Search

Organically modified layered silicates can be used as barrier pigments in organic coating systems to reduce the permeation of water vapor and gases, e.g., oxygen as well as harmful gases that promote corrosion. Unmodified layered silicates are not sufficient to reduce the permeation significantly. However, the arrangement and orientation of the particles have an enormous impact on the later performance in the barrier film. In organic solvents or non‐aqueous polymer matrices the non‐modified layered silicates cannot exfoliate adequately. The organic modification influences the layer spacing and the compatibility to organic solvents. Layered silicates are modified with dodecylamine to enhance the spacing layer. The spacing layer is enhanced by 55% caused by the organic modification as it is commonly known. In contrast to previous work freeze drying of the organically modified layered silicates improved the particle distribution and by this barrier properties significantly. The modified particles reduce the diffusion of water and oxygen by ≈99.6% and 97.2%, respectively. The corrosive gas test of electronic circuit boards shows no growth of dendrites and no failure of the electronics in contrast to protective coating without the layered silicates. [ABSTRACT FROM AUTHOR]

Pressure‐sensitive adhesive tapes are used in several industrial applications such as construction, railway vehicles and the automotive sector, where the burning behavior is of crucial importance. Flame retarded adhesive tapes are developed and provided, however, often without considering the interaction of adhesive tapes and the bonded materials during burning nor the contribution of the tapes to fire protection goal of the bonded components in distinct fire tests. This publication delivers an empirical comprehensive knowledge how adhesive tapes and their flame retardancy effect the burning behavior of bonded materials. With a special focus on the interaction between the single components, one flame retarded tape and one tape without flame retardant are examined in scenarios of emerging and developing fires, along with their bonds with the common materials wood, zinc‐plated steel, mineral wool, polycarbonate, and polymethylmethacrylate. The flame retardant significantly improved the flame retardancy of the tape as a free‐standing object and yielded a V‐2 rating in UL 94 vertical test and raised the Oxygen Index by 5 vol.%. In bonds, or rather laminates, the investigations prove that the choice of carrier and substrates are the factors with the greatest impact on the fire properties and can change the peak of heat release rate and the maximum average rate of heat emission up to 25%. This research yielded a good empirical overall understanding of the fire behavior of adhesive tapes and bonded materials. Thus, it serves as a guide for tape manufacturers and applicants to develop tapes and bonds more substrate specific. [ABSTRACT FROM AUTHOR]

Tetraphenylphosphonium modified layered silicate epoxy nanocomposite (EP/TPPMMT) combined with low-melting silicate glass, Ceepree (CP) is investigated by thermal analysis, flammability tests and cone calorimeter at different heat fluxes. Adding CP and TPPMMT does not change the pyrolysis apart from increasing inorganic residue. The total heat evolved (THE) is changed insignificantly, as neither relevant additional carbonaceous charring nor flame inhibition occurs. However, flame retardancy is clearly observed due to an inorganic-carbonaceous surface protection layer. The peak heat released rate (PHRR) is reduced by around 32-42% when 5 wt% TPPMMT is added, and 51-63% when 10 wt% CP is added. PHRR reduction less than expected is observed when both additives are combined- The reduction is greater than that achieved by using TPPMMT but less than when only CP is used. The morphology of fire residue is investigated by scanning electron microscope on different length scales and turns out to be the key to understanding the efficiency of flame retardancy. The fire residue of EP/CP shows a layered structure, whereas separated columns limit the barrier properties for EP/ 5%TPPMMT on the micrometer scale. Columns dominating the fire residue structure of EP/5%TPPMMT/ 10%CP deteriorate the fire retardancy, whereas a more integral structure at the top of the residue causes the improvement over EP/5%TPPMMT. POLYM. ENG. SCI., 52:507-517, 2012. ©2011 Society of Plastics Engineers, INTRODUCTION In the pursuit of eco-friendly and economical flame retardants for polymers, over the last decade and a half layered silicate polymer nanocomposites have been studied intensively in flame retardancy [...]