Search

Your search keyword '"Heinrich, Gert"' showing total 1,389 results
Start Over Author "Heinrich, Gert"
1,389 results on '"Heinrich, Gert"'

2. 2D Transient Thermal Analytical Solution of the Heat Build-Up in Cyclically Loaded Rubber Cylinder

Author

Vaněk, Jiří, Peter, Ondřej, Heinrich, Gert, Stoček, Radek, Abe, Akihiro, Editorial Board Member, Albertsson, Ann-Christine, Editorial Board Member, Coates, Geoffrey W., Editorial Board Member, Genzer, Jan, Editorial Board Member, Kobayashi, Shiro, Editorial Board Member, Lee, Kwang-Sup, Editorial Board Member, Leibler, Ludwik, Editorial Board Member, Long, Timothy E., Editorial Board Member, Möller, Martin, Editorial Board Member, Okay, Oguz, Editorial Board Member, Percec, Virgil, Editorial Board Member, Tang, Ben Zhong, Editorial Board Member, Terentjev, Eugene M., Editorial Board Member, Theato, Patrick, Editorial Board Member, Voit, Brigitte, Editorial Board Member, Wiesner, Ulrich, Editorial Board Member, Zhang, Xi, Editorial Board Member, Heinrich, Gert, editor, Kipscholl, Reinhold, editor, Le Cam, Jean-Benoît, editor, and Stoček, Radek, editor

Published
2024
Full Text
View/download PDF

4. Basic Mechanisms and Predictive Testing of Tire-Road Abrasion

Author

Heinrich, Gert, Klüppel, Manfred, Abe, Akihiro, Editorial Board Member, Albertsson, Ann-Christine, Editorial Board Member, Coates, Geoffrey W., Editorial Board Member, Genzer, Jan, Editorial Board Member, Kobayashi, Shiro, Editorial Board Member, Lee, Kwang-Sup, Editorial Board Member, Leibler, Ludwik, Editorial Board Member, Long, Timothy E., Editorial Board Member, Möller, Martin, Editorial Board Member, Okay, Oguz, Editorial Board Member, Percec, Virgil, Editorial Board Member, Tang, Ben Zhong, Editorial Board Member, Terentjev, Eugene M., Editorial Board Member, Theato, Patrick, Editorial Board Member, Voit, Brigitte, Editorial Board Member, Wiesner, Ulrich, Editorial Board Member, Zhang, Xi, Editorial Board Member, Heinrich, Gert, editor, Kipscholl, Reinhold, editor, and Stoček, Radek, editor

Published
2023
Full Text
View/download PDF

10. Influence of weak reversible cross-linkers on entangled polymer melt dynamics

Author

Mateyisi, Mohau J., Sommer, Jens-Uwe, Müller-Nedebock, Kristian K., and Heinrich, Gert

Subjects
Condensed Matter - Soft Condensed Matter
Abstract

In this paper we study a system of entangled chains that bear reversible cross-links in a melt state. The cross-links are tethered uniformly on the backbone of each chain. A slip-link type model for the system is presented and solved for the relaxation modulus. The effects of entanglements and reversible cross-linkers are modelled as discrete form of constraints that influence the motion of the primitive path. In contrast to a non-associating entangled system the model calculations demonstrate that the elastic modulus has a much higher first plateau and a delayed terminal relaxation. These effects are attributed to the evolution of the entangled chains as influenced by tethered reversible linkers. The model is solved for the case when linker survival time $\tau_s$ is greater than the entanglement time $\tau_e$ but less than the Rouse time $\tau_R$.

Published
2017
Full Text
View/download PDF

11. How is cut and chip wear influenced by the variation of the cross-link density within the conventional vulcanization system of natural rubber?

Author

Pöschl, Marek, Stoček, Radek, Zádrapa, Petr, Stěnička, Martin, and Heinrich, Gert

Subjects
WEAR resistance, MECHANICAL wear, VULCANIZATION, TENSILE tests, HARDNESS
Abstract

This paper extends previous studies by the authors that aimed to describe the effect of apparent cross-link density (CLD) of the rubber polymer networks on the fracture mechanism caused by cut and chip (CC) wear of natural rubber (NR), demonstrating the positive effect of conventional vulcanization (CV). This work is focused on the determination of the effect of CLD while keeping constant the accelerator-to-sulfur ratio A/S = 0.2, typical for CV systems. For this ratio, different sulfur quantities were chosen, and the concentration of the accelerator N-tert-butyl-benzothiazole sulphonamide (TBBS) was calculated to achieve CLDs in a range from 35 to 524 μmol·cm–3. Standard analyses such as tensile tests, hardness, rebound resilience and DIN abrasion were performed. From these analyses, the optimum physical properties of the NR-based rubber were estimated to be in the CLD range of approximately 60 to 160 μmol·cm–3. A CC wear analysis was performed with an Instrumented cut and chip analyzer (ICCA) and it was found that the highest CC wear resistance of the NR is in the CLD range of 35 to 100 μmol·cm–3. Furthermore, the effect of straininduced crystallization (SIC) of NR on CC wear and its dependence on the CLD region was discussed. For the first time, we determine a CLD range for a CV system in which the material achieves both optimal mechanical properties and CC wear resistance. [ABSTRACT FROM AUTHOR]

Published
2024
Full Text
View/download PDF

15. Polydimethylsiloxane based polyurethane and its composite with layered double hydroxide: Synthesis and its thermal properties

Author

Saha, Chinmoy, Ponnupandian, Siva, Costa, Francis R., Heinrich, Gert, and Singha, Nikhil K.

Subjects
Polyurethanes -- Chemical properties -- Production processes, Dimethylpolysiloxane -- Usage, Engineering and manufacturing industries, Science and technology
Abstract

This investigation reports the synthesis of a new class of polyurethane (PU) based on bis(hydroxyalkyl) polydimethylsiloxane (PDMS) as diol and isophorone diisocyanate as diisocyanate followed by the preparation of PU/layered double hydroxide (PU/LDH) nanocomposite via ex-situ technique. Nuclear magnetic resonance and Fourier-transform infrared spectroscopy studies confirm the formation of PU and incorporation of PDMS into the PU backbone. Thermogravimetry analysis revealed that thermal stability of the composite improves significantly with incorporation of LDH into the PU matrix. This may be accredited to the barrier effect rendered by the LDH layers. Differential scanning calorimetry study reveals that with the incorporation of LDH, glass transition temperature ([T.sub.g]) of the composite increases for an optimum level of loading beyond which it remains constant. KEYWORDS composite, layered double hydroxide, polydimethylsiloxane, polyurethanes, thermal property, 1 | INTRODUCTION Polyurethanes (PUs) are one of the most significant class of polymeric materials which have wide spread applications due to its diversified properties. [1] Despite of several advancements [...]

Published
2021
Full Text
View/download PDF

27. Moving least‐squares aided finite element method: A powerful means to predict flow fields in the presence of a solid part.

Author

Mostafaiyan, Mehdi, Wießner, Sven, and Heinrich, Gert

Subjects
FINITE element method
Abstract

With the assistance of the moving least‐squares (MLS) interpolation functions, a two‐dimensional finite element code is developed to consider the effects of a stationary or moving solid body in a flow domain. At the same time, the mesh or grid is independent of the shape of the solid body. We achieve this goal in two steps. In the first step, we use MLS interpolants to enhance the pressure (P) and velocity (V) shape functions. By this means, we capture different discontinuities in a flow domain. In our previous publications, we have named this technique the PVMLS method (pressure and velocity shape functions enhanced by the MLS interpolants) and described it thoroughly. In the second step, we modify the PVMLS method (the M‐PVMLS method) to consider the effect of a solid part(s) in a flow domain. To evaluate the new method's performance, we compare the results of the M‐PVMLS method with a finite element code that uses boundary‐fitted meshes. [ABSTRACT FROM AUTHOR]

Published
2024
Full Text
View/download PDF

Catalog

Books, media, physical & digital resources
See catalog results