Search

The Ciprofloxacin (CIP) toxicity and salinity stress in agricultural soils cause risk to environmental and food safety. Consequently, it is essential to devise or use more effective techniques for mitigating salinity and ciprofloxacin-induced stress in soil. This study includes the nZVI-loaded biochar synthesis, integrating the unique characteristics of raw biochar with nZVI. The present study examined the impact of raw and nZVI-loaded biochar on soil quality and the mitigation of salinity stress and Ciprofloxacin toxicity in wheat plants. The results showed that the application of nZVI-loaded biochar treatments led to substantial enhancement in shoot biomass, root biomass, grain biomass, and spike biomass by 152.1, 54.3 %, 59.8 %, and 151 %, respectively compared to control treatment. The treatment with nZVI-loaded biochar significantly increased the rates of photosynthesis and transpiration, as well as the conductance of stomata. It also resulted in higher levels of intercellular CO2, photosynthetic pigments, and water use efficiency with increases of 49 %, 59 %, 57 %, 37 %, 40 %, and 95 %, respectively. The nZVI-loaded biochar significantly decreased electrolyte leakage, malondialdehyde (MDA), and hydrogen peroxide levels compared to the NaCl treatment alone. It also enhanced the activities of enzymatic antioxidants such as peroxidase (POD), superoxide dismutase (SOD), catalase (CAT), guaiacol peroxidase (GPX), and ascorbate peroxidase (APX). The non-enzymatic antioxidants including total soluble sugars (TSS), flavonoids, total soluble proteins (TSP), phenolics, ascorbic acid, anthocyanin, proline, and glycine betaine significantly influenced by the nZVI-loaded biochar. The nZVI-loaded biochar effectively alleviates the stress of soils that are contaminated with hazardous amounts of Ciprofloxacin while improving the soil and plant health.

Depleting water resources and increasing global temperature due to climate change are major challenges to agriculture and food security worldwide. Deciphering the underlying mechanisms of traits contributing to grain development and yield is essential for the development of climate-resilient cultivars. Therefore, this study assessed 105 bread wheat genotypes grown under control, drought, and heat-stress conditions for two crop seasons and performed a genome-wide association study (GWAS) using a 90k SNP array. The genotypes showed significant trait differences under all environmental conditions. Highly significant variation was observed, with moderate (50.09%) to high (76.19%) heritability in the studied germplasms. The studied traits were all also significantly positively correlated. A total of 541 significant associations (p ≤ 10−3) between marker and trait (MTAs) were observed after crossing the FDR

Cotton is considered as the main crop in the agricultural sector of Pakistan. Water deficiency in this region in recent years has reduced the chances of high yields of cotton. Selection and creation of high-yielding varieties of cotton, even in water deficit conditions, is one of urgent tasks of today. For this purpose, 40 diverse genotypes of upland cotton were screened in normal and water deficit conditions in triplicate arrangement under split plot in a randomized complete block design. All the genotypes showed significant difference under both water regimes. Ten upland cotton accessions were screened out as water deficit tolerant (VH-144, IUB-212, MNH-886, VH-295, IR-3701, AA-802, NIAB-111, NS-121, FH-113, and FH-142) and five as water deficit sensitive (IR-3, CIM-443, FH-1000, MNH-147, and S-12) based on seed cotton yield and stress susceptibility index. These tolerant and sensitive genotypes were crossed in line × tester mating design. For further evaluation of genetic material, the seed of 50 F1 crosses and their 15 parents were field planted under normal and water deficit conditions during next cotton growing season. Traits related to yield under the study showed significant variations among the accessions and their half sibs. The results of the principal component analysis (PCA) exhibited that total variation exhibited by factors 1 and factor 2 were 55.55 and 41.95%, respectively. PCA transformed the variables into three factors, and only two factors (F1 and F2) had eigenvalue > 1. The degree of dominance revealed that all parameters were highly influenced by non-additive gene action under both water regimes. Furthermore, the line VH-295 and tester CIM-443 had better yield performance under water deficit stress. The cross-combinations, viz., VH-144 × S-12, NIAB-111 × IR-3, and VH-295 × MNH-147, were the best for yield contributing traits. These combinations may be helpful for germplasm enhancement on large scale under water scarcity. All the studied traits have non-additive types of gene action suggesting the usage of these genotypes in cotton hybrid development program against water deficit tolerance.

Lodging is one of the major abiotic stresses, affecting the total crop yield and quality. The improved lodging resistance and its component traits potentially reduce the yield losses. The section modulus (SM), bending moment at breaking (M), pushing resistance (PR), and coefficient of lodging resistance (cLr) are the key elements to estimate the lodging resistance. Understanding the genetic architecture of lodging resistance–related traits will help to improve the culm strength and overall yield potential. In this study, a natural population of 795 globally diverse genotypes was further divided into two (indica and japonica) subpopulations and was used to evaluate the lodging resistance and culm strength–related traits. Significant diversity was observed among the studied traits. We carried out the genome-wide association evaluation of four lodging resistance traits with 3.3 million deep resolution single-nucleotide polymorphic (SNP) markers. The general linear model (GLM) and compressed mixed linear model (MLM) were used for the whole population and two subpopulation genome-wide association studies (GWAS), and a 1000-time permutation test was performed to remove the false positives. A total of 375 nonredundant QTLs were observed for four culm strength traits on 12 chromosomes of the rice genome. Then, 33 pleiotropic loci governing more than one trait were mined. A total of 4031 annotated genes were detected within the candidate genomic region of 33 pleiotropic loci. The functional annotations and metabolic pathway enrichment analysis showed cellular localization and transmembrane transport as the top gene ontological terms. The in silico and in vitro expression analyses were conducted to validate the three candidate genes in a pleiotropic QTL on chromosome 7. It validated OsFBA2 as a candidate gene to contribute to lodging resistance in rice. The haplotype analysis for the candidate gene revealed a significant functional variation in the promoter region. Validation and introgression of alleles that are beneficial to induce culm strength may be used in rice breeding for lodging resistance.

Abiotic stresses are the major stressors affecting wheat (Triticum aestivum L.) production worldwide. The world population is increasing continuously. It is very difficult to feed the population because one-third world’s population consumes wheat as a staple food. Among all abiotic stresses, salinity is one that led to a drastic reduction in wheat crop fitness and productivity. Thus, understanding the effects of salinity stress becomes indispensable for wheat improvement programs which have depended mainly on the genetic variations present in the wheat genome through conventional breeding. Therefore, an experiment was conducted using a complete randomized design with four replications, to determine the selection criteria for salinity-tolerant germplasm based on morphophysiological traits at the seedling stage. Three levels of salt solutions, i.e., 4, 8, and 12 dSm–1 were applied and the performance of different genotypes under these three salinities levels was observed. Results depicted that leaf water content and relative water content were correlated with each other. Notably, selection based on these traits increased the performance of other characters. The genotypes G11, G13, G18, G22, and G36 performed best in the salinity stress. So, these genotypes are considered salinity-tolerant genotypes. The genotypes G4, G17, G19, G30, and G38 performed worst in the stress and these were salinity-susceptible genotypes. From the results of the principal component (PC) analysis, the first five PCs were indicated to have a substantial genetic variation from the total of 14 PCs. These PCs showed 75, 73, 65.324, and 65.162% of total variation under normal, salinity level 4, 8, and 12 dSm–1, respectively. Stomatal conductance, fresh shoot weight and fresh root weight, and dry shoot weight and dry root weight were not significant and negatively associated with all other traits studied, except for relative water and leaf water content. Overall, the results suggested that selection based on leaf water content and relative water content at the seedling stage would genetically improve salinity tolerance. Genotypes with good performance under salt stress conditions may be useful in future breeding programs and will be effective in developing high-yielding salt-tolerant wheat varieties.

Wheat is the most widely grown and consumed crop because of its economic and social benefits. This crop is more important globally for food and feed, and its productivity is particularly vulnerable to abiotic factors. In this study, 40 wheat genotypes were studied to access the drought tolerance level using completely randomized design (CRD) in 250 ml disposable cups through morpho–physiological attributes at seedling stage. The wheat germplasm was tested under normal and two drought stress level D1 (50% field capacity) and D2 (75% field capacity) for different seedling attributes such as germination percentage (GP), chlorophyll content (CC), shoot length (SL), root length (RL), shoot fresh weight (SFW), root fresh weight (RFW), seedling fresh weight (SDFW), shoot dry weight (SDW), root dry weight (RDW), relative water content (RWC), root/shoot ratio (RS), and seedling dry weight (SeDW). The results of analysis of variance (ANOVA) and spider analysis indicate that significant amount of genetic variation was present and behavior of studied germplasm showed different behavior in different environment. The correlation analysis showed that root length has significantly positive association with root/shoot ratio, dry weight, and fresh weight while negatively correlated with shoot length and relative water content. Based on the positively associated traits, the studied genetic material would improve genetic gain for drought tolerance. The multivariate analysis showed that out 13 principal components only five PCs were significant and has eigenvalue > 1, cumulatively showed 82.33, 83.07, and 97.34% of total variation under normal, D1 and D2 conditions, respectively. Significantly, the result of spider graph and multivariate analysis showed that genotypes G47, G48, G65, G68, and G80 performed well in all drought stress conditions and considered as drought-tolerant genotypes. The best performing genotypes can be used in future breeding programs. The selection on the bases of studied attributes is effective for development of drought-tolerant and high-yielding varieties for sustainable food security.

Background The rice plant architecture is determined by spatially and temporally domesticated tiller angle. The deeper insight into the genetic mechanism for rice plant architecture will allow more efficient light capture by increasing the planting density, reproducibility, and the ability to survive in a stressful environment. Methods In this study, a natural population of 795 genotypes further divided into japonica and indica subpopulations, was evaluated for tiller angle. A significant variation with a wide range was observed. Genome-wide association analysis was performed by the general linear model (GLM), and compressed mix linear model (cMLM) for three populations to disclose the genomic associations. The population principal components and kinship matrix in 1,000 permutations were used to remove the false positives. The candidate genes were evaluated for their functional annotations and specific molecular pathways. The sequencing-based haplotype analysis was further performed to reveal the functional variation among candidate genomic regions. Results As a result, 37 significant QTLs with 93 annotated loci were identified. Among the loci, a known tiller angle controlling locus TAC1 was also identified. The introduction of the sequence pooling technique was observed fruitful to screen the 12 significant QTLs with 22 annotated loci. For ten of these loci, the functional variations were identified by haplotype analysis. These results were not only providing a better understanding of the genetic bases of rice plant architecture but also provide significant information for future breeding programs.

Dissecting the genetic basis of physiological and yield traits against tolerance to heat stress is an essential in wheat breeding programs to boost up the wheat yield for sustainable food security. Herein, a genome-wide association study (GWAS) was performed to reveal the genetic basis of heat tolerance using high-density Illumina 90K Infinium SNPs array through physiological and yield indices. These indices were phenotyped on a diverse panel of foreign and domestic genotypes of Pakistan, grown in normal and heat-stressed environments. Based on STRUCTURE analysis, the studied germplasm clustered into four sub-population. Highly significant variations with a range of moderate (58.3%) to high (77.8%) heritability was observed under both conditions. Strong positive correlation existed among physiological and yield related attributes. A total of 320 significant (-log10 P ≥ 3) marker-trait associations (MTAs) were identified for the observed characters. Out of them 169 and 151 MTAs were recorded in normal and heat stress environments, respectively. Among the MTA loci, three (RAC875_c103017_302, Tdurum_contig42087_1199, and Tdurum_contig46877_488 on chromosomes 4B, 6B, and 7B respectively), two (BobWhite_c836_422 and BS00010616_51) and three (Kukri_rep_c87210_361, D_GA8KES401BNLTU_253 and Tdurum_contig1015_131) on chromosomes 5A, 1B, and 3D at the positions 243.59cM, 77.82cM and 292.51cM) showed pleiotropic effects in studied traits under normal, heat-stressed and both conditions respectively. The present study not only authenticated the numerous previously reported MTAs for examined attributes but also revealed novel MTAs under heat-stressed conditions. Identified SNPs will be beneficial in determining the novel genes in wheat to develop the heat tolerant and best yielded genotypes to fulfill the wheat requirement for the growing population.

Determining the genetic basis of yield and water deficient tolerance in wheat is vital for wheat breeding programs. Herein, a genome-wide association study (GWAS) was performed for water deficient and yield-related attributes on wheat genotypes with high-density Illumina 90K Infinium SNP array. Major yield and drought-related attributes were phenotyped on a panel of Pakistani and foreign accessions grown in non-stressed and water deficient stressed environments during two crop cycles. Among all accessions, highly significant variations were shown in studied environments for examined characters. Water deficient conditions, reduced the wheat yield and had strong and positive correlation among relative water content and grain yield per plant. Population structure analyses based on 90,000 SNP data, classify the accessions into 4 sub-populations. Marker-trait association analyses (MTA) revealed that 134 significant SNPs were linked with yield and drought tolerance attributes. Pleotropic loci RAC875_s117925_244 and RAC875_c16333_340 located on chromosome 5A and 2A respectively, were significantly linked with relative water contents (RWC), cell membrane thermo-stability (CMT), grain per spike (GPS), spikelet per spike (SPS) and grain yield per plant (GYP). The markers Ra_c58279_684, BobWhite_c23828_341 and IAAV3414 located on chromosomes 2A, 6B and 7B respectively, showed pleotropic effects for RWC, GPS and GYP under both environments. The current experiment not only validated several MTAs reported in other studies but also discovered novel MTAs which significant under drought-stressed conditions. A total of 171 candidate genes were recognized that could be cloned and functionally characterized for the respective associated traits. For RWC and CMT, total 11 and 3 associated SNPs were mapped on coding DNA sequence (CDS) of the identified candidate genes. Isolation and characterization of the candidate genes herein mapped SNPs will be useful in discovering novel genes underpinning drought tolerance in bread wheat to fulfill the wheat demand and sustainable food security under limited water conditions.

Genetic purity is a prerequisite for exploiting the potential of hybrids in cross-pollinated crops, such as sunflower. In this regard DNA-based study was conducted using 110 simple sequence repeat (SSR) markers to check the genetic purity of 23 parents and their 60 hybrids in sunflower. The polymorphism was shown in 92 markers with value 83.63%. The SSR markers ORS-453 and CO-306 showed the highest PIC values of 0.76 and 0.74, respectively. The primer ORS-453 amplified allele size of 310 base pairs (bp) for female parent L6 and 320 bp for L11, while for male parents, T1 and T2 had allele size 350 bp and 340 bp, respectively. The hybrids from these parents showed a similar size of alleles with parents, including hybrids L6×T1 (310 bp and 350 bp), L6×T2 (310 bp and 340 bp), and L11×T2 (320 bp and 340 bp). Similarly, the primer CO-306 amplified allele size 350 bp and 330 bp for female parents L6 and L11, respectively, while, allele size 300 bp and 310 bp for male parents T1 and T2, respectively. The hybrids' allele size was like the parents viz., L6×T1 (350 bp and 300 bp), L6×T2 (350 bp and 310 bp), and L11×T2 (330 bp and 310 bp). All 60 hybrids and their 23 parents were grouped into three main clusters (A, B and C) based upon DARWIN v.6.0 and STRUCTURE v.2.3 Bayesian analyses using genotypic data. Further, each main cluster was divided into two sub-divisions. Each sub-division showed the relatedness of parents and their hybrids, thus authenticating the genetic purity of hybrids. In conclusion, this study provides useful for accurate and effective identification of hybrids, which will help to improve seed genetic purity testing globally.

In wheat crop the leaf rust is an infectious disease, threatening wheat production annually. Identification of resistance genes or markers traits associations for effective field resistance could greatly enhance our ability to breed durably resistant varieties. Herein 105 bread wheat genotypes were evaluated against the leaf rust susceptible and resistance during the two seasons 2018–19 and 2019–20 under field conditions using CI, AUDPC and FDS parameters. Based on the performance of genotypes against leaf rust pathogen, 34 genotypes categorised as resistance (R), followed by 30, 32 and 9 genotypes classified as moderately resistance (MR), moderately susceptible (MS) and susceptible (S) genotypes. respectively. We also applied a genome wide association study (GWAS) approach to identify markers trait associations (MTAs) resistance against leaf rust using 90 K SNP Array. Marker–trait association results indicated that total 56 MTAs were significantly associated at P ≤ 10−3 using Bonferroni adjustment after crossed FDR ≤ 0.05 with studied parameters under field conditions. Among them, total numbers of associated MTAs 17, 23 and 16 were identified for CI, AUDPC and FDS parameters, respectively. Maximum significant MTAs were identified on chromosomes 2A (7), 3B (7), 5A (7) followed by 4A (5), 7B (5), 1A (4) and 7A (4) in the studied genotypes. The locus (Kukri_c55051_414) showed pleotropic effects for leaf rust identified parameters on chromosome 5A at position of 68.2 cM under field conditions. This study demonstrated the use of genome-wide association mapping for the identification of potentially new genomic regions associated with studied parameters. Leaf rust resistant genotypes identified in this study proved to be more productive under preliminary field conditions against leaf rust pathogen. Thus, these resistant accessions could be used as parental genotypes in breeding programs for leaf rust resistance.

Genetic diversity is the base of any genetic improvement breeding program aimed at stress breeding. The variability among breeding materials is of primary importance in the achievements of a good crop production. Herein, 105 wheat genotypes were screened against drought stress using factorial completely randomized design at seedling stage to determine the genetic diversity and traits association conferring drought tolerance. Analysis of variances revealed that all the studied parameters differed significantly among all genotypes, indicating the significance genetic variability existed among all genotypes for studied indices. The 10 best performance genotypes G1, G6, G11, G16, G21, G26, G39, G44, G51, and G61 were screened as drought tolerant, while five lowest performance genotypes G3, G77, G91, G98, and G105 were screened as drought susceptible. Root length, chlorophyll a, chlorophyll b, and carotenoid contents were significantly correlated among themselves which exhibited the importance of these indices for rainfed areas in future wheat breeding scheme. Shoot length exhibited non-significant and negative association with other studied traits, and its selection seems not to be a promising criteria for this germplasm for drought stress. Best performance genotypes under drought stress conditions will be useful in future wheat breeding program and early selection will be effective for developing high yielding and drought tolerant wheat varieties.

Genome-wide association study (GWAS) was performed for stomata- and yield-related attributes with high-density Illumina 90 K Infinium SNP (single nucleotide polymorphism) array in bread wheat to determine genetic potential of germplasm for scarce water resources with sustainable yield potential. Major yield and stomata attributes were phenotyped on a panel of Pakistani and foreign accessions grown in non-stressed and water shortage environments during two seasons. Highly significant variations were shown among accessions in both conditions for examined characteristics. Water shortage conditions reduced the overall wheat yield and strong positive correlation existed among stomatal frequency, leaf venation and grain yield per plant. Population structure analyses based on 90,000 SNP data classified the accessions into four sub-populations which indicated the presence of genetic variability. Marker-trait association (MTA) analyses revealed that 422 significant SNPs at p ≤ 10−3, after crossing the false discovery rate (FDR) wsnp_Ex_c8913_14881924 and Tdurum_contig10598_304) were associated with flag leaf area (FLA), stomata size (SS), stomata frequency (SF), leaf venation (LV), number of grain per spike (NGS) and grain yield per plant (GYP), which were located on chromosome 4B and 6B at the positions 173.63cM and 229.64cM, respectively, under water shortage conditions. Pleotropic loci wsnp_Ex_c24167_33416760, wsnp_Ex_c5412_9564046 and Tdurum_contig81797_369 on chromosomes 7A, 2A and 4B at the positions 148.26cM, 261.05cM and 173.63cM, respectively, were significantly linked with stomata and yield indices such as FLA, SS, SF, LV, NGS and GYP under normal and water shortage conditions. The current experiment not only validated several MTAs for studied indices reported in other studies but also discovered novel MTAs significant under water shortage environments. Associated and significant SNPs will be useful in discovering novel genes underpinning water shortage tolerance in bread wheat for producing high-yielding and drought tolerant wheat varieties to fulfill the wheat demand for growing populations.

The decrease in water resources is a serious threat to food security world-wide. In this regard, a genome-wide association study (GWAS) was conducted to identify grain yield and quality-related genes/loci under normal and water-deficit conditions. Highly significant differences were exhibited among genotypes under both conditions for all studied traits. Water-deficit stress caused a reduction in grains yield and an increase in grains protein contents (GPC) and gluten contents (GLC). Population structure divided the 96 genotypes into four sub-populations. Out of 72 significant marker-trait associations (MTAs), 28 and 44 were observed under normal and water-deficit stress conditions, respectively. Pleiotropic loci (RAC875_s117925_244, BobWhite_c23828_341 and wsnp_CAP8_c334_304253) for yield and quality traits were identified on chromosomes 5A, 6B and 7B, respectively, under normal conditions. Under a water-deficit condition, the pleiotropic loci (Excalibur_c48047_90, Tdurum_contig100702_265 and BobWhite_c19429_95) for grain yield per plant (GYP), GPC and GLC were identified on chromosomes 3A, 4A and 7B, respectively. The pleiotropic loci (BS00063551_51 and RAC875_c28721_290) for GPC and GLC on chromosome 1B and 3A, respectively, were found under both conditions. Besides the validation of previously reported MTAs, some new MTAs were identified for flag leaf area (FLA), thousand grain weight (TGW), GYP, GPC and GLC under normal and water-deficit conditions. Twenty SNPs associated with the traits were mapped in the coding DNA sequence (CDS) of the respective candidate genes. The protein functions of the identified candidate genes were predicted and discussed. Isolation and characterization of the candidate genes, wherein, SNPs were mapped in CDS will result in discovering novel genes underpinning water-deficit tolerance in bread wheat.

Background: Salinity is among the most damaging abiotic stresses for rice production which limits its growing area. The present research was conducted to evaluate five rice varieties for salinity tolerance at seedling stage. Methods: Experiment was conducted in triplicate and in two sets. One set was grown as a control (non-stress) and other as salt stressed. Salt stress of 15 dS/m was applied to one set of rice seedlings under controlled conditions. Data for different growth related morpho-physiological traits, i.e. germination percentage, root and shoot length, seedling fresh and dry weight, Na+ and K+ uptake were recorded after 15 days of seedling emergence under control as well as salinity condition. Results: Significant differences were observed among the genotypes under both the treatments and interaction of the evaluated traits suggested a significant variability among the rice genotypes under salt stress. NIAB-IRRI-9, Basmati-198 and KSK-133 were proved to be relatively salt tolerant varieties as they showed good performance for the recorded parameters. However, Basmati-385 was observed a salt sensitive variety due to highest reduction in seedling fresh and dry weight along with the maximum Na+ uptake. Conclusion: Based on obtained results, it was concluded that the evaluated morpho-physiological traits were useful to screen rice cultivars for salinity stress. In addition, NIAB-IRRI-9, Basmati-198 and KSK-133 can be used in breeding programs as tolerant check and Basmati-385 can be used as sensitive check.

Nutritional therapy, for example through beer, is the best solution to human chronic diseases. In this article, we demonstrate the physiological mechanisms of the functional ingredients in beer with health-promoting effects, based on the PubMed, Google, CNKI, and ISI Web of Science databases, published from 1997 to 2024. Beer, a complex of barley malt and hops, is rich in functional ingredients. The health effects of beer against 26 chronic diseases are highly similar to those of barley due to the physiological mechanisms of polyphenols (phenolic acids, flavonoids), melatonin, minerals, bitter acids, vitamins, and peptides. Functional beer with low purine and high active ingredients made from pure barley malt, as well as an additional functional food, represents an important development direction, specifically, ginger beer, ginseng beer, and coix-lily beer, as consumed by our ancestors ca. 9000 years ago. Low-purine beer can be produced via enzymatic and biological degradation and adsorption of purines, as well as dandelion addition. Therefore, this review paper not only reveals the physiological mechanisms of beer in overcoming chronic human diseases, but also provides a scientific basis for the development of functional beer with health-promoting effects.