Search

Ultrasound (US) as a sustainable non-thermal sterilization technology that is employed either independently alone or in combination with other processing methods to eliminate food-borne pathogens in the food industry. In the present study, the synergistic effects of US combined with FeSO4 against Vibrio parahaemolyticus were investigated. The results demonstrated that the combination of ultrasound and FeSO4 had an excellent bactericidal activity on V. parahaemolyticus. Treatment with US (100 W) and FeSO4 (8 μM) for 15 min could kill more than 99.9 % cells. Furthermore, the observed cell death was identified as classical ferroptosis, characterized by ferroptosis hallmarks including iron-dependent, ROS burst, membrane damage and lipid peroxide accumulation. Addition of ferroptosis inhibitor liproxstatin-1 alleviated the cell death induced by the combination treatment. Transcriptome analysis further revealed that the US-FeSO4 treatment significantly influenced pathways related to fatty acid metabolism, ferroptosis, biofilm formation, RNA degradation, oxidative phosphorylation and other key processes, which likely contributed to the occurrence of ferroptosis. Based on these findings, we speculated that cavitation effect of US promoted the entry of Fe2+, leading to the generation of free radicals primarily responsible for ferroptosis by US-FeSO4. Taken together, this study provides valuable insights into the biological pathway involved in ultrasound sterilization and presents an alternative strategy to eradicate microorganism in food products.

Edible fungi were rich in nutrients and were potential sources of high-quality protein. In this study, nutritional components such as moisture, ash, protein, total sugar and L-ergothione in 18 kinds of edible fungi were analyzed, and headspace solid phase microextraction combined with gas chromatography-mass spectrometry (HS-SPME-GC-MS) were used to analyze the fruit-body, mycelium and fermentation broth of 6 edible fungi (Lentinula edodes, Agaricus bisporus, Coprinus comatus, Pleurotus eryngii, Auricularia heimuer and Ganoderma lucidum). The results showed that the water content of 18 edible fungi ranged from 6.7 to 13.77 g/100 g, ash content from 2.24 to 10.9 g/100 g, fat content from 0.3 to 2.92 g/100 g and total sugar content from 2.11 to 10.5 g/100 g. The crude protein content of 18 edible fungi ranged from 7.88 to 35.87 g/100 g, among which the protein content of Agaricus bisporus was as high as 35.87 g/100 g. There was no significant difference in the content of other nutrients. The amino acids were rich and contained 8 kinds of essential amino acids necessary for human body. Principal component analysis showed that the amino acid composition ratio of Lentinula edodes, Auricularia heimuer, Grifola frondosa, Volvariella volvacea, and Flammulina velutipes was most similar to that of egg, but significantly different from that of meat, soybeans and wheat. The results of high performance liquid chromatography showed that Lentinula edodes was rich in ergothioneine, and the content was up to 336 mg/kg. The ergothioneine content of edible fungi such as Grifola frondosa, Morchella, Agaricus bisporus and Coprinus comatus were also higher than 100 mg/kg. A total of 34 volatile compounds, including aldehydes, ketones, esters, alcohols, phenols, ethers, alkanes and heterocyclic compounds, were identified by HS-SPME-GC-MS in 6 edible fungi. Ganoderma lucidum mycelium was rich in hexal, methylnonylketone, trans-2-octenal, 2-n-amylfuran, 2,4-nononadienal and other volatile compounds, which were significantly different from the other 17 samples. The flavor substances of the fermentation broth of the six edible fungi were similar, and all of them had special flavor substances such as ethyl heptanate and 18-crown-6. Pleurotus eryngii mycelium and the fruiting bodies of Ganoderma lucidum and Coprinus comatus contained butylated hydroxytoluene, methyl benzoate and other unique substances. This study provides data basis for the development of high value edible fungi by analyzing the nutritional components and flavor substances of common edible fungi.

The white Hypsizygus marmoreu has good flavor and nutrition, and is rich in protein. To fully develop the white Hypsizygus marmoreu protein resources, protein was extracted by traditional alkali method and ultrasonic assisted method. The protein’s physicochemical properties such as oil absorption, water holding, solubility, foamability, emulsification were analyzed. The results showed that ultrasound-assisted extraction increased the extraction rate of protein to 31.4%, which was 8% higher than the traditional alkaline method. Thermal experiments showed that the maximum weight loss rate of protein extracted by ultrasound was 311.4 ℃, and that of protein extracted by traditional alkali was 334.8 ℃. Fourier transform infrared analysis showed that the α-spiral structure decreased while the irregular curly structure increased for the protein extracted by traditional alkali method. Compared with the soybean protein isolate (SPI), at non neutral pH or the salt ion concentration of 0.5 mol/L, there was no significant difference for the emulsifying ability and stability between white Hypsizygus marmoreu protein and SPI. At the same pH, there was no significant difference in water retention and emulsification stability between the two extraction processes. At the same NaCl concentration, no significant difference was observed between the solubility, foam stability and emulsification stability. Within 25~65 ℃, the oil absorption and foaming stability of white Hypsizygus marmoreu protein showed no significant difference between that of SPI. In this range, the solubility and foamability of white Hypsizygus marmoreu protein increased firstly and then decreased with the change of temperature.

Postharvest rot is an urgent problem affecting the storage of winter jujube. Therefore, the development of new technologies for efficient and safe preservation is very important. This study aimed to elucidate the fungal microbiota found on the epidermis of jujube during the storage period using high-throughput sequencing, as well as to monitor the changes in quality indexes throughout this period. Through internal transcribed spacer (ITS) sequencing, we identified two phyla (Basidiomycota and Ascomycota) and six genera (Cryptococcus, Bulleromyces, Sporidiobolus, Alternaria, Pseudozyma, and Sporobolomyces), which potentially contribute to the spoilage and deterioration of jujube, referred to as “core fungal taxa”. A high correlation was further found between preservation indices (including decay rate, firmness, and total soluble solids) and the growth of multiple core fungi over time. These findings will provide insights and a theoretical basis for further research on preservation techniques related to biological control during date fruit storage.

Pickering emulsion gel (PEG) stabilized by the protein extracted from the by-product of Hypsizygus marmoreus, combining with xanthan gum (XG), was formulated as 3D printing ink. Hydrogen bonds are formed in XG/protein hybrid particles. Afterwards, PEG was developed. Results indicated that it has shear-thinning properties. The apparent viscosity, yield stress, Elastic modulus (G') and gel strength increased with the increased XG addition, while the size of emulsion decreased. XG incorporation improved the 3D printing performance with desired self-supporting capability and printing precision if its concentration reached 2.0% (w/v). This study provides ideas for the application of Hypsizygus marmoreus by-products protein in stabilizing PEG used for 3D printing, which has a potential to replace traditional hydrogenated cream for cake decoration.

Vibrio parahaemolyticus is a typical marine bacterium, which often contaminates seafood and poses a health risk to consumers. Some non-thermal sterilization technologies, such as ultrasonic field (UF) and blue light (BL) irradiation, have been widely used in clinical practice due to their efficiency, safety, and avoidance of drug resistance, but their application in food preservation has not been extensively studied. This study aims to investigate the effect of BL on V. parahaemolyticus in culture media and in ready-to-eat fresh salmon, and to evaluate the killing effectiveness of the UF combined with BL treatment on V. parahaemolyticus. The results showed that BL irradiation at 216 J/cm2 was effective in causing cell death (close to 100%), cell shrinkage and reactive oxygen species (ROS) burst in V. parahaemolyticus. Application of imidazole (IMZ), an inhibitor of ROS generation, attenuated the cell death induced by BL, indicating that ROS were involved in the bactericidal effects of BL on V. parahaemolyticus. Furthermore, UF for 15 min enhanced the bactericidal effect of BL at 216 J/cm2 on V. parahaemolyticus, with the bactericidal rate of 98.81%. In addition, BL sterilization did not affect the color and quality of salmon, and the additive UF treatment for 15 min did not significant impact on the color of salmon. These results suggest that BL or UF combined with BL treatment has potential for salmon preservation, however, it is crucial to strictly control the intensity of BL and the duration of UF treatment to prevent reducing the freshness and brightness of salmon.

Ready-to-eat kiwifruit has gained significant market value in recent years due to its convenience and the increasing consumer demand for healthy ready-to-eat snacks. The volatile compound content (VOC) in ready-to-eat kiwifruit is a crucial factor determining its flavor and aroma. VOC is an important characteristic that positively affects the overall evaluation of ready-to-eat kiwifruit. In this study, we utilized gas chromatography-ion mobility spectrometry (GC-IMS) to investigate changes in the composition of VOCs in ready-to-eat kiwifruit during different storage periods (every 12 h). Our results revealed the presence of 55 VOCs in ready-to-eat kiwifruit, with alcohols, esters, and ketones being the dominant compounds responsible for the aromatic flavor. Among these compounds, methyl caproate, ethyl butyrate, and ethyl propionate provided specific fruit flavors to ready-to-eat kiwifruit, whereas esters played a secondary role. Furthermore, varying trends were observed for different compound types as the storage period increased: alcohols exhibited a decreasing trend, whereas ester products and some sulfur-containing compounds showed an increase. Additionally, fingerprint profiles of volatile compounds were established for each storage period, enabling the identification of characteristic substances. This comprehensive analysis of volatile flavor substances during the ripening of ready-to-eat kiwifruit will greatly contribute to enhancing its sensory quality, consumer appeal, and overall marketability.

In order to improve yak bone utilization rate and realize high-value utilization, the lipid composition and physicochemical parameters of yak bone were determined and analyzed by GC-MS and IUPAC method. A total of 20 fatty acids were detected by lipidomic analysis, of which SFA (Saturated fatty acid) content accounted for 41.75%, FA n:1 (Monounsaturated fatty acid) 53.01%, PUFA (Polyunsaturated fatty acid) 1.46%, and others 3.79%. A total of four lipids were detected in negative ion mode: Car (Acetyl L-Carnitine), SM (Sphingomyelines), PC (Phosphatidylcholines) and TAG (Triacylglycerols), and the contents were PC>SM>TAG>Car in order. The results of physical and chemical indexes showed that the fat of yak leg bone had better stability and more saturated fatty acids. Two substances, α-trienol and γ-trienol, were detected in yak leg bones. The oxidation stability of oil showed that the induction time of yak bone oil was 5.56 h, the oxidation stability of yak bone oil was high, and it had strong anti-oxidation effect. Fatty acids are closely related to bone health. Yak bone is rich in fatty acids. Therefore, yak bone can be used as a potential nutrient to maintain bone health.

Numerous counterfeit vintage Baijiu are widely distributed in the market driven by economic interest which disturb the market economic rules and damage the reputation of particular Baijiu brand. Found on the situation, the Baijiu system variation during aging period, aging mechanisms and discrimination strategies for vintage Baijiu are systematically illuminated. The aging mechanisms of Baijiu cover volatilization, oxidation, association, esterification, hydrolysis, formation of colloid molecules and catalysis by metal elements or other raw materials dissolved from storage vessels. The discrimination of aged Baijiu has been performed by electrochemical method, colorimetric sensor array or component characterization coupled with multivariate analysis. Nevertheless, the characterization of non-volatile compounds in aged Baijiu is deficient. Further research on the aging principles, more easy-operation and low-cost discrimination strategies for aged Baijiu are imperative. The above information is favorable to better understand the aging process and mechanisms of Baijiu, and promote the development of artificial aging techniques.

Lipids are crucial components for the maintenance oof normal structure and function in the nervous system. Elucidating the diversity of lipids in spinal cords may contribute to our understanding of neurodevelopment. This study comprehensively analyzed the fatty acid (FA) compositions and lipidomes of the spinal cords of eight domesticated animal species: pig, cattle, yak, goat, horse, donkey, camel, and sika deer. Gas chromatography–mass spectrometry (GC-MS) analysis revealed that saturated fatty acids (SFAs) and monounsaturated fatty acids (MUFAs) were the primary FAs in the spinal cords of these domesticated animals, accounting for 72.54–94.23% of total FAs. Notably, oleic acid, stearic acid and palmitic acid emerged as the most abundant FA species. Moreover, untargeted lipidomics by UPLC-Q-Exactive Orbitrap-MS demonstrated that five lipid classes, including glycerophospholipids (GPs), sphingolipids (SPs), glycerolipids (GLs), FAs and saccharolipids (SLs), were identified in the investigated spinal cords, with phosphatidylcholine (PC) being the most abundant among all identified lipid classes. Furthermore, canonical correlation analysis showed that PC, PE, TAG, HexCer-NS and SM were significantly associated with genome sequence data. These informative data provide insight into the structure and function of mammalian nervous tissues and represent a novel contribution to lipidomics.

Aspergillus flavus (A. flavus) is a postharvest fungus, causing pitaya fruit decay and limiting pitaya value and shelf life. However, safer and more efficient methods for preventing A. flavus contamination for pitaya fruit remain to be investigated. In this study, we successfully proved exogenous Fe2+ could inhibit A. flavus colonization in pitaya fruit and extend pitaya’s shelf life after harvest. Moreover, gel electrophoresis, CD analysis and Raman spectrum tests revealed Fe2+ could more effectively and thoroughly promote conidial death by directly binding to A. flavus DNA. Increased expression of DNA damage repair-related genes after Fe2+ treatment was observed by transcription analysis, which might eventually lead to SOS response in A. flavus. These results indicated Fe2+ could prevent A. flavus infestation on pitaya in a novel, quickly responsive mechanism. Our results shed light on the potential application of Fe2+ in the food industry and provided a more universal antifungal agent against food pathogens.

Aflatoxin B1 (AFB1), as a class I carcinogen, poses a substantial health risk to individuals. Contamination of food sources, particularly grains and nuts, with Aspergillus flavus (A. flavus) contributes to the prevalence of AFB1. The impact of global warming has spurred research into the development of AFB1 prevention technologies. While edible fungi have shown potential in detoxifying AFB1, there is a scarcity of literature on the application of Auricularia auricular (A. auricular) in this context. This study aimed to investigate the ability and underlying mechanism of A. auricular mycelia to adsorb aflatoxin B1, as well as evaluate its protective effects on the AFB1-induced liver damage in SD rats. Additionally, the effects of temperature, time, pH, and reaction ratio on the adsorption rate were examined. Combining thermodynamic and kinetic data, the adsorption process was characterized as a complex mechanism primarily driven by chemical adsorption. In SD rats, the A. auricular mycelia exhibited alleviation of AFB1-induced liver damage. The protective effects on the liver attributed to A. auricular mycelia may involve a reduction in AFB1 adsorption in the intestine, mitigation of oxidative stress, and augmentation of second-phase detoxification enzyme activity. The adsorption method for AFB1 not only ensures safety and non-toxicity, but also represents a dietary regulation strategy for achieving effective defense against AFB1.

The increasing incidence of diseases caused by highly carcinogenic aflatoxin M1 (AFM1) in food demands a simple, fast, and cost-effective detection technique capable of sensitively monitoring AFM1. Recent works predominantly focus on the electrochemical aptamer-based biosensor, which still faces challenges and high costs in experimentally identifying an efficient candidate aptamer. However, the direct electrochemical detection of AFM1 has been scarcely reported thus far. In this study, we observed a significant influence on the electrochemical signals of ferric ions at a gold nanoparticle-modified glassy carbon electrode (AuNPs/GCE) by adding varying amounts of AFM1. Utilizing ferricyanide as a sensitive indicator of AFM1, we have introduced a novel approach for detecting AFM1, achieving an unprecedentedly low detection limit of 1.6 × 10−21 g/L. Through monitoring the fluorescence quenching of AFM1 with Fe3+ addition, the interaction between them has been identified at a ratio of 1:936. Transient fluorescence analysis reveals that the fluorescence quenching process is predominantly static. It is interesting that the application of iron chelator diethylenetriaminepentaacetic acid (DTPA) cannot prevent the interaction between AFM1 and Fe3+. With a particle size distribution analysis, it is suggested that a combination of AFM1 and Fe3+ occurs and forms a polymer-like aggregate. Nonetheless, the mutual reaction mechanism between AFM1 and Fe3+ remains unexplained and urgently necessitates unveiling. Finally, the developed sensor is successfully applied for the AFM1 test in real samples, fully meeting the detection requirements for milk.

Spicy wheat flour gluten sticks are delicious and affordable puffed snacks for young adults and even minors in China, and have a relatively simple nutritional quality. L. edodes powder (LEP) is rich in nutrients and boasts a variety of biological activities. This study evaluated the effects of different concentrations of LEP addition on the quality of wheat flour gluten sticks. The gelatinization results of the products showed that the peak viscosity decreased from 454 cP to 251 cP; the breakdown value decreased from 169 cP to 96 cP; and the setback value decreased from 381 cP to 211 cP. With the increase in LEP, the radial expansion rate (RER) of L. edodes gluten sticks (LSGS) first increased and then decreased, reaching a maximum value of 1.388 in the 10% LEP group. The oil absorption rate (OAR) of LSGS increased from 5.124% to 14.852% with the increase in the amount of LEP. Additionally, texture profile analysis showed that the hardness value increased from 1148.898 to 2055.492 g; the chewiness value increased from 1010.393 to 1499.233; and the springiness value decreased from 1.055 to 0.612. Through X-ray diffraction (XRD), it was found that the crystal type was transformed from A-type crystal to B-type and V-type crystals. Low field nuclear magnetic resonance (LF-NMR) results showed that the moisture distribution in the products was basically bound water. The scanning electron microscopy (SEM) results showed that, with the increase in the LEP amount, the surface of the products changed from rough to smooth. Sensory evaluation results indicated that the products with 10% LEP helped to maintain better taste and quality of LSGS, with an average score of 7.628, which was the most popular among consumers. This study not only increases the possible raw materials for use in extruded puffed food, but also provides a new possibility for the production of high-quality edible fungi extruded products.

Thymol is a plant-derived natural compound with antimicrobial activity. However, we have little knowledge about the application of thymol in agriculture. One of the limitations is the high volatility and low aqueous solubility of thymol. Tomato gray mold caused by Botrytis cinerea is one of the most devastating postharvest diseases. In this study, we prepared a nano-emulsion of thymol (named as Nano-Thy) to form a stable O/W (oil in water) microemulsion. In vitro experiments showed that Nano-Thy had antifungal activity against B. cinerea by inhibiting mycelial growth and spore germination. Nano-Thy induced ROS accumulation in mycelia, further leading to lipid peroxidation, cell membrane damage, and subsequent cell death. Nano-Thy significantly prevented the infection of B. cinerea on fresh tomato fruits. Finally, we discussed the mechanisms and their significance in controlling postharvest disease of fruit crops.

Benzyl isothiocyanate (BITC) is widely utilized in multiple biomedical fields, due to its significant antibacterial properties and low toxicity. However, poor water solubility and pungent odor has limited its application in the food industry. In this study, we first prepared inclusion complexes of BITC in GLU-β-CD and HP-β-CD using ultrasound, which is able to overcome the hindrance of poor water solubility and high volatility. Then, the BITC-β-CD inclusion complexes were characterized by using high-performance liquid chromatography (HPLC), nuclear magnetic resonance hydrogen spectra (1H-NMR), infrared absorption spectra (IR), and differential scanning calorimetry (DSC) to confirm their stability. Further, the evaluation of antibacterial and antitumor effects of the BITC-β-CD inclusion complexes showed that they had great bactericidal activity against both Escherichia coli and Staphylococcus aureus cells, and also inhibited the growth of HepG2 cells in vitro. In addition, our results indicated that BITC-β-CD complexes were able to inhibit the growth of S. aureus in broccoli juice and extend the shelf life of broccoli juice, demonstrating the potential of β-cyclodextrin to improve the stability and controlled release of BITC. Taken together, our results show that BITC-β-CD complexes have good potential for application in the food industry.

The objective of the current study was to evaluate the feasibility of papery food with Pleurotus eryngii (P. eryngii) as a raw material using the papermaking process. The physical, chemical, structural, and thermal degradation properties were studied as well as the sensory evaluation of the papery food from P. eryngii mycelia (PMP), stems (PSP), caps (PCP), and whole fruiting bodies (PEP). The results indicated that the colors from PSP, PCP, and PEP were clearly different from PMP. Thicker PSP and PMP had a smoother surface and better crispness compared to PCP. Moreover, PSP had better moisture resistance and thermal decomposition performance compared to the other groups. Nutritional composition and Fourier-transform infrared spectroscopy suggested abundant polysaccharide and protein content in all of the papery food. Finally, sensory evaluation showed that the formability, mouth feel, and overall palatability of PSP and PMP were more popular among consumers. Overall, this study provides a novel method for the preparation of papery food and provides a potential new mechanism for the further development and utilization of the fruiting bodies and mycelium of P. eryngii.

Most fermented foods need a natural aging process to enrich desired flavours. This process is normally the bottleneck for cost-effective production. Therefore, it is desirable to accelerate the process and obtain products with the same flavour profile. Here, we used physical interventions (ultrasonic field, alternating magnetic field, or combination of both) to assist the aging process with naturally brewed vinegar as a case example. Flavour profiles of different physical-assisted aging process were compared with that of the naturally aged vinegar by using gas-chromatography mass-spectrometry (GC–MS) and electronic nose. Principal component analysis (PCA) and Pearson correlation analyses show that ultrasonic and alternating magnetic fields treatment could accelerate the aging process of vinegar. The highest accelerating aging effect was combination of ultrasonic and magnetic field followed by individual ultrasonic or magnetic field and natural process (combination of ultrasonic and magnetic field > ultrasonic or magnetic field individual > natural process). These results suggest that physical field intervention could potentially be used for acceleration of aging of fermented products without affecting flavour quality.

In recent years, plant protein hydrolysates have gained increased attention due to their superior antioxidant activity and potential to prevent several chronic diseases associated with oxidative stress. This study aimed to investigate the antioxidant activity, functional properties, and cytoprotective effects of the tree peony seed protein hydrolysate (TPSPH) with different molecular weights (MWs). The antioxidant activities were evaluated by DPPH, hydroxyl radicals scavenging, Fe2+ chelating, and inhibition of the β-carotene oxidation abilities. The protective effects and mechanism against oxidative stress were determined using H2O2-stressed HepG2 cells. MW > 30 kDa of TPSPH showed the highest radical scavenging (DPPH IC50 = 0.04, hydroxyl IC50 = 0.89 mg/mL) and inhibition of β-carotene oxidation (80.07% at 2.0 mg/mL) activity. Moreover, MW > 30 kDa possessed high hydrophobicity, emulsifying capacity, and abundant antioxidant amino acids (28.22% of hydrophobic amino acids and 8.3% of aromatic amino acids). MW 5–10 kDa exhibited more effective protection against H2O2-induced HepG2 cells, by reducing reactive oxygen species (ROS), malonaldehyde (MDA), lactate dehydrogenase (LDH), and activating antioxidant enzymes (superoxide dismutase and catalase). These results indicated the potential application of TPSPH as an antioxidant in food and functional foods.

As a vitamin C–rich fruit, choosing the eating time for kiwifruit with the best quality during the shelf period is still a problem for consumers. This paper mainly focuses on the correlation between cold storage time, quality indexes, volatile flavor compounds of postharvest kiwifruit and RGB value readouts from photos taken by mobile phone. Results indicated that the R to B ratio values (Central R/B) and B to G ratio values (Central B/G) of the central site of kiwifruit were strongly associated with storage time and all quality indicators. The central R/B was negatively correlated with titratable acidity, vitamin C and 2,6-Nonadienal contents and firmness and positively correlated with storage time, weight loss, soluble solids content, total soluble sugars, total plate counts and 1,3-Cyclooctadiene. We provide a novel and smart strategy to predict the shelf life and quality parameters of kiwifruit by capturing and calculating RGB values using a smartphone.

Edible fungi play an important role in material and energy cycling. This study explored the role of Pleurotus eryngii mycelia in the transformation of potato high-calorie starch to low-calorie β-glucan. First, the 3D printing performance of the potato medium was optimized. After inoculating the fermentation broth of Pleurotus eryngii in 3D printing, we studied the microstructure and material composition of the product. Along with the increase in 3D printing filling ratio, the starch content of the culture product decreased from 84.18% to 60.35%, while the starch content in the solid medium prepared using the mold was 67.74%. The change in β-glucan content in cultured products was opposite to that of starch, and the content of the culture product increased from 12.57% to 24.31%, while the β-glucan content in the solid medium prepared using the mold was 22.17%. The amino acid composition and content of the 3D printing culture system and solid culture products prepared using the mold were similar. The 3D printing culture system promoted the bioconversion efficiency of mycelia. It also showed high application potential of Pleurotus eryngii mycelia for the preparation of low-calorie food.

Currently, technologies that allow to preserve the native properties of raw materials in the finished product as much as possible thanks to the soft modes of technological processes deserve special attention. An important condition for obtaining healthy food products is the availability of a raw material base and technical means of extracting aquatic biological resources. The article shows that in China, a healthy lifestyle and the consumption of healthy food products are gaining popularity. China is a country that demonstrates absolute dominance in the production of shellfish, both aquaculture and in squid fishing. Despite this, there is a shortage of healthy food products in the domestic food market in China due to the uneven distribution of aquatic bioresources. The main type of processed shellfish are squids, which are traditionally very popular in China. In addition to frozen processed squid and other primary processed products, the main products from squid are minced squid, sliced squid and chopped squid, as well as various types of canned food. The article shows the high nutritional and biological value of squid, which is provided by high-grade proteins and essential polyunsaturated fatty acids. But when processing squids, a number of problems arise associated with the deterioration of organoleptic properties and a decrease in the biological value of the finished product. This article is a review and reveals a number of issues related to the features of the fractional composition of muscle tissue proteins of various raw materials. Also analyzed the changes in the physico-chemical parameters of proteins in a wide range of temperature effects. The article presents a promising type of technological processing, which allows to eliminate certain disadvantages of traditional technologies such as hard, dry consistency, weight loss of the finished product, as well as the loss of valuable extractive substances that provide organoleptic properties of food products. Such technologies with minimal impact on the technological properties of the finished product include SousVide technology. SousVide is a technology of low-temperature preparation of food products in a vacuum, which allows reliable monitoring of sensory performance and microbiological safety of products with strict observance of technological regulations.

With the speeding tendency of aging society, the population experienced dysphagia is increasing quickly. Desirable dysphagic diets should be safe, visually appealing and nutritious. 3D printing allows for creation of personalized nutritious foods with regular-like appearance. Shiitake mushroom, rich in protein and bioactive compounds, is suitable for elderly, but its hard texture was not friendly to the elderly with dysphagia. This study investigated the feasibility of production of dysphagic product using shiitake mushroom by 3D printing with various gums addition, including arabic gum (AG), xanthan gum (XG) and k-carrageenan gum (KG) at concentrations of 0.3%, 0.6% and 0.9% (w/w). Data suggested that XG and KG incorporation significantly increased inks’ mechanical strength by decreasing water mobility and promoting the formation of hydrogen bond, enabling 3D printed objects with great self-supporting capacity. The XG containing and KG-0.3% samples were categorized into level 5—minced and moist dysphagia diet within international dysphagia diet standardization initiative (IDDSI) framework. AG addition decreased mechanical strength and viscosity, hardness and self-supporting capacity of 3D printed constructions. AG-0.3% and AG-0.6% samples could not be classified as dysphagia diets based on IDDSI tests. This study provides useful information for dysphagia diet development with appealing appearance by 3D printing.

Aflatoxin biosynthesis has established a connection with oxidative stress, suggesting a prevention strategy for aflatoxin contamination via reactive oxygen species (ROS) removal. Epigallocatechin gallate (EGCG) is one of the most active and the richest molecules in green tea with well-known antioxidant effects. Here, we found EGCG could inhibit aflatoxin B1 (AFB1) biosynthesis without affecting mycelial growth in Aspergillus flavus, and the arrest occurred before the synthesis of toxin intermediate metabolites. Further RNA-seq analysis indicated that multiple genes involved in AFB1 biosynthesis were down-regulated. In addition, EGCG exposure facilitated the significantly decreased expression of AtfA which is a bZIP (basic leucine zipper) transcription factor mediating oxidative stress. Notably, KEGG (Kyoto Encyclopedia of Genes and Genomes) analysis indicated that the MAPK signaling pathway target transcription factor was down-regulated by 1 mg/mL EGCG. Further Western blot analysis showed 1 mg/mL EGCG could decrease the levels of phosphorylated SakA in both the cytoplasm and nucleus. Taken together, these data evidently supported that EGCG inhibited AFB1 biosynthesis and alleviated oxidative stress via MAPK signaling pathway. Finally, we evaluated AFB1 contamination in soy sauce fermentation and found that EGCG could completely control AFB1 contamination at 8 mg/mL. Conclusively, our results supported the potential use of EGCG as a natural agent to prevent AFB1 contamination in fermentation industry.

Anthocyanins are natural pigments that exhibit a wide range of protective effects with potential benefits for human health related to their antioxidant activities. Grape berries are rich anthocyanins, and these compounds have considerable influence on wine quality. However, these pigments are known to only be present in coloured grape berries. In the present study, we investigated three distinctive grapes, in which only a few reports of mutant strains on the skin colour of the grape berry were reported. Anthocyanin and non-anthocyanin phenolic profiles of grape berry skin, pulp, and seeds at different growth stages were analysed using high performance liquid chromatography of flight mass spectrometry (HPLC-ESI-MS/MS). Meanwhile, grape antioxidant properties were evaluated at growth stages, including the early stage, veraison, and mature stage. The results showed that some anthocyanins contents, such as malvidin 3-O-glucoside, are significantly different between white skin grapes and their corresponding coloured genotypes, with high content in coloured but not in white skin grapes. However, other anthocyanins, such as delphinidin 3-O-glucoside, showed no significant differences between white skin grapes and their corresponding coloured genotypes. Moreover, non-anthocyanin phenolic profiles and antioxidant properties, except cultivars Pinot Blanc and Pinot Noir, showed no significant differences between white skin grapes and their corresponding coloured genotypes at any growth stage, including the pulp and seeds. However, significant differences were noted between different cultivars, for example, white-ciputao and Pinot Noir, Pinot Blanc and Muscat Rouge, and coloured-ciputao and Muscat Blanc, showing that the antioxidant capacity was not always in correlation with skin colour of grape berries.

Leaves of Adinandra nitida, traditionally brewed as a health tea beverage in China, were treated with instant catapult steam explosion (ICSE) under various steam pressures (0.5–3.0 MPa) and residence times (30–120 s). The effects of ICSE on the flavonoids of the leaves and their cellular antioxidant and anti-proliferative activities and cytotoxicity against HepG2 cells were investigated. HPLC analysis showed that the treatment caused decreases and eventual disappearance of camellianin A and B with consequent formation of apigenin, which was attributed to discrepancy in the thermal stability of these flavonoids. The conversion of camellianin A and B to apigenin resulted in significant increases in the cellular antioxidant and anti-proliferative activities of Adinandra nitida leaves, with the EC50 values reduced by 53.7 and 68.1%, respectively. The study shows that ICSE could be an efficient, economical and environment-friendly method for modifying the polyphenolic composition and improve the bioactivities of Adinandra nitida leaves.

Cinnamaldehyde (CA) is marginally soluble in water, making it challenging to evenly disperse it in foods, and resulting in lowered anti-A. flavus efficacy. In the present study, nano-dispersed CA (nano-CA) was prepared to increase its aqueous solubility. Free and nano-dispersed CA were compared in terms of their inhibitory activity against fungal growth and aflatoxin production of A. flavus both in Sabouraud Dextrose (SD) culture and in peanut butter. Our results indicated that free CA inhibited the mycelia growth and aflatoxin production of A. flavus with a minimal inhibitory concentration (MIC) value of 1.0 mM, but promoted the aflatoxin production at some concentrations lower than the MIC. Nano-CA had a lower MIC value of 0.8 mM against A. flavus, and also showed improved activity against aflatoxin production without the promotion at lower dose. The solidity of peanut butter had an adverse impact on the antifungal activity of free CA, whereas nano-dispersed CA showed more than 2-fold improved activity against the growth of A. flavus. Free CA still promoted AFB1 production at the concentration of 0.25 mM, whereas nano-CA showed more efficient inhibition of AFB1 production in the butter.

Persisters are tolerant to multiple antibiotics, and widely distributed in bacteria, fungi, parasites, and even cancerous human cell populations, leading to recurrent infections and relapse after therapy. In this study, we investigated the potential of cinnamaldehyde and its derivatives to eradicate persisters in Escherichia coli. The results showed that 200 μg/ml of alpha-bromocinnamaldehyde (Br-CA) was capable of killing all E. coli cells during the exponential phase. Considering the heterogeneous nature of persisters, multiple types of persisters were induced and exposed to Br-CA. Our results indicated that no cells in the ppGpp-overproducing strain or TisB-overexpressing strain survived the treatment of Br-CA although considerable amounts of persisters to ampicillin (Amp) and ciprofloxacin (Cip) were induced. Chemical induction by carbonyl cyanide m-chlorophenylhydrazone (CCCP) led to the formation of more than 10% persister to Amp and Cip in the entire population, and Br-CA still completely eradicated them. In addition, the cells in the stationary phase, which are usually highly recalcitrant to antibiotics treatment, were also completely eradicated by 400 μg/ml of Br-CA. Further studies showed that neither thiourea (hydroxyl-radical scavenger) nor DPTA (Fe3+ chelator to block the hydroxyl-radical) affected the bactericidal efficiency of the Br-CA to kill E. coli, indicating a ROS-independent bactericidal mechanism. Taken together, we concluded that Br-CA compound has a novel bactericidal mechanism and the potential to mitigate antibiotics resistance crisis.

The chemical properties of β-glucans leading to their inhibition on aflatoxin (AF) production by Aspergillus flavus remain unclear. In this study, structurally modified lentinan derivatives were prepared by carboxymethylation, sulfation, and phosphorylation to explore their inhibition activity to AF synthesis. The results demonstrated that inhibitory activity of lentinan decreased at higher or lower concentrations than 200 μg/mL. Compared with lentinan, the sulphated derivatives only performed a reduced optimal inhibition rate at a higher concentration. The phosphorylated derivatives achieved complete inhibition of AF production at 50 μg/mL, but the inhibitory activity was attenuated with an increase of concentration. The minimum concentration of carboxymethylated derivatives to completely inhibit AF synthesis was the same as that of the original lentinan, whereas their inhibition activity was not reduced at the increasing concentration. RT-PCR analyses were conducted to understand the effects of lentinan and its carboxymethylated derivatives on the transcription of certain genes associated with AF biosynthesis. The results showed that lentinan delayed the transcription of aflQ, whereas its carboxymethylated derivatives promoted the transcriptions of all the tested genes. Our results revealed that some chemical group features apart from the β-bond could play the vital role in the prevention of AF formation by polysaccharide, and highlighted the structural modifications which could promote its practicability in the control of aflatoxin contamination.

Aspergillus flavus is a well-known pathogenic fungus for both crops and human beings. The acquisition of resistance to azoles by A. flavus is leading to more failures occurring in the prevention of infection by A. flavus. In this study, we found that thymol, one of the major chemical constituents of the essential oil of Monarda punctate, had efficient fungicidal activity against A. flavus and led to sporular lysis. Further studies indicated that thymol treatment induced the generation of both ROS and NO in spores, whereas NO accumulation was far later than ROS accumulation in response to thymol. By blocking ROS production with the inhibitors of NADPH oxidase, NO generation was also significantly inhibited in the presence of thymol, which indicated that ROS induced NO generation in A. flavus in response to thymol treatment. Moreover, the removal of either ROS or NO attenuated lysis and death of spores exposed to thymol. The addition of SNP (exogenous NO donor) eliminated the protective effects of the inhibitors of NADPH oxidase on thymol-induced lysis and death of spores. Taken together, it could be concluded that ROS is involved in spore death induced by thymol via the induction of NO.