Search

Simultaneously achieving improvements in power conversion efficiency (PCE) and stability is the main task of the current development stage of organic solar cells (OSCs). This work reports a symmetry–asymmetry dual‐acceptor (SADA) strategy to construct ternary devices, which is found to be feasible for increasing both the PCE and the operational lifetime of OSCs. In this contribution, the symmetric acceptor L8‐BO and the asymmetric acceptor BTP‐S9 are blended in equal proportions with polymer donor PM6 for the consideration of absorption spectrum complementarity and cascade energetic alignment. In addition, the features of crystallinity and miscibility of the dual‐acceptor deliver optimized morphology lead to a high PCE of 18.84%. In addition, the asymmetric acceptor BTP‐S9 with a larger dipole moment shows tighter molecular stacking and longer crystal correlation length, which favor intrinsic molecular photostability, and further consolidate the operational lifetime of OSCs when coordinated with L8‐BO. This work demonstrates the efficacy of the SADA strategy for constructing efficient and stable OSCs. [ABSTRACT FROM AUTHOR]

Balancing the charge generation and recombination constitutes a major challenge to break the current limit of organic photovoltaics (OPVs). To address this issue, an asymmetric non‐fullerene acceptor, namely the AC9, is developed and high‐performance OPV with a champion efficiency of 18.43% (18.1% certified) is demonstrated. This represents the record value among binary OPVs. Comprehensive analysis on exciton dissociation, charge collection, carrier transport, and recombination has been carried out, unveiling that the improved device performance of asymmetric AC9‐based OPVs is originated from a better compromise between charge generation and non‐radiative charge recombination, compared with the corresponding symmetric ones. This work provides a high‐performing molecule and paves the way for high‐performance OPVs through asymmetric molecular design. [ABSTRACT FROM AUTHOR]

Semi‐transparent organic photovoltaics (ST‐OPVs) are promising solar windows for building integration. Improving the light‐absorbing selectivity, that is, transmitting the visible photons while absorbing the invisible ones, is a key step toward high‐performance ST‐OPV. To achieve this goal, the optical properties of the active layer, transparent electrode, and capping layer are comprehensively tailored, and a highly efficient ST‐OPV with good absorbing selectivity is demonstrated. First, a numerical method is established to quantify the absorbing selectivity of materials and devices, based on which, an infrared absorbing non‐fullerene acceptor, that is, H3, is selected among a large pool of photo‐active materials. Second, an ultra‐smooth transparent thin Ag layer with small granule size is developed via polyethylenimine wetting, which alleviates light scattering and improves the electric properties for ST‐OPV. Finally, as guided by optical simulation, a TeO2 capping layer is deposited on top of the ultra‐thin Ag to further improve the light‐absorbing selectivity. As a result, the light utilization efficiency is significantly improved to 3.95 ± 0.02% (best ≈4.06%), with a good color rendering index of 76.85. These results make it one of the best among color‐neutral ST‐OPVs. This work stresses the importance of manipulating the light‐absorbing selectivity for high‐performance ST‐OPVs. [ABSTRACT FROM AUTHOR]

[Display omitted] • Investigations on non-fused-ring acceptors with progressive evolutions. • Counterbalance between high photo-response and low energy loss. • J52:O-PC-EH-based device achieved a best efficiency of 14.43% (certified: 14.1%). Resolving competitive counterbalance between high external quantum efficiency (EQE) response and low energy loss is critical for achieving efficient organic solar cells (OSCs), including those based on low-cost non-fused-ring electron acceptor (NFREA). In this work, we performed a comparable study by utilizing four NFREAs with progressive evolutions in molecular structures, energetic levels, spectral coverages, crystallinity, etc, to pair with polymer donor J52. By regulating the terminal and side chains of NFREAs, the enhanced intramolecular charge transfer (ICT) effect allows O-PC-EH possessing the broader spectral coverage for higher photocurrent, the reduced energetic offset enables O-PC-EH-based device owning higher luminescence property for lower energy loss, the strengthened crystallinity endows O-PC-EH-based blend better charge transport property for less charge recombination. With those comprehensive managements from molecule to blend properties, the J52:O-PC-EH-based OSCs achieved the best efficiency of 14.4% (certified: 14.1%) with benefits in all the three device parameters. This work reveals the importance of fine-tuning molecular structures of NFREAs according to paired polymer donor for maximizing the device performances. [ABSTRACT FROM AUTHOR]

Highlights: A solid additive-assisted layer-by-layer (SAA-LBL) processing was developed to facilitate the inter-diffusion between polymer donor and acceptor and optimize the morphology of quasi-planar heterojunction for high-performance organic solar cells (OSCs). The pre-phase separation between fatty acid and polymer donor, easily tuned via controlling the cohesive energy, is critical to form the desired vertical phase-separation morphology. The SAA-LBL is generally applicable to various OSC systems, and enables the record efficiency of 19.02% among the binary OSCs. Morphology is of great significance to the performance of organic solar cells (OSCs), since appropriate morphology could not only promote the exciton dissociation, but also reduce the charge recombination. In this work, we have developed a solid additive-assisted layer-by-layer (SAA-LBL) processing to fabricate high-efficiency OSCs. By adding the solid additive of fatty acid (FA) into polymer donor PM6 solution, controllable pre-phase separation forms between PM6 and FA. This intermixed morphology facilitates the diffusion of acceptor Y6 into the donor PM6 during the LBL processing, due to the good miscibility and fast-solvation of the FA with chloroform solution dripping. Interestingly, this results in the desired morphology with refined phase-separated domain and vertical phase-separation structure to better balance the charge transport /collection and exciton dissociation. Consequently, the binary single junction OSCs based on PM6:Y6 blend reach champion power conversion efficiency (PCE) of 18.16% with SAA-LBL processing, which can be generally applicable to diverse systems, e.g., the PM6:L8-BO-based devices and thick-film devices. The efficacy of SAA-LBL is confirmed in binary OSCs based on PM6:L8-BO, where record PCEs of 19.02% and 16.44% are realized for devices with 100 and 250 nm active layers, respectively. The work provides a simple but effective way to control the morphology for high-efficiency OSCs and demonstrates the SAA-LBL processing a promising methodology for boosting the industrial manufacturing of OSCs. [ABSTRACT FROM AUTHOR]

Ternary strategy, adding an additional donor (D) or acceptor (A) into conventional binary D:A blend, has shown great potential in improving photovoltaic performances of organic photovoltaics (OPVs) for practical applications. Herein, this review is presented on how efficient ternary OPVs are realized from the aspects of morphology, energy loss, and working mechanism. As to morphology, the role of third component on the formation of preferred alloy‐like‐phase and vertical‐phase, which are driven by the miscibility tuning, is discussed. For energy loss, the effect of the third component on the luminescence enhancement and energetic disordering suppression, which lead to favorable increase of voltage, is presented. Regarding working mechanism, dilution effect and relationships between two acceptors or donor/acceptor, which explain the observed device parameters variations, are analyzed. Finally, some future directions concerning ternary OPVs are pointed out. Therefore, this review can provide a comprehensive understanding of working principles and effective routes for high‐efficiency ternary systems, advancing the commercialization of OPVs. [ABSTRACT FROM AUTHOR]

Large energy loss is one of the main limiting factors for power conversion efficiencies (PCEs) of organic solar cells (OSCs). To this effect, the chemical modifications of the famous Y‐series nonfullerene acceptor (NFA) BTP‐4Cl‐BO with a new end group, TPC‐Cl, whose π‐conjugation is extended through the fusing of 3‐(dicyanomethylene)indanone (IC) group with a chlorinated thiophene ring, to synthesize two novel NFAs, BTP‐T‐2Cl and BTP‐T‐3Cl are performed. For BTP‐T‐2Cl with two TPC‐Cl groups, the resulting OSC exhibits a modest PCE of 14.89% but an extraordinary low energy loss of 0.49 eV, because its superior electroluminescence quantum efficiency of 0.0606% mitigates significantly the nonradiative loss (0.191 eV). For BTP‐T‐3Cl with one TPC‐Cl group, the corresponding device shows a higher PCE of 17.61% accompanied by a slightly bigger energy loss of 0.51 eV, which can be ascribed to the optimized morphology and/or efficient charge generation. Furthermore, the ternary OSC adopting two NFAs of BTP‐T‐3Cl and BTP‐4Cl‐BO achieves an impressive PCE of 18.21% (certified value of 17.9%), which is among the highest values for OSCs to date. The above results demonstrate that expanding end groups of NFAs with electron‐donating rings is an effective strategy to realize lower energy losses for OSCs. [ABSTRACT FROM AUTHOR]

In this paper, the rectangular ultra-high performance concrete filled steel tube (UHPCFST) specimen columns are tested under combined axial compression and cyclic lateral loading to investigate the seismic performance. The parameters of the steel tube thickness, axial compression ratio and sectional height-width ratio are considered. The test results indicate that the plastic deformation and the cumulative damage are mainly concentrated at column's foot, the failure of the UHPCFST column demonstrates a compression-flexure failure mode. The UHPCFST specimen columns exhibit favourable deformation capacity and energy dissipation ability, and the ultimate drift ratio is within the range of 5.8%–9.8%. Using thick-walled steel tube can delay the stiffness degradation and strength degradation of UHPCFST columns, the reinforcing effect on the core UHPC provided by steel tube becomes strong after the drift ratio exceeds 4%, the vertical strain distribution of steel tube along the height of cross section basically complies with the plain section assumption. In addition, a FE model is estabilished by OpenSees to conduct parametrical analysis. Furthermore, the tested moment bearing capacities of UHPCFST columns are compared with the N - M interaction curves based on current AISC-LRFD, EC4 and AIJ code provisions to evaluate their applicability for UHPCFST columns. [ABSTRACT FROM AUTHOR]