Search

We introduce a novel laser-scanning optical microscopy technique that employs optical-frequency-comb (OFC) lasers. This method facilitates multimodal spectroscopic imaging by analyzing interferograms produced via a dual-comb spectroscopic approach. Such interferograms capture comprehensive light information, including amplitude, phase, polarization, frequency, and time of flight information, enabling multimodal imaging from a single measurement. We demonstrate the potential of this technique across several spectroscopic imaging applications., Comment: 11 pages, 8 figures

Refractive-index (RI) sensing plays a pivotal role in various domains, encompassing applications like glucose sensing, biosensing, and gas detection. Despite the advantages of optical fiber sensors, such as their compact size, flexibility, and immunity to electromagnetic interference, they are often plagued by temperature-induced drift, which adversely impacts the accuracy of RI measurements. This study introduces an innovative approach to alleviate temperature-induced drift in RI-sensing optical frequency combs (OFCs) by employing active-dummy compensation. The central idea revolves around the utilization of a dual-comb setup, comprising an active-sensing OFC that monitors both sample RI and environmental temperature, and a dummy-sensing OFC that exclusively tracks environmental temperature. The disparity between these sensor signals, denoted as delta_frep, effectively nullifies the effects of temperature variations, yielding a temperature-independent sensor signal for precise RI measurements. This investigation delves into the relationship between active-dummy temperature compensation and delta_frep. It becomes evident that diminishing delta_frep values enhance temperature compensation, thereby diminishing fluctuations in delta_frep caused by environmental temperature shifts. This compensation technique establishes a direct link between delta_frep and sample RI, paving the way for absolute RI measurements based on delta_frep. The findings of this research are a valuable contribution to the advancement of accurate and temperature-compensated RI sensing methodologies using dual-comb setup. The insights gained regarding delta_frep dependency and the strategies proposed for enhancing measurement precision and stability hold significant promise for applications in fields of product quality control and biosensing., Comment: 25 pages, 9 figures

Spectroscopic polarimetry (SP) is a powerful tool for evaluation of thin film, optical materials, and biological samples because it can provide both polarimetric and spectroscopic characteristics of objects. However, its performance is often hampered by the mechanical instability and the limited data acquisition speed arising from the mechanical polarization modulation. Dual-comb spectroscopic polarimetry (DCSP) based on a combination of SP with dual-comb spectroscopy can acquire optical spectra of amplitude ratio and phase difference in p- and s-polarization components of the output light from simultaneous measurement of optical spectra of optical amplitude and phase in p- and s-polarization components without the need for mechanical polarization modulation. In this article, we combine the DCSP with polarization control pulse sequences (PCPS) with different polarizations and time delays for a more detailed analysis of the sample's polarization response based on Jones matrix. We obtain Jones matrix of a sample as a function of wavelength by measuring those optical spectra while multiplexing the incident light into multiple polarizations instead of a single polarization. Such Jones matrix DCSP (JM-DCSP) is applied for analysis of optical elements with known polarization property and its experimental result is in good agreement with theoretical values, indicating the validity of the proposed method. JM-DCSP will further expand the application scope of SP., Comment: 24 pages, 8 figures

This paper presents a coherent linking approach between confocal amplitude and confocal phase images acquired using dual-comb microscopy (DCM). DCM combines the advantages of confocal laser microscopy and quantitative phase microscopy, offering high axial resolution and scan-less imaging capability. By exploiting the coherence between confocal amplitude and phase images within the same DCM system, we accurately determine the number of phase unwrapping iterations, eliminating phase wrapping ambiguity. The method is demonstrated with samples having micrometer-range optical thickness and nanometer-scale surface roughness. The results showcase an expanded axial dynamic range, ranging from micrometers to millimeters, while maintaining nanometer-level axial resolution. This coherently linked DCM imaging technique enables the simultaneous acquisition of absolute phase information, enhancing its potential for high-axial-resolution imaging in a wide range of applications., Comment: 20 pages, 5 figures

The demand for higher data rates in next-generation mobile wireless communication systems (6G) has led to significant interest in terahertz (THz) waves as a high-frequency, broad modulation bandwidth carrier wave. In this study, we propose and demonstrate a wireless data transfer in the 560-GHz band using low-phase-noise THz waves generated by photomixing of a pair of distributed feedback lasers injection-locking to Kerr micro-resonator soliton comb. Experimental results showed near-error-free on-off keying (OOK) data transfer at 1 Gbit/s in the 560-GHz band, with a Q-factor of 6.23, surpassing the error-free limit. Also, modulation formats of binary phase shift keying (BPSK) and quadrature phase shift keying (QPSK) were successfully used, showing clear constellation diagrams and relatively low root mean squared error vector magnitude (rms EVM) values of 23.9% and 23.6%, respectively. Moreover, data transfer at 0.4 Gbit/s in 16 quadrature amplitude modulation (16QAM) demonstrated clear isolated symbols and achieved a low rms EVM value of 8.1%, complying with the IEEE 802.15.3d standard amendment. These demonstrations highlight the potential of using injection-locked DFB lasers with the Kerr micro-resonator soliton comb to achieve high-quality, high-speed wireless data transfer in the 560-GHz band. These findings contribute significantly to the advancement of wireless communication technology in the THz frequency range and pave the way for the realization of 6G wireless communication systems.

THz waves are promising wireless carriers for next-generation wireless communications, where a seamless connection from wireless to optical communication is required. In this study, we demonstrate carrier conversion from THz waves to dual-wavelength NIR light injection-locking to an optical frequency comb using asynchronous nonpolarimetric electro-optic downconversion with an electro-optic polymer modulator. THz wave in the W band was obtained as a stable photonic RF beat signal of 1 GHz with a signal-to-noise ratio of 25 dB via the proposed THz-to-NIR carrier conversion. In addition, the results imply the potential of the photonic detection of THz waves for wireless-to-optical seamless communication., Comment: 15 pages, 5 figures

Terahertz (THz) waves have attracted attention as carrier waves for next-generation wireless communications (6G). Electronic THz emitters are widely used in current mobile communications; however, they may face technical limitations in 6G with upper-frequency limits. We demonstrate wireless communication in a 560-GHz band by using a photonic THz emitter based on photomixing of a 560-GHz-spacing soliton microcomb in a uni-travelling carrier photodiode together with a THz receiver of Schottky barrier diode. The on-off keying data transfer with 2-Gbit/s achieves a Q-factor of 3.4, thus, satisfying the limit of forward error correction., Comment: 17 pages, 4 figure

Digital holography (DH) is a powerful tool for surface profilometry of objects with sub-wavelength precision. In this article, we demonstrate full-cascade-linked synthetic-wavelength DH (FCL-SW-DH) for nanometer-precision surface metrology of millimeter-size stepped objects. 300 modes of optical frequency comb (OFC) with different wavelengths are sequentially extracted at a step of mode spacing from a 10GHz-spacing, 3.72THz-spanning electro-optic modulator OFC (EOM-OFC). The resulting 299 synthetic wavelengths and a single optical wavelength are used to generate a fine-step wide-range cascade link covering within a wavelength range of 1.54 um to 29.7 mm. We determine the 0.1000mm-stepped surface with axial uncertainty of 6.1 nm within the maximum axial range of 14.85 mm., Comment: 22 pages, 6 figures

Fluorescence lifetime imaging microscopy (FLIM) is a powerful tool for quantitative fluorescence imaging because fluorescence lifetime is independent of concentration of fluorescent molecules or excitation/detection efficiency and is robust to photobleaching. However, since FLIM is based on point-to-point measurements, mechanical scanning of a focal spot is needed for forming an image, which hampers rapid imaging. In this article, we demonstrate scan-less full-field FLIM based on a one-to-one correspondence between two-dimensional (2D) image pixels and frequency-multiplexed RF signals. A vast number of dual-optical-comb beats between dual optical frequency combs is effectively adopted for 2D spectral mapping and high-density frequency multiplexing in radio-frequency region. Bimodal images of fluorescence amplitude and lifetime are obtained with high quantitativeness from amplitude and phase spectra of fluorescence RF comb modes without the need for mechanical scanning. The proposed method will be useful for rapid quantitative fluorescence imaging in life science., Comment: 38 pages, 8 figures, 1 table

Dual-comb microscopy (DCM), based on a combination of dual-comb spectroscopy (DCS) with two-dimensional spectral encoding (2D-SE), is a promising method for scan-less confocal laser microscopy giving an amplitude and phase image contrast with the confocality. However, signal loss in a 2D-SE optical system hampers increase in image acquisition rate due to decreased signa-to-noise ratio. In this article, we demonstrated optical image amplification in DCM with an erbium-doped fiber amplifier (EDFA). Combined use of image-encoded DCS interferogram and EDFA benefits from not only the batch amplification of amplitude and phase images but also significant rejection of amplified spontaneous emission (ASE) background. Effectiveness of the optical-image-amplified DCM is highlighted in the single-shot quantitative nanometer-order surface topography and the real-time movie of polystyrene beads dynamics under water convection. The proposed method will be a powerful tool for real-time observation of surface topography and fast dynamic phenomena., Comment: 20 pages, 6 figures

Spectroscopic ellipsometry is a means to investigate optical and dielectric material responses. Conventional spectroscopic ellipsometry has trade-offs between spectral accuracy, resolution, and measurement time. Polarization modulation has afforded poor performance due to its sensitivity to mechanical vibrational noise, thermal instability, and polarization wavelength dependency. We equip a spectroscopic ellipsometer with dual-optical-comb spectroscopy, viz. dual-optical-comb spectroscopic ellipsometry (DCSE). The DCSE directly and simultaneously obtains amplitude and phase information with ultra-high spectral precision that is beyond the conventional limit. This precision is due to the automatic time-sweeping acquisition of the interferogram using Fourier transform spectroscopy and optical combs with well-defined frequency. Ellipsometric evaluation without polarization modulation also enhances the stability and robustness of the system. In this study, we evaluate the DCSE of birefringent materials and thin films, which showed improved spectral accuracy and a resolution of up to 1.2x10-5 nm across a 5-10 THz spectral bandwidth without any mechanical movement., Comment: 30 pages, 4 figures

Confocal imaging and phase imaging are powerful tools in life science research and industrial inspection. To coherently link the two techniques with different depth resolutions, we introduce an optical frequency comb (OFC) to microscopy. Two-dimensional (2D) image pixels of a sample were encoded onto OFC modes via 2D spectral encoding, in which OFC acted as an optical carrier with a vast number of discrete frequency channels. Then, a scan-less full-field confocal image with a depth resolution of 62.4 um was decoded from a mode-resolved OFC amplitude spectrum obtained by dual-comb spectroscopy. Furthermore, a phase image with a depth resolution of 13.7 nm was decoded from a mode-resolved OFC phase spectrum under the above confocality. The phase wrapping ambiguity can be removed by the match between the confocal depth resolution and the phase wrapping period. The proposed hybrid microscopy approach will be a powerful tool for a variety of applications., Comment: 32 page, 6 figures