Search

A concept to prepare a highly hydrophobic composite with self-healing properties has been designed and verified. The new material is based on a composite of a crystalline hydrophobic fluoro wax, synthesized from montan waxes and perfluoroethylene alcohols, combined with spherical silica nanoparticles equipped with a hydrophobic shell. Highly repellent layers were prepared using this combination of a hydrophobic crystalline wax and silica nanoparticles. The novel aspect of our concept was to prepare a ladder-like structure of the hydrophobic shell allowing the inclusion of a certain share of wax molecules. Wax molecules trapped in the hydrophobic structure during mixing are hindered from crystallizing; therefore, these molecules maintain a higher mobility compared to crystallized molecules. When a thin layer of the composite material is mechanically damaged, the mobile wax molecules can migrate and heal the defects to a certain extent. The general preparation of the composite is described and XRD analysis demonstrated that a certain share of wax molecules in the composite are hindered to crystallize. Furthermore, we show that the resulting material can recovery its repellent properties after surface damage.

The treatment of waterborne micropollutants, such as diclofenac, presents a significant challenge to wastewater treatment plants due to their incomplete removal by conventional methods. Ozonation is an effective technique for the degradation of micropollutants. However, incomplete oxidation can lead to the formation of ecotoxic by-products that require a subsequent post-treatment step. In this study, we analyze the susceptibility of micropollutant ozonation products to enzymatic digestion with laccase from Trametes versicolor to evaluate the potential of enzymatic treatment as a post-ozonation step. The omnipresent micropollutant diclofenac is used as an example, and the enzymatic degradation kinetics of all 14 detected ozonation products are analyzed by high-performance liquid chromatography coupled with high-resolution mass spectrometry (HPLC-HRMS) and tandem mass spectrometry (MS 2 ). The analysis shows that most of the ozonation products are responsive to chemo-enzymatic treatment but show considerable variation in enzymatic degradation kinetics and efficiencies. Mechanistic investigation of representative transformation products reveals that the hydroxylated aromatic nature of the ozonation products matches the substrate spectrum, facilitating their rapid recognition as substrates by laccase. However, after initiation by laccase, the subsequent chemical pathway of the enzymatically formed radicals determines the global degradability observed in the enzymatic process. Substrates capable of forming stable molecular oxidation products inhibit complete detoxification by oligomerization. This emphasizes that it is not the enzymatic uptake of the substrates but the channelling of the reaction of the substrate radicals towards the oligomerization of the substrate radicals that is the key step in the further development of an enzymatic treatment step for wastewater applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

A modular tool box for photoresponsive cholesteric liquid crystals based on hydrogen-bonded assemblies is reported. By employing 3-azopyridines as photoswitch in cholesteric liquid-crystalline thin films, a fast and reversible blue shift is observed upon irradiation, allowing tuning of the structural color over the whole visible electromagnetic spectrum. Investigations of the materials via X-ray diffraction studies indicate that the blue shift is attributed to the photoinduced destruction of smectic clusters in the cholesteric phase, resulting in a contraction of the helical structure. Unprecedently, the use of a stereolithography 3D printer (SLA) allowed direct transfer of digital information into a multicolor photonic pattern, an important step toward photonic imaging and data storage.

Thin, flat textile roofing offers negligible heat insulation. In warm areas, such roofing membranes are therefore equipped with metallized surfaces to reflect solar heat radiation, thus reducing the warming inside a textile building. Heat reflection effects achieved by metallic coatings are always accompanied by shading effects as the metals are non-transparent for visible light (VIS). Transparent conductive oxides (TCOs) are transparent for VIS and are able to reflect heat radiation in the infrared. TCOs are, e.g., widely used in the display industry. To achieve the perfect coatings needed for electronic devices, these are commonly applied using costly vacuum processes at high temperatures. Vacuum processes, on account of the high costs involved and high processing temperatures, are obstructive for an application involving textiles. Accepting that heat-reflecting textile membranes demand less perfect coatings, a wet chemical approach has been followed here when producing transparent heat-reflecting coatings. Commercially available TCOs were employed as colloidal dispersions or nanopowders to prepare sol-gel-based coating systems. Such coatings were applied to textile membranes as used for architectural textiles using simple coating techniques and at moderate curing temperatures not exceeding 130 °C. The coatings achieved about 90% transmission in the VIS spectrum and reduced near-infrared transmission (at about 2.5 µm) to nearly zero while reflecting up to 25% of that radiation. Up to 35% reflection has been realized in the far infrared, and emissivity values down to ε = 0.5777 have been measured., Competing Interests: The authors declare no conflicts of interest.

A continuous protein recovery and purification system based on the true moving bed concept is presented. A novel adsorbent material, in the form of an elastic and robust woven fabric, served as a moving belt following the general designs observed in known belt conveyors. The composite fibrous material that forms the said woven fabric showed high protein binding capacity, reaching a static binding capacity equal to 107.3 mg/g, as determined via isotherm experiments. Moreover, testing the same cation exchange fibrous material in a packed bed format resulted in excellent dynamic binding capacity values (54.5 mg/g) even when operating at high flow rates (480 cm/h). In a subsequent step, a benchtop prototype was designed, constructed, and tested. Results indicated that the moving belt system could recover a model protein (hen egg white lysozyme) with a productivity up to 0.5 mg/cm 2 /h. Likewise, a monoclonal antibody was directly recovered from unclarified CHO_K1 cell line culture with high purity, as judged by SDS-PAGE, high purification factor (5.8), and in a single step, confirming the suitability and selectivity of the purification procedure., Competing Interests: Author CZ was employed by MDX Biotechnik International GmbH. The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Guo, Kangwa, Ali, Mayer-Gall, Gutmann, Zenneck, Winter, Jungbauer and Fernandez Lahore.)

Ozonation is a powerful technique to remove micropollutants from wastewater. As chemical oxidation of wastewater comes with the formation of varying, possibly persistent and toxic by-products, post-treatment of the ozonated effluent is routinely suggested. This study explored an enzymatic treatment of ozonation products using the laccase from Trametes versicolor. A high-performance liquid chromatography coupled with high-resolution mass spectrometry (HPLC-HRMS) analysis revealed that the major by-products were effectively degraded by the enzymatic post-treatment. The enzymatic removal of the by-products reduced the ecotoxicity of the ozonation effluent, as monitored by the inhibition of Aliivibrio fischeri. The ecotoxicity was more effectively reduced by enzymatic post-oxidation at pH 7 than at the activity maximum of the laccase at pH 5. A mechanistic HPLC-HRMS and UV/Vis spectroscopic analysis revealed that acidic conditions favored rapid conversion of the phenolic by-products to dead-end products in the absence of nucleophiles. In contrast, the polymerization to harmless insoluble polymers was favored at neutral conditions. Hence, coupling ozonation with laccase-catalyzed post-oxidation at neutral conditions, which are present in wastewater effluents, is suggested as a new resource-efficient method to remove persistent micropollutants while excluding the emission of potentially harmful by-products., (© 2023. The Author(s).)

The COVID-19 pandemic has increased the usage of personal protective equipment (PPE) all round the world and, in turn, it has also increased the waste caused by disposable PPE. This has exerted a severe environmental impact, so in our work, we propose the utilization of a sustainable electrospun nanofiber based on poly lactic acid (PLA), as it is biobased and conditionally degradable. We optimized the weight percentage of the PLA-precursor solution and found that 19% PLA produces fine nanofibers with good morphology. We also introduced carbon nanodots (CNDs) in the nanofibers and evaluated their antibacterial efficiency. We used 1, 2, 3, and 4% CNDs with 19% PLA and found increased antibacterial activity with increased concentrations of CNDs. Additionally, we also applied a spunbond-nanofiber layered assembly for the medical face masks and found that with the addition of only 0.45 mg/cm 2 on the nonwoven sheet, excellent particle filtration efficiency of 96.5% and a differential pressure of 39 Pa/cm 2 were achieved, meeting the basic requirements for Type I medical face masks (ASTM-F2100).

Additives are widely used to improve the processability, toughness, and hydrolytic resistance of poly(lactic acid) (PLA)-based materials. This study compares neat PLA fibers and fibers made from PLA blends with either poly(butylene succinate) (PBS) as a plasticizer or poly(d-lactic acid) (PDLA) as a nucleating agent. The fibers have been characterized with regard to their physical and structural properties after fabrication as well as after artificial aging at elevated temperature and humidity conditions. All samples have been fabricated using industrial melt-spinning equipment, resulting in a high crystallinity of about X C = 80% and a good initial toughness. Long-term relaxation behavior has been assessed with a self-developed lifetime prediction model, which is successfully verified for semicrystalline blended fibers. Despite slight improvement of the fiber elasticity and ductility, both types of blended fibers demonstrated a reduced hydrolytic resistance. These results suggest a design strategy for neat durable PLA fibers through processing-induced high crystallinity and orientation, which provide improved hydrolytic stability while preserving tough mechanical performance.

A reusable support system for the immobilization of lipases is developed using hybrid polymer-inorganic core shell nanoparticles. The biocatalyst core consists of a silica nanoparticle. PMMA is grafted from the nanoparticle as polymer brush via ARGET ATRP (activator regenerated by electron transfer atom transfer radical polymerization), which allows defining the surface properties by chemical synthesis conditions. Lipase B from Candida antarctica is immobilized on the hybrid particles. The activity and stability of the biocatalyst are analyzed by spectroscopic activity analysis. It is shown that the hydrophobic PMMA brushes provide an activating surface for the lipase giving a higher specific activity than the enzyme in solution. Varying the surface structure from disordered to ordered polymer brushes reveals that the reusability of the biocatalyst is more effectively optimized by the surface structure than by the introduction of crosslinking with glutaraldehyde (GDA). The developed immobilization system is highly suitable for biocatalysis in non-native media which is shown by a transesterification assay in isopropyl alcohol and an esterification reaction in n-heptane., (© 2022. The Author(s).)

Megaporous adsorbents were prepared based on nonwoven polyethylene terephthalate (PET) fabrics and functionalized by covalent modification with polyvinylamine (PVAm) or monotriazinyl-β-cyclodextrin-substituted polyvinylamine (PVAm-MCT-β-CD). Mechanical properties of the resulting fabrics were maintained, as judged by tensile strength tests and scanning electron microscopy. Exceptional porosity (≥82%) and preserved hydrodynamic characteristics (Pe ≥ 63) indicated excellent structural stability when packed. The performance of the constructed adsorbents was evaluated with high molecular weight (proteins) and low molecular weight (dyes) model compounds. The static binding capacity (SBC) for bovine serum albumin (BSA) was 79.7 ± 1.3 and 92.9 ± 8.2 mg/g for PVAm-modified and PVAm-MCT-β-CD-modified fabrics, respectively. The mentioned materials also adsorbed Orange II, an acidic dye (92.4 ± 2.6 and 101.9 ± 2.6 mg/g, respectively), indicating that the hydrophobicity was a prevailing binding mechanism operating at a pH close to isoelectric point. SBC for lysozyme and toluidine blue O (TBO, a basic dye) onto PVAm-MCT-β-CD functionalized PET was 52.7 ± 5.1 and 73.3 ± 0.6 mg/g, respectively. TBOs have also shown some affinity for PVAm functionalized PET, but this was most likely to be mediated by hydrophobicity. On the other hand, operating at a superficial velocity of 90 cm/h, dynamic binding capacity for BSA was 11.4 ± 3.5 and 2.5 ± 0.6 mg/g indicating the importance of possible aggregation mechanisms during protein binding at equilibrium. Thus, PET-based adsorbents require further functional improvement for chromatography applications. However, the easy-to-construct, scalable nonwoven adsorbents deserve further attention as a potential alternative to packed-bed-chromatography adsorbents., (© 2022 The Authors. Electrophoresis published by Wiley-VCH GmbH.)

Background: Polyesters with pendant hydroxyl groups are attractive materials which offer additional functionalization points in the polymer chain. In contrast to chemical polycondensation, lipase regioselectivity enables the synthesis of these materials as certain hydroxyl groups remain unaffected during the enzymatic process., Methods and Major Results: In this study, a combination of synthesis development and reactor design was used for the enzymatic synthesis of an aliphatic-aromatic polyester with two different classes of pendant hydroxyl groups. Using 2,6-bishydroxy(methyl)-p-cresol as diol in lipase catalyzed polycondensation with adipic acid required the addition of hexane diol as third monomer for polycondensation to take place. Reaction conditions were explored in order to identify the preferred reaction conditions for the incorporation of the aromatic diol and the enhancement of the hydroxyl group density. Post-polymerization with glycerol at low temperature integrated additional aliphatic hydroxyl groups, reduced the polydispersity and increased the end group functionality., Conclusion: A new material with aromatic building blocks and boosted polymer chain reactivity was obtained, which is suggested to find application in various areas of material development from coatings to adhesives., (© 2022 The Authors. Biotechnology Journal published by Wiley-VCH GmbH.)

Dynamic covalent bonds bear great potential for the development of adaptive and self-healing materials. Herein, we introduce a versatile concept not only for the design of low-molecular-weight liquid crystals but also for their in situ postsynthetic modification by using the dynamic covalent nature of imine bonds. The methodology allows systematic investigations of structure-property relationships as well as the manipulation of the materials' behavior (liquid crystallinity) and the introduction of additional properties (here, fluorescence) by a solvent-free method. For the first time, the transamination reaction is followed by variable-temperature 19 F solid-state NMR in the mesophase, providing insights into the reaction dynamics in a liquid crystalline material. Finally, the application potential for the design of liquid crystalline materials with adaptive properties is demonstrated by a sequential combination of these reactions.

We investigate the shrinkage of a surface-grafted water-swollen hydrogel under shear flows of oils by laser scanning confocal microscopy. Interestingly, external shear flows of oil lead to linear dehydration and shrinkage of the hydrogel for all investigated flow conditions irrespective of the chemical nature of the hydrogel. The reason is that the finite solubility of water in oil removes water from the hydrogel continuously by diffusion. The flow advects the water-rich oil, as demonstrated by numerical solutions of the underlying convection-diffusion equation. In line with this hypothesis, shear does not cause gel shrinkage for water-saturated oils or non-solvents. The solubility of water in the oil will tune the dehydration dynamics.

Energy consumption by air-conditioning is expansive and leads to the emission of millions of tons of CO 2 every year. A promising approach to circumvent this problem is the reflection of solar radiation: Rooms that would not heat up by irradiation will not need to be cooled down. Especially, transparent conductive metal oxides exhibit high infrared (IR) reflectivity and are commonly applied as low-emissivity coatings (low-e coatings). Indium tin oxide (ITO) coatings are the state-of-the-art application, though indium is a rare and expensive resource. This work demonstrates that aluminum-doped zinc oxide (AZO) can be a suitable alternative to ITO for IR-reflection applications. AZO synthesized here exhibits better emissivity to be used as roofing membrane coatings for buildings in comparison to commercially available ITO coatings. AZO particles forming the reflective coating are generated via solvothermal synthesis routes and obtain high conductivity and IR reflectivity without the need of any further post-thermal treatment. Different synthesis parameters were studied, and their effects on both conductive and optical properties of the AZO nanoparticles were evaluated. To this end, a series of characterization methods, especially 27 Al-nuclear magnetic resonance spectroscopy ( 27 Al-NMR) analysis, have been conducted for a deeper insight into the particles' structure to understand the differences in conductivity and optical properties. The optimized AZO nanoparticles were coated on flexible transparent textile-based roofing membranes and tested as low-e coatings. The membranes demonstrated higher thermal reflectance compared with commercial ITO materials with an emissivity value lowered by 16%.

Dynamic tensiometry is shown to be a high-potential analytical tool in assessing physico-chemical characteristics of fragrance molecules, such as solubility limit, volatility as well as much rarely assessed interfacial activity of these amphiphilic molecules. Surface tension of aqueous solutions of selected essential oils has been measured as a function of time and fragrance concentration using maximum bubble pressure method. The effect of the temperature and saline solution on the rate of dissolution in water was assessed. Dynamic surface tension turned to be sensitive to the composition of fragrances, as demonstrated on examples of natural and synthetic mixtures. Furthermore, presented work reveals the possibility of maximum bubble pressure tensiometry method to quantify the amount of fragrance compositions in flavored salts, including the artificially aged carrier samples. Suggested here analytical approach can be used for the detection of the purity of essential oils, for the optimization of compositions and of the manufacturing processes of fragrances-containing products, as well as for the assessment of the release/evaporation of fragrances from carrier systems.

Textiles represent promising support materials for enzymes. The goal of the present work was to investigate the immobilization of commercial peroxidase on a polyester needle felt and the repeated use in the gentle degradation of norbixin in whey from dairy cheese as a practical application. High enzyme loads were obtained by a 2-step immobilization procedure. First, the number of functional groups on the textile surface was increased by a modification with amino-functional polyvinylamine. Second, the enzyme was immobilized by using 2 types of crosslinking agents. Due to the iron content of peroxidase, inductively coupled plasma-optical emission spectrometry was used for the quantitative determination of the enzyme load on the textile. The enzyme activity was evaluated using common 2,2'-azino-di-(3-ethylbenzthiazoline-6-sulfonic acid) assay for peroxidases. By the variation of enzyme input and crosslinker concentration, a maximal enzyme load of 80 mg/g of textile was achieved, and a maximum specific activity of 57 U/g of textile. For the visualization of the enzyme on the fiber surface, fluorescence microscopy as well as scanning probe microscopy were used. The immobilized peroxidase showed significant activity, even after 50 reuse cycles. In addition, the potential of the new support and enzyme combination in commercial whey bleaching was demonstrated successfully on a 10-L scale., (Copyright © 2021 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.)

NIR-sensitized cationic polymerization proceeded with good efficiency, as was demonstrated with epoxides, vinyl ether, and oxetane. A heptacyanine functioned as sensitizer while iodonium salt served as coinitiator. The anion adopts a special function in a series selected from fluorinated phosphates (a: [PF 6 ] - , b: [PF 3 (C 2 F 5 ) 3 ] - , c: [PF 3 (n-C 4 F 9 ) 3 ] - ), aluminates (d: [Al(O-t-C 4 F 9 ) 4 ] - , e: [Al(O(C 3 F 6 )CH 3 ) 4 ] - ), and methide [C(O-SO 2 CF 3 ) 3 ] - (f). Vinyl ether showed the best cationic polymerization efficiency followed by oxetanes and oxiranes. DFT calculations provided a rough pattern regarding the electrostatic potential of each anion where d showed a better reactivity than e and b. Formation of interpenetrating polymer networks (IPNs) using trimethylpropane triacrylate and epoxides proceeded in the case of NIR-sensitized polymerization where anion d served as counter ion in the initiator system. No IPN was formed by UV-LED initiation using the same monomers but thioxanthone/iodonium salt as photoinitiator. Exposure was carried out with new NIR-LED devices emitting at either 805 or 870 nm., (© 2020 The Authors. Published by Wiley-VCH GmbH.)

Singlet oxygen is a reactive oxygen species undesired in living cells but a rare and valuable reagent in chemical synthesis. We present a fluorescence spectroscopic analysis of the singlet-oxygen formation activity of commercial peroxidases and novel peroxygenases. Singlet-oxygen sensor green (SOSG) is used as fluorogenic singlet oxygen trap. Establishing a kinetic model for the reaction cascade to the fluorescent SOSG endoperoxide permits a kinetic analysis of enzymatic singlet-oxygen formation. All peroxidases and peroxygenases show singlet-oxygen formation. No singlet oxygen activity could be found for any catalase under investigation. Substrate inhibition is observed for all reactive enzymes. The commercial dye-decolorizing peroxidase industrially used for dairy bleaching shows the highest singlet-oxygen activity and the lowest inhibition. This enzyme was immobilized on a textile carrier and successfully applied for a chemical synthesis. Here, ascaridole was synthesized via enzymatically produced singlet oxygen., (© 2020 The Authors. Published by Wiley-VCH GmbH.)

Thin polymer films and coatings are used to tailor the properties of surfaces in various applications such as protection against corrosion, biochemical functionalities or electronic resistors. Polymer brushes are a certain kind of thin polymer films, where polymer chains are covalently grafted to a substrate and straighten up to form a brush structure. Here we report on differences and similarities between polymer brushes and spin-coated polymer films from polystyrene and polymethyl methacrylate with special emphasis on surface roughness and roughness correlation. The phenomenon of roughness correlation or conformality describes the replication of the roughness profile from the substrate surface to the polymer surface. It is of high interest for polymer physics of brush layers as well as applications, in which a homogeneous polymer layer thickness is required. We demonstrate that spin-coated films as well as polymer brushes show roughness correlation, but in contrast to spin-coated films, the correlation in brushes is stable to solvent vapor annealing. Roughness correlation is therefore an intrinsic property of polymer brushes.

NIR exposure at 790 nm activated photopolymerization of monomers comprising UV-absorbing moieties by using [Cu II /(TPMA)]Br 2 (TPMA=tris(2-pyridylmethyl)amine) in the ppm range and an alkyl bromide as initiator. Some of them comprised structural elements selected either from those showing proton transfer or photocycloaddition upon UV excitation. Polymers obtained comprise living end groups serving as macroinitiator for controlled synthesis of block copolymers with relatively narrow molecular weight distributions. Chromatographic results indicated formation of block copolymers produced by this synthetic approach. Free-radical polymerization of monomers pursued for comparison exhibited the expected broader dispersity of molecular weight compared to photo-ATRP. Polymerization of these monomers by UV photo-ATRP failed on the contrary to NIR photo-ATRP demonstrating the UV-filter function of the monomers. This work conclusively provides a new approach for the polymerization of monomers comprising UV-absorbing moieties through photo-ATRP in the NIR region. This occurred in a simple and efficient pathway. However, studies also showed that not all monomers chosen successfully proceeded in the NIR photo-ATRP protocol., (© 2020 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

Aramids represent a class of high-performance fibers with outstanding properties and manifold technical applications, e.g., in flame-retardant protective clothing for firefighters and soldiers. However, the dyeing of aramid fibers is accompanied by several economic and ecological disadvantages, resulting in a high consumption of water, energy and chemicals. In this study, a new and innovative dyeing procedure for m-aramid fibers using ionic liquids (ILs) is presented. The most relevant parameters of IL-dyed fibers, such as tensile strength, elongation and fastness towards washing, rubbing and light, were determined systematically. In summary, all aramid textiles dyed in ILs show similar or even better results than the conventionally dyed samples. In conclusion, we have successfully paved the way for a new, eco-friendly and more sustainable dyeing process for aramids in the near future.

Phytic acid (PA), as a natural source of phosphorus, was immobilized on cotton (CO) in a layer-by-layer (LbL) approach with polyvinylamine (PVAm) as the oppositely charged electrolyte to create a partly bio-based flame-retardant finish. PVAm was employed as a synthetic nitrogen source with the highest density of amine groups of all polymers. Vertical flame tests revealed a flame-retardant behavior with no afterflame and afterglow time for a coating of 15 bilayers (BL) containing 2% phosphorus and 1.4% nitrogen. The coating achieved a molar P:N ratio of 3:5. Microscale combustion calorimetry (MCC) analyses affirmed the flame test findings by a decrease in peak heat release rate (pkHRR) by more than 60% relative to unfinished CO. Thermogravimetric analyses (TGA) and MCC measurements exhibited a shifted CO peak to lower temperatures indicating proceeding reactions to form an isolating char on the surface. Fourier transform infrared spectroscopy (FTIR) coupled online with a TGA system, allowed the identification of a decreased amount of acrolein, methanol, carbon monoxide and formaldehyde during sample pyrolysis and a higher amount of released water. Thereby the toxicity of released volatiles was reduced. Our results prove that PA enables a different reaction by catalyzing cellulosic dehydration, which results in the formation of a protective char on the surface of the burned fabric.

A textile-based reaction system for new peroxidase reactions in non-native media was implemented. The epoxidation of cyclohexene by the commercial peroxidase MaxiBright® was realized with the textile-immobilized enzyme in an adapted liquid-liquid two-phase reactor. A commercially available polyester felt was used as low-price carrier and functionalized with polyvinyl amine. The covalent immobilization with glutardialdehyde lead to an enzyme loading of 0.10 g enzyme /g textile . The textile-based peroxidase shows a high activity retention in the presence of organic media. This catalyst is shown to enable the epoxidation of cyclohexene in various solvents as well as under neat conditions. A model reactor was produced by 3D printing which places the textile catalyst at the interphase between the liquid reaction phase and the product extracting solvent., Competing Interests: Declaration of Competing Interest There are no conflicts to declare., (Copyright © 2020 Elsevier Inc. All rights reserved.)

On the basis of the major application for block copolymers to use them as separation membranes, lithographic mask, and as templates, the preparation of highly oriented nanoporous thin films requires the selective removal of the minor phase from the pores. In the scope of this study, thin film of polystyrene- block -poly(ethylene oxide) block copolymer with a photocleavable junction groups based on ortho-nitrobenzylester (ONB) (PS- hν -PEO) was papered via the spin coating technique followed by solvent annealing to obtain highly-ordered cylindrical domains. The polymer blocks are cleaved by means of a mild UV exposure and then the pore material is washed out of the polymer film by ultra-pure water resulting in arrays of nanoporous thin films to remove one block. The removal of the PEO materials from the pores was proven using the grazing-incidence small-angle X-ray scattering (GISAXS) technique. The treatment of the polymer film during the washing process was observed in real time after two different UV exposure time (1 and 4 h) in order to draw conclusions regarding the dynamics of the removal process. In-situ X-ray reflectivity measurements provide statistically significant information about the change in the layer thickness as well as the roughness and electron density of the polymer film during pore formation. 4 H UV exposure was found to be more efficient for PEO cleavage. By in-situ SFM measurements, the structure of the ultra-thin block copolymer films was also analysed and, thus, the kinetics of the washing process was elaborated. The results from both measurements confirmed that the washing procedure induces irreversible change in morphology to the surface of the thin film.

Here, we synthesize zwitterionic polymer brushes on polyester fabrics by atom transfer radical polymerization (ATRP) after a prefunctionalization step involving an aminolysis reaction with ethylenediamine. Aminolysis is an easy method to achieve homogeneous distributions of functional groups on polyester fibers (PET) fabrics. Varying the polymerization time and the prefunctionalization conditions of the reaction, it is possible to tune the amount of water retained over the surface and study its effect on protein adhesion. This study revealed that the polymerization time plays a major role in preventing protein adhesion on the PET surface., Competing Interests: The authors declare no conflict of interest.

Understanding of nonequilibrium processes at dynamic interfaces is indispensable for advancing design and fabrication of solid-state and soft materials. The research presented here unveils specific interfacial behavior of aroma molecules and justifies their usage as multifunctional volatile surfactants. As nonconventional volatile amphiphiles, we study commercially available poorly water-soluble compounds from the classes of synthetic and essential flavor oils. Their disclosed distinctive feature is a high dynamic interfacial activity, so that they decrease the surface tension of aqueous solutions on a time scale of milliseconds. Another potentially useful property of such amphiphiles is their volatility, so that they notably evaporate from interfaces on a time scale of seconds. This behavior allows for control of wetting and spreading processes. A revealed synergetic interfacial behavior of mixtures of conventional and volatile surfactants is attributed to a decrease of the activation barrier as a result of high statistical availability of new sites at the surface upon evaporation of the volatile component. Our results offer promising advantages in manufacturing technologies which involve newly creating interfaces, such as spraying, coating technologies, ink-jet printing, microfluidics, laundry, and stabilization of emulsions in cosmetic and food industry, as well as in geosciences for controlling aerosol formation.

Nanostructured porous titania films are used in many energy-related applications. In this work, the temporal evolution of the mesoscopic deformation of mesoporous titania films synthesized via block copolymer-assisted sol-gel chemistry is investigated with in situ grazing incidence small-angle neutron scattering (GISANS) during exposure to D 2 O vapor. Two types of mesoporous titania films are compared, which have a different degree of structural stability, depending on the applied annealing temperature (400 °C vs 600 °C) in a nitrogen atmosphere. Water ingression causes a gradual structure deformation in terms of decreasing center-to-center distances and broadening of the size distribution of the titania nanostructures. Based on the evolution of the mesopore size obtained from in situ GISANS measurements, the results show that structures synthesized at lower temperature undergo a stronger deformation because of the lower elastic modulus originating from larger pores, despite having a higher degree of order.

Poly- and cyclophosphazenes are excellent flame retardants but currently, are not used as textile finishing agents because water-soluble and permanent washing systems are missing. Here, we demonstrate for the first time, the successful usage of a water-soluble cyclotriphosphazene derivative for textile finishing for cotton, different cotton/polyester, and cotton/polyamide blend fabrics. A durable finish was achieved using a photoinduced grafting reaction. The flame retardant properties of the various fabrics were improved with a higher limiting oxygen index, a reduced heat release rate, and an exhibition of intumescent. Furthermore, the finished textiles passed several standardized flammability tests., Competing Interests: The funders had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript, or in the decision to publish the results.

We address a strategy to graft hydrogels onto polyethylene terephthalate (PET) fabrics using different acrylate-based monomers. The hydrogel-modified fabrics were prepared by a two-step modification. To this end, double functional groups were firstly introduced onto the PET surface via an aminolysis reaction involving allylamine. The final grafted polymer networks were then obtained after UV-induced radical photopolymerization by varying acrylate monomer types in the presence of a cross-linker. After characterization, the resulting hydrogels showed different morphologies and abrasion resistance performances depending on their chemical nature. UV-photopolymerization is a fast and low-cost method to achieve technical fabrics with specific desired properties.

Antimicrobial finishes for textiles and other surfaces that act without the release of biocides to the environment (contact biocides) or by inhibiting microbial adhesion (antifouling action) are viewed as promising and environmentally friendly alternatives to current products. We have used polyvinylamine polymers that were functionalized with zwitterionic sulfobetaine side chains with different degrees of substitution (DS) for the finishing of poly(ethylene terephthalate) (PET) and cotton fabrics in a water-based pad-dry-cure process. After washing with different surfactants, a stable finish with total polymer add-ons of 0.2-0.5 wt% was achieved. The finished textiles efficiently inhibited the adhesion of proteins and bacteria to the surface even with a small DS as low as 20%. Textiles finished with polymers with a low DS also showed significant antibacterial activity, most notably against Staphylococcus aureus . Accordingly, textile finishes with either pure antiadhesive (DS > 50%) or combined antiadhesive and antibacterial properties (DS = 20-50%) are accessible using this approach., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

A comprehensive study combining detailed computational analyses with temperature-variable FT-IR experiments was performed in order to elucidate the structure of the hydrogen-bonded liquid crystals based on phloroglucinol and azopyridine in their mesophase. Conformational analysis revealed three relevant conformers: star, λ- and E-shape. The results demonstrate an entropy-driven unfolding mechanism of the assembly. The stability of the conformers is given by intermolecular π-π and dispersion interactions of the azopyridine side chains. Correlating the calculated vibrational frequency with experimental FT-IR spectra suggests a λ-folded conformation of the assemblies as the predominant species in the mesophase., Competing Interests: The authors declare no conflict of interest., (This journal is © The Royal Society of Chemistry.)

In this work, a pioneering study on the electrical properties of composite carbon nanofibres (CNFs) using current-sensitive atomic force microscopy (CS-AFM) has been demonstrated. CNFs are highly interesting materials which are usable in a wide array of applications e.g. electrode materials for biosensors, lithium ion batteries, fuel cells and supercapacitors. CNFs offer a high specific surface area and thus have a high contact area for charge transfer. CNFs can be produced using spinnable polyacrylonitrile (PAN) as a precursor for carbonisation. For the purpose of developing efficient CNFs with high conductivity and power density, silver nanoparticle (AgNPs)-containing PAN solutions were electrospun to form composite nanofibres which was followed by heat treatment. The applied voltage of the spinning setup and the content of both PAN and the silver nanoparticles in the spinning solution were varied in order to study their influence on the morphology and the electrical properties of the nanofibres. The resultant morphologies and fibre diameters were determined by scanning electron microscopy (SEM). The formation of silver nanoparticles was characterised in solution by UV-visible absorption spectroscopy and dynamic light scattering (DLS), while energy-dispersive X-ray spectroscopy (EDX) and transmission electron microscopy (TEM) were carried out to investigate the presence as well as the average diameter of the AgNPs. The electrical properties of the CNFs were investigated using CS-AFM. This technique gives us the possibility to explore the electrical properties of single fibers and hence derive relationships between the structural features and the electrical properties. Our results show that the composite CNFs have a higher electrical conductivity than the neat CNFs and both the average diameter of the fibers and the electrical conductivity increase with an increasing AgNP content., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The carbodiimide-mediated amine coupling of protein ligands to sensor chips coated with anionic polycarboxylate hydrogels, such as carboxymethyl dextran, is the predominant covalent immobilization procedure utilized in optical biosensors, namely surface plasmon resonance (SPR) biosensors. Usually, electrostatic interactions at a slightly acidic pH and low ionic strength are employed to efficiently accumulate neutral and basic ligands on the chip surface, which are then covalently coupled by surface-bound active N-hydroxysuccinimide (NHS) esters. Unfortunately, this approach is not suitable for acidic proteins or other ligands with low isoelectric points (IEPs), such as nucleic acids, because the charge density of the polycarboxylates is greatly reduced at acidic pH or because electrostatic attraction cannot be achieved. To overcome these drawbacks, we have established a charge-reversal approach that allows the preconcentration of acidic proteins above their IEPs. A precisely controlled amount of tertiary amines is applied to reverse the previous anionic surface charge while maintaining carbodiimide compatibility with future protein immobilization. The mechanism of this reversed-charge immobilization approach was demonstrated employing protein A as a model protein and using attenuated total reflectance Fourier transform infrared spectroscopy, dynamic contact angle measurements, colorimetric quantification, and SPR analysis to characterize surface derivatization. Furthermore, even though it had previously proven impossible to preconcentrate DNA electrostatically and to covalently couple it to polyanionic chip surfaces, we demonstrated that our approach allowed DNA to be preconcentrated and immobilized in good yields. Graphical abstract Principle of the covalent immobilization of acidic ligands on reversed-charge zwitterionic sensor chip surfaces.

For many applications, mesoporous titania nanostructures are exposed to water or need to be backfilled via infiltration with an aqueous solution, which can cause deformations of the nanostructure by capillary forces. In this work, the degree of deformation caused by water infiltration in two types of mesoporous, nanostructured titania films exposed to water vapor is compared. The different types of nanostructured titania films are prepared via a polymer template assisted sol-gel synthesis in conjunction with a polymer-template removal at high-temperatures under ambient conditions versus nitrogen atmosphere. Information about surface and inner morphology is extracted by scanning electron microscopy and grazing incidence small-angle neutron scattering (GISANS) measurements, respectively. Furthermore, complementary information on thin film composition and porosity are probed via X-ray reflectivity. The backfilling induced deformation of near surface structures and structures inside the mesoporous titania films is determined by GISANS before and after D 2 O infiltration. The respective atmosphere used for template removal influences the details of the titania nanostructure and strongly impacts the degree of water induced deformation. Drying of the films shows reversibility of the deformation., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Total internal reflection fluorescence correlation spectroscopy (TIR-FCS) is applied to study the self-diffusion of poly(ethylene glycol) solutions in the presence of weakly attractive interfaces. Glass coverslips modified with aminopropyl- and propyl-terminated silanes are used to study the influence of solid surfaces on polymer diffusion. A model of three phases of polymer diffusion allows to describe the experimental fluorescence autocorrelation functions. Besides the two-dimensional diffusion of adsorbed polymer on the substrate and three-dimensional free diffusion in bulk solution, a third diffusion time scale is observed with intermediate diffusion times. This retarded three-dimensional diffusion in the solution is assigned to the long-range effects of solid surfaces on diffusional dynamics of polymers. The respective diffusion constants show Rouse scaling ( D ∼ N -1 ), indicating a screening of hydrodynamic interactions by the presence of the surface. Hence, the presented TIR-FCS method proves to be a valuable tool to investigate the effect of surfaces on polymer diffusion beyond the first adsorbed polymer layer on the 100 nm length scale.

Although current desalination technologies are mature enough and advanced, the shortage of freshwater is still considered as one of the most pressing global issues. Therefore, there is a strong incentive to explore and investigate new potential methods with low energy consumption. We have previously reported that reversible thermally induced sorption/desorption process using polymeric hydrogels hold promise for water desalination with further development. In order to develop a more effective hydrogels architecture, polyelectrolyte moieties were introduced in this work as pendent chains and a thermally responsive polymer as network backbone using reversible addition-fragmentation chain transfer (RAFT) polymerisation. The ability of the comb-type polymeric hydrogels to desalinate water was evaluated. These hydrogels were proved to absorb water with low salinity from brine solution of 2 g L - 1 NaCl and release the absorbed water at relatively low temperature conditions of 50 ∘ C. The fraction of the grafted polyacrylic acid and the comb-chain length were varied to understand their influence on the swelling/deswelling behaviour for these hydrogels. The ionic fraction in the hydrogels and the resulting hydrophilic/hydrophobic balance are crucial for the proposed desalination process. In contrast, the comb-chain length impacted the swelling behaviour of hydrogels but showed relatively little influence on the dewatering process.

Indium tin oxide (ITO) particle coatings are known for high transparency in the visible, good conductive properties and near-infrared absorption. These properties depend on ITO particle's stoichiometric composition, defects and size. Here we present a method to gradually change ITO particle's optical properties by a simple and controlled laser irradiation process. The defined irradiation process and controlled energy dose input allows one to engineer the absorption and transmission of coatings made from these particles. We investigate the role of the surrounding solvent, influence of laser fluence and the specific energy dose targeting modification of the ITO particle's morphology and chemistry by stepwise laser irradiation in a free liquid jet. TEM, SEM, EDX, XPS, XRD and Raman are used to elucidate the structural, morphological and chemical changes of the laser-induced ITO particles. On the basis of these results the observed modification of the optical properties is tentatively attributed to chemical changes, e.g. laser-induced defects or partial reduction.

A major challenge in corneal tissue engineering and lamellar corneal transplantation is to develop synthetic scaffolds able to simulate the optical and mechanical properties of the native cornea. As a carrier, the graft scaffolds should provide the basis for anchorage, repair and regeneration. Although quite a number of scaffolds have been engineered to date, they have not been able to simultaneously recapitulate chemical, mechanical, and structural properties of the corneal extracellular matrix (ECM). Here, we examined different compositions of elastomeric biodegradable poly (glycerol sebacate) (PGS)-poly (ε-caprolactone) (PCL) nanofibrous scaffolds with respect to their cyto- and immunocompatibility. These scaffolds were semi-transparent with well-defined mechanical properties and direct positive effects on viability of human corneal endothelial cells (HCEC) and human conjunctival epithelial cells (HCjEC). Moreover, within 3days HCEC established monolayers with the hexagonal morphology typical for this cell type. All PGS-PCL mixtures analyzed did not trigger effects in granulocytes, naïve and activated peripheral blood mononuclear cells (PBMCs). However, scaffolds with a higher content of PGS-PCL ratio showed the best cell organization, cyto- and immunocompatibility. Subsequently, this PGS-PCL composition could be used for further development of clinical constructs to support corneal tissue repair., Statement of Significance: In corneal tissue engineering a major challenge is the development of synthetic scaffolds with similar properties to native cornea. In our recent works, we introduced the biodegradable, polymeric nanofibrous scaffolds with similar optical and mechanical properties for corneal regeneration and here we examined the cyto- and immunocompatibility of biodegradable nanofibrous scaffolds in contact to white blood cells. Directing the alignment of human corneal cells by nanofibrous scaffolds and high viability of cells was detected by forming of endothelium monolayer with hexagonal morphology on the nanofibrous scaffold. In addition, our results for the first time show that these nanofibrous scaffolds did not trigger effects in white blood cells. These results highlight the considerable translational potential of the nanofibrous scaffolds to clinical applications., (Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Biocatalytic transformations that employ immobilized enzymes become increasingly important for industrial applications. Synthetic or natural textile fiber materials such as polyester, polyamide or viscose are support materials that are comparatively inexpensive. Contrary to traditional support materials, their flexibility enables their use in reactors of any geometry and a fast and residue-free removal from batch reactors. In this study a permanently immobilized peroxidase (Baylase®) has been investigated on polyester felt as a solid support as a new heterogeneous catalyst system. The polyester felt was functionalized by coating with polyvinylamine and subsequent activation with glutaraldehyde as a crosslinking agent. The enzyme load on the textile surface, the activity of the immobilized protein after repeated use as well as the storage stability was evaluated. Scanning electron micrographs and UV Vis spectroscopy made it possible to verify the enzyme immobilization on the textile surface. Furthermore, the load of immobilized peroxidase was determined by ICP OE spectrometry to be 9-12 mg per gram of textile. The activity of immobilized Baylase® remained high over 35 reaction cycles and a storage period of 8 weeks., (© 2017 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim.)

Several ionic liquids are excellent solvents for cellulose. Starting from that finishing of PET fabrics with cellulose dissolved in ionic liquids like 1-ethyl-3-methyl imidazolium acetate, diethylphosphate and chloride, or the chloride of butyl-methyl imidazolium has been investigated. Finishing has been carried out from solutions of different concentrations, using microcrystalline cellulose or cotton and by employing different cross-linkers. Viscosity of solutions has been investigated for different ionic liquids, concentrations, cellulose sources, linkers and temperatures. Since ionic liquids exhibit no vapor pressure, simple pad-dry-cure processes are excluded. Before drying the ionic liquid has to be removed by a rinsing step. Accordingly rinsing with fresh ionic liquid followed by water or the direct rinsing with water have been tested. The amount of cellulose deposited has been investigated by gravimetry, zinc chloride iodine test as well as reactive dyeing. Results concerning wettability, water up-take, surface resistance, wear-resistance or washing stability are presented., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Herein we report an efficient modular approach to supramolecular functional materials. Hierarchical self-assembly of azopyridine derivatives and hydrogen-bond donors yielded discotic assemblies. Subtle differences in the core units introduced mesomorphic behaviour and fast photo-response of the liquid crystals based on phloroglucinol. The presented results prove the benefits of a modular methodology towards highly responsive materials with tailor-made properties.

A hybrid blocking layer consisting of a conducting TiO2 network embedded in a ceramic matrix is implemented in a solid-state dye-sensitized solar cell. This novel type of blocking layer is thinner than the classical blocking layer films as shown with SEM and XRR measurements, and thereby the conductivity of the hybrid film is increased by 110%. A percolating TiO2 network, proven by TEM/ESI and GISAXS measurements, allows for the charge transport. Although being thinner, the hybrid film completely separates the rough electrode material from the hole-transport medium in solar cells to avoid the recombination of charge carriers at this interface. In total, the power conversion efficiency of solar cells is improved: the application in photovoltaics shows that the efficiency of devices with the hybrid blocking layer is increased by 6% compared to identical solar cells employing the conventional blocking layer.

Highly ordered block copolymer thin films have been studied extensively during the last years because they afford versatile self-assembled morphologies via a bottom-up approach. They promise to be used in applications such as polymeric membranes or templates for nanostructured materials. Among the block copolymer structures, perpendicular cylinders have received strong attention due to their ability to fabricate highly ordered nanopores and nanowires. Nanopores can be created from a thin block copolymer film upon the removal of one block by selective etching or by dissolution of one polymer block. Here we demonstrate the utilization of polystyrene-block-poly(ethylene oxide) diblock copolymer (PS-hν-PEO) with an ortho-nitrobenzyl ester (ONB) as the photocleavable block-linker to create highly ordered thin films. Removal of the PEO block by choosing an appropriate solvent upon photocleavage is expected to yield arrays of nanopores decorated with functional groups, thus lending itself to adsorption or filtration uses. While the feasibility of this approach has been demonstrated, it is crucial to understand the influence of removal conditions (i.e., efficiency of photocleavage as well as best washing solvent) and to evaluate changes in the surface topology and inner structure upon photocleavage. To this end, the time dependence evolution of the surface morphology of block copolymer thin films was studied using grazing-incidence small-angle X-ray scattering (GISAXS) technique in combination with scanning probe microscopy.

In this work, we explore the ability of utilizing hydrogels synthesized from a temperature-sensitive polymer and a polyelectrolyte to desalinate salt water by means of reversible thermally induced absorption and desorption. Thus, the influence of the macromolecular architecture on the swelling/deswelling behavior for such hydrogels was investigated by tailor-made network structures. To this end, a series of chemically cross-linked polymeric hydrogels were synthesized via free radical-initiated copolymerization of sodium acrylate (SA) with the thermoresponsive comonomer N-isopropylacrylamide (NIPAAm) by realizing different structural types. In particular, two different polyNIPAAm macromonomers, either with one acrylate function at the chain end or with additional acrylate functions as side groups were synthesized by controlled polymerization and subsequent polymer-analogous reaction and then used as building blocks. The rheological behaviors of hydrogels and their estimated mesh sizes are discussed. The performance of the hydrogels in terms of swelling and deswelling in both deionized water (DI) and brackish water (2 g/L NaCl) was measured as a function of cross-linking degree and particle size. The salt content could be reduced by 23% in one cycle by using the best performing material.

Forensic genetic analysis of items possibly handled by a suspect or a victim is frequently inquired by the law enforcement authorities, since DNA left on touched objects can often be linked to an individual. Due to technical improvement, even poor traces, which seemed to be unsuitable for DNA analysis a few years ago, may be amplified successfully today. Yet, DNA can be transferred to a crime scene artificially or unintentionally without any primary contact between the individual and the object found at the crime scene, the so-called secondary transfer or indirect transfer in general. In this study, "secondary transfer" scenarios with cells and DNA of different origins under wet conditions were investigated. Transfer was simulated as either "washing by hand" in a washtub or as "machine laundry" in a washing machine. As expected, major differences were seen between blood stains and epithelial abrasions. DNA from blood donors could be detected clearly both on the donor and on the acceptor textile, regardless of washing method. Regarding epithelial abrasions, simulating worn clothes, after washing by hand, only little residual DNA was found, and partial profiles were displayed on the donor textile, while transfer to the acceptor textile occurred even less and not in noteworthy amount and quality. Single alleles could be found both on donor textiles and acceptor textiles after simulated machine wash, but no reliable DNA profile could be verified after laundry in machine. Therefore, a DNA transfer from one worn cloth (without blood stains) to another textile in the washing machine seems to be extremely unlikely.

We report measurements of structure, mechanical properties, glass transition temperature, and contact angle of a novel nanocomposite material consisting of swellable silsesquioxane nanoparticles with grafted poly(ethyl methacrylate) (PEMA) brushes and PEMA matrices with varying molecular weight. We measured the interparticle distance at the surface of the composites using scanning probe microscopy (SPM) and in the bulk of ∼0.5 μm thick films by grazing incidence small angle X-ray scattering (GISAXS). For a given molecular weight of the brush unstable dispersions at high molecular weight of the matrix indicate an intrinsic incompatibility between polymer-grafted-nanoparticles and homopolymer matrices. This incompatibility is affirmed by a high contact angle between the polymer-grafted-nanoparticles and the high molecular weight matrix as measured by SPM. For unstable dispersions, we measured a decreased glass transition temperature along with a decreased plateau modulus by dynamic mechanical thermal analysis (DMTA) which indicates the formation of a liquid-like layer at the brush-matrix interface. This proves the ability to decouple the structural and mechanical properties from the potential to be swollen with small molecules. It opens a new area of use of these soft nanocomposites as slow release materials with tailored mechanical properties.

Despite their excellent flame retardant properties, polyphosphazenes are currently not used as flame retardant agents for textile finishing, because a permanent fixation on the substrate surface has failed so far. Here, we present the successful synthesis and characterization of a noncombustible and foam-forming polyphosphazene derivative, that can be immobilized durably on cotton and different cotton/polyester blended fabrics using photoinduced grafting reactions. The flame retardant properties are improved, a higher limiting oxygen index is found, and the modified textiles pass several standardized flammability tests. As flame retardant mechanism a synergistic effect between the immobilized polyphosphazene and the textile substrate was observed. The polyphosphazene finishing induces an earlier decomposition of the material with a reduced mass loss in thermogravimetric analysis. The decomposition of cotton and polyester leads to the formation of phosphorus oxynitride, which forms a protecting barrier layer on the fiber surface. In addition, the permanence of the flame retardant finishing was proven by laundry and abrasion tests.

To analyze the photothermal ablation of polymers, we designed a temperature measurement setup based on spectral pyrometry. The setup allows to acquire 2D temperature distributions with 1 μm size and 1 μs time resolution and therefore the determination of the center temperature of a laser heating process. Finite element simulations were used to verify and understand the heat conversion and heat flow in the process. With this setup, the photothermal ablation of polystyrene, poly(α-methylstyrene), a polyimide and a triazene polymer was investigated. The thermal stability, the glass transition temperature Tg and the viscosity above Tg were governing the ablation process. Thermal decomposition for the applied laser pulse of about 10 μs started at temperatures similar to the start of decomposition in thermogravimetry. Furthermore, for polystyrene and poly(α-methylstyrene), both with a Tg in the range between room and decomposition temperature, ablation already occurred at temperatures well below the decomposition temperature, only at 30-40 K above Tg. The mechanism was photomechanical, i.e. a stress due to the thermal expansion of the polymer was responsible for ablation. Low molecular weight polymers showed differences in photomechanical ablation, corresponding to their lower Tg and lower viscosity above the glass transition. However, the difference in ablated volume was only significant at higher temperatures in the temperature regime for thermal decomposition at quasi-equilibrium time scales.

Background: An estimated 10 million people suffer worldwide from vision loss caused by corneal damage. For the worst cases, the only available treatment is transplantation with human donor corneal tissue. However, in numerous countries there is a considerable shortage of corneal tissue of good quality, leading to various efforts to develop tissue substitutes. The present study aims to introduce a nanofibrous scaffold of poly(glycerol sebacate) PGS as a biodegradable implant, for the corneal tissue engineering., Materials and Methods: Nanofibrous scaffolds were produced from PGS and poly(ε-caprolactone) (PCL) by a modified electro-spinning process. The biocompatibility of the material was tested in vitro by colorimetric MTT assay on days 3, 5, and 7 to test the cell viability of human corneal endothelium cells (HCEC). To examine a potential immunological reaction of the scaffolds, samples were exposed to mononuclear cells derived from peripheral blood (PBMCs). After an incubation period of 3 days, supernatants were assayed for apoptotic assessment and immunogenic potentials by annexin V FITC//propidium iodide and flow-cytometric analysis., Results: We could successfully demonstrate that cultivation of HCECs on PGS/PCL scaffolds was possible. Compared to day 3, cell density determined by microplate absorbance was significantly higher after 7 days of cultivation (p < 0.0001). According to the MTT data, none of the samples showed toxicity. Apoptotic assessments by FACS analysis showed that no composition stimulated apoptosis or activated PBMCs occurred. All the compositions were inert for native as well as activated T/B/NK cells and monocytes. It can be concluded that leukocytes and their activity was not affected by the scaffolds., Conclusion: A tissue-like scaffold mimicking the human stroma could be developed. The results indicate that PGS/PCL scaffolds could be considered as ideal candidates for corneal tissue engineering as they are biocompatible in contact to corneal endothelial cells and blood cells., (Georg Thieme Verlag KG Stuttgart · New York.)

The wetting dynamic on microrough and perfectly wetting (superhydrophilic) acrylates was studied. These surfaces were achieved by coating polymer films made of poly(ethyleneterephthalate) (PET) with a hydrophilic acrylate based on hydroxypropylacrylate and polyethyleneglycolmonoacrylate, which was then cured and microroughened by photonic microfolding. The high transparency of the thin acrylate layers and polymer films allowed us to record the spreading of an applied water droplet through the film samples. Subsequently, the dynamic radius of the spreading pattern rc(t) was determined from the video recording. Various models for the wetting dynamics of superhydrophilic surfaces, namely, Tanner's law and a roughness-modified derivation published by McHale et al. in 2009, were then compared to the experimental results. Basically, the development of rc(t) in time was found to be in good agreement with McHale's model. Data analysis showed, however, that the initial phase of the spreading, that is, for t < 1 s, was not predicted well. This differing behavior relates well to a theory published by Cazabat and Cohen Stuart, who proposed that, on rough surfaces, spreading follows a power law in three time regimes. In this model, the (very) initial spreading is expected to be similar to the spreading on a smooth surface.