Search

Many patients cannot tolerate low-dose weekly methotrexate (MTX) therapy for inflammatory arthritis treatment due to life-threatening toxicity. Although biologics offer a target-specific therapy, it raises the risk of serious infections and even cancer due to immune system suppression. We introduce an anti-inflammatory arthritis MTX ester prodrug using a long-circulating biocompatible polymeric macromolecule: folic acid (FA) functionalized hyperbranched polyglycerol (HPG). In vitro the drug MTX is incrementally released through pH and enzymatic degradation over 2 weeks. The role of matrix metalloproteinases (MMPs) in site-specific prodrug activation was verified using synovial fluid (SF) of 26 rheumatology patients and 4 healthy controls. Elevated levels of specific MMPs-markers of joint inflammation-positively correlated with enhanced prodrug release explained by acid-catalyzed hydrolysis of esters by proteases. Intravenously administered 111 In-radiolabeled prodrug confirmed by SPECT/CT imaging that it accumulated preferentially in inflamed joints while reducing off-target side-effects in a mouse model of rheumatoid arthritis (RA). Added FA as a targeting vector prolonged prodrug action; prodrug with 4x less MTX applied every 2 weeks was as effective as weekly MTX therapy. The preclinical results suggest a prodrug-based strategy for the treatment of inflammatory joint diseases, with potential for other chronic inflammatory diseases and cancer., (© 2024 The Author(s). Advanced Healthcare Materials published by Wiley‐VCH GmbH.)

Human cathelicidin LL-37, a cationic host defense peptide (CHDP), has several important physiological roles, including antimicrobial activity, immune modulation, and wound healing, and is a being investigated as a therapeutic candidate for several indications. While the effects of endogenously produced LL-37 are well studied, the biodistribution of exogenously administered LL-37 are less known. Here we assess the biodistribution of a gallium-67 labeled variant of LL-37 using nuclear imaging techniques over a 48 h period in healthy mice. When administered as an intravenous bolus just over 20 µg, the LL-37-based radiotracer was rapidly cleared from the blood, largely by the liver, while an appreciable fraction of the dose temporarily distributed to the lungs. When administered subcutaneously at the same dose level, the radiotracer was absorbed systemically following a two-phase kinetic model and was predominately cleared renally. Uptake into sites rich in immune cells, such as the lymph nodes and the spleen, was observed for both routes of administration. Scans of free gallium-67 were also performed as controls. Important preclinical insights into the biodistribution of exogenously administered LL-37 were gained from this study, which can aid in the understanding of this and related cationic host-defense peptides., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Frequent injections of anti-CD124 monoclonal antibody (αCD124) over long periods of time are used to treat chronic rhinosinusitis with nasal polyps (CRSwNP). Needle-free, intranasal administration (i.n.) of αCD124 is expected to provide advantages of localized delivery, improved efficacy, and enhanced medication adherence. However, delivery barriers such as the mucus and epithelium in the nasal tissue impede penetration of αCD124. Herein, two novel protamine nanoconstructs: allyl glycidyl ether conjugated protamine (Nano-P) and polyamidoamine-linked protamine (Dendri-P) were synthesized and showed enhanced αCD124 penetration through multiple epithelial layers compared to protamine in mice. αCD124 was mixed with Nano-P or Dendri-P and then intranasally delivered for the treatment of severe CRSwNP in mice. Micro-CT and pathological changes in nasal turbinates showed that these two nano-formulations achieved ∼50 % and ∼40 % reductions in nasal polypoid lesions and eosinophil count, respectively. Both nano-formulations provided enhanced efficacy in suppressing nasal and systemic Immunoglobulin E (IgE) and nasal type 2 inflammatory biomarkers, such as interleukin 13 (IL-13) and IL-25. These effects were superior to those in the protamine formulation group and subcutaneous (s.c.) αCD124 given at a 12.5-fold higher dose. Intranasal delivery of protamine, Nano-P, or Dendri-P did not induce any measurable toxicities in mice., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Innate defense regulator-1002 (IDR-1002) is a synthetic peptide with promising immunomodulatory and antibiofilm properties. An appreciable body of work exists around its mechanism of action at the cellular and molecular level, along with its efficacy across several infection and inflammation models. However, little is known about its absorption, distribution, and excretion in live organisms. Here, we performed a comprehensive biodistribution assessment with a gallium-67 radiolabeled derivative of IDR-1002 using nuclear tracing techniques. Various dose levels of the radiotracer (2-40 mg/kg) were administered into the blood, peritoneal cavity, and subcutaneous tissue, or instilled into the lungs. The peptide was well tolerated at all subcutaneous and intraperitoneal doses, although higher levels were associated with delayed absorption kinetics and precipitation of the peptide within the tissues. Low intratracheal doses were rapidly absorbed systemically, and small increases in the dose level were lethal. Intravenous doses were rapidly cleared from the blood at lower levels, and upon escalation, were toxic with a high proportion of the dose accumulating within the lung tissue. To improve biocompatibility and prolong its circulation within the blood, IDR-1002 was further formulated onto high molecular weight hyperbranched polyglycerol (HPG) polymers. Constructs prepared at 5:1 and 10:1 peptide-to-polymer ratios were colloidally stable, maintained the biological profile of the peptide payload and helped reduce red blood cell lysis. The 5:1 construct circulated well in the blood, but higher peptide loading was associated with rapid clearance by the reticuloendothelial system. Many peptides face pharmacokinetic and biocompatibility challenges, but formulations such as those with HPG have the potential to overcome these limitations.

Pretargeting, which is the separation of target accumulation and the administration of a secondary imaging agent into two sequential steps, offers the potential to improve image contrast and reduce radiation burden for nuclear imaging. In recent years, the tetrazine ligation has emerged as a promising approach to facilitate covalent pretargeted imaging due to its unprecedented kinetics and bioorthogonality. Pretargeted bone imaging with TCO-modified alendronic acid (Aln-TCO) is an attractive model that allows the evaluation of tetrazines in healthy animals without the need for complex disease models or targeting regimens. Recent structure-activity relationship studies of tetrazines evaluated important parameters for the design of potent tetrazine-radiotracers for pretargeted imaging. However, limited information is available for 99mTc-labeled tetrazines. In this study, four tetrazines intended for labeling with fac-[99mTc(OH2)3 (CO)3]+ were synthesized and evaluated using an Aln-TCO mouse model. 3,6-bis(2-pyridyl)-1,2,4,5-Tz without additional linker showed higher pretargeted bone uptake and less background activity compared to the same scaffold with a PEG8 linker or 3-phenyl-1,2,4,5-Tz-based compounds. Additionally, improved bone/blood ratios were observed in pretargeted animals compared to animals receiving directly labeled Aln-TCO. The results of this study implicate 3,6-bis(2-pyridyl)-1,2,4,5-Tz as a promising scaffold for potential 99mTc-labeled tetrazines., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Bohrmann et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Hepatocellular carcinoma (HCC) is widely known to be chemo-resistant and presents with significant liver disease resulting in low tolerability to systemic chemotherapy. As a counter measure, more targeted therapies such as trans-arterial chemoembolization (TACE) and trans-arterial radioembolization (TARE) have been developed. To further optimize these therapies, animal models are critical in elucidating the molecular events in disease progression and test new treatment options. The present study focuses on the development of a hepatoma bearing rat model. N1S1 rat hepatoma cells were transfected by a lentiviral method and injected into the liver of Sprague Dawley (SD) and Rowett Nude (RNU) rats. Longitudinal tumor growth was observed by bioluminescence imaging (BLI) and liver/tumor histology. In both models, tumors were visible within 4 days post cell inoculation. Tumor take rates were 52 % and 73 % for male and female SD rats, respectively, and 100 % for male RNU rats. By day 12 and 15 post inoculation, we recorded complete tumor regression in male and female SD rats. Liver histology showed advanced fibrosis in the tumor regressed SD rats, whilst RNU rats exhibited the characteristic sheet pattern of Novikoff tumor with mild liver fibrosis. Increased CD3 and TUNEL staining observed in SD rat livers may be key factors for tumor regression. Our data reveal that the immunocompetent SD rats are not recommended as a model for therapeutic investigations. The immunosuppressed RNU rats, however, are characterized by consistent and reliable tumor growth and thus a desirable model for future therapeutic investigations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Using external actuation sources to navigate untethered drug-eluting microrobots in the bloodstream offers great promise in improving the selectivity of drug delivery, especially in oncology, but the current field forces are difficult to maintain with enough strength inside the human body (>70-centimeter-diameter range) to achieve this operation. Here, we present an algorithm to predict the optimal patient position with respect to gravity during endovascular microrobot navigation. Magnetic resonance navigation, using magnetic field gradients in clinical magnetic resonance imaging (MRI), is combined with the algorithm to improve the targeting efficiency of magnetic microrobots (MMRs). Using a dedicated microparticle injector, a high-precision MRI-compatible balloon inflation system, and a clinical MRI, MMRs were successfully steered into targeted lobes via the hepatic arteries of living pigs. The distribution ratio of the microrobots (roughly 2000 MMRs per pig) in the right liver lobe increased from 47.7 to 86.4% and increased in the left lobe from 52.2 to 84.1%. After passing through multiple vascular bifurcations, the number of MMRs reaching four different target liver lobes had a 1.7- to 2.6-fold increase in the navigation groups compared with the control group. Performing simulations on 19 patients with hepatocellular carcinoma (HCC) demonstrated that the proposed technique can meet the need for hepatic embolization in patients with HCC. Our technology offers selectable direction for actuator-based navigation of microrobots at the human scale.

Persistent pain is a significant healthcare problem with limited treatment options. The high incidence of comorbid chronic pain and depression significantly reduces life quality and complicates the treatment of both conditions. Antidepressants are less effective for pain and depression than for depression alone and they induce severe side effects. Opioids are highly efficacious analgesics, but rapid development of tolerance, dependence, and debilitating side effects limit their efficacy and safe use. Leucine-enkephalin (Leu-ENK), the endogenous delta opioid receptor agonist, controls pain and mood and produces potent analgesia with reduced adverse effects compared to conventional opioids. High proteolytic instability, however, makes Leu-ENK ineffective after systemic administration and limits its clinical usefulness. KK-103, a Leu-ENK prodrug, was developed to overcome these limitations of Leu-ENK via markedly increased plasma stability in mice. We showed rapid and substantially increased systemic adsorption and blood plasma exposure of KK-103 compared to Leu-ENK. We also observed brain uptake of radiolabeled KK-103 after systemic administration, indicating a central effect of KK-103. We then established KK-103's prolonged antinociceptive efficacy in the ramped hot plate and formalin test. In both models, KK-103 produced a comparable dose to the maximum antinociceptive-effect relationship. The pain-alleviating effect of KK-103 primarily resulted from activating the delta opioid receptor after the likely conversion of KK-103 to Leu-ENK in vivo. Finally, KK-103 produced an antidepressant-like activity comparable to the antidepressant desipramine, but with minimal gastrointestinal inhibition and no incidence of sedation.

Purpose: There is a significant need for a widely available, translatable, sensitive and non-invasive imaging biomarker for tumor hypoxia in radiation oncology. Treatment-induced changes in tumor tissue oxygenation can alter the sensitivity of cancer tissues to radiation, but the relative difficulty in monitoring the tumor microenvironment results in scarce clinical and research data. Oxygen-Enhanced MRI (OE-MRI) uses inhaled oxygen as a contrast agent to measure tissue oxygenation. Here we investigate the utility of dOE-MRI, a previously validated imaging approach employing a cycling gas challenge and independent component analysis (ICA), to detect VEGF-ablation treatment-induced changes in tumor oxygenation that result in radiosensitization., Methods: Murine squamous cell carcinoma (SCCVII) tumor-bearing mice were treated with 5 mg/kg anti-VEGF murine antibody B20 (B20-4.1.1, Genentech) 2-7 days prior to radiation treatment, tissue collection or MR imaging using a 7 T scanner. dOE-MRI scans were acquired for a total of three repeated cycles of air (2 min) and 100% oxygen (2 min) with responding voxels indicating tissue oxygenation. DCE-MRI scans were acquired using a high molecular weight (MW) contrast agent (Gd-DOTA based hyperbranched polygylcerol; HPG-GdF, 500 kDa) to obtain fractional plasma volume (fPV) and apparent permeability-surface area product (aPS) parameters derived from the MR concentration-time curves. Changes to the tumor microenvironment were evaluated histologically, with cryosections stained and imaged for hypoxia, DNA damage, vasculature and perfusion. Radiosensitizing effects of B20-mediated increases in oxygenation were evaluated by clonogenic survival assays and by staining for DNA damage marker γH2AX., Results: Tumors from mice treated with B20 exhibit changes to their vasculature that are consistent with a vascular normalization response, and result in a temporary period of reduced hypoxia. DCE-MRI using injectable contrast agent HPG-GDF measured decreased vessel permeability in treated tumors, while dOE-MRI using inhaled oxygen as a contrast agent showed greater tissue oxygenation. These treatment-induced changes to the tumor microenvironment result in significantly increased radiation sensitivity, illustrating the utility of dOE-MRI as a non-invasive biomarker of treatment response and tumor sensitivity during cancer interventions., Conclusions: VEGF-ablation therapy-mediated changes to tumor vascular function measurable using DCE-MRI techniques may be monitored using the less invasive approach of dOE-MRI, an effective biomarker of tissue oxygenation that can monitor treatment response and predict radiation sensitivity., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Aptamers are promising targeting agents for imaging and therapy of numerous diseases, including cancer. However, a significant shortcoming of aptamers is their poor stability and fast excretion, limiting their application in vivo. Common strategies to overcome these challenges is to chemically modify aptamers in order to increase their stability and/or to apply formulation technologies such as conjugating them to polymers or nanocarriers in order to increase their circulation half-life. This is expected to result in improved cellular uptake or retention to passively targeted nanomedicines. Herein, we report a modular conjugation strategy based on click chemistry between functionalized tetrazines and trans -cyclooctene (TCO), for the modification of high molecular weight hyperbranched polyglycerol (HPG) with sgc8 aptamer, fluorescent dyes, and 111 In. Our data indicate strong affinity of sgc8 against a range of solid tumor-derived cell lines that have previously not been tested with this aptamer. Nevertheless, nonspecific uptake of scrambled ssDNA-functionalized HPG in cells highlights inherent challenges of aptamer-targeted probes that remain to be solved for clinical translation. We validate HPG-sgc8 as a nontoxic nanoprobe with high affinity against MDA-MB-468 breast and A431 lung cancer cells and show significantly increased plasma stability compared to free sgc8. In vivo quantitative SPECT/CT imaging indicates EPR-mediated tumor uptake of HPG-sgc8 and nontargeted or scrambled ssDNA-conjugated HPG but no statistically significant difference between these formulations in terms of total tumor uptake or retention. Our study emphasizes the need for stringent controls and quantification in the evaluation of aptamer-targeted probes. For this purpose, our versatile synthesis strategy provides a simple approach for the design and evaluation of long-circulating aptamer-conjugated nanoformulations., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Cardiac blood pool imaging is currently performed almost exclusively with 99m Tc-based compounds and SPECT/CT imaging. Using a generator-based PET radioisotope has a few advantages, including not needing nuclear reactors to produce it, obtaining better resolution in humans, and potentially reducing the radiation dose to the patient. When the shortlived radioisotope 68 Ga is used, it can be applied repeatedly on the same day-for example, for the detection of bleeding. Our objective was to prepare and evaluate a long-circulating polymer functionalized with gallium for its biodistribution, toxicity, and dosimetric properties. A 500 kDa hyperbranched polyglycerol was conjugated to the chelator NOTA and radiolabeled rapidly at room temperature with 68 Ga. It was then injected intravenously into a rat, and gated imaging allowed us to easily observe wall motion and cardiac contractility, confirming the suitability of this radiopharmaceutical for cardiac blood pool imaging. Internal radiation dose calculations showed that the radiation doses that patients would receive from the PET agent would be 2.5× lower than those from the 99m Tc agent. A complete 14-day toxicology study in rats concluded that there were no gross pathology findings, changes in body or organ weights, or histopathological events. This radioactive-metal-functionalized polymer might be a suitable non-toxic agent to advance for clinical application.

Peptides are small biomolecules known to stimulate or inhibit important functions in the human body. The clinical use of peptides by oral delivery, however, is very limited due to their sensitive structure and physiological barriers present in the gastrointestinal tract. These barriers can be overcome with chemical and mechanical approaches protease inhibitors, permeation enhancers, and polymeric encapsulation. Studying the success of these approaches pre-clinically with imaging techniques such as fluorescence imaging (IVIS) and optical microscopy is difficult due to the lack of in-depth penetration. In comparison, nuclear imaging provides a better platform to observe the gastrointestinal transit and quantitative distribution of radiolabeled peptides. This review provides a brief background on the oral delivery of peptides and states examples from the literature on how nuclear imaging can help to observe and analyze the gastrointestinal transit of oral peptides. The review connects the fields of peptide delivery and nuclear medicine in an interdisciplinary way to potentially overcome the challenges faced during the study of oral peptide formulations.

Innate defense regulators (IDRs) are synthetic host-defense peptides (HDPs) with broad-spectrum anti-infective properties, including immunomodulatory, anti-biofilm and direct antimicrobial activities. A lack of pharmacokinetic data about these peptides hinders their development and makes it challenging to fully understand how they work in vivo since their mechanism of action is dependent on tissue concentrations of the peptide. Here, we set out to define in detail the pharmacokinetics of a well-characterized IDR molecule, IDR-1018. To make the peptide traceable, it was radiolabeled with the long-lived gamma-emitting isotope gallium-67. After a series of bench-top characterizations, the radiotracer was administered to healthy mice intravenously (IV) or subcutaneously (SQ) at various dose levels (2.5-13 mg/kg). Nuclear imaging and ex-vivo biodistributions were used to quantify organ and tissue uptake of the radiotracer over time. When administered as an IV bolus, the distribution profile of the radiotracer changed as the dose was escalated. At 2.5 mg/kg, the peptide was well-tolerated, poorly circulated in the blood and was cleared predominantly by the reticuloendothelial system. Higher doses (7 and 13 mg/kg) as an IV bolus were almost immediately lethal due to respiratory arrest; significant lung uptake of the radiotracer was observed from nuclear scans of these animals, and histological examination found extensive damage to the pulmonary vasculature and alveoli. When administered SQ at a dose of 3 mg/kg, radiolabeled IDR-1018 was rapidly absorbed from the site of injection and predominately cleared renally. Apart from the SQ injection site, no other tissue had a concentration above the minimum inhibitory concentration that would enable this peptide to exert direct antimicrobial effects against most pathogenic bacteria. Tissue concentrations were sufficient, however, to disrupt microbial biofilms and alter the host immune response. Overall, this study demonstrated that the administration of synthetic IDR peptide in vivo is best suited to local administration which avoids some of the issues associated with peptide toxicity that are observed when administered systemically by IV injection, an issue that will have to be addressed through formulation., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: EFH and REWH have invented and filed for patent protection on IDR-1018 and related peptide sequences. This patent has been assigned to their employer, the University of British Columbia, and has been licensed to ABT Innovations Inc., in which both have an ownership position. ABT Innovations Inc. is a subsidiary of ASEP Medical Holdings Inc. EFH is employed by ASEP and receives salary while REWH holds an executive position and is on the Board of ASEP. TVFE, CB, DP, CRR, KS and UOH report no conflicts of interest., (Copyright © 2022 Elsevier B.V. All rights reserved.)

With the growing interest in developing silver-based antimicrobials, there is a need to better understand the behavior of silver within biological systems. To address this, we showed that single-photon emission computed tomography (SPECT) is a suitable method to noninvasively image 111 Ag-labeled compounds in mice. Formed by neutron irradiation of palladium foil, 111 Ag can be rapidly isolated with a high degree of purity and stably incorporated into antimicrobial silver nanoparticles. The imaging showed that nanoparticles are retained in the lungs for up to 48 h following intratracheal instillation, with limited uptake into the systemic circulation or organs of the reticuloendothelial system. Furthermore, in a mouse model of pulmonary Pseudomonas aeruginosa infection, the nanoparticles reduced the bacterial burden by 11.6-fold without inducing the production of pro-inflammatory mediators. Overall, SPECT imaging with 111 Ag is a useful tool for noninvasively visualizing the biodistribution of silver-containing compounds in rodents. This knowledge of how silver nanoparticles distribute in vivo can be used to predict their therapeutic efficacy.

Aptamers are single stranded oligonucleotides that fold into three dimensional structures and are able to recognize a variety of molecular targets. Due to the similarity to antibodies with regards to specificity and affinity and their chemical versatility, aptamers are increasingly used to create targeted probes for in vivo molecular imaging and therapy. Hence, aptamer-based probes have been utilized in practically all major imaging modalities such as nuclear imaging, magnetic resonance imaging, x-ray computed tomography, echography and fluorescence imaging, as well as newer modalities such as surface enhanced Raman spectroscopy. Aside from targeting, aptamers have been used for the creation of sensors that allow the localized detection of cellular markers such as ATP in vivo . This review focuses on in vivo studies of aptamer-based probes for imaging and theranostics since the comprehensive overview by Bouvier-Müller and Ducongé in 2018., Competing Interests: Competing Interests: The authors have declared that no competing interest exists., (© The author(s).)

Human insulin (HI) has fascinating metal-facilitated self-assembly properties that are essential for its biological function. HI has a natural Zn 2+ binding site and we have previously shown that covalently attached abiotic ligands (e.g., bipyridine, terpyridine) can lead to the formation of nanosized oligomeric structures through the coordination of metal ions. Here we studied the hypothesis that metal ions can be used to directly control the pharmacokinetics of insulin after covalent attachment of an abiotic ligand that binds metal ions. We evaluated the pharmacokinetics (PK) and biodistribution of HI self-assemblies directed by metal ion coordination (i.e., Fe 2+ /Zn 2+ , Eu 3+ /Zn 2+ , Fe 2+ /Co 3+ ) using preclinical SPECT/CT imaging and ex vivo gamma counting. HI was site-specifically modified with terpyridine (Tpy) at the Phe B1 or Lys B29 position to create conjugates that bind either Fe 2+ or Eu 3+ , while its natural binding site (His B10 ) preferentially coordinates with either Zn 2+ or Co 3+ . HI was also functionalized with trans-cyclooctene (TCO) opposite to Tpy at Phe B1 or Lys B29 , respectively, to allow for tetrazine-TCO coupling via a tetrazine-modified DTPA followed by 111 In-radiolabeling for SPECT/CT imaging. When the 111 In-B29Tpy-HI conjugate was coordinated with Fe 2+ /Zn 2+ , its retention at the injection site 6 h after injection was ~8-fold higher than the control without the metal ions, while its kidney accumulation was lower. 111 In-B1Tpy-HI showed comparable retention at the injection site 6 h after injection and slightly increased retention at 24 h. However, higher kidney accumulation and residence time of degraded 111 In-B1Tpy-HI was observed compared to that of 111 In-B29Tpy-HI. Quantitative PK analysis based on SPECT/CT images confirmed slower distribution from the injection site of the HI-metal ion assemblies compared to control HI conjugates. Our results show that the Tpy-binding site (i.e., Phe B1 or Lys B29 ) on HI and its coordination with the added metal ions (i.e., Fe 2+ /Zn 2+ or Fe 2+ /Co 3+ ) directed the distribution half-life of HI significantly. This clearly indicates that the PK of insulin can be controlled by complexation with different metal ions., (Copyright © 2022. Published by Elsevier B.V.)

Introduction: Magnetic resonance navigation (MRN) uses MRI gradients to steer magnetic drug-eluting beads (MDEBs) across vascular bifurcations. We aim to experimentally verify our theoretical forces balance model (gravitational, thrust, friction, buoyant and gradient steering forces) to improve the MRN targeted success rate., Method: A single-bifurcation phantom (3 mm inner diameter) made of poly-vinyl alcohol was connected to a cardiac pump at 0.8 mL/s, 60 beats/minutes with a glycerol solution to reproduce the viscosity of blood. MDEB aggregates (25 ± 6 particles, 200 [Formula: see text]) were released into the main branch through a 5F catheter. The phantom was tilted horizontally from - 10° to +25° to evaluate the MRN performance., Results: The gravitational force was equivalent to 71.85 mT/m in a 3T MRI. The gradient duration and amplitude had a power relationship (amplitude=78.717 [Formula: see text]). It was possible, in 15° elevated vascular branches, to steer 87% of injected aggregates if two MRI gradients are simultaneously activated ([Formula: see text] = +26.5 mT/m, [Formula: see text]= +18 mT/m for 57% duty cycle), the flow velocity was minimized to 8 cm/s and a residual pulsatile flow to minimize the force of friction., Conclusion: Our experimental model can determine the maximum elevation angle MRN can perform in a single-bifurcation phantom simulating in vivo conditions., (© 2021. Biomedical Engineering Society.)

Purpose: The majority of X-ray contrast agents (XCA) are made with iodine, but iodine-based XCA (I-XCA) exhibit low contrast in high kVp X-rays due to iodine's low atomic number ( Z  = 53) and K-edge (33.1 keV). While rhenium is a transition metal with a high atomic number ( Z  = 75) and K-edge (71.7 keV), the utilization of rhenium-based XCA (Re-XCA) in X-ray imaging techniques has not been studied in depth. Our study had two objectives: (1) to compare both the image quality and the absorbed dose of I- and Re-XCA and (2) to prepare and image a rhenium-doped scaffold. Procedures . I- and Re-XCA were prepared and imaged from 50 to 120 kVp by Micro-computed tomography ( µ CT) and digital radiography and from 120 to 220 kVp by planar X-ray imaging. The scans were repeated using 0.1 to 1.6 mm thick copper filters to harden the X-ray beam. A rhenium-doped scaffold was prepared via electrospinning, used to coat catheters, and imaged at 90 kVp by µ CT., Results: I-XCA have a greater contrast-to-noise ratio (CNR) at 50 and 80 kVp, but Re-XCA have a greater CNR at >120 kVp. The difference in CNR is increased as the thickness of the copper filters is increased. For instance, the percent CNR improvement of rhenium over iodine is 14.2% with a 0.6 mm thick copper filter, but it is 59.1% with a 1.6 mm thick copper filter, as shown at 120 kVp by µ CT. Upon coating them with a rhenium-doped scaffold, the catheters became radiopaque., Conclusions: Using Monte Carlo simulations, we showed that it is possible to reduce the absorbed dose of high kVp X-rays while allowing the acquisition of high-quality images. Furthermore, radiopaque catheters have the potential of enhancing the contrast during catheterizations and helping physicians to place catheters inside patients more rapidly and precisely., Competing Interests: The authors declare that they have no conflicts of interest., (Copyright © 2021 José Carlos De La Vega et al.)

Radiolabeling of a drug with radioactive iodine is a good method to determine its pharmacokinetics and biodistribution in vivo that only minimally alters its physicochemical properties. With dual labeling, using the two radioactive iodine isotopes 123 I and 125 I, two different drugs can be evaluated at the same time, or one can follow both a drug and its drug delivery system using a single photon emission computed tomography (SPECT) imager. One difficulty is that the two radioisotopes have overlapping gamma spectra. Our aim was therefore to develop a technique that overcomes this problem and allows for quantitative analysis of the two radioisotopes present at varied isotope ratios. For this purpose, we developed a simple method that included scatter and attenuation corrections and fully compensated for 123 I/ 125 I crosstalk, and then tested it in phantom measurements. The method was applied to the study of an orally administered lipid formulation for the delivery of fenofibrate in rats. To directly compare a traditional study, where fenofibrate was determined in plasma samples to SPECT imaging with 123 I-labeled fenofibrate and 125 I-labeled triolein over 24 h, the drug concentrations were converted to standardized uptake values (SUVs), an unusual unit for pharmaceutical scientists, but the standard unit for radiologists. A generally good agreement between the traditional and the radioactive imaging method was found in the pharmacokinetics and biodistribution results. Small differences are discussed in detail. Overall, SPECT imaging is an excellent method to pilot a new formulation with just a few animals, replaces blood sampling, and can very quickly highlight potential administration problems, the excretion pathways and the kinetics. Furthermore, dual labeling with the two radioisotopes 123 I and 125 I clearly shows if a drug and its drug delivery system stay together when traveling through the body, if slow drug release takes place, and where degradation/excretion of the components occurs., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Albumin is widely used in pharmaceutical applications to alter the pharmacokinetic profile, improve efficacy, or decrease the toxicity of active compounds. Various drug delivery systems using albumin have been reported, including microparticles. Macroaggregated albumin (MAA) is one of the more common forms of albumin microparticles, which is predominately used for lung perfusion imaging when labeled with radionuclide technetium-99m ( 99m Tc). These microparticles are formed by heat-denaturing albumin in a bulk solution, making it very challenging to control the size and dispersity of the preparations (coefficient of variation, CV, ∼50%). In this work, we developed an integrated microfluidics platform to create more tunable and precise MAA particles, the so-called microfluidic-MAA (M2A2). The microfluidic chips, prepared using off-stoichiometry thiol-ene chemistry, consist of a flow-focusing region followed by an extended and water-heated curing channel (85 °C). M2A2 particles with diameters between 70 and 300 μm with CVs between 10 and 20% were reliably prepared by adjusting the flow rates of the dispersed and continuous phases. To demonstrate the pharmaceutical utility of M2A2, particles were labeled with indium-111 ( 111 In) and their distribution was assessed in healthy mice using nuclear imaging. 111 In-M2A2 behaved similarly to 99m Tc-MAA, with lung uptake predominately observed early on followed by clearance over time by the reticuloendothelial and renal systems. Our microfluidic chip represents an elegant and controllable method to prepare albumin microparticles for biomedical applications.

The emergence of bacteria resistant to antibiotics and the resulting infections are increasingly becoming a public health issue. Multidrug-resistant (MDR) bacteria are responsible for infections leading to increased morbidity and mortality in hospitals, prolonged time of hospitalization, and additional burden to financial costs. Therefore, there is an urgent need for novel antibacterial agents that will both treat MDR infections and outsmart the bacterial evolutionary mechanisms, preventing further resistance development. In this study, a green synthesis employing nontoxic lignin as both reducing and capping agents was adopted to formulate stable and biocompatible silver-lignin nanoparticles (NPs) exhibiting antibacterial activity. The resulting silver-lignin NPs were approximately 20 nm in diameter and did not agglomerate after one year of storage at 4 °C. They were able to inhibit the growth of a panel of MDR clinical isolates, including Staphylococcus aureus , Staphylococcus epidermidis , Pseudomonas aeruginosa , Klebsiella pneumoniae , and Acinetobacter baumannii , at concentrations that did not affect the viability of a monocyte-derived THP-1 human cell line. Furthermore, the exposure of silver-lignin NPs to the THP-1 cells led to a significant increase in the secretion of the anti-inflammatory cytokine IL-10, demonstrating the potential of these particles to act as an antimicrobial and anti-inflammatory agent simultaneously. P. aeruginosa genes linked with efflux, heavy metal resistance, capsular biosynthesis, and quorum sensing were investigated for changes in gene expression upon sublethal exposure to the silver-lignin NPs. Genes encoding for membrane proteins with an efflux function were upregulated. However, all other genes were membrane proteins that did not efflux metals and were downregulated.

The validation of metal-phenolic nanoparticles (MPNs) in preclinical imaging studies represents a growing field of interest due to their versatility in forming predesigned structures with unique properties. Before MPNs can be used in medicine, their pharmacokinetics must be optimized so that accumulation in nontargeted organs is prevented and toxicity is minimized. Here, we report the fabrication of MPNs made of a coordination polymer core that combines In(III), Cu(II), and a mixture of the imidazole 1,4-bis(imidazole-1-ylmethyl)-benzene and the catechol 3,4-dihydroxycinnamic acid ligands. Furthermore, a phenolic-based coating was used as an anchoring platform to attach poly(ethylene glycol) (PEG). The resulting MPNs, with effective hydrodynamic diameters of around 120 nm, could be further derivatized with surface-embedded molecules, such as folic acid, to facilitate in vivo targeting and multifunctionality. The prepared MPNs were evaluated for in vitro plasma stability, cytotoxicity, and cell internalization and found to be biocompatible under physiological conditions. First, biomedical evaluations were then performed by intrinsically incorporating trace amounts of the radioactive metals 111 In or 64 Cu during the MPN synthesis directly into their polymeric matrix. The resulting particles, which had identical physicochemical properties to their nonradioactive counterparts, were used to perform in vivo single-photon emission computed tomography (SPECT) and positron emission tomography (PET) in tumor-bearing mice. The ability to incorporate multiple metals and radiometals into MPNs illustrates the diverse range of functional nanoparticles that can be prepared with this approach and broadens the scope of these nanoconstructs as multimodal preclinical imaging agents.

Due to the increasing inability of antibiotics to treat multidrug-resistant (MDR) bacteria, metal and metal oxide nanoparticles have been gaining interest as antimicrobial agents. Among those, silver nanoparticles have been used extensively as broad-spectrum antimicrobial agents. Here, we describe a newly-developed, 10-min (120 °C at 5 bar pressure) microwave-assisted synthesis of silver nanoparticles made from the wood biopolymer lignin as a reducing and capping agent. The resulting lignin-capped silver nanoparticles (AgLNPs) had an average particle diameter of 13.4 ± 2.8 nm. Antimicrobial susceptibility assays against a variety of MDR clinical Gram-positive and Gram-negative pathogens revealed a minimal inhibitory concentration (MIC) of AgLNPs ≤5 µg/mL. AgLNPs (10 µg/mL) showed ≤20% cytotoxicity towards monocytic THP-1 cells and were well tolerated when administered subcutaneously in mice at high concentrations (5 mg at a concentration of 100 mg/mL) with no obvious toxicity. AgLNPs showed efficacy in an in vivo infection (abscess) mouse model against MDR Pseudomonas aeruginosa LESB58 and methicillin-resistant Staphylococcus aureus USA300. A significant decrease in abscess sizes was observed for both strains as well as a reduction in bacterial loads of P. aeruginosa after three days. This demonstrates that microwave-assisted synthesis provides an optimized strategy for the production of AgLNPs while maintaining antimicrobial activity in vitro and in vivo., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Pulmonary delivery of small interfering RNA (siRNA)-based drugs is promising in treating severe lung disorders characterized by the upregulated expression of disease-causing genes. Previous studies have shown that the sustained siRNA release in vitro can be achieved from polymeric matrix nanoparticles based on poly(lactide- co -glycolide) (PLGA) loaded with lipoplexes (LPXs) composed of cationic lipid and anionic siRNA (lipid-polymer hybrid nanoparticles, LPNs). Yet, the in vivo efficacy, potential for prolonging the pharmacological effect, disposition, and safety of LPNs after pulmonary administration have not been investigated. In this study, siRNA against enhanced green fluorescent protein (EGFP-siRNA) was either assembled with 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) to form LPX or co-entrapped with DOTAP in PLGA nanoparticles to form LPNs. The disposition and clearance of LPXs and LPNs in mouse lungs were studied after intratracheal administration by using single-photon emission computed tomography/computed tomography (SPECT/CT) and gamma counting. Fluorescence spectroscopy, Western blot, and confocal laser scanning microscopy were used to evaluate the silencing of the EGFP expression mediated by the LPXs and LPNs after intratracheal administration to transgenic mice expressing the EGFP gene. The in vivo biocompatibility of LPXs and LPNs was investigated by measuring the cytokine level, total cell counts in bronchoalveolar lavage fluid, and observing the lung tissue histology section. The results showed that the silencing of the EGFP expression mediated by LPNs after pulmonary administration was both prolonged and enhanced as compared to LPXs. This may be attributed to the sustained release characteristics of PLGA, and the prolonged retention in the lung tissue of the colloidally more stable LPNs in comparison to LPXs, as indicated by SPECT/CT. The presence of PLGA effectively alleviated the acute inflammatory effect of cationic lipids to the lungs. This study suggests that PLGA-based LPNs may present an effective formulation strategy to mediate sustained gene silencing effects in the lung via pulmonary administration.

The controlled self-assembly of peptide- and protein-based pharmaceuticals is of central importance for their mode of action and tuning of their properties. Peptide YY 3-36 (PYY 3-36 ) is a 36-residue peptide hormone that reduces food intake when peripherally administered. Herein, we describe the synthesis of a PYY 3-36 analogue functionalized with a metal-ion-binding 2,2'-bipyridine ligand that enables self-assembly through metal complexation. Upon addition of Cu II , the bipyridine-modified PYY 3-36 peptide binds stoichiometric quantities of metal ions in solution and contributes to the organization of higher-order assemblies. In this study, we aimed to explore the size effect of the self-assembly in vivo by using non-invasive quantitative single-photon emission computed tomography/computed tomography (SPECT/CT) imaging. For this purpose, bipyridine-modified PYY 3-36 was radiolabeled with a chelator holding 111 In III , followed by the addition of Cu II to the bipyridine ligand. SPECT/CT imaging and biodistribution studies showed fast renal clearance and accumulation in the kidney cortex. The radiolabeled bipyridyl-PYY 3-36 conjugates with and without Cu II presented a slightly slower excretion 1 h post injection compared to the unmodified-PYY 3-36 , thus demonstrating that higher self-assemblies of the peptide might have an effect on the pharmacokinetics., (© 2020 Wiley-VCH GmbH.)

Background: The discovery and development of new medicines requires high-throughput screening of possible therapeutics in a specific model of the disease. Infrared thermal imaging (IRT) is a modern assessment method with extensive clinical and preclinical applications. Employing IRT in longitudinal preclinical setting to monitor arthritis onset, disease activity and therapeutic efficacies requires a standardized framework to provide reproducible quantitative data as a precondition for clinical studies., Methods: Here, we established the accuracy and reliability of an inexpensive smartphone connected infrared (IR) camera against known temperature objects as well as certified blackbody calibration equipment. An easy to use protocol incorporating contactless image acquisition and computer-assisted data analysis was developed to detect disease-related temperature changes in a collagen-induced arthritis (CIA) mouse model and validated by comparison with two conventional methods, clinical arthritis scoring and paw thickness measurement. We implemented IRT to demonstrate the beneficial therapeutic effect of nanoparticle drug delivery versus free methotrexate (MTX) in vivo., Results: The calibrations revealed high accuracy and reliability of the IR camera for detecting temperature changes in the rheumatoid arthritis animal model. Significant positive correlation was found between temperature changes and paw thickness measurements as the disease progressed. IRT was found to be superior over the conventional techniques specially at early arthritis onset, when it is difficult to observe subclinical signs and measure structural changes., Conclusion: IRT proved to be a valid and unbiased method to detect temperature changes and quantify the degree of inflammation in a rapid and reproducible manner in longitudinal preclinical drug efficacy studies.

Pulmonary formulations have been attracting much attention because of their direct effects on respiratory diseases, but also their non-invasive administration for the treatment of systemic diseases. When developing such formulations, they are typically first investigated in mice. As there are various pulmonary administration methods, the researcher has to decide on the best quantitative method for their preclinical investigations among candidate methods, both for total delivery and distribution within the lung lobes. In this study, we investigated the deposition and distribution of siRNA loaded PLGA nanoparticles (NPs) in the different lung lobes via three widely used pulmonary administration methods: intratracheal instillation, intratracheal spraying and intranasal instillation. The NPs were radiolabeled with 111 In, administered and a single photon emission computed tomography (SPECT/CT) whole body scan performed. Quantitative image volume of interest (VOI) analysis of all inhalation related organs was performed, plus sub-organ examinations using dissection and gamma counting. Intratracheal instillation and intratracheal spraying deposited >95% and >85% of radiolabeled NPs in the lung, respectively. However, the lung lobe distribution of the NPs was inhomogeneous. Intranasal instillation deposited only ~28% of the dose in the lungs, with even larger inhomogeneity and individual variation between animals. Furthermore, there was a high deposition of the NPs in the stomach. Intratracheal instillation and intratracheal spraying deposit a large number of NPs in the lungs, and are thus useful to test therapeutic effects in preclinical animal studies. However, the inhomogeneous distribution of formulation between lung lobes needs to be considered in the experimental design. Intranasal instillation should not be used as a means of pulmonary administration., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Local as well as systemic therapy is often used to treat bacterial lung infections. Delivery of antibiotics to the vascular side of infected lung tissue using lung-targeting microspheres (MS) is a good alternative to conventional administration routes, allowing for localized high levels of antibiotics. This delivery route can also complement inhaled antibiotic therapy, especially in the case of compromised lung function. We prepared and characterized monodisperse poly(lactic- co -glycolic acid) (PLGA) MS loaded with levofloxacin using a flow-focusing glass microfluidic chip. In vitro characterization showed that the encapsulated LVX displayed a biphasic controlled release during 5 days and preserved its antibacterial activity. The MS degradation was investigated in vitro by cross-sectioning the MS using a focused ion beam scanning electron microscope and in vivo by histological examination of lung tissue from mice intravenously administered with the MS. The MS showed changes in the surface morphology and internal matrix, whereas the degradation in vivo was 3 times faster than that in vitro . No effect on the viability of endothelial and lung epithelial cells or hemolytic activity was observed. To evaluate the pharmacokinetics and biodistribution of the MS, complete quantitative imaging of the 111 indium-labeled PLGA MS was performed in vivo with single-photon emission computed tomography imaging over 10 days. The PLGA MS distributed homogeneously in the lung capillaries. Overall, intravenous administration of 12 μm PLGA MS is suitable for passive lung targeting and pulmonary therapy.

A rigid chiral acyclic chelator H 2 CHX hox was synthesized and evaluated for Ga 3+ -based radiopharmaceutical applications; it was compared to the previously reported hexadentate H 2 hox to determine the effect of a backbone reinforced from adding a chiral 1S,2S-trans-cyclohexane on metal complex stability, kinetic inertness, and in vivo pharmacokinetics. NMR spectroscopy and theoretical calculation revealed that [Ga( CHX hox)] + showed a very similar coordination geometry to that of [Ga(hox)] + , and only one isomer in solution was observed by NMR spectroscopy. Solution studies showed that the modification results in a significant improvement in the exceptionally high thermodynamic stability of [Ga(hox)] + with a 1.56 log unit increase in stability constant (log K ML = 35.91(1)). More importantly, H 2 CHX hox showed very fast Ga 3+ complexation at physiological pH 7.4, and acid-assisted Ga 3+ complex dissociation kinetic studies (pH 1) in comparison with H 2 hox revealed a 50-fold increase of the dissociation half-life time from 73 min to 58 h. Fluorescence microscopy imaging study confirmed its cellular uptake and accumulation in endoplasmic reticulum and mitochondria. MTT studies indicated a quite low cytotoxicity of [Ga( CHX hox)] + over a large concentration range. Dynamic PET imaging studies showed no accumulation in muscle, lungs, bone, and brain, suggesting no release of free Ga 3+ ions. [ 68 Ga][Ga( CHX hox)] + is cleared from the mouse via hepatobiliary and renal pathways. Compared to [ 68 Ga][Ga(hox)] + , the increased lipophilicity of [ 68 Ga][Ga( CHX hox)] + enhanced heart and liver uptake and decreased kidney clearance. [ 67 Ga][Ga( CHX hox)] + SPECT/CT imaging and biodistribution study revealed good clearance from liver to gallbladder after 90 min and finally into feces after 5 h. No decomposition or transchelation was observed over the 5 h study. These results confirmed H 2 CHX hox to be an obvious improvement over H 2 hox and an excellent candidate in this new "ox" family for the development of radiopharmaceutical compounds.

While there is a steady growth in the number of microfluidics applications, the search for an optimal material that delivers the diverse characteristics needed for the numerous tasks is still nowhere close to being settled. Often overlooked and still underrepresented, the thiol-ene family of polymer materials has an enormous potential for applications in organs-on-a-chip, droplet productions, microanalytics, and point of care testing. In this review, the main characteristics of the thiol-ene materials are given, and advantages and drawbacks with respect to their potential in microfluidic chip fabrication are critically assessed. Select applications, which exploit the versatility of the thiol-ene polymers, are presented and discussed. It is concluded that, in particular, the rapid prototyping possibility combined with the material's resulting mechanical strength, solvent resistance, and biocompatibility, as well as the inherently easy surface functionalization, are strong factors to make thiol-ene polymers strong contenders for promising future materials for many biological, clinical, and technical lab-on-a-chip applications.

Using lipid-based drug delivery systems (LbDDS) is an efficient strategy to enhance the low oral bioavailability of poorly water-soluble drugs. Here the oral absorption of fenofibrate (FF) from LbDDS in rats was investigated in pharmacokinetic, in vitro lipolysis, and SPECT/CT in vivo imaging studies. The investigated formulations were soybean oil solution (SBO), a mixture of soybean oil and monoacyl phosphatidylcholine (MAPC) (SBO-MAPC), self-nanoemulsifying drug delivery systems with and without MAPC (SNEDDS-MAPC and SNEDDS, respectively), and an aqueous suspension (SUSP) as a reference. Oral bioavailability of the LbDDS ranged from 27 to 35%. A two-step in vitro lipolysis model simulating rat gastro-intestinal digestion provided in vitro FF solubilisation data to understand oral absorption. During the in vitro lipolysis, most FF was undissolved for SUSP and distributed into the poorly dispersed oil phase for SBO. For the SNEDDS without MAPC, practically all FF solubilised into the aqueous phase during the dispersion and digestion. Adding MAPC to SBO enhanced the dispersion of the oil phase into the digestion media while adding MAPC to SNEDDS resulted in a distribution of 29% of FF into the oil phase at the beginning of in vitro lipolysis. FF distribution into both oil and aqueous phases explained the higher and prolonged oral absorption of LbDDS containing MAPC. To elucidate the relatively low bioavailability of all formulations, FF and triolein were labeled with 123 I and 125 I, respectively, to study the biodistribution of drug and lipid excipients in a dual isotope SPECT/CT in vivo imaging study. The concentration of radiolabeled drug as a function of time in the heart correlated to the plasma curves. A significant amount of radiolabeled drug and lipids (i.e., 28-59% and 24-60% of radiolabeled drug and lipids, respectively) was observed in the stomach at 24 h post administration, which can be linked to the low bioavailability of the formulations. The current study for the first time combined in vitro lipolysis and dual isotope in vivo imaging to find the root cause of different fenofibrate absorption profiles from LbDDS and an aqueous suspension., (Copyright © 2019 Elsevier B.V. All rights reserved.)

A method was developed and validated to determine the intradermal (ID) fluid delivery potential of several ID devices, including hollow microneedles. The novel method used water soluble technetium-99 m pertechnetate ( 99m TcO 4 - ) diluted in normal saline to measure the volume of fluid delivered to and remaining in the skin. The fluid that back-flowed to the skin surface and the fluid left on the device surface were also quantified, thus capturing all fluid volumes deposited during intradermal injections. The technique described in this manuscript was used to assess the injection performance of conventional hypodermic needles and hollow microneedles ex vivo using porcine skin and in vivo with a rat model. Since only a small fraction, 1.1%, of the water-soluble tracer remained bound to the skin when applied topically, the technique can be used to differentiate between injected fluid and backflow. Counting of gamma radiation from 99m TcO 4 - provided sub-nanoliter resolution for volume measurements, making the proposed method powerful, sensitive, and suitable for the assessments of ID injection devices, particularly for vaccine delivery., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

This work combines a particle injection system with our proposed magnetic resonance navigation (MRN) sequence with the intention of validating MRN in a two-bifurcation phantom for endovascular treatment of hepatocellular carcinoma (HCC). A theoretical physical model used to calculate the most appropriate size of the magnetic drug-eluting bead (MDEB, 200 μm) aggregates was proposed. The aggregates were injected into the phantom by a dedicated particle injector while a trigger signal was automatically sent to the MRI to start MRN which consists of interleaved tracking and steering sequences. When the main branch of the phantom was parallel to B 0 , the aggregate distribution ratio in the (left-left, left-right, right-left and right-right divisions was obtained with results of 8, 68, 24 and 0% respectively at baseline (no MRN) and increased to 84%, 100, 84 and 92% (p < 0.001, p = 0.004, p < 0.001, p < 0.001) after implementing our MRN protocol. When the main branch was perpendicular to B 0 , the right-left branch, having the smallest baseline distribution rate of 0%, reached 80% (p < 0.001) after applying MRN. Moreover, the success rate of MRN was always more than 92% at the 1st bifurcation in the experiments above.

Zirconium-89 ( 89 Zr) is a suitable radionuclide for positron-emission tomography (PET) of long-circulating targeting vectors such as monoclonal antibodies (mAbs). Due to stability concerns for the most widely used 89 Zr-chelating agent desferrioxamine B (DFO) in preclinical studies, alternative 89 Zr-chelators are currently being developed. We recently reported on the first tetrakis(3-hydroxy-4-pyridinone) (3,4-HOPO) ligand THPN, which was identified as a promising 89 Zr-chelator. In this study, we aimed to further explore this octadentate chelate in vitro and in vivo. The [Zr IV (THPN)] thermodynamic stability was quantified in solution titration studies, which revealed one of the highest formation constants reported for a zirconium chelate (log β ML 50.3(1), pM = 42.8). Solution stabilities with iron(III) were also exceptionally high and can compete with some of the strongest Fe III -chelates. A first bifunctional derivative of the octadentate ligand, p -SCN-Bn-THPN, was then produced in a multistep synthesis. To assess and compare the long-term 89 Zr complex stability, bifunctional THPN, as well as the literature chelators p -SCN-Phe-DFO and p -SCN-Phe-DFO*, were conjugated to the high-molecular weight (800 kDa) polymeric carrier hyperbranched polyglycerol (HPG). The functionalized HPGs were radiolabeled with 89 Zr IV , and the integrity of the radioconjugates was assessed over several days in vitro and in vivo. While all three radioconjugates remained >95% intact over 5 days in human plasma, the in vivo study in healthy mice revealed higher physiologic stability of the DFO and DFO* radiochelates over bifunctional THPN conjugates. This was evidenced by increased bone uptake of osteophilic 89 Zr IV for THPN. This finding contrasts with the exceptionally high thermodynamic stability of the chelate and suggests either a kinetic or metabolic lability, or may stem from coordinative changes due to the covalent conjugation of the 89 Zr-THPN radiochelate as suggested by density functional theory (DFT) calculations. These important findings inform the design of next generation 3,4-HOPO chelates with the aim of improving the physiologic stability. This study furthermore demonstrates how HPG can be used as a robust carrier tool to assess and compare the long-term in vivo stability of radiochelates.

Polymeric microfluidic chips offer a number of benefits compared to their glass equivalents, including lower material costs and ease and flexibility of fabrication. However, the main drawback of polymeric materials is often their limited resistance to (organic) solvents. Previously, thiol-ene materials were shown to be more solvent resistant than most other commonly used polymers; however, they still fall short in "harsh" chemical environments, such as when chlorinated solvents are present. Here, we show that a simple yet effective treatment of thiol-ene materials results in exceptional solvent compatibility, even for very challenging chemical environments. Our approach, based on a temperature treatment, results in a 50-fold increase in the chloroform compatibility of thiol-enes (in terms of longevity). We show that prolonged heat exposure allows for the operation of the microfluidic chips in chloroform for several days with no discernable deformation or solvent-induced swelling. The method is applicable to many different thiol-ene-based materials, including commercially available formulations, and also when using other commonly considered "harsh" solvents. To demonstrate the utility of the solvent compatible thiol-enes for applications where chloroform is frequently employed, we show the continuous and uniform production of polymeric microspheres for drug delivery purposes over a period of 8 hours. The material thus holds great promise as an alternative choice for microfluidic applications requiring harsh chemical environments, a domain so far mainly restricted to glass chips.

Purpose: The purpose of this study was to demonstrate the feasibility of using a custom gradient sequence on an unmodified 3T magnetic resonance imaging (MRI) scanner to perform magnetic resonance navigation (MRN) by investigating the blood flow control method in vivo, reproducing the obtained rheology in a phantom mimicking porcine hepatic arterial anatomy, injecting magnetized microbead aggregates through an implantable catheter, and steering the aggregates across arterial bifurcations for selective tumor embolization., Materials and Methods: In the first phase, arterial hepatic velocity was measured using cine phase-contrast imaging in seven pigs under free-flow conditions and controlled-flow conditions, whereby a balloon catheter is used to occlude arterial flow and saline is injected at different rates. Three of the seven pigs previously underwent selective lobe embolization to simulate a chemoembolization procedure. In the second phase, the measured in vivo controlled-flow velocities were approximately reproduced in a Y-shaped vascular bifurcation phantom by injecting saline at an average rate of 0.6 mL/s with a pulsatile component. Aggregates of 200-μm magnetized particles were steered toward the right or left hepatic branch using a 20-mT/m MRN gradient. The phantom was oriented at 0°, 45°, and 90° with respect to the B 0 magnetic field. The steering differences between left-right gradient and baseline were calculated using Fisher's exact test. A theoretical model of the trajectory of the aggregate within the main phantom branch taking into account gravity, magnetic force, and hydrodynamic drag was also designed, solved, and validated against the experimental results to characterize the physical limitations of the method., Results: At an injection rate of 0.5 mL/s, the average flow velocity decreased from 20 ± 15 to 8.4 ± 5.0 cm/s after occlusion in nonembolized pigs and from 13.6 ± 2.0 to 5.4 ± 3.0 cm/s in previously embolized pigs. The pulsatility index measured to be 1.7 ± 1.8 and 1.1 ± 0.1 for nonembolized and embolized pigs, respectively, decreased to 0.6 ± 0.4 and 0.7 ± 0.3 after occlusion. For MRN performed at each orientation, the left-right distribution of aggregates was 55%, 25%, and 75% on baseline and 100%, 100%, and 100% (P < 0.001, P = 0.003, P = 0.003) after the application of MRN, respectively. According to the theoretical model, the aggregate reaches a stable transverse position located toward the direction of the gradient at a distance equal to 5.8% of the radius away from the centerline within 0.11 s, at which point the aggregate will have transited through a longitudinal distance of 1.0 mm from its release position., Conclusion: In this study, we showed that the use of a balloon catheter reduces arterial hepatic flow magnitude and variation with the aim to reduce steering failures caused by fast blood flow rates and low magnetic steering forces. A mathematical model confirmed that the reduced flow rate is low enough to maximize steering ratio. After reproducing the flow rate in a vascular bifurcation phantom, we demonstrated the feasibility of MRN after injection of microparticle aggregates through a dedicated injector. This work is an important step leading to MRN-based selective embolization techniques in humans., (© 2018 American Association of Physicists in Medicine.)

A common form of treatment for patients with hepatocellular carcinoma (HCC) is transarterial radioembolization (TARE) with non-degradable glass or resin microspheres (MS) labeled with 90 Y ( 90 Y-MS). To further simplify the dosimetry calculations in the clinical setting, to have more control over the particle size and to change the permanent embolization to a temporary one, we developed uniformly-sized, biodegradable 188 Re-labeled MS ( 188 Re-MS) as a new and easily imageable TARE agent. Methods: MS made of poly( L -lactic acid) were produced in a flow focusing microchip. The MS were labeled with 188 Re using a customized kit. An orthotopic HCC animal model was developed in male Sprague Dawley rats by injecting N1-S1 cells directly into the liver using ultrasound guidance. A suspension of 188 Re-MS was administered via hepatic intra-arterial catheterization 2 weeks post-inoculation of the N1-S1 cells. The rats were imaged by SPECT 1, 24, 48, and 72 h post-radioembolization. Results: The spherical 188 Re-MS had a diameter of 41.8 ± 6.0 µm ( CV = 14.5%). The site and the depth of the injection of N1-S1 cells were controlled by visualization of the liver in sonograms. Single 0.5 g tumors were grown in all rats. 188 Re-MS accumulated in the liver with no deposition in the lungs. 188 Re decays to stable 188 Os by emission of β ¯ particles with similar energy to those emitted by 90 Y while simultaneously emitting γ photons, which were imaged directly by single photon computed tomography (SPECT). Using Monte Carlo methods, the dose to the tumors was calculated to be 3-6 times larger than to the healthy liver tissue. Conclusions: 188 Re-MS have the potential to become the next generation of β ¯ -emitting MS for TARE. Future work revolves around the investigation of the therapeutic potential of 188 Re-MS in a large-scale, long-term preclinical study as well as the evaluation of the clinical outcomes of using 188 Re-MS with different sizes, from 20 to 50 µm., Competing Interests: Competing Interests: The authors have declared that no competing interest exists.

Dual-isotope (DI) studies offer a number of advantages in pre-clinical imaging. These include: reducing study times when compared with sequential scans, reducing the number of animals required for any given study, and most importantly, producing images perfectly registered in space and time that provide simultaneous information about two distinct body functions. The ability of single photon emission computed tomography (SPECT) to measure and differentiate energies of the emitted photons makes it well suited for DI imaging. However, since scattered photons originating from one radioisotope may be detected in the energy window of the other and thus degrade image quality and quantitative accuracy, scatter and crosstalk corrections must be applied. The decay characteristics of 111 In and 67 Ga, which are suitable for quantitative DI imaging for up to 2 weeks post-injection, led us to investigate the performance of simultaneous 111 In/ 67 Ga SPECT imaging using a small-animal pre-clinical scanner. A series of phantom experiments were performed to investigate image quality and accuracy of activity quantification in 111 In/ 67 Ga images acquired with three different collimators and reconstructed from different photopeak combinations. The triple energy window (TEW) method was used to correct for scatter and crosstalk. Based on these phantom studies, the optimal selection of collimator and energy window settings was determined. When using these optimal settings, submillimeter-size structures were distinguishable in the reconstructed images and quantification errors below 20% were achieved for both isotopes. The optimal parameters were subsequently applied to an in vivo animal study. The determination of the distinct pharmacokinetic profiles of two polymer radiopharmaceuticals injected simultaneously, but by different administration routes (intravenously and intraperitoneally) into a single animal demonstrated the feasibility of simultaneous 111 In/ 67 Ga SPECT.

Pulmonary tuberculosis (TB), which is caused by Mycobacterium tuberculosis ( Mtb) , remains a global pandemic, despite the widespread use of the parenteral live attenuated Bacillus Calmette-Guérin (BCG) vaccine during the past decades. Mucosal administration of next generation TB vaccines has great potential, but developing a safe and efficacious mucosal vaccine is challenging. Hence, understanding the in vivo biodistribution and pharmacokinetics of mucosal vaccines is essential for shaping the desired immune response and for optimal spatiotemporal targeting of the appropriate effector cells in the lungs. A subunit vaccine consisting of the fusion antigen H56 (Ag85B-ESAT-6-Rv2660) and the liposome-based cationic adjuvant formulation (CAF01) confers efficient protection in preclinical animal models. In this study, we devise a novel immunization strategy for the H56/CAF01 vaccine, which comply with the intrapulmonary (i.pulmon.) route of immunization. We also describe a novel dual-isotope ( 111 In/ 67 Ga) radiolabeling approach, which enables simultaneous non-invasive and longitudinal SPECT/CT imaging and quantification of H56 and CAF01 upon parenteral prime and/or i.pulmon. boost immunization. Our results demonstrate that the vaccine is distributed evenly in the lungs, and there are pronounced differences in the pharmacokinetics of H56 and CAF01. We provide convincing evidence that the H56/CAF01 vaccine is not only well-tolerated when administered to the respiratory tract, but it also induces strong lung mucosal and systemic IgA and polyfunctional Th1 and Th17 responses after parenteral prime and i.pulmon. boost immunization. The study furthermore evaluate the application of SPECT/CT imaging for the investigation of vaccine biodistribution after parenteral and i.pulmon. immunization of mice.

H 4 octox, a versatile new octadentate acyclic chelating ligand, has been investigated as an alternative to the acyclic DTPA and the macrocyclic DOTA for trivalent metal ions useful in diagnostic medical imaging or therapeutic applications (Y 3+ , In 3+ , La 3+ , Gd 3+ , Lu 3+ ). The synthesis of H 4 octox is straightforward in less steps and thus more economical than those of most previously reported chelators. Complex formation equilibria in the presence of Y 3+ , In 3+ , La 3+ , Gd 3+ , and Lu 3+ revealed fast chelation and high metal-sequestering capacity. Quantitative labeling with 111 In 3+ was achieved within 15 min at room temperature at ligand concentrations as low as 10 -7 M, exactly the properties required for the development of kit-based radiopharmaceuticals. In vitro serum stability studies and in vivo SPECT imaging confirmed excellent complex stability of [ 111 In(octox)] - . Moreover, it is more lipophilic than most of the multidentate carboxylate- or picolinate-based chelators; it therefore shows more liver clearance and provides a complementary choice in the design of metal-based pharmaceuticals and in the tuning of their pharmacokinetic properties. Finally, H 4 octox showed a large fluorescence enhancement upon complexation with different metals, in particular, with Y 3+ and Lu 3+ , which could be useful for non-radioactive fluorescent stability and cell studies as well as bimodal imaging. Excellent in vitro stability of [Y(octox)] - against transferrin and Fe 3+ was confirmed employing this fluorescence.

Using compact desktop NMR systems for rapid characterization of relaxation properties directly after synthesis can expedite the development of functional magnetic nanoparticles. Therefore, an automated system that combines a miniaturized NMR relaxometer and a flow-based microreactor for online synthesis and characterization of magnetic iron oxide nanoparticles is constructed and tested. NMR relaxation properties are quantified online with a 0.5 T permanent magnet for measurement of transverse ( T 2 ) and longitudinal ( T 1 ) relaxation times. Nanoparticles with a primary particle size of about 25 nm are prepared by coprecipitation in a tape-based microreactor that utilizes 3D hydrodynamic flow focusing to avoid channel clogging. Cluster sizes are expeditiously optimized for maximum transverse relaxivity of 115.5 mM s -1 . The compact process control system is an efficient tool that speeds up synthesis optimization and product characterization of magnetic nanoparticles for nanomedical, theranostic, and NMR-based biosensing applications.

Droplet microfluidics technology has recently been introduced to generate particles for many biomedical applications that include therapeutic embolizing agents in hepatic, uterine or bronchial arteries. Embolic agents are available in a variety of shapes and sizes that are adjusted according to the target vessel characteristics. Magnetic embolic agents can additionally be navigated to the target location (e.g., a tumor) through the blood system by applying an external magnetic field. This technology is termed Magnetic Resonance Navigation (MRN). Here we introduce a high throughput method to produce homogeneously sized magnetic microspheres (MMS) as blood vessel embolic agents for use in combination with MRN. The system for MMS production consists of a simple 3D printed micro coflowing device that is able to produce biocompatible, degradation rate controllable poly(lactic- co -glycolic acid) (PLGA) microspheres encasing magnetic nanoparticles. Axisymmetric flow is obtained with a central needle injecting the dispersed phase surrounded by a continuous phase and leads to the formation of size-controlled droplets that turn into homogeneously sized MMS linearly dependent on the inner needle diameter. MMS morphology, mean particle size and size distribution were quantified from SEM images. Magnetic performance of MMS was investigated using a vibrating sample magnetometer. MMS were nontoxic toward HUVEC (human umbilical vein endothelial cells) and HEK293 (human embryonic kidney) cells. The presented micro coflowing method allows for the reliable production of large MMS sized 130-700 μm with narrow size distribution (CV < 7%) and magnetic properties useful for MRN.

Polymeric nanocarriers are promising entities for cancer diagnosis and therapy. The aim of such nanocarriers is to selectively accumulate in cancerous tissue that is difficult to visualize or treat. The passive accumulation of a nanocarrier in a tumor through extravasation is often attributed to the enhanced permeation and retention (EPR) effect and the size and shape of the nanocarrier. However, the tumor microenvironment is very heterogeneous and the intratumoral pressure is usually high, leading to different opinions about how the EPR of nanocarriers through the irregular vasculature of a tumor leads to accumulation. In order to investigate this topic, we studied methods for the determination of pharmacokinetic parameters, biodistribution and the tumor uptake of nanocarriers. More specifically, we used non-invasive quantitative Single-Photon Emission Computed Tomography/Computed Tomography (qSPECT/CT) imaging of hyperbranched polyglycerols (HPGs) to explore the specific biodistribution and tumor uptake of six model nanocarriers in Rag2m mice. We were interested to see if a distinct molecular weight (MW) of nanocarriers (HPG 25, 50, 100, 200, 300, 500 kDa) is favoured by the tumor. To trace the model nanocarriers, HPGs were covalently linked to the strong chelator desferrioxamine (DFO), and radiolabeled with the gamma emitter 67 Ga (EC = 100%, E γ = 185 keV (21.4%), 300 keV (16.6%), half-life = 3.26 d). Without the need for blood collection, but instead using qSPECT/CT imaging inside the heart, the blood circulation half-lives of the 67 Ga labeled HPGs were determined and increased from 9.9 ± 2.9 to 47.8 ± 7.9 hours with increasing polymer MW. Total tumor accumulation correlated positively with the circulation time of the HPGs. Comparing the tumor-to-blood ratio dynamically revealed how blood and tumor concentrations of the nanocarrier change over time and when equilibrium is reached. The time of equilibrium is size-dependent and increases with molecular weight. Furthermore, the data indicate that for larger MWs, nanocarrier uptake and retention by the tumor is size independent. Further studies are necessary to advance our understanding of the interplay between MW and nanoparticle accumulation in tumors., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Magnetic Particle Imaging (MPI) is an emerging, whole body biomedical imaging technique, with sub-millimeter spatial resolution and high sensitivity to a biocompatible contrast agent consisting of an iron oxide nanoparticle core and a biofunctionalized shell. Successful application of MPI for imaging of cancer depends on the nanoparticles (NPs) accumulating at tumors at sufficient levels relative to other sites. NPs' physiochemical properties such as size, crystallographic structure and uniformity, surface coating, stability, blood circulation time and magnetization determine the efficacy of their tumor accumulation and MPI signal generation. Here, we address these criteria by presenting strategies for the synthesis and surface functionalization of efficient MPI tracers, that can target a typical murine brain cancer model and generate three dimensional images of these tumors with very high signal-to-noise ratios (SNR). Our results showed high contrast agent sensitivities that enabled us to detect 1.1 ng of iron (SNR ∼ 3.9) and enhance the spatial resolution to about 600 μm. The biodistribution of these NPs was also studied using near-infrared fluorescence (NIRF) and single-photon emission computed tomography (SPECT) imaging. NPs were mainly accumulated in the liver and spleen and did not show any renal clearance. This first pre-clinical study of cancer targeted NPs imaged using a tomographic MPI system in an animal model paves the way to explore new nanomedicine strategies for cancer diagnosis and therapy, using clinically safe magnetic iron oxide nanoparticles and MPI.

As the field of nanomedicine emerges, there is a lag in research surrounding the topic of nanoparticle (NP) toxicity, particularly concerned with mechanisms of action. The continuous emergence of bacterial resistance has challenged the research community to develop novel antibiotic agents. Metal NPs are among the most promising of these because show strong antibacterial activity. This review summarizes and discusses proposed mechanisms of antibacterial action of different metal NPs. These mechanisms of bacterial killing include the production of reactive oxygen species, cation release, biomolecule damages, ATP depletion, and membrane interaction. Finally, a comprehensive analysis of the effects of NPs on the regulation of genes and proteins (transcriptomic and proteomic) profiles is discussed.

Zirconium-89 ( 89 Zr) is an ideal radiometal isotope for antibody-based positron emission tomography (immunoPET) as its physical half-life (3.27 days) is a good match with the biological half-life of larger molecular weight targeting molecules, such as antibodies (3-4 days), and its positron emission (BR = 100% EC/β + , E β + ,avg = 395.5 keV) is suited for high resolution PET imaging. Concerns over the in vivo stability of the most commonly used 89 Zr-chelator, desferrioxamine B (DFO), have spurred efforts into the development of alternative 89 Zr-chelators that withstand the release of osteophilic 89 Zr 4+ . Herein we report the new chelator 1,3-propanediamine-N,N,N',N'-tetrakis[(2-(aminomethyl)-3-hydroxy-1,6-dimethyl-4(1H)-pyridinone)acetamide] (THPN) based on four 3-hydroxy-4-pyridinone (3,4-HOPO) coordinating groups, as a potentially superior chelator over DFO. THPN has been demonstrated to quantitatively form a monometallic complex with Zr 4+ within 10 min at ambient temperature at as low as 10 -6 M concentrations of the chelator. The resulting complexes were studied in vitro and in vivo. The 89 Zr-THPN complex was stable in serum and outperformed the 89 Zr-DFO complex in a direct transchelation challenge. Healthy mice excreted 89 Zr-THPN rapidly without signs of demetalation or residual organ uptake. This renders THPN as a promising alternative to DFO and introduces the first octadentate 3,4-HOPO chelator to the field.

The main applications of 188 Re in radionuclide therapies include trans-arterial liver radioembolization and palliation of painful bone-metastases. In order to optimize 188 Re therapies, the accurate determination of radiation dose delivered to tumors and organs at risk is required. Single photon emission computed tomography (SPECT) can be used to perform such dosimetry calculations. However, the accuracy of dosimetry estimates strongly depends on the accuracy of activity quantification in 188 Re images. In this study, we performed a series of phantom experiments aiming to investigate the accuracy of activity quantification for 188 Re SPECT using high-energy and medium-energy collimators. Objects of different shapes and sizes were scanned in Air, non-radioactive water (Cold-water) and water with activity (Hot-water). The ordered subset expectation maximization algorithm with clinically available corrections (CT-based attenuation, triple-energy window (TEW) scatter and resolution recovery was used). For high activities, the dead-time corrections were applied. The accuracy of activity quantification was evaluated using the ratio of the reconstructed activity in each object to this object's true activity. Each object's activity was determined with three segmentation methods: a 1% fixed threshold (for cold background), a 40% fixed threshold and a CT-based segmentation. Additionally, the activity recovered in the entire phantom, as well as the average activity concentration of the phantom background were compared to their true values. Finally, Monte-Carlo simulations of a commercial [Formula: see text]-camera were performed to investigate the accuracy of the TEW method. Good quantification accuracy (errors  <10%) was achieved for the entire phantom, the hot-background activity concentration and for objects in cold background segmented with a 1% threshold. However, the accuracy of activity quantification for objects segmented with 40% threshold or CT-based methods decreased (errors  >15%), mostly due to partial-volume effects. The Monte-Carlo simulations confirmed that TEW-scatter correction applied to 188 Re, although practical, yields only approximate estimates of the true scatter.