Search

The stability of marginal bone level is an important factor in ensuring long-term good clinical efficacy of implantation. The design of implant-abutment interface(IAI)is of considerable importance,including whether undergoing multiple abutment disconnection, whether platform switching is used, connection type, connection torque, and connection material differences. These factors can affect the micro gap and micro movement of the connection interface, which change the size of micro leakage and mechanical stability, thereby affecting the long-term clinical efficacy of implants. This article presents a detailed review of the progress of research on different designs in implant-abutment interface, in order to provide a theoretical basis for the selection and operation of abutments in clinical diagnosis and treatment.

Due to advances in digital technology, intraoral impressions have been increasingly used to fabricate implant restorations because of its simplicity, high efficiency, comfortableness and convenience. In clinical practice, the accuracy of intraoral impressions depends on various factors, including scanner technique, status of dentition and implants, auxiliary devices, materials and environment, which might influence its accuracy and limit its application. When applied to patients missing more teeth, its accuracy may be insufficient. It is suggested that intraoral impressions be used cautiously when there are multiple and far apart implants and that the scan body not be tightened excessively and that maintain appropriate environmental conditions. In this article, we have reviewed recent relevant literature and the factors affecting the accuracy of intraoral impressions for implant restoration

Artificial intelligence represented by deep learning has attracted attention in the field of dental implant restoration. It is widely used in surgical image analysis, implant plan design, prosthesis shape design, and prognosis judgment. This article mainly describes the research progress of deep learning in the whole process of dental implant prosthodontics. It analyzes the limitations of current research, and looks forward to the future development direction. [ABSTRACT FROM AUTHOR]

Strain YJY-8, a new γ-polyglutamic acid producer, was separated from fermented soybean paste samples. The strain was identified as a genus of Bacillus by morphological and 16S rDNA sequence analysis and was named Bacillus sp. YJY-8. The optimal medium composition and cultural conditions were studied using a single-factor experiment and a response surface experiment. The optimized medium consisted of monosodium glutamate 70 g/L, glucose 54.3 g/L, glycerol 31.8 g/L, ammonium sulfate 11.1 g/L, yeast extract 3.2 g/L, tryptone 1.5 g/L, L-glutamic acid 6.8 g/L, MgSO4 7H2O 0.5 g/L, FeCl3 6H2O 0.02 g/L, KH2PO4 0.9 g/L, CaCl2 0.03 g/L, MnSO4 H2O 0.3 g/L, ammonium molybdate 0.02 g/L, pH 7.0. The optimal cultivation conditions were 35 °C and pH 7.0. Under the optimized conditions, after 48 hr of cultivation, the highest shaking flask fermentation level of γ-PGA reached 65.2 ± 0.36 g/L. In addition, through fed-batch fermentation in 30 L fermenters, the fermentation level of γ-PGA reached its highest level at 88.42 g/L and productivity was 1.23 g/(L hr) after 72 hr. Then, the effect of γ-PGA on tomato yield was investigated. At the seedling stage, the plant height and stem diameter of γ-PGA treated plants increased by 5.69 and 15.735% after spraying γ-PGA for 19 days. During the flowering and fruiting period, the stem diameter of the γ-PGA treatment group increased by 6.74%, with a maximum increase of 11.65%. The number of fruit branches increased by 0.56–16.29% and the number of fruit sets increased by 1.01–28.47%. At the fruit maturation stage, the yield of tomatoes increased by 10.51, 14.27, and 5.83%. [ABSTRACT FROM AUTHOR]

Objectives: To determine the optimal current and time of electrolytic cleaning (EC), compare its biofilm removal effect with generic treatments and evaluate the influence of EC to surface characteristics and osteogenic potential of SLA titanium (Ti) discs. Materials and Methods: The six‐species biofilm‐covered Ti discs were placed as cathodes in physiologic saline and subjected to various current and time treatments. The residual biofilms were evaluated to determine the optimal parameters. The contaminated Ti discs were randomized and treated by rotating Ti brush; ultrasonic‐scaling with metal tips; ultrasonic‐scaling with PEEK tips; air‐polishing and EC. The residual biofilms were compared using a lipopolysaccharide kit (LPS), scanning electron microscope (SEM), confocal laser scanning microscopy and colony‐forming unit counting. Non‐contaminated Ti discs were treated and characterized. The bone marrow mesenchymal stem cells (BMSCs) were cultured on treated non‐contaminated Ti discs. The adhesion, proliferation, alkaline phosphatase (ALP) activity and osteocalcin level of BMSCs were assessed. Results: The parameters at 0.6A5min were considered optimal. For LPS and SEM, EC promoted a significantly greater biofilm removal than the other groups. There were no changes in the Ti discs' colour, topography, roughness and chemical elements after EC, and the electrolysis‐treated Ti discs obtained a super‐hydrophilic surface. EC positively impacted the proliferation and ALP activity of BMSCs, surpassing the efficacy of alternative treatments. Conclusions: EC achieves a near‐complete eradication of contaminants on the SLA surface, causes no surface damage with improved hydrophilicity, and promotes the early osteogenic response of BMSCs, which makes it a promising treatment for peri‐implantitis. [ABSTRACT FROM AUTHOR]

Severe erosion wear is found on valve spools, which threatens the safety and reliability of these units. The use of the plasma beam spraying surfacing method can significantly improve the corrosion resistance and sealing performance of hydraulic valve spools, reduce material waste, and reduce maintenance costs. The effects of the co-addition of CeO2 and SiC particles on the morphology, surface cracks, microstructure, precipitated phases, and wear property of plasma-beam-sprayed Fe55-based coatings on 1025 steel were investigated using OM, EDS, ultra-deep field microscopy, and a wet sand rubber wheel friction tester, respectively. The dendrite exhibited a directional growth pattern perpendicular to the substrate and the transitional states of the microstructure with the co-addition of CeO2 and SiC particles. CeO2 or SiC reduced the liquid phase diffusion coefficient DL of Cr and C and resulted in a decrease in the G/R ratio. The dendrites changed into equiaxed grains. The main phase composition of the Fe55 welding layer was Cr7C3, γ-Fe. The martensite in the surfacing layer and the carbides formed Cr7C3, which can improve the hardness of the surfacing layer. The grain boundaries consisted mainly of a reticular eutectic structure. The uniform distribution of the Cr7C3 hard phase in the Fe55+1.5 wt% SiC+0.01 wt% CeO2 resulted in a uniformly worn surface. The sub-wear mechanisms during the friction process were micro-ploughing and micro-cutting. The hardness and toughness of Fe55+1.5 wt% SiC+0.01 wt% CeO2 were well-matched, avoiding excessive micro-cutting and microplastic deformation. A low content of CeO2 could lead to the formation of equiaxed grain and effectively improve the uniformity of the microstructure. The wear-resistant layer of Fe55+1.5 wt% SiC+0.01 wt% CeO2 can effectively improve the service life and long-term sealing performance of the valve spools. [ABSTRACT FROM AUTHOR]

This study aimed to compare the effect of a bioceramic sealer (iRoot SP) and a resin‐based sealer (AH Plus) on the outcome of root canal treatment in a 2‐year follow‐up. Seventy‐six teeth with irreversibly or necrotic pulp were recruited. After instrumentation and disinfection, the root canals were obturated using warm vertical compaction with iRoot SP (n = 43) or AH Plus (n = 33). Patients were followed up by clinical and radiographic examination at 6 12 and 24 months with recall rates of 84.2%, 65.8% and 48.7%, respectively. During each recall session, the success rates were 80%, 85.2% and 85% in the iRoot SP group and 82.8%, 91.3% and 88.2% in the AH Plus group. The success rates of the two groups did not differ significantly (p > 0.05). The bioceramic sealer resulted in a similar clinical performance and success rate to the resin‐based sealer in endodontic treatment during a 2‐year follow‐up. [ABSTRACT FROM AUTHOR]