic zinc chloride is Zn5(OH)8Cl2 · H2O (denoted as ZHC). It is a new type of zinc source additive, widely used in the feed industry. In this article, micron‐sized hexagonal flake ZHC with a diameter of 10–60 µm is directly prepared by ammonia precipitation method using ZnCl2 as raw material. The products are characterized and analyzed by X‐ray diffraction, scanning electron microscopy, and laser particle size analyzer. The effects of reaction temperature, ammonia flow rate, aging time, and reactant concentration on the product morphology are studied. Under the optimum reaction conditions, the ZnCl2 concentration is 2.0 mol L−1, NH3 flow rate is 300 mL min−1, the reaction time is 1 h, the reaction temperature is 80 °C, and the aging time is 5 h. Lastly, the yield reaches 49.06%. The growth habit of ZHC is theoretically analyzed by the Morphology program. The calculation results are in good agreement with the experimental results. The change of (003) crystal plane exposure caused by temperature is an important reason for the non‐ideality of macroscopic morphology. [ABSTRACT FROM AUTHOR]

BACKGROUND: The binary benzene–n‐propanol azeotrope can be formed in chemical production. Extractive distillation is an important azeotrope separation technology and an ionic liquid is a type of excellent entrainer. Aspen Plus software was used to simulate the extractive distillation process. The separation performance of ionic liquids was evaluated in terms of total annual cost of the extractive distillation process. The separation mechanism of the azeotrope was quantitatively explained using intermolecular interaction energy. RESULTS: The thermodynamic properties databases of 1‐octyl‐3‐methylimidazolium acetate, trioctylmethylammonium acetate and 1‐decyl‐3‐methylimidazolium acetate were established in Aspen Plus software. The extractive distillation process was established through combining the thermodynamic properties of the three ionic liquids and the vapor–liquid equilibrium data of benzene–n‐propanol–ionic liquid. The optimal operating conditions were obtained by minimizing the total annual cost of the separation process through a sequential iterative method. The interaction energy was calculated using density functional theory through Gaussian 09 software and used to explain the principle of the benzene–n‐propanol azeotropic system separation. CONCLUSIONS: 1‐Octyl‐3‐methylimidazolium acetate has the best separation performance among the three ionic liquids. The interaction energy can be used to screen and design ionic liquids in the process of benzene–n‐propanol extractive distillation separation. © 2021 Society of Chemical Industry (SCI). [ABSTRACT FROM AUTHOR]

A processusing plentiful and inexpensive caustic calcined magnesia(CCM; main component is MgO) to prepare lamellar MH of high purityis described. The process begins with the reaction of MgO in CCM withNH4NO3at ∼100 °C to produce ammoniagas and Mg(NO3)2solution and the subsequentfiltration of Mg(NO3)2solution to remove impurities(e.g., SiO2). Then, the obtained ammonia is introducedinto the Mg(NO3)2solution to produce MH precipitateand NH4NO3. After the MH precipitate is separatedby filtration, the filtrate containing NH4NO3is returned to the initial step. The overall reaction of this processis the hydration of MgO to MH. Therefore, this process is called theapparent-hydration method. This apparent-hydration method overcomesthe disadvantages of the true hydration method, such as the inabilityto remove impurities. A crucial finding is that, because of the presenceof trace SO42–in the obtained Mg(NO3)2solution, a MH product with a narrow particlesize distribution cannot be produced. After removal of the SO42–with Ba(NO3)2,lamellar MH with a narrow particle size distribution can be synthesizedat 120 °C in one step. This work provides a promising route tothe use of CCM to prepare MH. [ABSTRACT FROM AUTHOR]

Abstract: Through-porous steel fiber matrix with high specific surface area and self-support strength was examined as the support of TiO2 film photocatalyst. TiO2 was uniformly and conformally deposited onto the surface of the metal skeleton of the porous steel fiber matrix via atomic layer deposition method so that the porosity as well as gas permeability of the matrix is maintained. For further improving the photocatalytic activity, noble metals (Au and Pt/Pd alloy) were sputtered onto the surface of TiO2 photocatalyst. The photodegradation of methyl orange was used for evaluating the photocatalytic properties. The results show that compared with TiO2 films deposited on flat Si wafers, TiO2 films on the porous support display higher photocatalytic activities, owing to their higher specific surface areas. The photocatalytic activity of TiO2 on porous support was not enhanced by Au, while it was remarkably improved by Pt/Pd. The TiO2 photocatalysts were also analyzed by scanning electron microscopy and X-ray photoelectron spectroscopy. [Copyright &y& Elsevier]

Abstract: Polyaniline(PANi)/Fe3O4 nanocomposites have been prepared via in situ chemical oxidative polymerization directed with cationic surfactant cetyltrimethylammonium bromide (CTAB). The studies show that PANi can coat Fe3O4 nanoparticles. CTAB can produce insoluble substance with initiator of polyreaction, and plays a very important role for the coating of Fe3O4 nanoparticles by PANi. Many Fe3O4 nanoparticles are bald without being coated by PANi when CTAB is replaced by anionic surfactant, so anionic surfactant can not play the role of CTAB. [Copyright &y& Elsevier]