Search

Accurate wavelength calibration is critical for qualitative and quantitative spectroscopic measurements. Many spectrometers for planetary exploration are equipped with onboard calibration sources. However, such calibration sources are not always available because planetary lander missions often have strong limitations in size and mass. In this study, we propose and validate a wavelength calibration method using solar Fraunhofer lines observed in reflective spectra. As a result, for a visible Raman spectrometer, the accuracy is better than 0.6 cm-1 in 0-4000 cm-1 range, and the magnesium abundance of olivine is estimated more accurately than 2%.

Efficient and compact frequency converters are essential for frequency stabilization of terahertz sources. In this paper, we present a 3.5-THz, x6-harmonic, integrated Schottky diode mixer operating at room temperature. The designed frequency converter is based on a single-ended, planar Schottky diode with a sub-micron anode contact area defined on a suspended 2-$\mu$m ultra-thin GaAs substrate. The dc-grounded anode pad was combined with the radio frequency E-plane probe, which resulted in an electrically compact circuit. At 200 MHz intermediate frequency, a mixer conversion loss of about 59 dB is measured and resulting in a 40 dB signal-to-noise ratio for phase locking 3.5-THz quantum-cascade laser. Using a quasi-static diode model combined with electromagnetic simulations, good agreement with the measured results was obtained. Harmonic frequency converters without the need of cryogenic cooling will help in the realization of highly sensitive space and air-borne heterodyne receivers., Comment: Submitted to IEEE-TST

Interstitial magnesium acts as a moderately deep double donor in silicon, and is relatively easily introduced by diffusion. Unlike the case of the chalcogen double donors, the binding energies of the even-parity valley-orbit excited states 1sT$_2$ and 1sE have remained elusive. Here we report on temperature dependence absorption measurements focusing on the neutral charge species. Our results demonstrate thermal activation from the ground state 1sA to the valley-orbit states, as observed by transitions from the thermally populated levels to the odd-parity states 2p$_0$ and 2p$_{\pm}$, Comment: 3 pages, 2 figures

Recent attacks using thermal laser stimulation (TLS) have shown that it is possible to extract cryptographic keys from the battery-backed memory on state-of-the-art field-programmable gate arrays (FPGAs). However, the professional failure analysis microscopes usually employed for these attacks cost in the order of 500k to 1M dollars. In this work, we evaluate the use of a cheaper commercial laser fault injection station retrofitted with a suitable amplifier and light source to enable TLS. We demonstrate that TLS attacks are possible at a hardware cost of around 100k dollars. This constitutes a reduction of the resources required by the attacker by a factor of at least five. We showcase two actual attacks: data extraction from the SRAM memory of a low-power microcontroller and decryption key extraction from a 20-nm technology FPGA device. The strengths and weaknesses of our low-cost approach are then discussed in comparison with the conventional failure analysis equipment approach. In general, this work demonstrates that TLS backside attacks are available at a much lower cost than previously expected.

Information and communication technologies have accompanied our everyday life for years. A steadily increasing number of computers, cameras, mobile devices, etc. generate more and more data, but at the same time we realize that the data can only partially be analyzed with classical approaches. The research and development of methods based on artificial intelligence (AI) made enormous progress in the area of interpretability of data in recent years. With growing experience, both, the potential and limitations of these new technologies are increasingly better understood. Typically, AI approaches start with the data from which information and directions for action are derived. However, the circumstances under which such data are collected and how they change over time are rarely considered. A closer look at the sensors and their physical properties within AI approaches will lead to more robust and widely applicable algorithms. This holistic approach which considers entire signal chains from the origin to a data product, "Sensor AI", is a highly relevant topic with great potential. It will play a decisive role in autonomous driving as well as in areas of automated production, predictive maintenance or space research. The goal of this white paper is to establish "Sensor AI" as a dedicated research topic. We want to exchange knowledge on the current state-of-the-art on Sensor AI, to identify synergies among research groups and thus boost the collaboration in this key technology for science and industry., Comment: 4 pages. 1st Workshop on Sensor Artificial Intelligence, Apr. 2020, Berlin, Germany

Isotopic enrichment offers cutting-edge properties of materials opening exciting research and development opportunities. In semiconductors, reached progress of ultimate control in growth and doping techniques follows nowadays the high level isotopic purification. This requires deep understanding of isotopic disorder effects and techniques of their effective determination. Isotopic content of both crystal lattice and impurity centers cause the effects, which can be examined by different optical techniques. While disorder in the host lattice can be straight forward evaluated by inelastic light scattering or by SIMS measurements, determination of isotopic contributions of many orders less presented impurities remains challenging and usually observed in high-resolution photoluminescence or optical absorption spectra. Boron-doped diamonds exhibit complex infrared absorption spectra while boron-related luminescence remains unobserved. Boron, as a most light element acting as a hydrogen-like dopant in elemental semiconductors, has a largest relative difference in its isotope masses, and by this, cause the largest isotopic disorder in semiconductors, including diamond, an elemental semiconductor with the lightest atomic mass of a host lattice. This enables an access to the isotopic constitution of boron in diamond by infrared absorption spectroscopy. By comparison of low-temperature absorption spectra of a natural (20% of 10B and 80% of 11B isotopes) and 11B enriched (up to 99%) doped diamonds we differentiate the intracenter transitions related to 10B and to 11B isotopes. We have found that the isotopic spectral lines of the same boron intracenter transition are separated with the energy of about 0.7 meV. This is the largest impurity isotopic shift ever observed in semiconductors doped by hydrogen-like impurity centers.

We report on the inelastic-scattering rate of electrons on phonons and relaxation of electron energy studied by means of magnetoconductance, and photoresponse, respectively, in a series of strongly disordered superconducting NbN films. The studied films with thicknesses in the range from 3 to 33 nm are characterized by different Ioffe-Regel parameters but an almost constant product q_Tl(q_T is the wave vector of thermal phonons and l is the elastic mean free path of electrons). In the temperature range 14-30 K, the electron-phonon scattering rates obey temperature dependencies close to the power law 1/\tau_{e-ph} \sim T^n with the exponents n = 3.2-3.8. We found that in this temperature range \tau_{e-ph} and n of studied films vary weakly with the thickness and square resistance. At 10 K electron-phonon scattering times are in the range 11.9-17.5 ps. The data extracted from magnetoconductance measurements were used to describe the experimental photoresponse with the two-temperature model. For thick films, the photoresponse is reasonably well described without fitting parameters, however, for thinner films, the fit requires a smaller heat capacity of phonons. We attribute this finding to the reduced density of phonon states in thin films at low temperatures. We also show that the estimated Debye temperature in the studied NbN films is noticeably smaller than in bulk material., Comment: 23 pages, 6 figures

In this text, results of a 0.35 terahertz (THz) dynamic aperture imaging approach are presented. The experiments use an optical modulation approach and a single pixel detector at a stand-off imaging distance of approx 1 meter. The optical modulation creates dynamic apertures of 5cm diameter with approx 2000 individually controllable elements. An optical modulation approach is used here for the first time at a large far-field distance, for the investigation of various test targets in a field-of-view of 8 x 8 cm. The results highlight the versatility of this modulation technique and show that this imaging paradigm is applicable even at large far-field distances. It proves the feasibility of this imaging approach for potential applications like stand-off security imaging or far field THz microscopy., Comment: 9 pages, 13 figures

We use the greatly improved optical linewidths provided by highly enriched $^{28}$Si to study a photoluminescence line near 1017 meV previously observed in the luminescence spectrum of natural Si diffused with Mg, and suggested to result from the recombination of an isoelectronic bound exciton localized at a Mg-pair center. In $^{28}$Si this no-phonon line is found to be comprised of five components whose relative intensities closely match the relative abundances of Mg-pairs formed by random combinations of the three stable isotopes of Mg, thus confirming the Mg-pair hypothesis. We further present the results of temperature dependence studies of this center that reveal unusual and as yet unexplained behaviour., Comment: 5 pages, 4 figures

The deep double donor levels of substitutional chalcogen impurities in silicon have unique optical properties which may enable a spin/photonic quantum technology. The interstitial magnesium impurity (Mg$_i$) in silicon is also a deep double donor but has not yet been studied in the same detail as have the chalcogens. In this study we look at the neutral and singly ionized Mg$_i$ absorption spectra in natural silicon and isotopically enriched 28-silicon in more detail. The 1s(A$_1$) to 1s(T$_2$) transitions, which are very strong for the chalcogens and are central to the proposed spin/photonic quantum technology, could not be detected. We observe the presence of another double donor (Mg$_{i*}$) that may result from Mg$_i$ in a reduced symmetry configuration, most likely due to complexing with another impurity. The neutral species of Mg$_{i*}$ reveal unusual low lying ground state levels detected through temperature dependence studies. We also observe a shallow donor which we identify as a magnesium-boron pair.

In this contribution, we explore the imaging limits of terahertz single-pixel cameras and present a way to improve the achievable signal-to-noise ratio and spatial resolution using a technique called dithering masks. The proposed procedure is implemented on the hardware level using recent advances in the development of spatial light modulators for terahertz single-pixel cameras. Thereby, our approach offers new ways to overcome theoretical imaging limits of near wavelength resolution. We suggest that in using dithering masks the required phase retrieval driven recovery can be simplified to a robust non-negative linear model even for near wavelength terahertz single-pixel imaging., Comment: 5 pages, 5 figures

Terahertz (THz) radiation meaning electromagnetic radiation in the range from 0.1 THz (3 mm) to 10 THz (30 mu) has the unique advantage of easily penetrating many obstructions while being non-hazardous to organic tissue since it is non-ionizing. A shortcoming of this domain is the limited availability of high-sensitivity detector arrays respective THz cameras with >1k pixels. To overcome the imaging limitations of the THz domain, compressive imaging in combination with an optically controllable THz spatial light modulator is a promising approach especially when used in a single-pixel imaging modality. The imaging fidelity, performance and speed of this approach depend crucially on the imaging patterns also called masks and their properties used in the imaging process. Therefore, in this paper, it is investigated how the image quality after reconstruction is specifically influenced by the different mask types and their properties in a compressive imaging modality. The evaluation derives specific guidelines for the use in THz single-pixel imaging setups respective THz single-pixel cameras employing optically controllable THz spatial light modulators. As an outlook, a method is suggested that builds upon the results presented in this text and extends the discussed advantages to an improved compressive imaging setting fit for stand-off security imaging applications aka single-pixel detector Body Scanners., Comment: 10 pages, 5 figures

We present the upGREAT THz heterodyne arrays for far-infrared astronomy. The Low Frequency Array (LFA) is designed to cover the 1.9-2.5 THz range using 2x7-pixel waveguide-based HEB mixer arrays in a dual polarization configuration. The High Frequency Array (HFA) will perform observations of the [OI] line at ~4.745 THz using a 7-pixel waveguide-based HEB mixer array. This paper describes the common design for both arrays, cooled to 4.5 K using closed- cycle pulse tube technology. We then show the laboratory and telescope characterization of the first array with its 14 pixels (LFA), which culminated in the successful commissioning in May 2015 aboard the SOFIA airborne observatory observing the [CII] fine structure transition at 1.905 THz. This is the first successful demonstration of astronomical observations with a heterodyne focal plane array above 1 THz and is also the first time high- power closed-cycle coolers for temperatures below 4.5 K are operated on an airborne platform., Comment: accepted for publication in IEEE Transactions on Terahertz Science and Technology

Light-scattering in the terahertz region is demonstrated for granular matter. A quantum-cascade laser is used in a benchtop setup to determine the angle-dependent scattering of spherical grains as well as coffee powder and sugar grains. For the interpretation of the form factors for the scattering from single particles one has to go beyond the usual Rayleigh-Gans-Debye theory and apply calculations within Mie theory. In addition to single scattering also collective correlations can be identified and extracted as a static structure factor., Comment: 7 pages, 12 figures

We present systematic measurements of the temperature-dependence of detection efficiencies in TaN and NbN superconducting nanowire single-photon detectors. We have observed a clear increase of the cut-off wavelength with decreasing temperature that we can qualitatively describe with a temperature-dependent diffusion coefficient of the quasi-particles created after photon absorption. Furthermore, the detection efficiency at wavelengths shorter than the cut-off wavelength as well as at longer wavelengths exhibit distinct temperature dependencies. The underlying causes and possible consequences for microscopic detection models are discussed., Comment: 5 pages, 3 figures, presented at ASC 2012, accepted for publication in special issue of IEEE Trans. Appl. Supercond. Small changes in text and figures in response to reviewer comments

We investigate the gas dynamics and the physical properties of photodissociation regions (PDRs) in IC1396A, which is an illuminated bright-rimmed globule with internal structures created by young stellar objects. Our mapping observations of the [CII] emission in IC1396A with GREAT onboard SOFIA revealed the detailed velocity structure of this region. We combined them with observations of the [CI] 3P_1 - 3P_0 and CO(4-3) emissions to study the dynamics of the different tracers and physical properties of the PDRs. The [CII] emission generally matches the IRAC 8 micron, which traces the polycyclic aromatic hydrocarbon (PAH) emissions. The CO(4-3) emission peaks inside the globule, and the [CI] emission is strong in outer regions, following the 8 micron emission to some degree, but its peak is different from that of [CII]. The [CII] emitting gas shows a clear velocity gradient within the globule, which is not significant in the [CI] and CO(4-3) emission. Some clumps that are prominent in [CII] emission appear to be blown away from the rim of the globule. The observed ratios of [CII]/[CI] and [CII]/CO(4-3) are compared to the KOSMA-tau PDR model, which indicates a density of 10^4-10^5 cm-3., Comment: 4 pages with 3 figures, accepted for publication in A&A (SOFIA/GREAT special issue)

Materials with a small superconducting energy gap are expected to favor a high detection efficiency of low-energy photons in superconducting nanowire single-photon detectors. We developed a TaN detector with smaller gap and lower density of states at the Fermi energy than in comparable NbN devices, while other relevant parameters remain essentially unchanged. The observed reduction of the minimum photon energy required for direct detection is in line with model predictions of $\approx1/3$ as compared to NbN., Comment: 9 pages incl. 1 table and 2 figures; corrected typos in table 1

We have studied supercurrent-assisted formation of the resistive state in nano-structured Nb and NbN superconducting films after absorption of a single photon. In amorphous narrow NbN strips the probability of the resistive state formation has a pronounced spectral cut-off. The corresponding threshold photon energy decreases with the bias current. Analysis of the experimental data in the framework of the generalized hot-spot model suggests that the quantum yield for near-infrared photons increases faster than the photon nergy. Relaxation of the resistive state depends on the photon energy making the phenomenon feasible for the development of energy resolving single-photon detectors., Comment: 9 pages, 9 figures, submitted to Eur. Phys. Journal