Search

The effect of thermal aging on the electrical properties of the insulating oil used for transformers has been explored in this experimental work. In particular the dielectric dissipation factor, the resistivity and the breakdown voltage have been measured and correlated. The numerical results predicted by mathematical model and those measured in the laboratory have been compared by using a regression analysis. Experiments on thermal aging were performed on insulating oil (Borak 22, Nynas, Austria) during a period of time of 5000-h at three different temperatures. First, the transformer oil's dielectric dissipation factor, the resistivity and the breakdown voltage are measured after every 500 h of aging. Then, polynomial and exponential regression expressions are proposed for modelling the oil's electrical parameters variations with thermal ageing at different aging temperatures and periods. The results show that after thermal aging, the resistivity and the breakdown voltage decrease with thermal aging, however, the dielectric dissipation factor which increases. This trend is similar for all different aging temperatures. The numerical results show close agreement with the measured results for all the samples and all studied properties. The regression model presents strong correlation with high coefficients (>94%). [ABSTRACT FROM AUTHOR]

The growing environmental challenge of electrical energy systems has prompted a substantial increase in renewable energy generation. Such generation systems allow for significant reduction of CO2 emissions compared with a traditional fossil fuel plant. Furthermore, several improvements in power systems network configuration and operation combined with new technologies have enabled reduction of losses and energy demand, thus contributing to reduction of CO2 emissions. Another environmental threat identified in electrical networks is the leaking of insulating sulfur hexafluoride (SF6) gas used in electrical gas insulated substations (GIS) and equipment. Because of its Global Warming Potential (GWP) of nearly 24,000 and its long life in the atmosphere (over 3000 years), SF6 gas was recognized as a greenhouse gas at the 1997 COP3; since then its use and emissions in the atmosphere have been regulated by international treaties. It is expected that as soon as an alternative insulating gas is found, SF6 use in high-voltage (HV) equipment will be banned. This paper presents an overview of the key research advances made in recent years in the quest to find eco-friendly gases to replace SF6. The review reports the main properties of candidate gases that are being investigated; in particular, natural gases (dry air, N2 or CO2) and polyfluorinated gases especially Trifluoroiodomethane (CF3I), Perfluorinated Ketones, Octafluorotetra-hydrofuran, Hydrofluoroolefin (HFOs), and Fluoronitriles are presented and their strengths and weaknesses are discussed with an emphasis on their dielectric properties (especially their dielectric strength), GWP, and boiling point with respect to the minimum operating temperature for HV power network applications. [ABSTRACT FROM AUTHOR]

Increasing demand for an alternative insulation medium to sulphur hexafluoride (SF6) has led to the investigation of new environmentally friendly insulation gases which could be used in high voltage equipment on the electrical power network. One such alternative, which is currently being explored by researchers, is Trifluoroiodomethane (CF3I) which could potentially be used in a gas mixture with carbon dioxide (CO2) as an insulation medium. In this paper an analysis of gaseous by-products detected as a result of high voltage breakdown through pure CF3I and a CF3I-CO2 gas mixture across a sphere-sphere electrode arrangement is given. Gas chromatography and mass spectrometry (GCMS) is used to identify the gaseous by-products produced as a result of high voltage arcing which causes the gas between the electrodes to dissociate. Analysing these gas by-products helps to identify the long-term behaviour of the gas mixture in high voltage equipment. [ABSTRACT FROM AUTHOR]

This paper examines the data collected from the power industry over the last six years of actual reported emissions of sulphur hexafluoride (SF6) and the potential impact. The SF6 emissions have been collated from the 14 different regions in England, Scotland, and Wales (Great Britain) from the six distribution network operators. The emissions of SF6 due to the transmission network of Great Britain have also been collated from the three different transmission network operators. By collecting this SF6 emissions data from the power industry, in both the distribution and transmission networks, an overall view of the scale of SF6 emissions in Great Britain can be evaluated. Data from the power industry also shows the inventory of SF6 power equipment in use over the last six years in Great Britain and shows the calculated percentage leakage rate of all of this equipment. In this paper, these figures, as reported by the electrical power industry to the UK government, have been used to estimate the likely inventory of SF6 equipment in England, Scotland, and Wales by 2050 and the future emissions of SF6 that could be leaked into the atmosphere by this equipment. [ABSTRACT FROM AUTHOR]