Search

Restrictive barriers and efficient clearance mechanisms make delivery of therapeutics to the back of the eye particularly challenging. An optically transparent, thermally gelling copolymer scaffold that can simply be mixed with an active pharmaceutical ingredient of choice and injected directly into the vitreous chamber has been designed. The poly( N-isopropylacrylamide) (PNIPAAm)-based copolymer possesses a lower critical solution temperature near body temperature. Incorporating acrylic acid and poly(ethylene glycol) methacrylate into the polymer at optimized ratios modulates the lower critical solution temperature to transition the aqueous copolymer solution into a volume-consistent gel, which does not expel water, a common challenge with PNIPAAm-based materials. The addition of acryloyloxy dimethyl-γ-butyrolactone to the copolymer enables the polymer to slowly degrade and be cleared from the body. Herein, the synthesis and characterization of the novel copolymer scaffolds are described. A detailed report is provided on the intraocular biocompatibility profile as assessed via in vivo imaging techniques, histology, and immunostaining. Overall, the scaffolds were well tolerated in the rodent eye for the duration of the 17-day experiment. more...

Radiolabeling a protein, molecule, or polymer can provide accurate and precise quantification in biochemistry, biomaterials, pharmacology, and drug delivery research. Herein, we describe a method to more...

Thermo-gels based on chitosan crosslinked poly(N-isopropylacrylamide) were developed as alternatives to conventional eye drops for the sustained release of ketotifen fumarate in the treatment of allergic conjunctivitis. The thermo-gelling properties of the base polymer were altered prior to crosslinking with chitosan by incorporation of the hydrophilic and hydrophobic comonomers acrylic acid and methyl methacrylate respectively. Varying amounts of chitosan were incorporated by ionic interaction to produce polyelectrolyte complexes or by carbodiimide chemistry to produce covalently crosslinked networks. The lower critical solution temperature of all the chitosan crosslinked thermo-gels produced was below the surface temperature of the eye. All the chitosan crosslinked thermo-gels were found to have greater than 80% equilibrium water contents following gelation. The method and amount of chitosan incorporation allowed for tailor-ability of material rheologic properties, with full degradation occurring over a one-to-four-day period, and tailorable rates of release of 40-60% of the loaded allergy medication ketotifen fumarate. The chitosan crosslinked thermo-gels were demonstrated to be nontoxic both in vitro and in vivo. It was demonstrated that the synthesized materials could be applied to the inferior fornix of eye, sustaining a multiple day release of ketotifen fumarate, as an alternative to conventional eyedrops. STATEMENT OF SIGNIFICANCE: Topical eyedrops are the main treatment modality for anterior ocular conditions. However, due to the natural clearance mechanisms of the eye, topical eyedrops are well established to be largely ineffective as a method of drug delivery. Herein, we investigate a method of altering thermo-gel properties of an n-isopropylacrylamide based polymer to enable the incorporation of greater amounts of chitosan by different methods of crosslinking. By controlling the synthesis parameters, final material properties can be tailored to impart ideal spreading, retention on the eye, and the rate of degradation and drug release over several days. This work also focuses on studying the rheological properties of the chitosan crosslinked thermo-gels which has not been investigated previously. more...

There is a growing demand for effective treatments for ocular conditions that improve patient compliance and reduce side-effects. While methods such as implants and injections have proven effective, topical administration remains the method of choice for the delivery of therapeutics to the anterior segment of the eye. However, topical administration suffers from multiple drawbacks including low bioavailability of the target therapeutic, systemic toxicity, and the requirement for high therapeutic doses due to the effective clearance mechanisms that exist in the eye. Nanoparticles that have tunable mucoadhesion and/or mucopenetration offer outstanding potential to overcome the anatomical and physiological barriers present to improve ocular bioavailability, reduce toxicity, and increase ocular retention, among other benefits. The current review highlights recent advances in the field of developing nanocarriers with tunable mucoadhesion and mucopenetration for drug delivery to the eye. more...

Statistical methods were used to provide insight into a polymer complex system composed of lysozyme and alginate to quantify the effects of such parameters as pH, and ionic composition of the mixing solution on the properties of the complexes including composition, particle diameter, and zeta potential. Various crosslinkers (calcium, barium, iron[III], and bovine serum albumin), were used with lysozyme for complex formation to investigate the effect of crosslinker charge density on protein release kinetics, modelled using ktn . Multivariate statistical analysis showed that the kinetic parameters associated with the release were, not surprisingly highly dependent on the ionic strength of the release media, with higher ionic strength leading to faster release. The release parameter k was also shown to depend on the protein properties (size, ionic strength) while n was slightly, but not statistically dependent on the charge density of the crosslinker demonstrating that the nature of the crosslinker had minimal impact on drug release. The multivariate statistical has the potential to be used for optimization of the complexes and prediction of physical properties and degradation rates. more...

A method of making block copolymers utilizing free-radical polymerization and subsequent polymer conjugation is described. A disulphide functional radical initiator was used to polymerize methacrylic acid and 3-acrylamidophenylboronic acid. After purification, the disulphide bond of the end group was cleaved, revealing a thiol group which was used for subsequent conjugation to a polylactide containing the complementary maleimide functional group. The method is versatile and can be applied to the synthesis of various block copolymers without requiring the use of controlled/living radical polymerization methods. more...

Vascular leak is a key driver of organ injury in diseases, and strategies that reduce enhanced permeability and vascular inflammation are promising therapeutic targets. Activation of the angiopoietin-1 (ANG1)-Tie2 tyrosine kinase signaling pathway is an important regulator of vascular quiescence. Here we describe the design and construction of a new soluble ANG1 mimetic that is a potent activator of endothelial Tie2 in vitro and in vivo. Using a chimeric fusion strategy, we replaced the extracellular matrix (ECM) binding and oligomerization domain of ANG1 with a heptameric scaffold derived from the C-terminus of serum complement protein C4-binding protein α. We refer to this new fusion protein biologic as Hepta-ANG1, which forms a stable heptamer and induces Tie2 phosphorylation in cultured cells, and in the lung following intravenous injection of mice. Injection of Hepta-ANG1 ameliorates vascular endothelial growth factor- and lipopolysaccharide-induced vascular leakage, in keeping with the known functions of Angpt1-Tie2 in maintaining quiescent vascular stability. The new Hepta-ANG1 fusion is easy to produce and displays remarkable stability with high multimericity that can potently activate Tie2. It could be a new candidate ANG1 mimetic therapy for treatments of inflammatory vascular leak, such as acute respiratory distress syndrome and sepsis. more...

The use of hydrogel-based contact lens materials holds promise for ophthalmic drug delivery by increasing drug residence time, improving drug bioavailability, reducing administration frequency, and enhancing special site targeting. Issues such as ease of manufacturing, lens comfort and appropriate release kinetics must be considered. Furthermore, the high water content of hydrogel materials can result in rapid and poorly controlled release kinetics. Herein, we modified common hydrogels used in contact lens manufacturing with phenylboronic acid (PBA). PBA addresses these material design issues since boronate esters are easily formed when boron acid and diols interact, opening up a pathway for simple modification of the model lens materials with saccharide based wetting agents. The wetting agents have the potential to improve lens comfort. Furthermore, the hydrophobicity of PBA and the presence of diols can be useful to help control drug release kinetics. In this work, polymerizable 3-(acrylamido)phenylboronic acid (APBA) was synthesized and incorporated into various hydrogels used in contact lens applications, including poly(2-hydroxyethylmethacrylate) (PHEMA), polyvinylpyrrolidone (PVP) and poly( more...

Mucoadhesive thermogels were developed by crosslinking poly(n-isopropylacrylamide) based polymers with chitosan and incorporating disulfide bridges, capable of releasing cysteamine upon interaction with mucin, for the treatment of cystinosis. Through crosslinking with chitosan and incorporating varying concentrations of the disulfide monomer into the polymer backbone, the extent of how mucoadhesive the developed thermogels were could be controlled. Through disulfide bridging with mucin, the thermogels released 6 to 10 μg of the conjugate model 2-mercaptopyridine over five days. Utilizing chitosan as the crosslinker, the developed thermogels were shown to degrade to a statistically higher extent following incubation with lysozyme, the highest concentration tear enzyme, by gravimetric and rheologic analysis. The developed thermogels were extensively tested in vivo utilizing a rat model in which materials were applied directly to the corneal surface and a rabbit model in which thermogels were applied to the inferior fornix. With the developed models, there was no adverse reactions or visual discomfort incurred following application of the thermogels. It has been demonstrated that the thermogels produced can be applied to the inferior fornix and release the stable conjugated payload over several days. The developed thermogel was designed to improve upon the current clinical treatment options for ocular cystinosis which are acidic topical formulations that require reapplication multiple times a day. more...

The cornea is subject to a myriad of ocular conditions often attributed to cell loss or cell dysfunction. Owing to the superficial positioning of tissues composing the anterior segment of the eye, particularly the cornea, regenerative medicine in this region is aided by accessibility as compared with the invasive delivery methods required to reach deep ocular tissues. As such, cell therapies employing the use of carrier substrates have been widely explored. This review covers recent advances made in the delivery of stem cells, corneal epithelial cells, and corneal endothelial cells. Particular focus is placed on the most popular forms of synthetic scaffolds currently being examined: contact lenses, electrospun substrates, polymeric films, and hydrogels. more...

Delivery of drugs from contact lens materials is attractive for a number of reasons. However, the controlled delivery of hydrophilic drugs can be difficult to achieve due to the burst release of drug that is associated with materials of high water content, such as hydrogels. Silicone hydrogels have significant potential for drug delivery due to their increased hydrophobicity and the tortuous nature of the pores, overcoming some of the limitations associated with conventional hydrogel materials. The aim of this study was to examine the potential of model poly(ethylene glycol) (PEG) containing silicone hydrogels for delivery of hydrophilic aminoglycoside antibiotics. It was hypothesized that PEG, a polymer that has seen extensive use in biomedical applications, will provide in addition to hydrophilicity and protein repulsion, a mechanism for controlling the delivery of this hydrophilic antibiotic. PEG was combined with the macromer TRIS to create the model silicone hydrogel materials. The optical and physical properties of the novel TRIS-co-PEG silicone hydrogels exhibited excellent transparency, appropriate refractive index and high transmittance indicating minimal phase separation. Desirable properties such as wettability and protein repulsion were maintained across a wide range of formulations. The water content was found to be highly correlated with the ethylene oxide content. Drug release could be influenced through PEG content and was found to fit Higuchi-like kinetics. Overall, the study demonstrates that incorporation of PEG into a model silicone hydrogel could be used to control the release of a hydrophilic compound. Data suggests this is related to the unique structure and properties of PEG, which alter the types of water found in each formulation and the water content. more...

Reactive electrospinning is demonstrated as a viable method to create fast-responsive and degradable macroporous thermoresponsive hydrogels based on poly(oligoethylene glycol methacrylate) (POEGMA). Hydrazide- and aldehyde-functionalized POEGMA precursor polymers were coelectrospun to create hydrazone cross-linked nanostructured hydrogels in a single processing step that avoids the need for porogens, phase separation-driving additives, or scaffold postprocessing. The resulting nanostructured hydrogels can respond reversibly and repeatedly to changes in external temperature within seconds, in contrast to the minutes-to-hours response time observed with bulk hydrogels. Furthermore, nearly quantitative cell delamination can be achieved within 2 min of incubation at 4 °C, resulting in the recovery of as many or more (as well as more proliferatively active) cells from the substrate relative to the conventional trypsinization protocol. The combined macroporosity, nanoscale feature size, and interfacial switching potential of these nanostructured hydrogels thus offer promise for manipulating cell-hydrogel interactions as well as other applications in which rapid responses to external stimuli are desirable. more...

The main reasons for the discontinuation of contact lens wear are ocular dryness and discomfort. Proteoglycan 4 (PRG4), a mucinous glycoprotein, and hyaluronic acid (HA), a nonsulfated linear glycosaminoglycan, are naturally present in the eye and contribute to ocular hydration and lubrication. This study aimed to investigate the impact of the structure of the recombinant human PRG4 (rhPRG4)/HA complex on contact lens properties, when one agent is grafted and the counterpart is physisorbed on the surface of model conventional or silicone contact lens materials. Investigation of the wettability, water retention, antifouling, and boundary lubricant properties of the prepared hydrogels showed that the rhPRG4/HA interactions varied with the rhPRG/HA configuration on the hydrogel surface as well as the composition of the underlying substrate used. The rhPRG4-physisorbed/HA-grafted sample was characterized by better antifouling and boundary lubricant properties on the model conventional hydrogels, while the HA-physisorbed/rhPRG4-grafted sample exhibited improved surface wettability, antifouling, and water-retentive properties on the model silicone hydrogels. The results of this study contribute to the design of biomimetic contact lens surfaces that work synergistically with ocular fluid-phase biological agents to enhance compatibility between the contact lens and the ocular environment, alleviating dry eye symptoms and improving comfort. more...

Metal-free click-chemistry can be used to create silicone hydrogels for ocular drug delivery applications, imparting the benefits of silicones without catalyst contamination. Previous work has demonstrated the capacity for these materials to significantly reduce protein adsorption. Building upon this success, the current work examines and optimizes different materials in terms of their protein adsorption and drug release capabilities. Specifically, incorporating lower molecular weight poly-ethylene glycol (PEG) is better able to reduce protein adsorption. However, with higher molecular weight PEG, the materials exhibit excellent water content and better drug release profiles. The lower molecular weight PEG is also able to deliver the drug over a period in excess of four months, with the amount of crosslinking having the greatest impact on the amount of drug release. Overall, these materials show great promise for ocular applications. more...

Silicone hydrogel contact lenses (CLs) permit increased oxygen permeability through their incorporation of siloxane functional groups. However, contact lens biofouling can be problematic with these materials; surface modification to increase lens compatibility is necessary for acceptable properties. This work focuses on the creation of an antifouling CL surface through a novel grafting method. A polymer incorporating 2-methacryloyloxyethyl phosphorylcholine (MPC), well known for its antifouling and biomimetic properties, was grafted to the model lens surfaces using surface-initiated atom transfer radical polymerization (SI-ATRP). The SI-ATRP modification generated a unique double-grafted polymeric architecture designed to resist protein adsorption through the presence of a surrounding hydration layer due to the PC groups and steric repulsion due to the density of the grafted chains. The polymer was grafted from model silicone hydrogel CL using a four-step SI-ATRP process. Attenuated total reflectance-Fourier transform infrared spectroscopy and XPS were used to confirm the surface chemical composition at each step of the synthesis. Both the surface wettability and equilibrium water content of the materials increased significantly upon polyMPC modification. The surface water contact angle was as low as 16.04 ± 2.37° for polyMPC-50 surfaces; complete wetting (∼0°) was observed for polyMPC-100 surfaces. A decrease in the protein adsorption by as much as 83% (p more...

While the use of topical drops for the delivery of drugs to the anterior of the eye is well accepted, it is far from efficient with as little as 5% of the drug instilled on the eye actually reaching the target tissue. The ability to prolong the residence time on the eye is desirable. Based on the acceptability of 2-hydroxyethyl methacrylate based polymers in contact lens applications, the current work focuses on the development of a poly(2-hydroxyethyl methacrylate (HEMA)) nanoparticle system. The particles were modified to allow for degradation and to permit mucoadhesion. Size and morphological analysis of the final polymer products showed that nano-sized, spherical particles were produced. FTIR spectra demonstrated that the nanoparticles comprised poly(HEMA) and that 3-(acrylamido)phenylboronic acid (3AAPBA), as a mucoadhesive, was successfully incorporated. Degradation of nanoparticles containing N,N&prime, bis(acryloyl)cystamine (BAC) after incubation with DL-dithiothreitol (DTT) was confirmed by a decrease in turbidity and through transmission electron microscopy (TEM). Nanoparticle mucoadhesion was shown through an in-vitro zeta potential analysis. more...

Vascular leak is a key driver of organ injury in diseases such as Acute Respiratory Distress Syndrome caused by viruses, including COVID-19. Strategies that reduce enhanced permeability and vascular inflammation are promising therapeutic targets. Activation of the Angiopoietin-1 (Angpt1)-Tie2 tyrosine kinase signaling pathway is an important regulator of vascular quiescence. Here we describe the design and construction of a new soluble ANGPT1 mimetic that is a potent activator of endothelial Tie2 in vitro and in vivo. Using a chimeric fusion strategy, we replaced the extracellular matrix (ECM) binding and oligomerization domain of ANGPT1 with a heptameric scaffold derived from the C-terminus of serum complement protein C4-binding protein α (C4BP). We refer to this new fusion protein biologic as C4BP-ANG1, which forms a stable heptamer and induces TIE2 phosphorylation in cultured cells, and in the lung followingi.v.injection of mice. Injection of C4BP-ANG1 ameliorates VEGF- and lipopolysaccharide-induced vascular leakage, in keeping with the known functions of Angpt1-Tie2 in maintaining quiescent vascular stability, and therefore is a promising candidate treatment for inflammatory endothelial dysfunction. more...

Treatment of the injured joint with rhPRG4 is based on recent observations that inflammation diminishes expression of native PRG4. Re-establishing lubrication between pressurized and sliding cartilage surfaces during locomotion promotes the nascent expression of PRG4 and thus intra-articular (IA) treatment strategies should be supported by pharmacokinetic evidence establishing the residence time of rhPRG4. A total of 21 Yucatan minipigs weighing ~55 kg each received 4 mg of (131)I-rhPRG4 delivered by IA injection 5 days following surgical ACL transection. Animals were sequentially euthanized following IA rhPRG4 at 10 min (time zero), 24, 72 h, 6, 13 and 20 days later. The decay of the (131)I-rhPRG4 was measured relative to a non-injected aliquot and normalized to the weight of cartilage samples, menisci and synovium, and known cartilage volumes from each compartment surface obtained from representative Yucatan minipig knees. Decay of (131)I-rhPRG4 from joint tissues best fit a two-compartment model with an a half-life (t(1/)2α) of 11.28 h and b half-life (t(1/2β)) of 4.81 days. The tibial and femoral cartilage, meniscii, and synovium retained 7.7% of dose at 24 h. High concentrations of rhPRG4 were found in synovial fluid (SF) that was non-aspiratable and resided on the articular surfaces, removable by irrigation, at 10 min following (131)I-rhPRG4 injection. Synovial fluid K21 exceeded K12 and SF t(1/20β) was 28 days indicating SF is the reservoir for rhPRG4 following IA injection. Clinical Significance: rhPRG4 following IA delivery in a traumatized joint populates articular surfaces for a considerable period and may promote the native expression of PRG4. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:386–396, 2019. more...

A reactive electrospinning strategy is used to fabricate viable and proliferative cell-loaded nanofibrous hydrogel scaffolds in a single step using an all-aqueous approach. In situ gelling and degradable hydrazone-cross-linked poly(oligo ethylene glycol methacrylate)-based hydrogel nanofibrous networks can be produced directly in the presence of cells to support long-term cell viability, adhesion, and proliferation, in contrast to bulk hydrogels of the same composition. Furthermore, the capacity of the gel nanofibers to retain bound water maintains this high cell viability and proliferative capacity following a freeze/thaw cycle without requiring any cryoprotectant additives, ideal properties for ready-to-use functional tissue patches. more...

Protein-alginate complexes were prepared with the objective of quantifying the influence of the parameters such as protein characteristics on the final complex properties and their dissociation rates. Cytochrome C, lysozyme, myoglobin, chymotrypsin, and bovine serum albumin were used as model proteins for preparing the complexes and physical properties such as composition, average diameter, and zeta potential of the complexes formed were measured. In addition, protein release kinetics from the complexes in response to changes in pH and ionic strength were investigated. The results clearly demonstrated that, even in the absence of a cation, proteins could be complexed with alginate and showed a decreased release rate under the appropriate conditions. Projection to Latent Structures was applied as a multivariate statistical analysis method to mathematically describe the final properties and the protein release kinetics as a function of the influencing variables. It was found that the physical characteristics of the complexes could be accurately modelled with low error thresholds indicative of good fit and prediction capabilities of the model. The statistical model indicated that the release kinetics parameters were highly dependent on the ionic strength and the protein net charge as a function of pH, demonstrating the potential use of these complexes in ion-/pH-sensitive delivery systems. more...

Discontinuation of contact lens wear as a result of ocular dryness and discomfort is extremely common; as many as 26% of contact lens wearers discontinue use within the first year. While patients are generally satisfied with conventional hydrogel lenses, improving on-eye comfort continues to remain a goal. Surface modification with a biomimetic, ocular friendly hydrophilic layer of a wetting agent is hypothesized to improve the interfacial interactions of the contact lens with the ocular surface. In this work, the synthesis and characterization of poly(2-hydroxyethyl methacrylate) surfaces grafted with a hydrophilic layer of hyaluronic acid are described. The immobilization reaction involved the covalent attachment of thiolated hyaluronic acid (20 kDa) on acrylated poly(2-hydroxyethyl methacrylate) via nucleophile-initiated Michael addition thiol-ene "click" chemistry. The surface chemistry of the modified surfaces was analyzed by Fourier transform infrared spectroscopy-attenuated total reflectance and X-ray photoelectron spectroscopy. The appearance of N (1s) and S (2p) peaks on the low resolution X-ray photoelectron spectroscopy spectra confirmed successful immobilization of hyaluronic acid. Grafting hyaluronic acid to the poly(2-hydroxyethyl methacrylate) surfaces decreased the contact angle, the dehydration rate, and the amount of nonspecific sorption of lysozyme and albumin in comparison to pristine hydrogel materials, suggesting the development of more wettable surfaces with improved water-retentive and antifouling properties, while maintaining optical transparency (92%). In vitro testing also showed excellent viability of human corneal epithelial cells with the hyaluronic acid-grafted poly(2-hydroxyethyl methacrylate) surfaces. Hence, surface modification with hyaluronic acid via thiol-ene "click" chemistry could be useful in improving contact lens surface properties, potentially alleviating symptoms of contact lens related dryness and discomfort during wear. more...

Contact lens friction significantly correlates with subjective comfort. Hyaluronan (HA) and proteoglycan 4 (PRG4) are natural boundary lubricants present in the body. The objective of this study was to assess the effect of crosslinked HA into the bulk of model contact lens materials pHEMA, pHEMA/TRIS, and DMAA/TRIS on surface wettability, protein sorption, and boundary lubricating properties at a material-cornea biointerface, both alone and synergistically with PRG4 in solution. Surface wettability was assessed by water contact angle measurement, protein sorption by lysozyme sorption assay, and boundary lubricating properties using an in vitro friction test method. HA incorporation (HAinc ) increased the surface wettability of all materials, and reduced protein sorption for pHEMA and DMAA/TRIS. HAinc increased friction for pHEMA, and DMAA/TRIS, whereas a decrease was observed for pHEMA/TRIS. A combination of HAinc and PRG4sol had a synergistic effect of reducing friction only for pHEMA/TRIS. This combination had similar friction reduction compared with PRG4sol alone for DMAA/TRIS. These results indicate HA incorporation could be an effective internal wetting agent, antiadhesive, and boundary lubricant for pHEMA/TRIS silicone hydrogels. In conclusion, HA incorporation can reduce friction of hydrogels alone and in combination with PRG4 in solution, though in a hydrogel composition-dependent (e.g., TRIS) manner. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1818-1826, 2018. more...

Corneal blindness is a major cause of blindness in the world and corneal transplantation is the only widely accepted treatment to restore sight in these eyes. However, it is becoming increasingly difficult for eye banks to meet the increasing demand for transplantable tissue, which is in part due to population aging. Donor tissue shortage is therefore a growing concern globally and there is a need for alternatives to human donor corneas. Biosynthetic corneal substitutes offer several significant advantages over native corneas: Large-scale production offers a powerful potential solution to the severe shortage of human donor corneas worldwide; Good manufacturing practices ensure sterility and quality control; Acellular corneal substitutes circumvent immune rejection induced by allogeneic cells; Optical and biomechanical properties of the implants can be adapted to the clinical need; and finally these corneal substitutes could benefit from new advances in biomaterials science, such as surface coating, functionalization and nanoparticles. This review highlights critical contributions from laboratories working on corneal stromal substitutes. It focuses on synthetic inert prostheses (keratoprostheses), acellular scaffolds with and without enhancement of endogenous regeneration, and cell-based replacements. Accent is put on the physical properties and biocompatibility of these biomaterials, on the functional and clinical outcome once transplanted in vivo in animal or human eyes, as well as on the main challenges of corneal stromal replacement. Regulatory and economic aspects are also discussed. All of these perspectives combined highlight the founding principles of the clinical application of corneal stromal replacement, a concept that has now become reality. more...

Biomaterials in ophthalmic applications have a long and very successful history. Among the first ophthalmic biomaterials, intraocular lenses have been restoring sight to patients for more than 50 years. This chapter will describe innovations in contact lens materials including the advent of silicone hydrogel materials and their growing use. Changes in intraocular lenses and the potential for the development of a truly accommodating intraocular lens will be discussed. The emerging use of biomaterials in the treatment of glaucoma is a newer application of biomaterials in the eye. The use of biomaterials to create artificial retinas and the potential for the application of these novel devices to restore sight to patients who no longer have or who never had vision will be described. more...

Creating micro/nanostructured hydrogels with tunable morphologies under cell-friendly processing conditions would enable rational engineering of hydrogel scaffolds for targeted biomedical applications. Herein, an all-aqueous single-step reactive electrospinning method is applied to prepare hydrogel networks with controlled morphologies on both the nanoscale and the microscale. Hydrazide and aldehyde-functionalized poly(oligo ethylene glycol methacrylate) (POEGMA) are co-spun from a double barrel syringe together with poly(ethylene oxide) (PEO) as an electrospinning aid. By varying the concentrations and molecular weights of PEO and/or POEGMA, various morphologies from pure fibers to beaded fibers to bead network morphologies with tunable bead sizes can be fabricated, all of which remain monolithically stable in water due to the dynamic covalent crosslinks formed within the gel structure. The rates and magnitudes of swelling, degradation, and mechanics of the resulting scaffolds can be tuned by independently controlling gel morphologies on the nanoscale (i.e. crosslink density within the gel) and the microscale (i.e. the network structure formed), with an atypical independence of swelling relative to the mechanics and degradation rate observed. Furthermore, the internal morphology of the networks is demonstrated to systematically alter both the cell responses within the scaffolds and the rate of protein release from the scaffolds, with small fibers showing optimal cell proliferation, bead networks exhibiting the slowest protein release kinetics and very high maintained cell viabilities post-electrospinning, and beaded fibers showing intermediate properties. STATEMENT OF SIGNIFICANCE: Controlling the internal structure of hydrogels is critical to successfully applying hydrogels in biomedical applications such as tissue engineering or cell/drug delivery. However, current techniques to fabricate hydrogel scaffolds typically require additives or gelation processes that are poorly compatible with cells and/or require multi-step processes. In this paper, we describe the fabrication of hydrogel scaffolds with tunable feature sizes (from nanometer to micrometer scale) and structures (from all fibers to bead/fiber mixtures to a new "bead network" morphology) using a reactive electrospinning strategy leveraging dynamic hydrazone crosslinking. We show single-step cell/protein loading and systematic control over cell proliferation and protein release kinetics by systematically manipulating the scaffold morphologies and feature sizes, allowing facile customization of scaffold properties for targeted applications. more...

While eye drops account for the majority of ophthalmic formulation for drug delivery, their efficiency is limited by rapid pre-corneal loss. In this study, we investigate nanogel suspensions in order to improve the topical ocular therapy by reducing dosage and frequency of administration. We synthesized self-assembling nanogels of 140 nm by grafting side chains of poly(N-tert-butylacrylamide) (PNtBAm) on methylcellulose via cerium ammonium nitrate. Successful grafting of PNtBAm onto methylcellulose (MC) was confirmed by both NMR and ATR. Synthesized molecules (MC-g-PNtBAm) self-assembled in water driven by hydrophobic interaction of the grafted side chains creating colloid solutions. Materials were synthesized by changing feed ratios of acid, initiator and monomer in order to control the degree of hydrophobic modification. The nanogels were tested for different degrees of grafting. Viability studies performed with HCE cells testified to the biocompatibility of poly(N-tert-butylacrylamide) grafted methylcellulose nanogels. Dexamethasone was entrapped with an efficiency superior to 95 % and its release presented minimal burst phase. Diffusion of drug from the nanogels was found to be delayed by increasing the degree of grafting. The release profile of the entrapped compound from the MC-g-PNtBAm nanogels can thus be tuned by simply adjusting the degree of hydrophobic modification. MC-g-PNtBAm nanogels present promising properties for ocular drug delivery. more...

Hydrogels have been widely explored for biomedical applications, with injectable hydrogels being of particular interest for their ability to precisely deliver drugs and cells to targets. Although these hydrogels have demonstrated satisfactory properties in many cases, challenges still remain for commercialization. In this paper, we describe a simple injectable hydrogel based on poly(ethylene glycol) (PEG) and a vitamin E (Ve) methacrylate copolymer prepared via simple free radical polymerization and delivered in a solution of low molecular weight PEG and Ve as the solvent instead of water. The hydrogel formed immediately in an aqueous environment with a controllable gelation time. The driving force for gelation is attributed to the self-assembly of hydrophobic Ve residues upon exposure to water to form a physically cross-linked polymer network via polymer chain rearrangement and subsequent phase separation, a spontaneous process with water uptake. The hydrogels can be customized to give the desired water content, mechanical strength, and drug release kinetics simply by formulating the PEGMA-co-Ve polymer with an appropriate solvent mixture or by varying the molecular weight of the polymer. The hydrogels exhibited no significant cytotoxicity in vitro using fibroblasts and good tissue compatibility in the eye and when injected subcutaneously. These polymers thus have the potential to be used in a variety of applications where injection of a drug or cell containing depot would be desirable. more...

PURPOSE: Drug delivery to the anterior eye has a low compliance and results in significant drug losses. In pediatric patients, eye diseases such as myopia and retinoblastoma can potentially be treated pharmacologically, but the risk associated with high drug concentrations coupled with the need for regular dosing limits their effectiveness. The current study examined the feasibility of atropine and roscovitine delivery from model silicone hydrogel materials which could potentially be used to treat myopia and retinoblastoma, respectively. METHODS: Model silicone hydrogel materials that comprised TRIS and DMA were prepared with the drug incorporated during synthesis. Various materials properties, with and without incorporated drug, were investigated including water uptake, water contact angle, and light transmission. Drug release was evaluated under sink conditions into phosphate buffered saline. RESULTS: The results demonstrate that up to 2 wt% of the drugs can be incorporated into model silicone hydrogel materials without adversely affecting critical materials properties such as water uptake, light transmission, and surface hydrophilicity. Equilibrium water content ranged from 15 to 32% and transmission exceeded 89% for materials with at least 70% DMA. Extended release exceeding 14 days was possible with both drugs, with the total amount of drug released from the materials ranging from 16% to over 76%. Although a burst effect was noted, this was thought to be due to surface-bound drug, and therefore storage in an appropriate packaging solution could be used to overcome this if desired. CONCLUSIONS: Silicone hydrogel materials have the potential to deliver drugs for over 2 weeks without compromising lens properties. This could potentially overcome the need for regular drop instillation and allow for the maintenance of drug concentration in the tear film over the period of wear. This represents a potential option for treating a host of ophthalmic disorders in children including myopia and retinoblastoma. more...

The introduction of high oxygen transmissibility silicone hydrogel lenses ameliorated hypoxia-related complications, making them the most prescribed type of contact lens (CL). Despite the progress made over the last 2 decades to improve their clinical performance, symptoms of ocular dryness and discomfort and a variety of adverse clinical events are still reported. Consequently, the rate of CL wear discontinuation has not been appreciably diminished by their introduction. Aiming to improve the interfacial interactions of silicone hydrogel CLs with the ocular surface, a biomimetic layer of hydrophilic glycosaminoglycan hyaluronic acid (HA) (100 kDa) was covalently attached to the surface of model poly(2-hydroxyethyl methacrylate- co-3-methacryloxypropyl-tris-(trimethylsiloxy)silane) (pHEMA- co-TRIS) silicone hydrogel materials via UV-induced thiol-ene "click" chemistry. The surface structural changes after each modification step were studied by Fourier transform infrared spectroscopy-attenuated total reflectance and X-ray photoelectron spectroscopy (XPS). Successful grafting of a homogeneous HA layer to the surface of the model silicone hydrogels was confirmed by the consistent appearance of N (1s) and the significant decrease of the Si (2p) peaks, as determined by low-resolution angle-resolved XPS. The HA-grafted surfaces demonstrated reduced contact angles, dehydration rate, and nonspecific deposition of lysozyme and albumin, while maintaining their optical transparency (>90%). In vitro studies demonstrated that the HA-grafted pHEMA- co-TRIS materials did not show any toxicity to human corneal epithelial cells. These results suggest that surface immobilization of HA via thiol-ene "click" chemistry can be used as a promising surface treatment for silicone hydrogel CLs. more...

Polymer-based nanoparticle delivery systems have attracted a lot of attention recently due to their chemical versatility offering precise engineering for targeted drug delivery. However, surface functionalization of these nanoparticles could lead to poor control over their properties. A strategy to overcome this shortcoming is synthesis of self-assembled biointegrated block copolymers which offer reproducible preparation, quantitative control over ligand density and easy production. These polymers are prepared by well-established polymerization and conjugation chemistries. The resultant nanoparticles are prepared by self-assembly of these polymers in a single step where fine tuning of these nanoparticles is accomplished by varying the composition of block polymers. more...

Injectable, dual-responsive, and degradable poly(oligo ethylene glycol methacrylate) (POEGMA) hydrogels are demonstrated to offer potential for cell delivery. Charged groups were incorporated into hydrazide and aldehyde-functionalized thermoresponsive POEGMA gel precursor polymers via the copolymerization of N,N'-dimethylaminoethyl methacrylate (DMAEMA) or acrylic acid (AA) to create dual-temperature/pH-responsive in situ gelling hydrogels that can be injected via narrow gauge needles. The incorporation of charge significantly broadens the swelling, degradation, and rheological profiles achievable with injectable POEGMA hydrogels without significantly increasing nonspecific protein adsorption or chronic inflammatory responses following in vivo subcutaneous injection. However, significantly different cell responses are observed upon charge incorporation, with charged gels significantly improving 3T3 mouse fibroblast cell adhesion in 2D and successfully delivering viable and proliferating ARPE-19 human retinal epithelial cells via an "all-synthetic" matrix that does not require the incorporation of cell-adhesive peptides. more...

Ocular dryness and discomfort are the primary reasons for the discontinuation of contact lens wear. This is mainly due to poorly hydrated contact lens surfaces and increased friction, particularly at the end of the day and can potentially cause reduced vision or even inflammation. Proteoglycan 4 (PRG4) is a mucinous glycoprotein with boundary lubricating properties, naturally found in the eye, able to prevent tear film evaporation and protect the ocular surface during blinking. Aiming to improve the interfacial interactions between the ocular surface and the contact lens, the synthesis and characterization of surface-modified model contact lenses with PRG4 is described. Full-length recombinant human PRG4 (rhPRG4) was successfully grafted onto the surface of model conventional and silicone hydrogel (SiHy) contact lenses via its somatomedin B-like end-domain using N, N'-carbonyldiimidazole linking chemistry. Grafting was assessed by Fourier transform infrared spectroscopy-attenuated total reflectance, X-ray photoelectron spectroscopy, and radioactive (I131) labeling. Surface immobilization of rhPRG4 led to model conventional and SiHy materials with improved antifouling properties, without impacting optical transparency or causing any toxic effects to human corneal epithelial cells in vitro. The surface wettability and the boundary friction against human corneal tissue were found to be substrate-dependent, with only the rhPRG4-grafted model SiHy exhibiting a reduced contact angle and kinetic friction coefficient compared to the unmodified surfaces. Hence, clinical grade rhPRG4 can be an attractive candidate for the development of novel bioinspired SiHy contact lenses, providing improved comfort and overall lens performance. more...

The hydrophobicity of silicone elastomers can compromise their utility in some biomaterials applications. Few effective processes exist to introduce hydrophilic groups onto a polysiloxane backbone and subsequently crosslink the material into elastomers. This problem can be overcome through the utilization of metal-free click reactions between azidoalkylsilicones and alkynyl-modified silicones and/or PEGs to both functionalize and crosslink silicone elastomers. Alkynyl-functional PEG was clicked onto a fraction of the available azido groups of a functional polysiloxane, yielding azido reactive PDMS-g-PEG rake surfactants. The reactive polymers were then used to crosslink alkynyl-terminated PDMS of different molecular weights. Using simple starting materials, this generic yet versatile method permits the preparation and characterization of a library of amphiphilic thermoset elastomers that vary in their composition, crosslink density, elasticity, hydrogel formation, and wettability. An appropriate balance of PEG length and crosslink density leads to a permanently highly wettable silicone elastomer that demonstrated very low levels of protein adsorption. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015, 53, 1082–1093 more...

Hyaluronan (HA) is a hydrophilic biopolymer that has been explored as a wetting agent in contact lens applications. In this study, HA was modified with siloxy or polyethylene glycol moieties using click chemistry to make it more soluble in monomer solutions used to synthesize model contact lens materials; unmodified HA was not soluble in the same monomer solutions. The water contents of the silicone hydrogels were not increased by the presence of modified HA, nor was there a decrease in the surface contact angle. However, modified HA did lead to a reduction in lysozyme adsorption in some cases. The leaching rate of HA modified with polyethylene glycol from a 78:22 DMA:TRIS(OH) hydrogel was significantly slower than for unmodified HA. more...

OBJECTIVES The ability of hyaluronic acid (HA) to act as a functional additive in model silicone hydrogel contact lenses to alter the uptake and release characteristics of timolol was investigated. METHODS Model contact lenses were prepared using 2 primary formulations: 2-hydroxyethyl methacrylate (HEMA) with 3-methacryloxypropyltris (trimethylsiloxy) silane (TRIS) in a 9:1 (wt:wt) ratio or N,N-dimethylacrylamide (DMA) with TRIS in a 1:1 (wt:wt) ratio. Ethylene glycol dimethacrylate (EGDMA) was used as the cross-linker. Four different model lens compositions were explored: unmodified controls, lenses containing HA, lenses that were molecularly imprinted with timolol maleate, and those that were both imprinted and contained HA. Model lenses were then used in subsequent materials characterization, drug loading, and drug release studies. RESULTS Hyaluronic acid was shown to have the ability to act as a functional additive in these model contact lenses, significantly increasing the drug loading and release mass. This ability seemed to be independent of molecular imprinting, but its efficacy was related to the concentration of HA contained within model lenses and the concentration of drug loading solution used to facilitate uptake. Timolol release was sustained for a duration of approximately 2 days, and the dose of drug was shown to be controlled by both HA-drug interactions and molecular imprinting within the silicone hydrogels. CONCLUSIONS Hyaluronic acid, although different than typical functional monomers used in molecular imprinting, can be a useful additive to modify the mass of drug release from model silicone hydrogel lenses. more...

The relationship between the delivery of dexamethasone and the composition of silicone hydrogel materials was investigated. Two hydrophilic monomers (2-hydroxyethyl methacrylate or N,N-dimethylacrylamide), a siloxy methacrylate-based monomer (1-(Bis(trimethylsiloxy)methylsilyl)propoxy-3-metacryloxy-2-propanol, a polysiloxane (monomethacryloxypropyl-terminated polydimethylsiloxane) and a polymerizable silicone surfactant (Silmer ACR A008-UP) were used to synthesize silicone hydrogels of variable composition. The materials properties, such as surface wettability and equilibrium water content, were highly dependent on polymer composition. All dexamethasone-loaded hydrogels showed uptake that was driven primarily by sorption to the polymer phase. Furthermore, a positive correlation between loading mass and equilibrium water content was established. The duration of drug release from the hydrogels ranged from one to greater than two weeks depending on the monomer composition and relative contribution of hydrophilic and hydrophobic monomers. Higuchi model rate constants for the release showed strong correlation with the equilibrium water content, signifying that the release is likely controlled by aqueous phase diffusion. more...

Cells are known to respond differently when grown on materials of varying stiffness. However, the mechanism by which a cell senses substrate stiffness is unknown. Lower crosslink density elastomers formed from acrylated star-poly(d,l lactide-co-ϵ-caprolactone) have previously been shown to support higher smooth muscle cell proliferation in in vitro culture. This difference in growth was hypothesized to be due to differences in protein adsorption that resulted from differences in polymer chain mobility at the surface. Therefore, layer mass and viscoelastic properties were measured for HSA, IgG, fibronectin, vitronectin, and serum supplemented media adsorbed to elastomers of two crosslink densities. Significantly more fibronectin adsorbed to the lower crosslink density surface while significantly more IgG adsorbed to the higher crosslink density surface. Furthermore, differences in fibronectin and IgG layer shear moduli were observed, suggesting that there was a difference in the conformation of the adsorbed protein. ATR-FTIR analysis showed that the lower crosslink density elastomer absorbed more surface water. The increased amount of water may cause greater entropic gains upon protein adsorption to the lower crosslink density surface, which increases total protein adsorption from serum and may cause differences in protein conformation and thus cell behavior. more...