Search

Through an isolated-ligand strategy, the obtained multivariate MOF ZJU-235–BTDD0.02 exhibits a quantum yield of up to 80.92%, which is much higher than that of ZJU-236 constructed only from H2BTDD.

The manipulation on turn-on fluorescence in solid state materials attracts increasing interests owing to their widespread applications. Herein we report how the nonradiative pathways of tetraphenylpyrazine (TPP) units in metal−organic frameworks (MOFs) systems could be hindered through a topological design approach. Two MOFs single crystals of different topology were constructed via the solvothermal reaction of a TPP-based 4,4 ′ ,4 ″ ,4 ‴ -(pyrazine-2,3,5,6-tetrayl) tetrabenzoic acid (H 4 TCPP) ligand and metal cations, and their mechanisms of formation have been explored. Compared with the innate low-frequency vibrational modes of flu net Tb-TCPP-1, such as phenyl ring torsions and pyrazine twists, Tb-TCPP-2 adopts a shp net, so the dihedral angle of pyrazine ring and phenyl arms is larger, and the center pyrazine ring in TPP unit is coplanar, which hinders the radiationless decay of TPP moieties in Tb-TCPP-2. Thereby Tb-TCPP-2 exhibits a larger blue-shifted fluorescence and a higher fluorescence quantum yield than Tb-TCPP-1, which is consistent with the reduced nonradiative pathways. Furthermore, Density functional theory (DFT) studies also confirmed aforementioned tunable turn-on fluorescence mechanism. Our work constructed TPP-type MOFs based on a deliberately topological design approach, and the precise design of turn-on fluorescence holds promise as a strategy for controlling nonradiative pathways.

Herein, we developed a strategy of rational constructing bimetallic metal–organic frameworks (MOFs) and at the same time embedding charges on backbones. Based on the Pearson’s hard/soft acid/base (...

Hypochlorite (ClO-) is widely used as a disinfectant, whose residue content in water should be strictly controlled due to the potential threat to human health in an inappropriate concentration. Herein, dual-emissive metal-organic frameworks with a UiO-66 prototype structure, PDA/Eu/PDA-UiO-66-NH2(x), were elegantly designed and prepared by a mixed ligand assembly and sequential post-synthesis strategy. Since blue emission is sensitive to ClO-, PDA/Eu/PDA-UiO-66-NH2(40) was selected as a model nanosensor for ratiometric and turn-on sensing of ClO- while red emission acts as a reference signal. Remarkably, PDA/Eu/PDA-UiO-66-NH2(40) shows high efficiency and specificity toward ClO- detection, as verified by a very short response time of 15 s, a wide linear range of 0.1-60 μM, a low detection limit of 0.10 μM, and excellent selectivity toward common competing ions. The recovery experiments show that the recoveries of spiking ClO- in tap water range from 96 to 103%. The rigidification of the coordinated H2N-BDC2- ligands should be responsible for the turn-on fluorescence of PDA/Eu/PDA-UiO-66-NH2(40). This work not only shows a highly efficient and specific fluorescent nanosensor for ClO- detection but also presents the first MOF-based fluorescent probe for turn-on and ratiometric sensing of ClO-.

It is mandatory to decontaminate Cr(VI) species from water streams due to their high toxicity. The photoreduction of hazardous Cr(VI) to nontoxic Cr(III) is a very promising approach to control Cr(VI) pollution. Although some MOFs and their composites have been employed as photocatalysts to reduce toxic Cr(VI), their catalytic activities are always limited by inefficient visible light absorption and inferior Cr(VI) adsorption performances. Herein, cationic Ru-UiO-dmbpy(1) that is decorated with a high density of cationic charges and also embedded with catalytically competent and visible light harvesting moieties (i.e. Ru(bpy)3) was successfully synthesized by a sequential mix-and-match and ionization process. The presence of Ru(bpy)3 moieties makes Ru-UiO-dmbpy(1) an excellent visible-light harvester, extending the absorption edge from 420 nm for pristine UiO-bpy to about 780 nm for Ru-UiO-bpy/Ru-UiO-dmbpy(1). Driven by ion exchange, Ru-UiO-dmbpy(1) shows a large adsorption rate constant (k2) of 1.33 × 10−2 g mg−1 min−1 in the adsorption of Cr2O72−, which is 8.26 times that of pristine UiO-bpy and 6.27 times that of the non-ionization counterpart Ru-UiO-bpy(1) under the same adsorption conditions. The equilibrium Cr2O72− uptake capacity of Ru-UiO-dmbpy(1) reaches 101.8 mg g−1, which is about 1.98 and 1.81 times that of UiO-bpy and Ru-UiO-bpy(1), respectively. With an efficient visible light absorption ability and superior Cr(VI) adsorption performance, Ru-UiO-dmbpy(1) shows a reaction rate constant (k1) of 0.011 min−1 in the photoreduction of Cr(VI) without any sacrificial agents under visible light illumination, which is much larger than those of pristine UiO-bpy (0.003 min−1) and its non-ionization counterpart Ru-UiO-bpy(1) (0.007 min−1) under the same conditions. The result unambiguously demonstrates that the Cr(VI) photoreduction activity could be largely enhanced by photosensitiser introduction and framework ionization. To further evaluate the catalytic performance of Ru-UiO-dmbpy(1), Cr(VI) reduction was also investigated in the presence of various sacrificial agents. Remarkably, a high Cr(VI) photoreduction rate of 6.4 mgCr(VI) gcatalyst−1 min−1 was obtained when benzyl alcohol was used as a sacrificial agent, which is a record value among those reported for MOF-based photocatalysts.

The restriction of sulfur content in fuels has become increasingly stringent as a result of the growing environmental concerns. Although several MOF-derived materials like POM@MOF composites have shown the ability to catalyze oxidative desulfurization (ODS), their catalytic activities inevitably obstructed by the encapsulated catalytic sites like POM due to the blockage of cavities. Therefore, MOFs with intrinsic and accessible catalytic sites are highly desirable for their applications in ultradeep ODS. Herein, four representative Zr-based MOFs (Zr-MOFs), namely, UiO-66, UiO-67, NU-1000, and MOF-808, were assessed for catalytic ODS. These MOFs were confirmed that they have peroxidase-like activity and can catalyze ODS with H2O2 as oxidant. Among them, MOF-808 showed the highest catalytic activity and it can fully desulfurize dibenzothiophene (DBT) in a model gasoline with a S concentration of 1000 ppm under 40 °C within 5 min. An extremely low apparent Arrhenius activation energy (22.0 KJ·mol-1) and an extraordinarily high TOF value (42.7 h-1) were obtained, ranking MOF-808 among the best catalysts for the catalytic DBT oxidation. Further studies confirmed that the excellent catalytic activity is mainly responsible for the high concentration of the accessible Zr-OH(H2O) catalytic sites decorated in MOF-808. The superoxide radicals (•O2-) and hydroxyl radicals (•OH) were identified and were proved to involve in the DBT oxidation. Besides, the effects of Bronsted and lewis acidity to the catalytic efficiency were also discussed. Based on the experimental results, a plausible mechanism concerning on Zr-OH(H2O) groups promoting the H2O2 decomposion in to both •O2- and •OH was first proposed. Moreover, MOF-808 can be facilely reused for at least eight runs without significant loss of its catalytic activity. By the integration of facile synthesis, high catalytic efficiency, and good stability, MOF-808 thus represents a new benchmark catalyst for catalytic oxidative desulfurization.

Natural enzyme mimetics with high catalytic activity at nearly neutral pH values are highly desired for their applications in biological systems. Herein for the first time a stable MOF, namely MOF-808, has been shown to possess high intrinsic peroxidase-like catalytic activity under acidic, neutral, and alkaline conditions. As a novel peroxidase mimetic, MOF-808 can effectively catalyze the oxidation of 3,3′,5,5′-tetramethylbenzidine when H2O2 serves as oxidant, accompanied by a significant color variation in the solution. The catalytic activity and the color variation were greatly dependent on H2O2 concentration, and thus MOF-808 can be applied to the colorimetric sensing of H2O2. The H2O2 detection limit is 4.5 μM, and the linear range is 10 μM to 15 mM. In view of the significant inhibition effect produced by ascorbic acid, a facile and sensitive approach for colorimetric sensing of ascorbic acid was successfully established. The AA detection limit is 15 μM, and the linear range is 30–1030 μM. Further ...

Highly efficient decontamination of heavily toxic Cr2O72– from water remains a serious task for public health and ecosystem protection. An easily regenerative and reused sorbent with suitable porosity may address this task. Herein, a series of water-stable and ecofriendly metal–organic frameworks (MOFs) with large surface areas were assessed for their ability to adsorb and separate Cr2O72– from aqueous solutions. Among these tested MOFs, NU-1000 shows an extraordinary capability to efficiently capture (within 3 min) Cr2O72– with a sorption capacity of up to 76.8 mg/g, which is the largest one for the neutral MOF-based Cr2O72– sorbents. NU-1000 also shows remarkable selectivity for Cr2O72– capture and can effectively reduce the Cr(VI) concentration from 24 ppm to 60 ppb, which is below the acceptable limit for the drinking water standard (100 ppb by the U.S. Environmental Protection Agency). Moreover, this adsorbent can be easily regenerated by Soxhlet extraction with an acidic methanol solution (2.5 M HCl...

The detection of hypochlorite (ClO-) content in tap water is extremely important because excess amounts of hypochlorite can convert into highly toxic species and inadequate amounts of hypochlorite cannot fully kill bacteria and viruses. Although several metal-organic frameworks (MOFs) have been successfully employed as fluorescent sensors for hypochlorite detection, all these sensors are based on single emission that responds to the dose of hypochlorite. Ratiometric sensors are highly desirable, which can improve the sensitivity, accuracy, and reliability via self-calibration. Herein, a nanoscale dual-emission multivariate 5-5-Eu/BPyDC@MOF-253-NH2 was synthesized by sequential mixed-ligand self-assembly and postsynthesis method. Among the two emission bands of 5-5-Eu/BPyDC@MOF-253-NH2, the strong blue emitting derived from ligands is sensitive to hypochlorite, while the red emitting derived from Eu(III) almost keeps invariable. Therefore, 5-5-Eu/BPyDC@MOF-253-NH2 was exploited as a fluorescent ratiometric nanosensor for "on-off" sensing of hypochlorite. Notably, the proposed sensing system showed an excellent performance including fast response (within 15 s), relative high specificity, wide linear range (0.1-30 μM), and low detection limit (0.094 μM). Besides, the suppressed blue emitting was recovered after the addition of ascorbic acid (AA) that consumes ClO- via the redox reaction. Therefore, 5-5-Eu/BPyDC@MOF-253-NH2 was further employed as a fluorescent ratiometric nanosensor for the "on-off-on" sensing of AA. This work represents the first MOF-based fluorescent "switch" for the ratiometric sensing of hypochlorite and the second for ratiometric sensing of AA.

The restriction of sulfur content in fuels has become increasingly stringent as a result of the growing environmental concerns. Although several MOF-derived materials like POM@MOF composites have shown the ability to catalyze oxidative desulfurization (ODS), their catalytic activities inevitably obstructed by the encapsulated catalytic sites like POM due to the blockage of cavities. Therefore, MOFs with intrinsic and accessible catalytic sites are highly desirable for their applications in ultradeep ODS. Herein, four representative Zr-based MOFs (Zr-MOFs), namely, UiO-66, UiO-67, NU-1000, and MOF-808, were assessed for catalytic ODS. These MOFs were confirmed that they have peroxidase-like activity and can catalyze ODS with H

A novel glycoluril scaffold 1, namely 1,6-(1,2-xylylene)-3,4-(1,3-dimetheneyl-hexahydropyrimidine)tetrahydroimidazo[4,5-d]imidazole-2,5(1H,3H)-dione, was synthesized by the Mannich reaction of 1,6-(1,2-xylylene)tetrahydroimidazo[4,5-d]imidazole-2,5(1H,3H)-dione 5 with propanediamine and paraformaldehyde. The yielded product 1 was confirmed with IR, NMR, EI-MS. X-ray crystallographic technique was also conducted and the result showed the crystal belongs to monoclinic system, space group P21/c with unit cell parameters a = 10.6892(11) A, b = 12.1226(9) A, c = 13.7822(13) A, α = 90°, β = 112.620(4)°,γ = 90°, V = 1648.5(3) A3, Z = 4, Dc = 1.428, Mr = 354.41, μ = 0.098 mm−1, F(000) = 752, R1 = 0.0522 and wR2 = 0.1138. A novel molecular scaffold, containing a heterocyclic ring instead of an aromatic ring, was synthesized by the Mannich reaction based on glycoluril.

It is imperative to remove organicarsenic acids (OAAs) from water because they can convert into highly toxic inorganic arsenic compounds in natural environment via biotic and abiotic degradation routes. Herein, seven Zr-based metal-organic frameworks (Zr-MOFs) including DUT-67, UiO-66, UiO-67, MOF-808, MOF-808F, NU-1000, NU-1000B with various structures were screened for the adsorptive removal of representative OAAs including p-arsanilic acid (ASA) and roxarsone (ROX) in water media. Initial screening found that MOF-808 and MOF-808F have the largest adsorption capacities. Therefore, their adsorption behaviors including adsorption kinetics, isotherms, specificity and effects of pH were fully investigated. Remarkably, MOF-808F had the second largest maximum adsorption capacities of ASA (621.1 mg g−1) and ROX (709.2 mg g−1) among the reported MOF-based adsorbents. In addition, MOF-808F showed excellent selectivity and reusability and no observable drop of adsorption efficiency was found in the presence of equimolar competing ions (Cl−, OAc− or SO42−) or after three successive adsorptive runs. By contrast, MOF-808 had inferior adsorption specificity and reusability in spite of the very similar structure with MOF-808F. The structure-dependent adsorption performances can be explained by the distinct adsorptive mechanisms, which were revealed by zeta potential measurements, X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculation etc. The dominant interaction between MOF-808 and ASA was coordination interactions, while ASA adsorption over MOF-808F was governed by the synergistic effect of π-π stacking, hydrogen bonding, and electrostatic interactions. This work no only presented an excellent adsorbent (MOF-808F) toward OAAs, but also revealed the structure dependent adsorption performances/mechanisms.

Highly efficient decontamination of heavily toxic Cr