83 results on '"Hassan, Nornikman"'
Search Results
2. CPW Pentagonal Patch Antenna with Multiple Slots Effect for WLAN and WiMAX Applications
- Author
-
Ab Rashid, Amier Hafizun, primary, Hassan, Nornikman, additional, Ahmad, Badrul Hisham, additional, Mazalan, Mazlee, additional, Abidin Abd Aziz, Mohamad Zoinol, additional, and Mahmod, Nurzaima, additional
- Published
- 2023
- Full Text
- View/download PDF
3. Compact Dual-Layered Wideband Wearable Monopole Antenna with Circular Parasitic Element for Breast Cancer Detection
- Author
-
Binti Koma'rudin, Nur'Atika, primary, Zakaria, Zahriladha, additional, Hassan, Nornikman, additional, Jumidali, Mohd Manoi, additional, and Soh, Ping Jack, additional
- Published
- 2023
- Full Text
- View/download PDF
4. UHF RFID tag antennas for wearable devices.
- Author
-
Azemi, Saidatul Norlyana, Azemin, Wan Nur Azreen, Amir, Amiza, Beson, Rashidi Che, and Hassan, Nornikman
- Subjects
WEARABLE antennas ,IMPEDANCE matching ,ANTENNAS (Electronics) ,ANTENNA design ,REFLECTANCE ,SPIRAL antennas - Abstract
RFID technology is evolving as one of the most popular technologies in this era of technology, fast gaining attention due to high demand from users and rapidly garnering interest in scientific and commercial areas. The frequency used will be determined by the RFID application, and the power rate will change as the frequency increases. Without a straight line of sight, the RFID tag antenna can identify distinct objects. For wearable applications, several RFID tag antennas are too big to match the chip impedance. In order to overcome that problem, a small tag RFID tag antenna for UHF is designed which aimed to be operated from 865 to 867 MHz for assembling production. Impedance matching is used to transforms the impedance of the radiating antenna, to match the chip impedance. To design and simulate the designed antenna, CST Microwave Studio software has been used in this project to get the desired result which is the return loss and gain. The design for this antenna is very simple to ease the fabrication process. Overall, the construction comprises a spiral-shaped loop RFID tag antenna printed on Roger substrate RO4350 with a height of 0.8 mm and a dielectric constant of 3.3. The simulation result of the reflection coefficient of the antenna is 866 MHz at the operating frequency. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
5. Circular Polarized Patch Antenna for 1.8 and 2.4 GHz Applications
- Author
-
Azizi, Muhammad Syafiq Noor, Malek, Mohd Fareq Abd, Hassan, Nornikman, Aziz, Mohamad Zoinol Abidin Abd., Ismail, Mohd Khairy, Basir, Nur Azimah, Iswandi, Muhamad Faisal, Norhasmazuani, Nurul, Ahmad, Badrul Hisham, Mukhtar, Nurhakimah Mohd, Jusoh, Mohd Asri, Sulaiman, Hamzah Asyrani, editor, Othman, Mohd Azlishah, editor, Abd. Aziz, Mohamad Zoinol Abidin, editor, and Abd Malek, Mohd Fareq, editor
- Published
- 2015
- Full Text
- View/download PDF
6. 2 × 1 Circular Array Patch Antennas with Double Circular Slots for WLAN Application
- Author
-
Salleh, Nik Muhammad Farid Nik Mohd, Malek, Mohd Fareq Abd, Hassan, Nornikman, Rashid, Amier Hafizun Ab, Aziz, Mohamad Zoinol Abidin Abd., Seman, Mohd Khairulezmi Che, Nor, Nornabila Md, Amiruddin, Saidatul Adawiyah, Ahmad, Badrul Hisham, Abdullah, Ahmad Zaidi, Noorpi, Nur Sabrina Md, Sulaiman, Hamzah Asyrani, editor, Othman, Mohd Azlishah, editor, Abd. Aziz, Mohamad Zoinol Abidin, editor, and Abd Malek, Mohd Fareq, editor
- Published
- 2015
- Full Text
- View/download PDF
7. CPW Fractal Antenna with Third Iteration of Pentagonal Sierpinski Gasket Island for 3.5 GHz WiMAX and 5.2 GHz WLAN Applications
- Author
-
Hafizun Ab Rashid, Amier, primary, Hisham Ahmad, Badrul, additional, Zoinol Abidin Abd Aziz, Mohamad, additional, and Hassan, Nornikman, additional
- Published
- 2023
- Full Text
- View/download PDF
8. Fork-like shaped monopole antenna with defected parasitic elements and ring slots.
- Author
-
M. Z. A. Abd. Aziz, B. I. Asadingo, Hassan Nornikman, M. H. Ramli, Badrul Hisham Ahmad, and Mohd Azlishah Othman
- Published
- 2014
- Full Text
- View/download PDF
9. Printed omnidirectional antenna for RFID applications.
- Author
-
M. Z. A. Abd. Aziz, M. Md. Shukor, Mohamad Kadim Suaidi, Badrul Hisham Ahmad, Fauzi Mohd Johar, Hassan Nornikman, Farah Ayuni Azmin, S. N. Salleh, and Mohd Fareq Abd. Malek
- Published
- 2013
- Full Text
- View/download PDF
10. Investigation of impedance modeling for a unit cell of the circle loop Frequency Selective Surface at 2.4GHz.
- Author
-
Noor Azamiah Md Fauzi, Mohamad Zoinol Abidin Abdul Aziz, Maizatul Alice Meor Said, Mohd Azlishah Othman, Badrul Hisham Ahmad, Mohamad Kadim Suaidi, Mohamad Hafize Ramli, Hassan Nornikman, and Mohd Fareq Abd. Malek
- Published
- 2014
- Full Text
- View/download PDF
11. A miniaturized Monopole Antenna with Triple-Notch Filters for UWB Applications.
- Author
-
SAIFUL BAHRI, Ika Dewi, ZAKARIA, Zahriladha, SHAIRI, Noor Azwan, HASSAN, Nornikman, MOHD BAHAR, Amyrul Azuan, and Abdullah Al-Gburi, Ahmed Jamal
- Subjects
NOTCH filters ,MONOPOLE antennas ,TELECOMMUNICATION satellites ,ANTENNAS (Electronics) ,MICROSTRIP transmission lines - Abstract
Copyright of Przeglad Elektrotechniczny is the property of Przeglad Elektrotechniczny and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
- Published
- 2023
- Full Text
- View/download PDF
12. Electromagnetically Coupled High Efficiency Orthogonal MIMO Antenna for 5G and Wireless Applications
- Author
-
S J Vignesh, Hassan Nornikman, Badrul Hisham Ahmad, and D. Yadav
- Subjects
Computer science ,business.industry ,Bandwidth (signal processing) ,Astrophysics::Instrumentation and Methods for Astrophysics ,Data_CODINGANDINFORMATIONTHEORY ,Lossy compression ,Hardware_GENERAL ,Electronic engineering ,Communications satellite ,Wireless ,Ka band ,Standing wave ratio ,Latency (engineering) ,Antenna (radio) ,business ,Computer Science::Information Theory - Abstract
This paper illustrates a novel design for a MIMO antenna that operates in the frequency range of 26 GHz – 40 GHz (Ka band). The proposed antenna demonstrates 2 x 2 arrangement of electro-magnetically coupled patches that are arranged orthogonally to each other in order to produce a good isolation and ECC with respect to other antennas. The patch of the antenna has been embedded on a Rogers RO 3003 (lossy) substrate. The copper patch has been embedded on the substrate with a thickness of 0.018 mm. The purpose of designing such MIMO Antenna’s is mainly due to their ability to achieve high gain, efficiency and bandwidth and produce low latency rates. The ground of the antenna has been modified various designs with a V slot and a Defected Ground Structure (DGS) which helps in improving the characteristics of the antenna such as gain, VSWR and farfield. The proposed antenna can be easily integrated into modern communication devices due to its highly compact size and it’s easy to fabricate structure which makes it highly versatile to be used for 5G and satellite communication devices. All the parameters of the antenna have been simulated using Computer Simulation Technology (CST).
- Published
- 2021
13. Circular Polarized Patch Antenna for 1.8 and 2.4 GHz Applications
- Author
-
Azizi, Muhammad Syafiq Noor, primary, Malek, Mohd Fareq Abd, additional, Hassan, Nornikman, additional, Aziz, Mohamad Zoinol Abidin Abd., additional, Ismail, Mohd Khairy, additional, Basir, Nur Azimah, additional, Iswandi, Muhamad Faisal, additional, Norhasmazuani, Nurul, additional, Ahmad, Badrul Hisham, additional, Mukhtar, Nurhakimah Mohd, additional, and Jusoh, Mohd Asri, additional
- Published
- 2015
- Full Text
- View/download PDF
14. 2 × 1 Circular Array Patch Antennas with Double Circular Slots for WLAN Application
- Author
-
Salleh, Nik Muhammad Farid Nik Mohd, primary, Malek, Mohd Fareq Abd, additional, Hassan, Nornikman, additional, Rashid, Amier Hafizun Ab, additional, Aziz, Mohamad Zoinol Abidin Abd., additional, Seman, Mohd Khairulezmi Che, additional, Nor, Nornabila Md, additional, Amiruddin, Saidatul Adawiyah, additional, Ahmad, Badrul Hisham, additional, Abdullah, Ahmad Zaidi, additional, and Noorpi, Nur Sabrina Md, additional
- Published
- 2015
- Full Text
- View/download PDF
15. Broadband Circular Polarization Antenna Based on Inverted Suspended Circular Patch with Square Slot
- Author
-
Abu Bakar Hamizan, Bin Abd Aziz Mohamad Zoinol Abidin, Ahmad Badrul Hisham, and Hassan Nornikman
- Subjects
Engineering (General). Civil engineering (General) ,TA1-2040 - Abstract
In this paper, an inverted suspended circular patch with square slot design is proposed for broadband circular polarized antenna. The antenna was designed based on L-probe technique and air gap of 10 mm distance between substrate and copper ground. L-probe technique is used in this antenna design to feed the 50 Ohm SMA connector signal through the feedline to the antenna structure. The proposed antenna had been designed and simulated by using computer simulation technology (CST) software. This antenna design is targeted for wireless local area network (WLAN) application which operating frequency at 2.4 GHz. Antenna performances in term of return loss, resonant frequency, bandwidth, gain, axial ratio, directivity, total efficiency and radiation pattern at the design frequency are analyzed. Result of simulation show that the proposed antenna achieved axial ratio below 3 dB which is 0.62 dB with return loss -35.60 dB at targeted frequency. Comparison result of simulation and measurement show that the return loss bandwidth (RLBW) and realized gain of the antenna at 2.4 GHz frequency decreases from 556 MHz to 354 MHz with gain 7.76 dB to 4.54 dB. However, the proposed antenna covers a wider bandwidth of 2.4 GHz where both simulation and measurement bandwidth is over 350 MHz.
- Published
- 2017
- Full Text
- View/download PDF
16. A Review of Recent Microwave Breast Imaging
- Author
-
Koma'rudin, Nur' Atika, primary, Zakaria, Zahril Adha, additional, Soh, Ping Jack, additional, Lago, Herwansyah, additional, Alsariera, Hussein, additional, and Hassan, Nornikman, additional
- Published
- 2020
- Full Text
- View/download PDF
17. Kapton Based Antenna Simulation Analysis for Smart System
- Author
-
Abdul Halim Dahalan, Hassan Nornikman, Siti Zuraidah Ibrahim, Mzaa Aziz, and Mohd Azlishah Othman
- Subjects
Smart system ,Materials science ,business.industry ,Mechanical Engineering ,Materials Science (miscellaneous) ,Antenna design ,020208 electrical & electronic engineering ,Bandwidth (signal processing) ,020206 networking & telecommunications ,02 engineering and technology ,Microwave frequency ,Dielectric ,Industrial and Manufacturing Engineering ,Kapton ,Software ,Mechanics of Materials ,0202 electrical engineering, electronic engineering, information engineering ,Optoelectronics ,Electrical and Electronic Engineering ,Antenna gain ,business ,Civil and Structural Engineering - Abstract
This paper describes the analysis of Kapton material in antenna design for telecommunication systems. Kapton is usually used in the design of radio and microwave frequency antenna. It is a flexible material and with different dielectric value. The antenna is made of a Kapton substrate, a patch and copper (FR4). The dielectric characteristics of Kapton substrate changes according to temperature. The simulation result shows that the bandwidth of the antenna increased up to 10 MHz with a second layer of Kapton substrate. While the antenna gain decreased 1.19 dB when the dielectric value is increased. Computer Simulation Technology (CST) software was used to analyse the antenna’s performance.
- Published
- 2019
18. Multiband Minkowski Fractal Patch Antenna with Rhombic SRR for Wireless LAN and WiMAX Applications
- Author
-
M. Z. A. Abd Aziz, Hassan Nornikman, Badrul Hisham Ahmad, M. K. Ismail, Zahriladha Zakaria, and N. E. S Ramlee
- Subjects
Patch antenna ,Physics ,business.industry ,020208 electrical & electronic engineering ,Astrophysics::Instrumentation and Methods for Astrophysics ,020206 networking & telecommunications ,Antenna effect ,02 engineering and technology ,Topology ,WiMAX ,Split-ring resonator ,Fractal ,Minkowski space ,0202 electrical engineering, electronic engineering, information engineering ,Wireless ,Reflection coefficient ,business ,Computer Science::Information Theory - Abstract
In this paper, the Minkowski fractal patch antenna with combination of rhombic split ring resonator (SRR) structure are proposed for Wireless LAN and WIMAX applications. In the early stage, the normal square patch antenna is mainly designed in CST Microwave Studio simulation software. At that moment, the Minkowski patch antenna was designed using 1st iteration and 2nd iteration technique. The next step is adding the rhombic SRR at side of Minkowski fractal patch antenna. The proposed antenna effect to create a multiband frequency at different location at 2.43 GHz, 2.76 GHz and 5.36 GHz with the reflection coefficient of −16.366 dB, −10.624 dB and −18.030 dB, respectively.
- Published
- 2018
19. Tri-polarized Patch Antenna with X-Shaped Element for Wireless LAN MIMO System
- Author
-
Hassan Nornikman, Badrul Hisham Ahmad, Zahriladha Zakaria, M. K. Ismail, M. Z. A. Abd Aziz, and C. S. Siang
- Subjects
Microwave studio ,Patch antenna ,Computer science ,business.industry ,Antenna design ,ComputerSystemsOrganization_COMPUTER-COMMUNICATIONNETWORKS ,MIMO ,Electrical engineering ,Data_CODINGANDINFORMATIONTHEORY ,Polarization (waves) ,Hardware_GENERAL ,Wireless communication systems ,ComputerApplications_MISCELLANEOUS ,Wireless lan ,Return loss ,ComputerSystemsOrganization_SPECIAL-PURPOSEANDAPPLICATION-BASEDSYSTEMS ,business - Abstract
In this paper, a tri-polarized antenna is with X-shaped element for multiple-input multiple-output (MIMO) wireless communication system had been design in CST Microwave Studio and fabricated in the laboratory. This antenna had three different stage of Antenna Design A, Antenna Design B and Antenna Design C. The first stage consists of Antenna Design A1, Design A2 and Design A3 that created to produce single polarization at frequency 2.4 GHz. Then, the Antenna Design B is then made up by joining Antenna Design A1 and Antenna Design A2 in a same antenna structure. The last stage is Antenna Design C that consist three different design - Antenna Design C1, Design C2 and Design C3. These antennas consist three different ports – Port 1, Port 2 and Port 3 that effect tri- polarized antenna. At the Port 3 of Antenna Design C3, the return loss performance of simulation and measurement of the antenna are 2.412 GHz and 2.48 GHz with −23.205 dB and −10.101 dB, respectively.
- Published
- 2018
20. Dual Circular-Polarized Slot Antenna Design for Wireless MIMO System at 2.4 GHz
- Author
-
Mona Riza Mohd Esa, Mohd Riduan Ahmad, Hassan Nornikman, C. S. Siang, Badrul Hisham Ahmad, Zahriladha Zakaria, and M. Z. A. Abd Aziz
- Subjects
Physics ,Axial ratio ,business.industry ,Acoustics ,MIMO ,020206 networking & telecommunications ,Slot antenna ,Port (circuit theory) ,02 engineering and technology ,law.invention ,020401 chemical engineering ,law ,0202 electrical engineering, electronic engineering, information engineering ,Return loss ,Wireless ,Wi-Fi ,0204 chemical engineering ,Antenna (radio) ,business - Abstract
This work proposed a dual circular-polarized slot antenna for wireless local area network (WLAN) application at 2.4 GHz. The proposed design is simulated by using FR-4 as is substrates. In this work, three stages of antenna had been simulated in CST Microwave Studio. First two antenna, Design 1-A and Design 1-B is containing a single polarized antenna with different feedline port location. An X-shaped structure is located at the middle of the patch at angle of 42.5 degrees. Then, dual feedline port antenna, Design B1 are designed to create dual circular-polarized effect. The return loss S11 results at 2.4 GHz of Design 2-A antenna are - 21.511 dB and–28.48 dB for simulation results and measurement results, respectively. For axial ratio for Port 1 and Port 2 are 0.63 and 1.12, respectively. In the end, the simulation and measured antenna design are compared.
- Published
- 2018
21. Design of dual-band microstrip patch antenna with right-angle triangular aperture slot for energy transfer application
- Author
-
Hassan, Nornikman, primary, Zakaria, Zahriladha, additional, Sam, Weng Yik, additional, Hanapiah, Izyan Nazihan Mohd, additional, Mohamad, A. Nasoruddin, additional, Roslan, Ameer Farhan, additional, Ahmad, Badrul Hisham, additional, Ismail, Mohd Khairy, additional, and Abd Aziz, Mohamad Zoinol Abidin, additional
- Published
- 2019
- Full Text
- View/download PDF
22. Two layered 2 × 1 Koch Curve patch array antenna with suspended air gap effect for wireless LAN applications
- Author
-
Obada Al-Khatib, H. A. Bakar, M. Abdulmalek, Badrul Hisham Ahmad, N. Y. Ann, N. Razak, Hasliza A. Rahim, M. Z. A. Abd Aziz, Hassan Nornikman, N. Salman, Nidhal Abdulaziz, and J. Y. L. Shen
- Subjects
Patch antenna ,Physics ,law ,Acoustics ,Return loss ,Array data structure ,Wi-Fi ,Antenna gain ,Air gap (plumbing) ,Equilateral triangle ,Koch snowflake ,law.invention - Abstract
This paper proposed a two layered 2 × 1 Koch Curve patch array antenna design with suspended air gap technique for Wireless Local Area Network (WLAN) application of 2.4 GHz resonant frequency. This proposed patch antenna is using two FR-4 substrate layers with dielectric constant, e r = 4.4 and the electrical conductivity tangent loss, tanΔ = 0.019. It is using the suspended air gap technique between two layers for enhancement effect of antenna gain from 4.89 dB to 5.18 dB. At the upper part of substrate, it consists a two feeding networks that connected the two patch of Koch Curve array patch. Beside antenna gain, this technique also improves the bandwidth and return loss of the antenna. It also contains a Koch Curve array structure at the patch part and have a full ground of copper at the back. This Koch Curve is design based on the basic equilateral triangle with three iteration steps. For the first iteration step, it be made up of the equilateral triangular shaped while the second iteration are added with mirror design of equilateral triangular to create a six segment of star-shaped. For the third iteration step, the equilateral triangle with the length base on previous iteration step is constructed on top of the side line of the base triangle. This third iteration step of the Koch Curve effect the reduction size of the patch antenna from 100 mm × 100mm to only 90mm × 60 mm. The return loss performance at resonant frequency 2.4 GHz is −32.735 dB.
- Published
- 2017
23. Co-planar waveguide (CPW) slotted bow-tie antenna with band-notch using polygon-shaped branches structure
- Author
-
Obada Al-Khatib, Hassan Nornikman, Nidhal Abdulaziz, M. S. Mustapha, Badrul Hisham Ahmad, M. Abdulmalek, M. M. D. Mohamad Muslihat, S. B. York, M. Z. A. Abd Aziz, Hasliza A. Rahim, N. S. M. Nazim, and S. H. Mohd Yusof
- Subjects
Physics ,Patch antenna ,business.industry ,Frequency band ,Bandwidth (signal processing) ,Slot antenna ,Bow tie ,Microstrip ,law.invention ,Optics ,Planar ,law ,Dipole antenna ,business - Abstract
Nowadays, the world has rapidly evolved in the communication system in term of speed and information capacity. Thus, a bow-tie antenna is the suggestion to use because of its exhibits low profile and lightweight. However, the bow-tie patch antenna, inherently have narrow bandwidths and in general are half wavelength structures operating at the fundamental resonant mode. To cater this problem, a slotted bow-tie antenna is designed for wireless applications with consist techniques a pair of polygon-shaped branches structure is implemented on each arm of the bow-tie slot antenna characteristics. The co-planar waveguide is applied to this antenna to effect the wider bandwidth to the antenna. This proposed CPW slotted bow-tie antenna is using FR-4 substrate with dielectric constant, e r = 4.4 and the electrical conductivity tangent loss, tan Δ = 0.019 with substrate dimension of 52.4 mm length × 22.3 mm width. Several parametric studies are done to make sure the suitable dimension for best antenna performance. In this case, several different dimensions of three part are consider to study, such as the microstrip line width (W ml ), height of feedline (H fl ), and the length of branch, L br . The basic antenna without polygon-shaped branches can offer a wider frequency band operation at 2.293 GHz–2.541 GHz with bandwidth of 248 MHz effect by the co-planar waveguide technique. After the addition of the polygon-shaped branches structure to the bow-tie part, its effect a band-notch effect at the 2.46 GHz, while creating a new resonant frequency at two different part at 2.394 GHz and 2.511GHz with resonant frequency of −18.585dB and 19.555dB, respectively.
- Published
- 2017
24. Double U-slots stacked patch antenna with copper plate and air gap for wireless LAN applications
- Author
-
Obada Al-Khatib, H. A. Bakar, N. Rosli, M. Z. A. Abd Aziz, Hasliza A. Rahim, Ping Jack Soh, M. Abdulmalek, M. K. A. Zakaria, Badrul Hisham Ahmad, Z. Kamal, N. A. M. Nik Amri, and Hassan Nornikman
- Subjects
Patch antenna ,Microstrip antenna ,Materials science ,Air gap (networking) ,business.industry ,Acoustics ,ComputerSystemsOrganization_COMPUTER-COMMUNICATIONNETWORKS ,Broadband ,Return loss ,Wireless ,business ,Microstrip ,Ground plane - Abstract
With the higher speed growth and wide use of wireless telecommunication technology in recent years, the demand for miniature size, low profile, broadband and high gain antennas have increased so rapidly. The slots at the patch antenna is one of the technique can be used to cater this problem. This works proposed a stacked patch antenna with double U-slots structure technique at the patch antenna for Wireless LAN application. This proposed stacked patch antenna is designed on FR-4 substrate with dielectric constant of 4.4 and substrate thickness of 1.6mm with an air gap between the substrate and ground. Firstly, a basic patch antenna had been design. Then, a 65mm × 65mm stacked patch of copper plate was used as the ground plane under-shape patch. By integrating the stacked patch with air gap and the double U-slots techniques, the proposed designed offer an improvement in term of the gain and wide bandwidth of the antenna. A parametric study is of the patch width, patch length and length slot are determined to realize the antenna design. The results show the gain values increased from 7.189 dB to 7.358dB at resonant frequency of 2.4 GHz with a return loss of −14.739 dB. The increment of the length of slot effects the increase value of the return loss of the antenna. Compare with the basic antenna with 100 MHz of bandwidth, the performance for this proposed antenna is 120 MHz with the operating frequency range from 2.34 GHz to 2.46 GHz.
- Published
- 2017
25. Single linear-polarized and single circular-polarized slot antenna for WLAN application
- Author
-
M. Abdulmalek, Nidhal Abdulaziz, Obada Al-Khatib, Badrul Hisham Ahmad, Hassan Nornikman, C. S. Siang, H. A. Bakar, M. Z. A. Abd Aziz, and Abigail Copiaco
- Subjects
Patch antenna ,Physics ,Permittivity ,Optics ,Dimension (vector space) ,business.industry ,Electrical resistivity and conductivity ,Return loss ,Feed line ,Slot antenna ,Antenna (radio) ,business - Abstract
This project proposed a single linear-polarized and a single circular-polarized patch antenna are design for WLAN applications at 2.4 GHz. This antenna is using FR-4 substrate with permittivity, e r = 4.4 and the electrical conductivity tangent loss, tan Δ = 0.019. Three design antennas with same dimension size but with different feed line configuration had been consider as Design A, Design B and Design C. Design A and C have a better measured return loss of − 25.38 dB and − 24.384 dB, respectively. Beside that the Design B shows the performance of − 15.976 dB only.
- Published
- 2017
26. Co-planar waveguide (CPW) patch antenna with octagonal-shaped ring for WiMAX application
- Author
-
A. A. A. Md Daud, H. A. Bakar, M. F. Rosdin, Hasliza A. Rahim, W. L. Yoong, Hassan Nornikman, M. Abdulmalek, M. A. Z. Mohd Tahir, M. Z. A. Abd Aziz, Obada Al-Khatib, Badrul Hisham Ahmad, and L. Y. Yee
- Subjects
Patch antenna ,Physics ,Planar ,business.industry ,Bandwidth (signal processing) ,Return loss ,Optoelectronics ,Dielectric ,Antenna gain ,business ,WiMAX ,Microwave - Abstract
WiMAX (Worldwide Interoperability for Microwave Access) is a part of wireless communication standards based on the IEEE 802.16 set of standards. In this work, a co-planar waveguide (CPW) patch antenna with octagonal-shaped ring had been design for WiMAX application of 3.5 GHz. This proposed CPW antenna is using FR-4 substrate with dielectric constant, e r = 4.4 and the electrical conductivity tangent loss, tan Δ = 0.019. There are three stages of the antenna design that consist the Design A — basic rectangular patch antenna, the Design B — rectangular patch antenna with octagonal-shaped ring while the last stage is Design C rectangular patch antenna with octagonal-shaped ring with CPW effect. A parametric study of CPW length, LCPW had been done to make sure the best return loss performance and the location of the resonant frequency near to WiMAX frequency range. In this case, nine different dimensions of LCPW that considers is from 11 mm to 19 mm. It shows that the LCPW = 18 mm shows the resonant frequency of T 3.528dB. The CPW patch antenna with octagonal-shaped ring effect a wider bandwidth and create two resonant frequencies. It shows that the proposed antenna covers from the 2.282 GHz to 4.216 GHz, with bandwidth of 1.978 GHz, improve from Design A and Design B of 0.11 GHz and 0.73 GHz, respectively. Two resonant frequencies are located at 2.59 GHz and 3.528 GHz with return loss of −23.89 dB and −34.78 dB, respectively. The antenna gain of Design C is improve to 2.92 dB, after the addition of the CPW technique.
- Published
- 2017
27. Mutual coupling reduction for 5 GHz PIFAs in MIMO terminal
- Author
-
Mohd Faizal Jamlos, Badrul Hisham Ahmad, A.A. Al-Hadi, Hassan Nornikman, Che Muhammad Nor Che Isa, Saidatul Norlyana Azemi, Herwansyah Lago, and M. Ezanuddin
- Subjects
Physics ,Planar ,Optics ,business.industry ,020208 electrical & electronic engineering ,Bandwidth (signal processing) ,MIMO ,0202 electrical engineering, electronic engineering, information engineering ,020206 networking & telecommunications ,02 engineering and technology ,Reflection coefficient ,business ,Ground plane - Abstract
In this paper, two planar inverted-F antennas on a slitted ground plane is proposed for MIMO mobile terminal. This antenna is designed to operate at 5 GHz with 1 GHz bandwidth. In simulation stage, the length and width of slitted are varied. The optimum slit's dimension is shown to be λ/4 length and 0.0333λ width, which produced reflection coefficient of −16.38 dB and isolation of −23.52 dB at 5 GHz, while maintaining 1 GHz bandwidth. It is found that the slitted ground plane has resulted a better isolation of 7.2 dB compared to the full ground plane. Simulated and measured results indicate a satisfactory agreement.
- Published
- 2017
28. Microwave Planar Sensor for Determination of the Permittivity of Dielectric Material
- Author
-
Khairy Ismail, Mohd, primary, Zakaria, Zahriladha, additional, Hassan, Nornikman, additional, Weng Yik, Sam, additional, and Mawardy Abdullah, Mohd, additional
- Published
- 2018
- Full Text
- View/download PDF
29. Number of Iteration Analysis for Complex FSS Shape Using GA for Efficient ESG
- Author
-
Hassan, Nornikman, primary, Zakaria, Zahriladha, additional, Hisham Ahmad, Badrul, additional, Che Pee, Naim, additional, Nadzirah Salleh, Siti, additional, Zoinol Abidin Abd Aziz, Mohamad, additional, Fareq Abdul Malek, Mohd, additional, and Khairy Ismail, Mohd, additional
- Published
- 2018
- Full Text
- View/download PDF
30. A Compact Low Noise Amplifier with Defected Microstrip Structure for Ultra-Wideband Communications
- Author
-
Saifullah, Nasrullah, primary, Zakaria, Zahriladha, additional, Yik, Sam Weng, additional, Hassan, Nornikman, additional, and Shairi, Noor Azwan, additional
- Published
- 2018
- Full Text
- View/download PDF
31. Design Tri-Band Fractal Antenna with Minkowski Island Split Ring Resonator Structures
- Author
-
Mohamad Zoinol Abidin Abd Aziz, Hassan Nornikman, Badrul Hisham Ahmad, and Muhammad Ramlee Kamarudin
- Subjects
Patch antenna ,Split-ring resonator ,Microstrip antenna ,Optics ,Dielectric resonator antenna ,business.industry ,General Medicine ,Antenna (radio) ,business ,Fractal antenna ,Microstrip ,Mathematics ,Metamaterial antenna - Abstract
The paper investigates the effect of Minkowski Island split ring resonator (MI-SRR) on the microstrip fractal patch antenna. Firstly, a basic Minkowski Island had been simulated in the CST Microwave Studio. Then, the addition of several sizes of the Minkowski Island split ring resonator on the substrate had been generated tri-band resonant frequencies. The optimal result of this tri-band antenna 2.394 GHz, 3.528 GHz and 5.257 GHz with a gain of 0.874 dB, 1.41 dB and 2.94 dB and the reflection coefficient magnitudes of - 21.945 dB, - 17.154 dB and – 16.536 dB. The reflection coefficient magnitudes of the simulation and fabricated antenna also had been compared. The target application for this antenna is for WLAN and WiMAX.
- Published
- 2015
32. A review on echo and phase inverted scanning in acoustic microscopy for failure analysis.
- Author
-
Ahmad, Badrul Hisham, Al-Shaikhli, Taha Raad, Hassan, Nornikman, Ibrahim, Ayman Mohammed, Lim, P. E., and Nordin, Nurul Syahira
- Subjects
ACOUSTIC microscopy ,FAILURE analysis ,INTEGRATED circuits ,LITERATURE reviews - Abstract
Copyright of Przeglad Elektrotechniczny is the property of Przeglad Elektrotechniczny and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
- Published
- 2021
- Full Text
- View/download PDF
33. DEVELOPMENT OF PYRAMIDAL MICROWAVE ABSORBER USING SUGAR CANE BAGASSE (SCB)
- Author
-
Hassan Nornikman, Liyana Zahid, Nur Adyani Mohd Affendi, M. Z. A. A. Aziz, Badrul Hisham Ahmad, Nuriziani Hussin, Azuwa Ali, and Mohd Fareq Abd Malek
- Subjects
Microwave studio ,Radiation ,Materials science ,Anechoic chamber ,Sugar cane ,Dissipation factor ,Development (differential geometry) ,Dielectric ,Electrical and Electronic Engineering ,Composite material ,Condensed Matter Physics ,Bagasse ,Microwave absorber - Abstract
The need to flnd ways to efiectively utilize the large quantities of agricultural waste that are produced is indicative of the huge potential associated with producing an alternative pyramidal microwave absorber for anechoic chamber-testing applications. We propose the development of a pyramidal microwave absorber that can use sugar cane bagasse (SCB), a byproduct from the production and processing of sugar cane, as the absorbent. In this paper, we report the results of our use of dielectric probe measurement to determine the dielectric constant and loss tangent of SCB. These values were used to model and simulate an SCB pyramidal microwave absorber in Computer Simulation Technology's (CST's) Microwave Studio. This absorber was operated in the microwave frequency range between 0.1GHz and 20.0GHz.
- Published
- 2013
34. STUDY AND SIMULATION OF AN EDGE COUPLE SPLIT RING RESONATOR (EC-SRR) ON TRUNCATED PYRAMIDAL MICROWAVE ABSORBER
- Author
-
Hassan Nornikman, M. Z. A. A. Aziz, Hindstan Imran, and Abdul Rani Othman, Badrul Hisham Ahmad, and Mohd Fareq Abd Malek
- Subjects
Microwave studio ,Radiation ,Materials science ,business.industry ,Edge (geometry) ,Low frequency ,Condensed Matter Physics ,computer.software_genre ,Microwave absorber ,Simulation software ,Split-ring resonator ,Optics ,Electrical and Electronic Engineering ,business ,computer ,Microwave - Abstract
Split ring resonator (SRR) structure can potentially be incorporated onto the truncated pyramidal microwave absorber. This study considers three difierent patterns of edge couple split ring resonator (EC-SRR) designs. Each EC-SRR design is then placed onto the truncated pyramidal microwave absorber. Outer split gap dimension widths of the EC-SRR are varied, and the various S21 performances are compared. This EC-SRR truncated pyramidal microwave absorber is simulated using CST Microwave Studio simulation software. The study and simulation are performed in low frequency range (0.01GHz to 1GHz) as well as in microwave frequencies range (1GHz to 20GHz). Simulation results of this EC- SRR show improvement of re∞ection loss and S11 performance in the high frequency range of the pyramidal truncated microwave absorber.
- Published
- 2012
35. Parametric study on microstrip bow-tie patch antenna with complementary split ring resonator
- Author
-
Hassan Nornikman and Badrul Hisham Ahmad
- Subjects
Split-ring resonator ,Patch antenna ,Physics ,Microstrip antenna ,Directional antenna ,law ,Acoustics ,Return loss ,Electronic engineering ,Optical ring resonators ,Antenna (radio) ,Microstrip ,law.invention - Abstract
This work presented the parametric studies work on the microstrip bow-tie patch antenna with split ring resonator structures. Firstly, a basic microstrip bow-tie patch antenna had been simulated using CST Microwave Studio. Then, the split ring resonator structure had been embedded to the patch part of the bow-tie antenna. Several parametric studies on the different dimension had been considered to investigate its return loss performance. These parametric studies done in these works are a different SRR distance from the center part, upper part and bottom part of the bow-tie patch, The return loss of the simulated and measurement of the antenna had been done. It shows that the return loss performance of this the basic bow-tie antenna is −20.16 dB at 2.404 GHz and −19.73 dB at 2.387 GHz for bow-tie antenna with SRR structure.
- Published
- 2015
36. Dual band printed folded dipole antenna for wireless communication at 2.4 GHz and 3.5 GHz applications
- Author
-
Badrul Hisham Ahmad and Hassan Nornikman
- Subjects
Physics ,Coaxial antenna ,business.industry ,Loop antenna ,Antenna measurement ,Electrical engineering ,Radiation pattern ,law.invention ,Microstrip antenna ,Optics ,law ,Dipole antenna ,Antenna (radio) ,business ,Monopole antenna - Abstract
This project discussed the performance result of the dual band printed folded dipole antenna for wireless communication system. This proposed been simulated using CST Microwave Studio simulation software. The folded dipole structures are implementing at both substrate surface of patch and ground plane. This technique will resonate at 2.4 GHz of frequency for WLAN application. A rhombic shaped are added to the front dipole to disturb the return loss and to introduce a new resonant frequency at 3.5 GHz for WiMAX application. The return loss of the proposed antenna shows return loss of −22.634 dB at 2.4 GHz of frequency with 3.36 dB of gain. At 3.5 GHz, the return loss is −10.380 dB with 4.417 dB of gain.
- Published
- 2015
37. Microstrip patch antenna with 12-N modified double W-shaped split ring resonator (MDW-SRR) structure
- Author
-
Hassan Nornikman, M. Z. A. Abd Aziz, and Badrul Hisham Ahmad
- Subjects
Physics ,Patch antenna ,Microstrip antenna ,Directional antenna ,law ,Acoustics ,Antenna measurement ,Return loss ,Electronic engineering ,Optical ring resonators ,Directivity ,law.invention ,Metamaterial antenna - Abstract
This paper investigated the effect of two main parameters of patch antenna by using partial ground techniques and addition of modified double W-shaped split ring resonator (MDW-SRR). The results show that these two techniques can be improving the performance of the return loss and bandwidth result of the patch antenna. The proposed antenna covers the frequency range of 1821.1 MHz to 3117.1 MHz with 1309.8 MHz of bandwidth compare to the normal antenna with only 33 MHz (2386 MHz to 2419.4 MHz). Firstly, the basic microstrip patch antenna design (Design A1) had been simulated in CST Microwave Studio simulation software. Secondly, the partial ground effect had been applied at the back of FR-4 substrate (Design A2). Then the Design B1, Design B2, Design B3 of four, eight and twelve units of modified double W-shaped split ring resonator (MDW-SRR) had been added into the patch antenna to compare its return loss, bandwidth, gain and directivity of the patch antenna.
- Published
- 2015
38. RUBBER TIRE DUST-RICE HUSK PYRAMIDAL MICROWAVE ABSORBER
- Author
-
Abdul Rani Othman, O. Nadiah, Ee Meng Cheng, Azremi Abdullah Al-Hadi, Mohd Nasir Taib, Mohd Fareq Abd Malek, Ping Jack Soh, M. Z. A. A. Aziz, Hassan Nornikman, Manjur Ahmed, and A. Hasnain
- Subjects
Absorption (acoustics) ,Radiation ,Materials science ,Anechoic chamber ,chemistry.chemical_element ,Condensed Matter Physics ,Husk ,law.invention ,chemistry ,Natural rubber ,law ,visual_art ,Shielded cable ,visual_art.visual_art_medium ,Radio frequency ,Electrical and Electronic Engineering ,Composite material ,Carbon ,Microwave - Abstract
Rubber tire dust-rice husk is an innovation in improving the design of pyramidal microwave absorbers to be used in radio frequency (RF) anechoic chambers. An RF anechoic chamber is a shielded room covered with absorbers to eliminate unwanted re∞ection signals. To design the pyramidal microwave absorber, rice husk will be added to rubber tire dust since the study shows that both have high percentages of carbon. This innovative material combination will be investigated to determine the best re∞ectivity or re∞ection loss performance of pyramidal microwave absorbers. Carbon is the most important element that must be in the absorber in order to help the absorption of unwanted microwave signals. In the commercial
- Published
- 2011
39. Co-planar Truncated Corner Patch Antenna with Fishbone-Shaped Slot Structure
- Author
-
K. A. Abd. Rashid, M. Z. A. Abd Aziz, M. M. Saad, Hassan Nornikman, and Mohd Nor Husain
- Subjects
Patch antenna ,History ,Materials science ,Planar ,Structure (category theory) ,Geometry ,Computer Science Applications ,Education - Published
- 2018
40. Dual Frequencies Band and Enhanced Wideband Effect of Dual Layer Microstrip Patch Antenna with Parasitic
- Author
-
M. Z. A. Abd Aziz, B. H. Ahmad, Hassan Nornikman, and H. A. Bakar
- Subjects
Microwave studio ,Physics ,History ,business.industry ,Bandwidth (signal processing) ,Dual layer ,Microstrip patch antenna ,Computer Science Applications ,Education ,Parasitic element ,Return loss ,Optoelectronics ,Wideband ,business ,Single layer - Abstract
In current telecommunication situation, the antenna with wideband or multi-band effect are important for cater many users' demands. In this research, the works explores the effect of parasitic element on the above of the dual layer microstrip patch antenna. Firstly, a basic microstrip patch antenna with a single layer of substrate (Design A) had been simulated using the CST Microwave Studio software. After that, the addition of another layer of substrate with parasitic element is shown as Design B. This proposed microstrip patch antenna resonates at two different frequencies of 2.396 GHz and at 2.543 GHz of frequency with - 36.8 dB and - 35.644 dB of return loss, respectively. The gain performance for both resonant frequencies at 2.396 GHz and at 2.543 is 5.035 dB and 4.814 dB, respectively. The bandwidth of the Design B antenna is 0.097 GHz (2.354 GHz - 2.451 GHz), had been increase compare with Design A performance of 0.039 GHz (2.380 GHz- 2.419 GHz). The second resonant frequency for Design B is only 0.028 GHz. (2.526 GHz- 2.554 GHz).
- Published
- 2018
41. PARAMETRIC STUDY OF PYRAMIDAL MICROWAVE ABSORBER USING RICE HUSK
- Author
-
F. H. Wee, Ping Jack Soh, Fareq Malek, A.A.H. Azremi, A. Hasnain, and Hassan Nornikman
- Subjects
Radiation ,Materials science ,Electrical and Electronic Engineering ,Composite material ,Condensed Matter Physics ,Husk ,Microwave absorber ,Parametric statistics - Published
- 2010
42. Design 2 × 2 patch array with L Slot Antenna for WiMAX and WLAN
- Author
-
Mohamad Kadim Suaidi, Adibah Azman, M. Z. A. Abd Aziz, Azahari Salleh, F. Malek, and Hassan Nornikman
- Subjects
Computer science ,Acoustics ,Slot antenna ,Antenna rotator ,Antenna tuner ,Radiation pattern ,law.invention ,Folded inverted conformal antenna ,Microstrip antenna ,Hardware_GENERAL ,law ,WokFi ,Dipole antenna ,Reflection coefficient ,Omnidirectional antenna ,Monopole antenna ,Patch antenna ,Directional antenna ,Coaxial antenna ,business.industry ,Reflective array antenna ,ComputerSystemsOrganization_COMPUTER-COMMUNICATIONNETWORKS ,Antenna measurement ,Antenna aperture ,Antenna factor ,WiMAX ,Antenna efficiency ,Antenna (radio) ,business ,Microwave ,Computer network - Abstract
A dual-band antenna by use 2 × 2 patch array with L-slot is presented for simultaneously worldwide interoperability for Microwave Access (WiMAX) and wireless local area network (WLAN) application. This 2 × 2 Patch Array with L Slot Antenna is targeted to achieve the gain more than 2 dB for both frequencies by using array technique design. The antenna design structure has been modified by adding a small double L-slot inside inverse double L-slot to obtain the second band resonant frequency at 3.6 GHz for WiMAX respectively. The proposed microstrip patch array antenna comprising of four L shape slot are designed to acceptable reflection coefficient that considered at S11 less than − 10 dB. According to the simulation and measurement result, the 10 dB reflection coefficient bandwidth is about 5.72 % and 7.3 % at both frequencies. The measured gain of the array is 3.65 at 2.4 GHz and 2.0 dB at 3.6 GHz. The agreement between simulation result and the measurement ones is good. The proposed antenna has increased the gain and reduces the reflection coefficient as well as increases the bandwidth of the antenna.
- Published
- 2015
43. Modified H-shaped patch antenna with slots and modified ground plane
- Author
-
M. Z. A. Abd Aziz, Hassan Nornikman, R. Razali, Mohamad Kadim Suaidi, and F. Malek
- Subjects
Computer science ,Acoustics ,Random wire antenna ,Slot antenna ,Antenna tuner ,Directivity ,law.invention ,Radiation pattern ,Folded inverted conformal antenna ,Microstrip antenna ,law ,J-pole antenna ,Dipole antenna ,Helical antenna ,Reflection coefficient ,Omnidirectional antenna ,Monopole antenna ,Ground plane ,Patch antenna ,Coaxial antenna ,Directional antenna ,business.industry ,Antenna measurement ,Antenna aperture ,Antenna factor ,WiMAX ,Antenna efficiency ,Antenna noise temperature ,Antenna (radio) ,Telecommunications ,business - Abstract
A design of modified H-shaped patch antenna with slots and modified ground plane is presented in this paper. H-patch configuration with modified ground plane is proposed to increase the directivity, bandwidth and reflection coefficient of antenna. The H-shape patch antenna is feed by transmission line. By giving extra slots on top of the patch, it can increase the reflection coefficient of antenna. Measurement results show that the antenna radiates at the frequency of 2.15 GHz with a bandwidth of 0.06 GHz. The resonant frequency of optimized antenna is 2.15 GHz, which has shifted about 30% from the WIMAX application frequency of 2.45 GHz. The minimum reflection coefficient found at frequency of 2.15 GHz is −23.66 dB. The gain of the antenna is achieved at 4.23 dB. The antenna is used to design by using CST Studio Suite 2014 software.
- Published
- 2015
44. CPW-FED compact monopole antenna for dual-band WLAN/ WiMAX applications
- Author
-
Mohamad Kadim Suaidi, F. Malek, Hassan Nornikman, Amelia Wong Azman, M. Z. A. Abd Aziz, and Azahari Salleh
- Subjects
Computer science ,Random wire antenna ,Magnetic monopole ,Slot antenna ,Radio spectrum ,law.invention ,Radiation pattern ,Microstrip antenna ,Optics ,law ,Feed line ,Helical antenna ,Dipole antenna ,Reflection coefficient ,Omnidirectional antenna ,Monopole antenna ,Directional antenna ,business.industry ,Coplanar waveguide ,Antenna measurement ,Antenna aperture ,Antenna factor ,WiMAX ,Antenna efficiency ,Horn antenna ,Electrical length ,Antenna gain ,Antenna (radio) ,business ,Telecommunications - Abstract
This paper has presents a novel design of compact monopole antenna fed by a coplanar waveguide (CPW) for dual-band applications that targeted to achieve the gain more than 1 dB. The proposed compact monopole antenna has been design only 20 × 35 mm in size. The monopole structure with two inverted U-shaped, L-shaped lateral and coplanar-way (CPW) feed line driven by 50 Ω on one side are designed with reflection coefficient that |s11| less than −10 dB. The U-shaped patch and patch laterally inverted L-shaped have been applied to generate different frequency bands 2.4 GHz and 5.2 GHz by controlling the parameter. According to the simulation and measurement result, the reflection coefficient bandwidth is about 8 – 16.51 % at both frequencies. The measured gain of the monopole is 1.18 dB at 2.4 GHz and 1.45 dB at 5.2 GHz. The proposed antenna has increased the gain and reduces the reflection coefficient as well as increases the bandwidth of the antenna
- Published
- 2015
45. Broadband Circular Polarization Antenna Based on Inverted Suspended Circular Patch with Square Slot.
- Author
-
Bakar, Hamizan Abu, Bin Abd. Aziz, Mohamad Zoinol Abidin, Ahmad, Badrul Hisham, and Hassan, Nornikman
- Published
- 2017
- Full Text
- View/download PDF
46. Fork-like shaped monopole antenna with defected parasitic elements and ring slots
- Author
-
B. I. Asadingo, Mohd Azlishah Othman, Badrul Hisham Ahmad, M. Z. A. Abd Aziz, Mohamad Hafize Ramli, and Hassan Nornikman
- Subjects
Physics ,Patch antenna ,Microstrip antenna ,Optics ,Coaxial antenna ,Quad antenna ,business.industry ,J-pole antenna ,Electronic engineering ,Slot antenna ,business ,Monopole antenna ,Radiation pattern - Abstract
This work investigate the effect of the defected parasitic element and ring slot on the ground plane at the fork-like shape monopole antenna. Firstly, the basic fork-like shape antenna with a slot and parasitic patch had been designed in the CST Microwave Studio. Then, this antenna had been improved by embedded some defected structure in stage by stage at the ground plane - Design B, Design C, and Design D. The structure had been apply is the parasitic patch and ring slot. The optimal result of this dual-band antenna for Design D is 2.45 GHz and 5.22 GHz with a gain of 4.043 dB and 3.496 dB and the return loss of − 34.875 dB and − 18.03 dB. The target application for this antenna is at 2.45 GHz and 5.2 GHz of the frequency band.
- Published
- 2014
47. Design of a broadband circular polarized antenna
- Author
-
Badrul Hisham Ahmad, Kho Shin Phoo, Hassan Nornikman, M. Z. A. Abd Aziz, Mohd Azlishah Othman, F. Abd. Malek, and M. K. Suaidi
- Subjects
Patch antenna ,Engineering ,Coaxial antenna ,business.industry ,ComputerSystemsOrganization_COMPUTER-COMMUNICATIONNETWORKS ,Antenna measurement ,Astrophysics::Instrumentation and Methods for Astrophysics ,Turnstile antenna ,Antenna factor ,Antenna efficiency ,Microstrip antenna ,Optics ,ComputerApplications_MISCELLANEOUS ,business ,Monopole antenna ,Computer Science::Information Theory - Abstract
In this paper, a broadband circular polarized antenna with operating frequency at 2.4GHz is proposed. The antennas are designed by using L-probe amendment with inverted patch by using suspended rectangular microstrip antenna (MSA) technique to improve the bandwidth until more than 200MHz. The characteristics of the antenna are analyzed, so that the antenna meets broadband operations at operating frequency of 2.4GHz with return loss less than -10dB. The broadband circular polarized antenna had been designed and simulated by using Computer Simulation Technology (CST) software.
- Published
- 2014
48. Fractal microstrip antenna with Minkowski Island split ring resonator for broadband application
- Author
-
Hassan Nornikman and Badrul Hisham Ahmad
- Subjects
Physics ,Patch antenna ,Directional antenna ,business.industry ,Antenna measurement ,Astrophysics::Instrumentation and Methods for Astrophysics ,Slot antenna ,Fractal antenna ,Biconical antenna ,Microstrip antenna ,Optics ,Electrical length ,business ,Computer Science::Information Theory - Abstract
A fractal microstrip antenna with Minkowski Island split ring resonator (MI-SRR) is proposed in this paper. Four minis MI-SRR structure had been connected to the corner of the main Minkowski Island Fractal to improve the bandwidth of the antenna. This antenna radiates at the broadband range from 2.09 GHz to 3.64 GHz with a bandwidth of 1.55 GHz. The first resonant frequencies for this antenna are at 2.292 GHz with - 14.515 dB of return loss while the second resonant frequency is at 3.428 GHz with - 28.585 dB. Design A and Design B have compared its return loss, resonant frequency, gain and bandwidth performance with the previous Minkowski Island antenna. The simulation work in CST Microwave Studio simulation software also had been compared with the measured fractal microstrip antenna.
- Published
- 2013
49. Dual layer rectangular microstrip patch antenna with H-slot for 2.4 GHz range applications
- Author
-
M. Md Shukor, N. A. Zainuddin, Norshafinash Saudin, F. Malek, M. Z. A. Abd Aziz, Badrul Hisham Ahmad, Mohd Azlishah Othman, and Hassan Nornikman
- Subjects
Patch antenna ,Microstrip antenna ,Optics ,Materials science ,Coaxial antenna ,business.industry ,Antenna measurement ,Electrical engineering ,Antenna factor ,Antenna gain ,business ,Antenna efficiency ,Radiation pattern - Abstract
In this work, a dual layer rectangular microstrip patch antenna with H-slot is proposed for improving the return loss and enhanced gain at 2.4 GHz and 2.45 GHz. The antenna is designed by using CST Microwave Studio is used to design the mathematically based on the rectangular microstrip patch antenna. Simulated and experimental results obtained for this antenna show that it exhibits good radiation behavior within the RFID frequency range. It is found that this antenna shows - 18.584 dB at 2.45 GHz and - 19.692 dB at the resonant frequency of 2.442 GHz. At desired along this frequency band, the gain 2.228 dB at 2.442 GHz and 2.756 dB at 2.45 GHz is achieved.
- Published
- 2013
50. Meandered dipole Yagi-Uda antenna with parabolic reflectors for Global Positioning System (GPS) applications
- Author
-
M.S. Zulkefli, H. M. Mat, M. F. Abd Malek, F. Malek, Badrul Hisham Ahmad, M. Z. A. Abd Aziz, and Hassan Nornikman
- Subjects
Physics ,Coaxial antenna ,business.industry ,Antenna measurement ,Astrophysics::Instrumentation and Methods for Astrophysics ,Antenna factor ,Antenna efficiency ,law.invention ,Periscope antenna ,Optics ,law ,Dipole antenna ,Antenna (radio) ,business ,Monopole antenna ,Computer Science::Information Theory - Abstract
A meandered dipole Yagi-Uda antenna with parabolic reflector for 1.575 GHz of the Global Positioning System (GPS) application is presented. The intention of this work is to attain the consequence for optimum presentations of the antenna established to gain, size and directivity. This antenna radiates at the frequency between 1.52 GHz and 1.88 GHz. The gain for this antenna is 4.521 dB at 1.575 GHz of frequency. This antenna had been shown in the simulation of CST Microwave Studio and compared with the measured antenna results.
- Published
- 2013
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.