Search

Niger State (Nigeria) was selected as a case study of renewable, affordable and user friendly clean energy provision in remote areas of developing countries. Niger state has 80% of its 4.5 million population living in rural agrarian areas with low literacy rates, there is a lack of wind thus eliminating wind as widely available potential power source. Based on the assessment of the local large insolation, the type of agricultural, biomass and husbandry resources, this study selected the design of anaerobic digestion units processing mostly animal and human waste, and whose heating and power requirement would be entirely provided by solar photovoltaic/thermal to maintain optimum efficiency of the biogas production. The designs was carried out at the scale of up to 15 household demand (community scale). Volume and therefore the production of biogas maybe increased or decreased in the design considered, and local, low cost resilient material were proposed. The proposed system was costed for a community of 24 people, demonstrating the potential for clean and renewable gas production economically.

Water scarcity is a global challenge, underscoring the importance of efficient water resource management. Solar stills offer a cost-effective method to convert brackish water into potable water but face productivity limitations. This study aims to enhance solar still productivity through modifications using different fin materials and water depth. Computational Fluid Dynamics (CFD) simulations were employed to evaluate thermal performance across four scenarios: copper and aluminum fins at water depths of 20 mm and 40 mm. Key parameters including temperature distributions, friction volume, and fluid velocity were analyzed for each configuration (MSS-I to MSS-IV). Energy and exergy efficiencies were also assessed. MSS-III, utilizing copper fins at a 20 mm depth, demonstrated the highest daily productivity (8.33 liters) compared to MSS-IV (8.02 liters), MSS-I (7.81 liters), and MSS-II (6.71 liters). Energy efficiencies were highest for MSS-III (60.10%), followed by MSS-IV (57.41%), MSS-I (55.22%), and MSS-II (52.18%). MSS-III also exhibited the highest exergy efficiency (21.50%), with MSS-I (17.15%), MSS-IV (16.43%), and MSS-II (14.12%) following. The study underscores significant improvements in thermal and energy efficiency achieved through specific design modifications of solar stills. MSS-III's higher performance, attributed to the use of copper fins and optimized depth, highlights the critical role of material selection and structural design in enhancing solar still productivity. These findings have important implications for sustainable water resource management, emphasizing the potential of optimized solar still designs to address water scarcity challenges. [ABSTRACT FROM AUTHOR]

Solar PV has a disadvantage over its many advantages that its electrical efficiency falls due to rise in surface/operating temperature of solar PV cells. Therefore, it is necessary to find a way to mitigate the efficiency loss due to rise in temperature as well as to increase life span of solar photovoltaics by lowering its cell temperature. In this research, the impact of mist cooling on output of PV panel is observed through experimental setup installed at rooftop of Postgraduate Department, Mehran University of Engineering and Technology, Jamshoro, Pakistan. The rear surface of PV module is cooled with designed mist nozzle assembly. The performance of modified mist cooled PV module is than compared with reference PV module. Experimental investigation is performed several days in different weather conditions with natural circulation and with forced circulations by using submerged pump. The maximum efficiency gains of 7% and average gain of 3.72% is observed with natural circulation, and maximum gain of 9.2% and average gain 1.72% are observed with forced circulated mist. The overall impact of proposed mist cooled system is positive on performance of PV panels. [ABSTRACT FROM AUTHOR]

Pakistan has been facing energy crises for more than a decade as a result of its reliance on imported fossil fuels, circular debt, political instability, and absurd energy policies. However, the country has abundant renewable energy resources which, if harnessed, may help to effectively cope with ever-increasing energy demand. This review study investigates the country's economic and energy situations, energy crises, and energy sector performance. A critical analysis of studies conducted on Pakistan's energy planning since its independence in 1947 is, and policies announced to date are assessed. This review reveals that the economic situation of the country has remained severely stressed, and energy sector performance has been compromised over the years for various underlying reasons. The energy policy narrative in the early decades of the post-independence period focused on water resource management, whereas energy concerns were only realized in the late 1960s as demand grew. The first-ever energy and power planning study in Pakistan was conducted in 1967, and since then, various studies have been conducted to support the medium-term development plans of the government. These planning studies inspired further development, and in 1994, the first-ever electricity-focused power policy was announced by the government in response to industrial growth and subsequent electricity demand. However, this and subsequent policies were fossil-fuel-centric until 2006, when the government announced the first-ever renewable energy policy. This 2006 policy focused on increasing renewable energy penetration in the overall energy mix by setting specific targets. However, these targets have rarely been accomplished as a result of a lack of an effective planning paradigm, as most of studies have been conducted without sound demand forecasting and without considering renewable energy's potential to meet growing demand. As such, planning efforts based on proven methodologies/modeling tools and the undertaking of demand forecasts and renewable energy assessments are inevitable for countries such as Pakistan. Therefore, we suggest that sectoral energy demand forecasting, estimation of renewable energy potential with end use, and modeling of optimal penetration of renewable energy using energy modeling tools will be helpful to develop sustainable energy policies in Pakistan to eradicate the energy crisis. [ABSTRACT FROM AUTHOR]

Successful dyeing of lyocell, a biodegradable regenerated cellulose fiber, in fabric form is still a challenging job. Here in, we report successful dyeing of lyocell fabric with vat dyes by conventional batchwise method. To assess the dyeability of lyocell fabric, a woven lyocell fabric was dyed with three different colorants (Blue Yellow and Red) of vat dyes by using previously determined procedure for vat dyeing on cellulose fabric. Dyeing parameters (temperature and time) were regulated to attain optimal dyeing conditions. Color yield of dyed lyocell fabric was analyzed using Kubelka–Munk equation, and durability of dyed fabric was examined by standard colorfastness properties. Lyocell fabric dyed with vat dyes displayed excellent color strength and remarkable fastness properties under optimized dyeing conditions. SEM results revealed smooth surface morphology after dyeing. The dye effluent analysis showed that dyeing of lyocell fabric with vat dyes is eco-friendly. [ABSTRACT FROM AUTHOR]