Search

Viscosin is a membrane-permeabilizing, cyclic lipopeptide (CLiP) produced by Pseudomonas species. Here, we have studied four synthetic analogs (L1W, V4W, L5W, and L7W), each with one leucine (Leu; L) or valine residue exchanged for tryptophan (Trp; W) by means of time-resolved fluorescence spectroscopy of Trp. To this end, we recorded the average fluorescence lifetime, rotational correlation time and limiting anisotropy, dipolar relaxation time and limiting extent of relaxation, rate constant of acrylamide quenching, effect of H 2 O-D 2 O exchange, and time-resolved half-width of the spectrum in the absence and presence of POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine) liposomes. Structure, localization, and hydration of the peptides were described by molecular dynamics simulations. The combination of the parameters provides a good description of the molecular environments of the Trp positions and the behavior of viscosin as a whole. Of particular value for characterizing the impact of viscosin on the membrane is the dipolar relaxation of Trp4 in V4W, which is deeply embedded in the hydrophobic core. The limiting relaxation level represents the membrane perturbation-unlike typical membrane probes-at the site of the perturbant. Fractions of Trp4 relax at different rates; the one not in contact with water upon excitation relaxes via recruitment of a water molecule on the 10-ns timescale. This rate is sensitive to the concerted membrane perturbation by more than one lipopeptide, which appears at high lipopeptide concentration and is assumed a prerequisite for the final formation of a membrane-permeabilizing defect. Trp7 relaxes primarily with respect to neighboring Ser residues. Trp5 flips between a membrane-inserted and surface-exposed orientation., Competing Interests: Declaration of interests The authors declare no competing interests., (Copyright © 2024 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

Competing Interests: Declaration of interests The authors declare no competing interests.

Micellar drug delivery systems (MDDS) for the intravenous administration of poorly soluble drugs have great advantages over alternative formulations in terms of the safety of their excipients, storage stability, and straightforward production. A classic example is mixed micelles of glycocholate (GC) and lecithin, both endogenous substances in human blood. What limits the use of MDDS is the complexity of the transitions after injection. In particular, as the MDDS disintegrate partially or completely after injection, the drug has to be transferred safely to endogenous carriers in the blood, such as human serum albumin (HSA). If this transfer is compromised, the drug might precipitate─a process that needs to be excluded under all circumstances. The key question of this paper is whether the high local concentration of GC at the moment and site of MDDS dissolution might transiently saturate HSA binding sites and, hence, endanger quick drug transfer. To address this question, we have used a new approach, which is time-resolved fluorescence spectroscopy of the single tryptophan in HSA, Trp-214, to characterize the competitive binding of GC and the drug substitute anilinonaphthalenesulfonate (ANS) to HSA. Time-resolved fluorescence of Trp-214 showed important advantages over established methods for tackling this problem. ANS has been the standard "model drug" to study albumin binding for decades, given its structural similarity to the class of naphthalene-containing acidic drugs and the fact that it is displaced from HSA by numerous drugs (which presumably bind to the same sites). Our complex global fit uses the critical approximation that the average lifetimes behave similarly to a single lifetime, but the resulting errors are found to be moderate and the results provide a convincing explanation of the, at first glance, counterintuitive behavior. Accordingly, and largely in line with the literature, we observed two types of sites binding ANS at HSA: 3 type A, rather peripheral, and 2 type B, likely more central sites. The latter quench Trp-214 by Förster Resonance Energy Transfer (FRET) with a rate constant of ≈0.4 ns -1 per ANS. Adding millimolar concentrations of GC displaces ANS from the A sites but not from B sites. At incomplete ANS saturation, this causes a GC-induced translocation of ANS from A to the more FRET-active B sites. This leads to the apparent paradox that the partial displacement of ANS from HSA increases its quenching effect on Trp-214. The most important conclusion is that (ANS-like) drugs cannot be displaced from the type-B sites, and consequently, drug transfer to these sites is not impaired by competitive binding of GC in the vicinity of a dissolving micelle. The second conclusion is that for unbound GC above the CMC (9 mM), ANS equilibrates between HSA and GC micelles but with a strong preference for free sites on HSA. That means that even persisting micelles would lose their cargo readily once exposed to HSA. For all MDDS sharing this property, targeted drug delivery approaches involving them as the nanocarrier would be pointless.

A better molecular understanding of the temperature-triggered drug release from lysolipid-based thermosensitive liposomes (LTSLs) is needed to overcome the recent setbacks in developing this important drug delivery system. Enhanced drug release was previously rationalized in terms of detergent-like effects of the lysolipid monostearyl lysophosphatidylcholine (MSPC), stabilizing local membrane defects upon LTSL lipid melting. This is highly surprising and here referred to as the 'lysolipid paradox,' because detergents usually induce the opposite effect─they cause leakage upon freezing, not melting. Here, we aim at better answers to (i) why lysolipid does not compromise drug retention upon storage of LTSLs in the gel phase, (ii) how lysolipids can enhance drug release from LTSLs upon lipid melting, and (iii) why LTSLs typically anneal after some time so that not all drug gets released. To this end, we studied the phase transitions of mixtures of dipalmitoylphosphatidylcholine (DPPC) and MSPC by a combination of differential scanning and pressure perturbation calorimetry and identified the phase structures with small- and wide-angle X-ray scattering (SAXS and WAXS). The key result is that LTSLs, which contain the standard amount of 10 mol % MSPC, are at a eutectic point when they release their cargo upon melting at about 41 °C. The eutectic present below 41 °C consists of a MSPC-depleted gel phase as well as small domains of a hydrocarbon chain interdigitated gel phase containing some 30 mol % MSPC. In these interdigitated domains, the lysolipid is stored safely without compromising membrane integrity. At the eutectic temperature, both the MSPC-depleted bilayer and interdigitated MSPC-rich domains melt at once to fluid bilayers, respectively. Intact, fluid membranes tolerate much less MSPC than interdigitated domains─where the latter have melted, the high local MSPC content causes transient pores. These pores allow for fast drug release. However, these pores disappear, and the membrane seals again as the MSPC distributes more evenly over the membrane so that its local concentration decreases below the pore-stabilizing threshold. We provide a pseudobinary phase diagram of the DPPC-MSPC system and structural and volumetric data for the interdigitated phase.

Lysolipids such as lauroyl, myristoyl, and palmitoyl lysophosphatidylcholine (LPC) insert into the outer leaflet of liposomes but do not flip to the inner leaflet over many hours. This way, they create asymmetry stress between the intrinsic areas of the two leaflets. We have studied how this stress is relaxed with particular emphasis on the budding and fission of small (diameter 20-30 nm) daughter vesicles (DVs). Asymmetric flow field-flow fractionation was utilized to quantify the extent of budding from large unilamellar vesicles after exposure to LPC. Budding starts at a low threshold of the order of 2 mol% LPC in the outer (and ≈0 mol% LPC in the inner) leaflet. We see reason to assume that the fractional fluorescence intensity from DVs is a good approximation for the fraction of membrane lipid, POPC, transferred into DVs. Accordingly, budding starts with a "budding power" of ≈6 POPC molecules budding off per LPC added, corresponding to a more than 10-fold accumulation of LPC in the outer leaflet of DVs to ≈24 mol%. As long as budding is possible, little strain is built up in the membranes, a claim supported by the lack of changes in limiting fluorescence anisotropy, rotational correlation time, and fluorescence lifetime of symmetrically and asymmetrically inserted TMA-DPH. At physiological osmolarity, budding is typically limited to 20-30% of budded fraction with some batch-to-batch variation, but independent of the LPC species. We hypothesize that the budding limit is determined by the excess area of the liposomes upon preparation, which is then used up upon budding given the larger area-to-volume ratio of smaller liposomes. As the mother vesicles approach ideal spheres, budding must stop. This is qualitatively supported by increased and decreased budding limits of osmotically predeflated and preinflated vesicles, respectively., Competing Interests: Declaration of interests The authors declare no competing interests., (Copyright © 2023 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

Cyclic lipopeptides (CLiPs) have many biological functions, including the selective permeabilization of target membranes, and technical and medical applications. We studied the anionic CLiP viscosin from Pseudomonas along with a neutral analog, pseudodesmin A, and the cationic viscosin-E2K to better understand electrostatic effects on target selectivity. Calcein leakage from liposomes of anionic phosphatidylglycerol (PG) and phosphatidylethanolamine (PE) is measured in comparison with net-neutral phosphatidylcholine by time-resolved fluorescence. By contrast to the typical selectivity of cationic peptides against anionic membranes, we find viscosin more active against PG/PE at 30 μM lipid than viscosin-E2K. At very low lipid concentration, the selectivity is reversed. An equi-activity analysis reveals the reciprocal partition coefficients, 1/K, and the CLiP-to-lipid mole ratio within the membrane as leakage after 1 h reaches 50%, R e 50 . As expected, 1/K to PG/PE is much lower (higher affinity) for viscosin-E2K (3 μM) than viscosin (15 μM). However, the local damage to the PG/PE membrane caused by a viscosin molecule is much stronger than that of viscosin-E2K. This can be explained by the strong membrane expansion due to PG/viscosin repulsion inducing asymmetry stress between the two leaflets and, ultimately, transient limited leakage at R e 50  = 0.08. PG/viscosin-E2K attraction opposes expansion and leakage starts only as the PG charges in the outer leaflet are essentially compensated by the cationic peptide (R e 50  = 0.32). In the high-lipid regime (at lipid concentrations c L ≫ 1/K), virtually all CLiP is membrane bound anyway and R e 50 governs selectivity, favoring viscosin. In the low-lipid regime at c L ≪ 1/K, virtually all CLiP is in solution, 1/K becomes important and the "cation attacks anionic membrane" selectivity gets restored. Overall, activity and selectivity data can only properly be interpreted if the lipid regime is known and predictions for other lipid concentrations or cell counts require knowledge of 1/K and R e 50 ., Competing Interests: Declaration of interests The authors declare no competing interests., (Copyright © 2022 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

Liposomes are prevalent model systems for studies on biological membranes. Recently, increasing attention has been paid to models also representing the lipid asymmetry of biological membranes. Here, we review in-vitro methods that have been established to prepare free-floating vesicles containing different compositions of the classic two-chain glycero- or sphingolipids in their outer and inner leaflet. In total, 72 reports are listed and assigned to four general strategies that are (A) enzymatic conversion of outer leaflet lipids, (B) re-sorting of lipids between leaflets, (C) assembly from different monolayers and (D) exchange of outer leaflet lipids. To guide the reader through this broad field of available techniques, we attempt to draw a road map that leads to the lipid-asymmetric vesicles that suit a given purpose. Of each method, we discuss advantages and limitations. In addition, various verification strategies of asymmetry as well as the role of cholesterol are briefly discussed. The ability to specifically induce lipid asymmetry in model membranes offers insights into the biological functions of asymmetry and may also benefit the technical applications of liposomes.

Dual centrifugation (DC) is a new and versatile technique for the preparation of liposomes by in-vial homogenization of lipid-water mixtures. Size, size distribution, and entrapping efficiencies are strongly dependent on the lipid concentration during DC-homogenization. In this study, we investigated the detailed structure of DC-made liposomes. To do so, an assay to determine the ratio of inner to total membrane surfaces of liposomes (inaccessible surface) was developed based on either time-resolved or steady-state fluorescence spectroscopy. In addition, cryogenic electron microscopy (cryo-EM) was used to confirm the lamellarity results and learn more about liposome morphology. One striking result leads to the possibility of producing a novel type of liposome-small multilamellar vesicles (SMVs) with low PDI, sizes of the order of 100 nm, and almost completely filled with bilayers. A second particularly important finding is that VPGs can be prepared to contain open bilayer structures that will close spontaneously when, after storage, more aqueous phase is added and liposomes are formed. Through this process, a drug can effectively be entrapped immediately before application. In addition, dual centrifugation at lower lipid concentrations is found to produce predominantly unilamellar vesicles.

Tolaasin II is an amphiphilic, membrane-active, cyclic lipopeptide produced by Pseudomonas tolaasii and is responsible for brown blotch disease in mushroom. To better understand the mode of action and membrane selectivity of tolaasin II and related lipopeptides, its permeabilizing effect on liposomes of different membrane thickness was characterized. An equi-activity analysis served to distinguish between the effects of membrane partitioning and the intrinsic activity of the membrane-bound peptide. It was found that thicker membranes require higher local peptide concentrations to become leaky. More specifically, the mole ratio of membrane-bound peptide per lipid needed to induce 50% leakage of calcein within 1 h, R e 50 , increased monotonically with membrane thickness from 0.0016 for the 14:1 to 0.0070 for the 20:1 lipid-chains. Moreover, fast but limited leakage kinetics in the low-lipid regime were observed implying a mode of action based on membrane asymmetry stress in this time and concentration window. While the assembly of the peptide to oligomeric pores of defined length along the bilayer z -axis can in principle explain inhibition by increasing membrane thickness, it cannot account for the observed limited leakage. Therefore, reduced intrinsic membrane-permeabilizing activity with increasing membrane thickness is attributed here to the increased mechanical strength and order of thicker membranes., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Steigenberger, Mergen, De Roo, Geudens, Martins and Heerklotz.)

Mixed micellar drug delivery systems for poorly soluble active pharmaceutical ingredients (APIs) are easy to produce and long-term stable, because they represent equilibrium structures. However, their fate after intravenous injection is still largely unknown. Once injected into the bloodstream, they can potentially convert to vesicles or disappear altogether, with both API and excipients being picked up by blood components. Our study aimed at reducing the gap between the good, quantitative understanding of aqueous glycocholate (GC)-lecithin dispersions alone and the highly complex situation in the blood. To this end, we extended the pseudophase model previously established for lipid-detergent dispersions to include the detergent-binding protein albumin as another component. The model predicted a quaternary phase diagram with planar phase boundaries defined by key parameters of the ternary subsystems, which were then determined by isothermal titration calorimetry. They include the aqueous GC concentration upon bilayer-micelle coexistence, 5.2 mM, the GC-to-lipid mole ratios in coexisting bilayers ( R e sat = 0.2) and micelles ( R e sol = 0.7), as well as the capacity of the albumin to bind 0.1 GC molecules with a dissociation constant of K D = 0.1 mM and 6 GC molecules with K D = 0.7 mM. Subsequent measurements in the quaternary system showed phase boundaries in good agreement with the model predictions. In addition, the critical micelle concentration of GC shows a minimal value (midpoint of transition) of 9.1 mM at the temperature of 24 °C where the demicellization enthalpy is zero. The demicellization process is accompanied by a heat capacity change of 29 cal/mol K. The model improves the understanding of the mixed micellar drug delivery systems. The success of the approach encourages including even more blood components, like lipoproteins, to a quantitative treatment.

Many membrane proteins utilize dimerization to transmit signals across the cell membrane via regulation of the lateral binding affinity. The complexity of natural membrane proteins hampers the understanding of this regulation on a biophysical level. We designed simplified membrane proteins from well-defined soluble dimerization domains with tunable affinities, flexible linkers, and an inert membrane anchor. Live-cell single-molecule imaging demonstrates that their dimerization affinity indeed depends on the strength of their binding domains. We confirm that as predicted, the 2-dimensional affinity increases with the 3-dimensional binding affinity of the binding domains and decreases with linker lengths. Models of extended and coiled linkers delineate an expected range of 2-dimensional affinities, and our observations for proteins with medium binding strength agree well with the models. Our work helps in understanding the function of membrane proteins and has important implications for the design of synthetic receptors.

Dual centrifugation (DC) is a novel in-vial homogenization technique for the preparation of liposomes in small batch sizes under gentle and sterile conditions which allows encapsulation efficiencies ( EE ) for water soluble compounds of >50%. Since liposome size, size distribution (PDI), and EE depend on the lipid concentration used in the DC process, a screening method to find optimal lipid concentrations for a defined lipid composition was developed. Four lipid mixtures consisting of cholesterol, hydrogenated or non-hydrogenated egg PC, and/or PEG-DSPE were screened and suitable concentration ranges could be identified for optimal DC homogenization. In addition to the very fast and parallel liposome preparation of up to 40 samples, the screening process was further accelerated by the finding that DC generates homogeneously mixed liposomes from a macroscopic lipid mixture without the need to initially prepare a molecularly mixed lipid film from an organic solution of all components. This much simpler procedure even works for cholesterol containing lipid blends, which could be explained by a nano-milling of the cholesterol crystals during DC homogenization. Furthermore, EE determination was performed by time-resolved fluorescence measurements of calcein-loaded liposomes without removing the non-entrapped calcein. The new strategy allows the rapid characterization of a certain lipid composition for the preparation of liposomes within a working day.

Many newly developed drugs suffer from poor water solubility and low bioavailability and hence, need special formulation vehicles like vesicular or micellar drug delivery systems. The knowledge of their membrane-water partition coefficient K becomes critical as is governs drug loading and release from the vehicle, as well as absorption into the body. The dilemma is that measuring K is particularly challenging for these very compounds. Here we establish a strategy to resolve this problem. We added DMSO to shift K and solubility into a convenient range and extrapolated these results back to zero-DMSO. Isothermal titration calorimetry revealed that logK of the kinase inhibitor Lapatinib decreased proportionally to DMSO content (2.5 - 20v%) with a slope of -1/20v% (m value = 28 kJ/mol). This implies a K of 84 mM -1 in DMSO-free buffer. This strategy should be transferable to other poorly soluble drugs and further detection methods., (Copyright © 2021 The Authors. Published by Elsevier B.V. All rights reserved.)

Pseudodesmin A (PSD) is a cyclic lipodepsipeptide produced by Pseudomonas that kills certain bacteria at MIC 1/2 in the single micromolar range, probably by permeabilizing their cellular membranes. Synthetic PSD variants, where the native decanoic (C10) acyl chain is varied in length from C4 to C8 and C12 to C14 carbons, were described to be not or less active against a panel of gram-positive strains, as compared to native PSD-C10. Here, we test the membrane-permeabilizing activity of PSD-C4 through PSD-C14 in terms of calcein release from liposomes, which is characterized in detail by the fluorescence-lifetime based leakage assay. Antagonistic concentrations and their chain length dependence agree well for liposome leakage and antimicrobial activity. The optimal chain length is governed by a balance between membrane partitioning (favoring longer chains) and the local perturbation or "damage" inflicted by a membrane-bound molecule (weakening for longer chains). Local perturbation, in turn, may involve at least two modes of action. Asymmetry stress between outer and inner leaflet builds up as the lipopeptides enter the outer leaflet and when it reaches a system-specific stability threshold, it causes a transient membrane failure that allows for the flip of some molecules from the outer to the inner leaflet. This cracking-in may be accompanied by transient, incomplete leakage from the aqueous cores of the liposomes observed, typically, for some seconds or less. The mismatch of the lipopeptide with the lipid leaflet geometry, expressed for example in terms of a spontaneous curvature, has two effects. First, it affects the threshold for transient leakage as described. Second, it controls the rate of equilibrium leakage proceeding as the lipopeptide has reached sufficient local concentrations in both leaflets to form quasi-toroidal defects or pores. Both modes of action, transient and equilibrium leakage, synergize for intermediate chain lengths such as the native, i.e., for PSD-C10. These mechanisms may also account for the reported chain-length dependent specificities of antibiotic action against the target bacteria., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Steigenberger, Verleysen, Geudens, Martins and Heerklotz.)

Polysorbates (PSs, Tweens) are widely used surfactant products consisting of a sorbitan ring connecting up to four ethylene oxide (EO) chains of variable lengths, one or more of which are esterified with fatty acids of variable lengths and saturation degrees. Pharmaceutical applications include the stabilization of biologicals in solutions and the solubilization of poorly water soluble, active ingredients. This study characterizes the complex association behavior of compendial PSs PS20 and PS80, which is fundamentally different from that of single-component surfactants. To this end, a series of demicellization experiments of isothermal titration calorimetry with different PS concentrations are evaluated. Their experiment-dependent heats of titration are converted into a common function of the state of a sample, the micellar enthalpy Q m ( c ). These functions demonstrate that initial micelles are already present at the lowest concentrations investigated, 2 μM for PS20 and 10 μM for PS80. Initial micelles consist primarily of the surfactant species with the lowest individual critical micelle concentration (cmc). With increasing concentration, the other PS species gradually enter these micelles in the sequence of increasing individual cmc's and hydrophilic-lipophilic balance. Concentration ranges with pronounced slopes of Q m ( c ) can be tentatively assigned to the uptake of the major components of the PS products. Micellization and the variation of the micelle properties progress up to at least 10 mM PS. That means the published cmc values or ranges of PS20 and PS80 may be related to certain, major components being incorporated into and forming specific micelles but must not be interpreted in terms of an absence of micelles below and constant properties, e.g., the surface activity, of the micelles above these ranges. The micellization enthalpy curves differ quite substantially between PS20 and PS80 and, in a subtler fashion, between individual quality grades such as high purity, pure lauric acid/pure oleic acid, super-refined, and China grade.

Studies have demonstrated the advantages associated with heat-triggered drug delivery via thermosensitive liposomes for the treatment of localized cancer. Challenges that traditional liposomal systems face such as limited drug release and homogeneous distribution throughout the region of interest can potentially be overcome when triggering intravascular drug release. The most prominent example is a thermosensitive liposome formulation of doxorubicin known as ThermoDox®. Many other drugs may benefit from the same targeted and localized delivery approach using thermosensitive liposomes as it can result in a significant improvement in the therapeutic index. Vinorelbine is a semi-synthetic vinca alkaloid which has shown to be active in a broad range of cancers. Several liposome formulations encapsulating vinorelbine have been developed as a means to reduce systemic drug exposure. The present study takes a systematic approach in exploring formulation and drug loading parameters and their influence on performance characteristics of a rapidly releasing thermosensitive liposome formulation of vinorelbine. More broadly, this study shows that trends observed for non-thermosensitive liposome formulations of specific drugs (i.e. vinorelbine) can not be easily translated to their thermosensitive counterparts. The profound impact of the presence of albumin on stability and in vitro release is also highlighted. This is of significance given that a number of recent reports examine drug release in the absence of biologically relevant components. As a result, a strong recommendation emanating from this is a thorough challenge of the liposome formulation in vitro in order to gain a better understanding of its likely behaviour in vivo as well as potential for future clinical translation., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The functional roles of the lipid asymmetry of biomembranes are attracting increasing attention. This study characterizes the activity of surfactants to induce transmembrane flip-flop of lipids and thus "scramble" this asymmetry. Detergent-induced lipid scrambling of liposomes mimicking the charge asymmetry of bacterial membranes with 20 mol % of 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-rac-glycerol in the outer leaflet only was quantified by ζ-potential measurements for octaethylene glycol dodecyl ether (C 12 EO 8 ), octyl glucoside (OG), and dodecyl maltoside. Membrane leakage was separately measured by the fluorescence lifetime-based calcein leakage assay and the onset of the membrane-to-micelle transition by isothermal titration calorimetry. Partition coefficients and partial molar areas were obtained as well. For the quickly membrane-permeant C 12 EO 8 and OG, leakage proceeds at a rather sharp threshold content in the membrane, which is well below the onset of solubilization and little dependent on incubation time; it is accompanied by fast lipid scrambling. However, unlike leakage, flip-flop is a relaxation process that speeds up gradually from taking weeks in the detergent-free membrane to minutes or less in the leaking membrane. Hence, after 24 h of incubation, 10 mol % of C 12 EO 8 or 50 mol % of OG in the membrane suffice for virtually complete lipid scrambling, whereas leakage remains below 10% for up to 14 mol % of C 12 EO 8 and 88 mol % of OG. There is thus a concentration window in which lipid scrambling proceeds without leakage. This implies that lipid scrambling must be considered a possible mode of action of antimicrobial peptides and other membrane-active drugs or biomolecules. A related, detergent-based protocol for scrambling the lipid asymmetry of liposomes and maybe cells without compromising their overall integrity would be a very valuable tool to study functions of lipid asymmetry., (Copyright © 2020 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

The interactions of exenatide, a Trp-containing peptide used as a drug to treat diabetes, with liposomes were studied by isothermal titration calorimetry (ITC), tryptophan (Trp) fluorescence, and microscale thermophoresis measurements. The results are not only important for better understanding the release of this specific drug from vesicular phospholipid gel formulations but describe a general scenario as described before for various systems. This study introduces a model to fit these data on the basis of primary and secondary peptide-lipid interactions. Finally, resolving apparent inconsistencies between different methods aids the design and critical interpretation of binding experiments in general. Our results show that the net cationic exenatide adsorbs electrostatically to liposomes containing anionic diacyl phosphatidylglycerol lipids (PG); however, the ITC data could not properly be fitted by any established model. The combination of electrostatic adsorption of exenatide to the membrane surface and its self-association (K d  = 46 μM) suggested the possibility of secondary binding of peptide to the first, primarily (i.e., lipid-) bound peptide layer. A global fit of the ITC data validated this model and suggested one peptide to bind primarily per five PG molecules with a K d ≈ 0.2 μM for PC/PG 1:1 and 0.6 μM for PC/PG 7:3 liposomes. Secondary binding shows a weaker affinity and a less exothermic or even endothermic enthalpy change. Depending on the concentration of liposomes, secondary binding may also lead to liposomal aggregation as detected by dynamic light-scattering measurements. ITC quantifies primary and secondary binding separately, whereas microscale thermophoresis and Trp fluorescence represent a summary or average of both effects, possibly with the fluorescence data showing somewhat greater weighting of primary binding. Systems with secondary peptide-peptide association within the membrane are mathematically analogous to the adsorption discussed here., (Copyright © 2020 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

Calcineurin B homologous proteins (CHPs) belong to the EF-hand Ca 2+ -binding protein (EFCaBP) family. They have multiple important functions including the regulation of the Na + /H + exchanger 1 (NHE1). The human isoforms CHP1 and CHP2 share high sequence similarity, but have distinct expression profiles with CHP2 levels for instance increased in malignant cells. These CHPs bind Ca 2+ with high affinity. Biochemical data indicated that Ca 2+ can regulate their functions. Experimental evidence for Ca 2+ -modulated structural changes was lacking. With a newly established fluorescent probe hydrophobicity (FPH) assay, we detected Ca 2+ -induced conformational changes in both CHPs. These changes are in line with an opening of their hydrophobic pocket that binds the CHP-binding region (CBD) of NHE1. Whereas the pocket is closed in the absence of Ca 2+ in CHP2, it is still accessible for the dye in CHP1. Both CHPs interacted with CBD in the presence and absence of Ca 2+ . Isothermal titration calorimetry (ITC) analysis revealed high binding affinity for both CHPs to CBD with equilibrium dissociation constants (K D s) in the nanomolar range. The K D for CHP1:CBD was not affected by Ca 2+ , whereas Ca 2+ -depletion increased the K D 7-fold for CHP2:CBD showing a decreased affinity. The data indicate an isoform specific regulatory interaction of CHP1 and CHP2 with NHE1., (© 2020 The Authors. The FASEB Journal published by Wiley Periodicals, Inc. on behalf of Federation of American Societies for Experimental Biology.)

Membrane proteins are embedded in a complex lipid environment that influences their structure and function. One key feature of nearly all biological membranes is a distinct lipid asymmetry. However, the influence of membrane asymmetry on proteins is poorly understood, and novel asymmetric proteoliposome systems are beneficial. To our knowledge, we present the first study on a multispanning protein incorporated in large unilamellar liposomes showing a stable lipid asymmetry. These asymmetric proteoliposomes contain the Na + /H + antiporter NhaA from Salmonella Typhimurium. Asymmetry was introduced by partial, outside-only exchange of anionic phosphatidylglycerol (PG), mimicking this key asymmetry of bacterial membranes. Outer-leaflet and total fractions of PG were determined via ζ-potential (ζ) measurements after lipid exchange and after scrambling of asymmetry. ζ-Values were in good agreement with exclusive outside localization of PG. The electrogenic Na + /H + antiporter was active in asymmetric liposomes, and it can be concluded that reconstitution and generation of asymmetry were successful. Lipid asymmetry was stable for more than 7 days at 23°C and thus enabled characterization of the Na + /H + antiporter in an asymmetric lipid environment. We present and validate a simple five-step protocol that addresses key steps to be taken and pitfalls to be avoided for the preparation of asymmetric proteoliposomes: 1) optimization of desired lipid composition, 2) detergent-mediated protein reconstitution with subsequent detergent removal, 3) generation of lipid asymmetry by partial exchange of outer-leaflet lipid, 4) verification of lipid asymmetry and stability, and 5) determination of protein activity in the asymmetric lipid environment. This work offers guidance in designing asymmetric proteoliposomes that will enable researchers to compare functional and structural properties of membrane proteins in symmetric and asymmetric lipid environments., (Copyright © 2019 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

Lipid asymmetries between the outer and inner leaflet of the lipid bilayer exist in nearly all biological membranes. Although living cells spend great effort to adjust and maintain these asymmetries, little is known about the biophysical phenomena within asymmetric membranes and their role in cellular function. One reason for this lack of insight into such a fundamental membrane property is the fact that the majority of model-membrane studies have been performed on symmetric membranes. Our aim is to overcome this problem by employing a targeted, enzymatic reaction to prepare asymmetric liposomes with phosphatidylserine (PS) primarily in the inner leaflet. To achieve this goal, we use a recombinant version of a water soluble PS decarboxylase from Plasmodium knowlesi, which selectively decarboxylates PS in the outer leaflet, converting it to phosphatidylethanolamine. The extent of decarboxylation is quantified using high-performance thin-layer chromatography, and the local concentration of anionic PS in the outer leaflet is monitored in terms of the ζ potential. Starting, for example, with 21 mol % 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-L-serine sodium salt, the assay leads to liposomes with 21 mol % in the inner and 6 mol % PS in the outer leaflet. This asymmetry persists virtually unchanged for at least 4 days at 20°C and at least 2 days at 40°C. The use of a highly specific enzyme carries the advantage that a minor component such as PS can be adjusted without affecting or being affected by the other lipid species present in the model membrane. The phenomena governing the residual outside PS content are addressed but warrant further study., (Copyright © 2018 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

The Na + /H + exchanger NHE1 is critical for cell vitality as it controls intracellular pH and cell volume. Its functionality is influenced by calcineurin B homologous proteins (CHPs). The human isoform CHP3 is important for transport of NHE1 to the plasma membrane and for its activity. Here, we characterized the binding interaction of human CHP3 with the regulatory domain of NHE1. The exact binding site of CHP3 was previously debated. CHP3 as well as both regions of NHE1 in question were produced and purified. CHP3 specifically formed stable complexes with the CHP-binding region (CBD) of NHE1 (residues 503-545) in size-exclusion chromatography (SEC), but not with the C-terminal region (CTD, residues 633-815). CTD was functional as shown by Ca 2+ -dependent binding of calmodulin in SEC analysis. CHP3 bound with high affinity to CBD with an equilibrium dissociation constant (K D ) of 56 nM determined by microscale thermophoresis. The high affinity was substantiated by isothermal calorimetry analysis (K D  = 3 nM), which also revealed that the interaction with CBD is strongly exothermic (ΔG° = -48.6 kJ/mol, ΔH = -75.3 kJ/mol, -TΔS° = 26.7 kJ/mol). The data provide insights in the molecular mechanisms that underlie the regulatory interaction of CHP3 and NHE1 and more general of calcineurin homologous proteins with their target proteins.

The asymmetric distribution of lipids between the two bilayer leaflets represents a typical feature of biological membranes. The loss of this asymmetry, for example the exposure of negatively charged lipids on the extracellular membrane leaflet of mammalian cells, is involved in apoptosis and occurs in tumor cells. Thus, the controlled production of asymmetric liposomes helps to better understand such crucial cellular processes. Here, we present an approach that allows us to design asymmetric model-membrane experiments on a rational basis and predict the fraction of exchanged lipid. In addition, we developed a label-free and nondestructive assay to quantify the asymmetric uptake of negatively charged lipids in terms of the zeta potential. This significantly enhances the applicability, impact, and predictive power of model membranes.

The mode of action of membrane-active molecules, such as antimicrobial, anticancer, cell penetrating, and fusion peptides and their synthetic mimics, transfection agents, drug permeation enhancers, and biological signaling molecules (e.g., quorum sensing), involves either the general or local destabilization of the target membrane or the formation of defined, rather stable pores. Some effects aim at killing the cell, while others need to be limited in space and time to avoid serious damage. Biological tests reveal translocation of compounds and cell death but do not provide a detailed, mechanistic, and quantitative understanding of the modes of action and their molecular basis. Model membrane studies of membrane leakage have been used for decades to tackle this issue, but their interpretation in terms of biology has remained challenging and often quite limited. Here we compare two recent, powerful protocols to study model membrane leakage: the microscopic detection of dye influx into giant liposomes and time-correlated single photon counting experiments to characterize dye efflux from large unilamellar vesicles. A statistical treatment of both data sets does not only harmonize apparent discrepancies but also makes us aware of principal issues that have been confusing the interpretation of model membrane leakage data so far. Moreover, our study reveals a fundamental difference between nano- and microscale systems that needs to be taken into account when conclusions about microscale objects, such as cells, are drawn from nanoscale models.

Digitonin is commonly used to permeabilize cell membranes and solubilize membrane components. It interacts specifically with cholesterol in the membrane which leads to the formation of pores. Thus far, the mechanism by which digitonin interacts with the membrane has only been described qualitatively. We investigated this interaction in model membranes that contain little or no cholesterol with a combination of isothermal titration calorimetry, dynamic light scattering, and zeta potential measurements. Digitonin partitions fully asymmetrically into large unilamellar vesicles of phosphocholine (PC) lipid at 20°C (remaining in the outer leaflet only), with a partition coefficient of 0.22±0.04mM -1 and ΔH of partitioning of 23.3±1.6kJmol -1 . Beyond a digitonin/lipid ratio of ∼0.1 in the outer leaflet, digitonin micelles coexist with vesicles without solubilizing them-even at high digitonin concentrations. This "staying out" of digitonin was also observed with phosphoserine (PS), PC/PS, and PC/PS/cholesterol vesicles. The mechanism by which digitonin perturbs and solubilizes the membrane is very different when the membrane contains little or no cholesterol as opposed to 20-30mol% cholesterol. The role of digitonin should thus be carefully considered in the design of preparative protocols and experiments in studies of cellular processes and membrane proteins., (Copyright © 2017 Elsevier Inc. All rights reserved.)