124 results on '"Guo, Rui-Fen"'
Search Results
2. Excellent strength-toughness combination of NiAl–30Cr composites with novel in situ composite microstructure containing NiAl matrix and Cr single-phase
3. Development of ceramic nanoparticles reinforced high Cr tool and die steels with high comprehensive performance
4. Influence of Si, Ti, and Cu as alloying elements on the wettability and reactivity of an Al/B4C system
5. Ultra-fast high-temperature synthesis and densification of high-entropy diborides and diboride-carbide ceramics
6. Cr3C2 assisted ultrafast high-temperature sintering of TiC
7. Ultrafast synthesis and pressureless densification of multicomponent nitride and carbonitride ceramics
8. Preparation and characterization of porcupine-fish-spine-inspired AZ91/SiC composites with radial lamellar structures
9. Preparation of laminated Al/B4C composites with gradient structures and properties through centrifugal freezing and pressure infiltration
10. Development of a nacre-like metal-ceramic composite with a brick-and-mortar structure and high ceramic content
11. Efficient synthesis and densification of MgAl2O4 ceramics: Combining reactive cold sintering with ultrafast high-temperature sintering
12. Ultrafast high-temperature sintering of lanthanum-chromite-based ceramics
13. Preparation of laminated Cr3C2/Cu composites by direct ink writing and pressureless infiltration
14. Lamellar and interpenetrated Al/(Al2O3–TiC) composites prepared by bidirectional freeze casting and melt infiltration
15. Construction of nacre-mimetic composites with a “brick-and-mortar” architecture based on structural defects in ice-templating
16. Bio-inspired lamellar hydroxyapatite/magnesium composites prepared by directional freezing and pressureless infiltration
17. Ultrafast densification of high-entropy oxide (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Zr2O7 by reactive flash sintering
18. Flash sintering of 3YSZ and in-situ joining with 304 stainless steel using copper as an interlayer
19. Ultrafast high-temperature sintering of bulk oxides
20. Role of Si in the wetting of TiC by Al
21. Exploiting bio-inspired high energy-absorbent metal/ceramic composites through emulsion-ice-templating and melt infiltration
22. Synthesis of damage-tolerant Cu-matrix composites with nacre-inspired laminate-reticular hierarchical architecture via tuning compositional wettability
23. Preparation and characterization of high damage-tolerance nacre-inspired magnesium alloy matrix composites with high carbon nanotube contents
24. Influence of matrix property and interfacial reaction on the mechanical performance and fracture mechanism of TiC reinforced Al matrix lamellar composites
25. Development of ceramic nanoparticles reinforced high Cr tool and die steels with high comprehensive performance
26. Electrically induced spreading of EGaIn on Cu substrate in an alkali solution under wetting and non-wetting conditions
27. A novel strategy for fabricating biomimetic gradient metal-ceramic composites by dynamic freeze casting and pressure infiltration
28. Optimization of the properties in Al/SiC composites by tailoring microstructure through gelatin freeze casting
29. The role of TiO2 incorporation in the preparation of B4C/Al laminated composites with high strength and toughness
30. Formation mechanism and control of a large-scale lamellar structure in freeze-cast Al2O3 ceramics under dual temperature gradients
31. Polarity effects on the wettability and interfacial chemistry at Cu–YSZ interface by applying a direct current
32. Effects of ceramic lamellae compactness and interfacial reaction on the mechanical properties of nacre-inspired Al/Al2O3–ZrO2 composites
33. High damage-tolerance bio-inspired ZL205A/SiC composites with a lamellar-interpenetrated structure
34. Ultrafast pressure sintering of B4C-based composites via direct Joule heating
35. Significant improvement in the wettability of ZrO2 by molten Al under the application of a direct current
36. Effects of oxide addition on the microstructure and mechanical properties of lamellar SiC scaffolds and Al–Si–Mg/SiC composites prepared by freeze casting and pressureless infiltration
37. Effects of composition and sintering temperature on the structure and compressive property of the lamellar Al2O3–ZrO2 scaffolds prepared by freeze casting
38. Effect of components on the microstructures and properties of rare-earth zirconate ceramics prepared by ultrafast high-throughput sintering
39. Role of Si in the wetting of TiC by Al
40. Flash Sintering of 3YSZ and In-Situ Joining with 304 Stainless Steel Using Copper as an Interlayer
41. Current-driven spontaneous infiltration of molten Al into a porous PSZ preform with a lamellar structure
42. The influence of surface orientation on the wetting and reaction at the Al/MgAl2O4 interfaces.
43. Al–7Si–5Cu/Al 2 O 3 –ZrO 2 Laminated Composites with Excellent and Anisotropic Wear Resistance
44. Formation mechanism and control of a large-scale lamellar structure in freeze-cast Al 2 O 3 ceramics under dual temperature gradients
45. Electrochemically-driven direct joining of Ni and ZrO2
46. High compressive strength in nacre-inspired Al−7Si−5Cu/Al 2 O 3 –ZrO 2 composites at room and elevated temperatures by regulating interfacial reaction
47. Developing high toughness and strength Al/TiC composites using ice-templating and pressure infiltration
48. Lamellar-interpenetrated Al−Si−Mg/Al2O3−ZrO2 composites prepared by freeze casting and pressureless infiltration
49. Processing and mechanical properties of lamellar-structured Al–7Si–5Cu/TiC composites
50. High compressive strength in nacre-inspired Al−7Si−5Cu/Al2O3–ZrO2 composites at room and elevated temperatures by regulating interfacial reaction.
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.