Search

Understanding the components of water consumption plays a critical role in agricultural management in arid regions. This study aimed to analyze the characteristics of the components of the water consumption of winter wheat on the Loess Plateau in China to investigate their effects on yield and water use efficiency (WUE). Winter wheat observation data were collected from 1981 to 2020 at the Xifeng Agrometeorological Station on the Loess Plateau. The results show that over the past 40 years, the average water consumption of the winter wheat fields was 315 mm, but there were large differences between years. The soil water was first converted from precipitation (P) during the growing season, accounting for 69.4%, and then consumed via soil water storage (ΔW) in the fallow period, accounting for 30.6%. The yield of winter wheat varied from 1057 to 6914 kg·ha−1. The correlation between winter wheat yield and P during the growth period was stronger than the correlation between winter wheat yield and ΔW. The average WUE was 11.0 kg·ha−1·mm−1 from 1981 to 2020, with the highest value of 13.7 kg·ha−1·mm−1 occurring in the 2010s and the lowest value of 9.6 kg·ha−1·mm−1 occurring in the 2000s. The WUE was positively correlated with P (p < 0.01) during the growth period and negatively correlated with ΔW (p < 0.05). Therefore, P can increase yield and WUE more effectively than ΔW. These findings provide a theoretical basis for the efficient utilization of water resources on the Loess Plateau and the sustainable development of dry farming.

Ridge-furrow rainwater harvesting (RFRH) is known to be effective in controlling water loss and soil erosion, and increasing soil moisture and crop yield in semiarid regions. However, it can cause waterlogging, ridge overtopping, and harvest failure if not properly designed. A four consecutive-year field trial was carried out to assess the impacts of various slope gradients and tillage practices on soil moisture, runoff, sediment yield, associated soil nutrient losses, fodder yield, and water use efficiency (WUE) of alfalfa in the Loess Plateau, China. The trial adopted a split-plot design, taking slope gradient (5° and 10°) as main plot treatment and tillage practice (traditional tillage, open-ridging, and tied-ridging) as split-plot treatment, from 2015 to 2018. There were greater variations in runoff, sediment yield, and associated soil nutrient losses than in fodder yield and WUE. Tied-ridging and open-ridging resulted in decreased runoff and reduced sediment transport and associated soil nutrient losses, and increased soil moisture, fodder yield, and WUE. Runoff, sediment transport, and associated soil nutrient losses inclined with increasing slope; while fodder yield and the WUE declined. For slopes of 5° and 10°, the average decrease in runoff, sediment yield, total nitrogen, total phosphorus, and organic matter losses for open-ridging were 47.7–56.2%, 91.0–92.7%, 90.4–93.1%, 90.1–92.2%, and 88.9–90.2%, respectively, while these for tied-ridging were 62.4–68.4%, 94.5–96.4%, 93.6–95.5%, 93.9–95.9%, and 93.0–94.9%, over 4 years as compared with traditional tillage. The mean annual runoff, sediment, total nitrogen, total phosphorus, and organic matter losses for slopes of 10° were 1.31, 1.96, 1.87, 1.99, and 1.64 times greater than the corresponding values for slopes of 5°, respectively. The increase of fodder yield and WUE for open-ridging and tied-ridging was 40.1–45.6% and 16.0–17.5%, and 3.66–5.99 and 1.35–2.50 kg ha−1 mm−1, respectively, for slopes of 5° and 10°. The average fodder yield and WUE for slopes of 5° were 1.19 and 1.23 times greater than corresponding values for slopes of 10°, respectively. The disparities in fodder yield and WUE of alfalfa between slopes of 5° and 10° were not clear in dry years, but were evident in wet years. Tied-ridging was recommended for water and soil conservation, while open-ridging was recommended for increase of fodder yield and WUE of alfalfa. The implementation of RFRH in crop production should be evaluated by the use of a model in accordance with climatic conditions, soil type, and plant species.

Understanding environmental determination of crop yield plays a critical role in agricultural. management in resource-limited areas. The climatic transition zone was a naturally ideal place to study. the relations between environmental factors and crop yield, due to its large annual variability of climatic factors and high speed of temperature increase under global warming. Our objectives were to identify the most critical environmental factor in determining spring wheat yield and analyze the convergence and divergence of water-yield relations for spring wheat in a typical climatic transition zone (semi-arid area). The study was conducted at two locations, Dingxi and Pengyang in Northwest China, with a long-term experiment (1987-2018) and two short-term irrigation experiments. Meanwhile, data of water use and spring wheat yield was collected from a series of previously published literature in the study area. The highest spring wheat yield was obtained under year pattern with higher soil water content at sowing (SWCS) and lower atmospheric dryness condition (ADC, the difference between reference evapotranspiration and precipitation during spring wheat growing season). SWCS was more important than precipitation during the growing season (PGS) in determining spring wheat yield in the study area. The relations between available water supply, water use, and spring wheat yield were convergence. However, SWCS had an impact on the relationship between yield and PGS and SWCS-yield relation was affected by ADC. We concluded that precipitation in 7 months before sowing was the dominant factor determining spring wheat yield in the climatic transition zone under global warming whereas the impact of high atmospheric evaporative demand resulted from the increasing temperature on crop yields and SWCS-yield relation must be taken into account for the analysis of environmental determination of spring wheat yield.

This paper presents the multi-directional vibration behaviors of buckled viscoelastic nanoribbons based on the nonlocal theory containing scale effect, where the Lagrange’s motion equation is introduced to construct the nonlocal viscoelastic governing equation. The first-order transverse vibration mode and the first-order longitudinal vibration mode are considered to study the influences of the scale characteristics on the natural frequency of two different vibration modes. The Kelvin–Voigt model is used to characterize the material viscoelastic property, and an analytical method is presented to solve the nonlocal viscoelastic vibration behaviors of the buckled nanoribbon containing scale effect. Results show that the scale effect could decrease the natural frequency of buckled nanoribbon with viscoelastic behavior, as well as the half bandwidth during forced vibration. The presented results may be taken as a useful reference for the fabrications and applications of buckled nanostructures-based sensors & actuators, electronics, energy harvesters, etc.

Considering the potential applications of the buckled structures as nanomechanical mass sensors, this paper presents an analytical method to solve the frequency shifts of the first-order transverse and longitudinal vibration modes when a mass attaches on the surface of a buckled nanoribbon based on the nonlocal elastic theory and the Lagrange's motion equation. The first-order transverse and longitudinal vibration modes of the buckled nanoribbon are introduced. A comparison between the analytic solution and the finite element analysis (FEA) is presented. Then, the effects of the compressive strain, the magnitude and location of attached mass, the nonlocal parameter, and attached mass numbers on the frequency shifts are presented. From example calculations, it is seen that the magnitude of attached mass increases the frequency shifts of the first-order modes, except the first-order transverse vibration mode at the location Z1=0. The frequency shifts for the first-order transverse and longitudinal vibration modes are different, and could be used as important principles in mass sensing. What's more, the compressive strain and the nonlocal parameter play significant roles on the sensing process of the buckled nanoribbon. The results could serve as useful references for the fabrications and applications of buckled structures based nanomechanical mass sensors.

The real-time characterization of thin film properties can provide insights into the behavior of film material during process such as phase-transition, hydration, and chemical reaction. The shift of reasonant frequency in structural vibration serves as the basis of an effective approach to determine film properties, but encounters the difficulty that multiple to-be-determined quantites (e.g., film modulus and density) are often related to the resonant frequency simultaneously and therefore cannot be determined by a structure with fixed shape and vibration mode. Determinsitic mechanical buckling provides an effective route for the vibrational structure to rapidly switch between designed shapes and vibration modes. Here, we adopt a ribbon structure in the flat state and buckled state to yield two distinct vibration modes. Theoretical models of the natural frequencies are established for first-order out-of-plane modes of the ribbon with patterned thin films in these two states, respectively. The model suggests that with optimized film pattern the sensitivity of the natural frequencies to the film modulus and density can be partially decoupled. The results lead to a simple and effective method based on tunable vibration to characterize the thin film modulus and density at small scale.

Dynamic shape-morphing soft materials systems are ubiquitous in living organisms; they are also of rapidly increasing relevance to emerging technologies in soft machines, flexible electronics, and smart medicines. Soft matter equipped with responsive components can switch between designed shapes or structures, but cannot support the types of dynamic morphing capabilities needed to reproduce natural, continuous processes of interest for many applications. Challenges lie in the development of schemes to reprogram target shapes post fabrication, especially when complexities associated with the operating physics and disturbances from the environment can prohibit the use of deterministic theoretical models to guide inverse design and control strategies. Here, we present a mechanical metasurface constructed from a matrix of filamentary metal traces, driven by reprogrammable, distributed Lorentz forces that follow from passage of electrical currents in the presence of a static magnetic field. The resulting system demonstrates complex, dynamic morphing capabilities with response times within 0.1 s. Implementing an in-situ stereo-imaging feedback strategy with a digitally controlled actuation scheme guided by an optimization algorithm, yields surfaces that can self-evolve into a wide range of 3-dimensional (3D) target shapes with high precision, including an ability to morph against extrinsic or intrinsic perturbations. These concepts support a data-driven approach to the design of dynamic, soft matter, with many unique characteristics., 15 pages, 5 figures

Accurate measurements of skin hydration are of great interest to dermatological science and clinical practice. This parameter serves as a relevant surrogate of skin barrier function, a key representative benchmark for overall skin health. The skin hydration sensor (SHS) is a soft, skin-interfaced wireless system that exploits a thermal measurement method, as an alternative to conventional impedance-based hand-held probes. This study presents multiple strategies for maximizing the sensitivity and reliability of this previously reported SHS platform. An in-depth analysis of the thermal physics of the measurement process serves as the basis for structural optimizations of the electronics and the interface to the skin. Additional engineering advances eliminate variabilities associated with manual use of the device and with protocols for the measurement. The cumulative effect is an improvement in sensitivity by 135% and in repeatability by 36% over previously reported results. Pilot trials on more than 200 patients in a dermatology clinic validate the practical utility of the sensor for fast, reliable measurements.

Description, Mechanically guided assembly techniques yield complex 3D microvascular networks with multifunctional characteristics., Microfluidic technologies have wide-ranging applications in chemical analysis systems, drug delivery platforms, and artificial vascular networks. This latter area is particularly relevant to 3D cell cultures, engineered tissues, and artificial organs, where volumetric capabilities in fluid distribution are essential. Existing schemes for fabricating 3D microfluidic structures are constrained in realizing desired layout designs, producing physiologically relevant microvascular structures, and/or integrating active electronic/optoelectronic/microelectromechanical components for sensing and actuation. This paper presents a guided assembly approach that bypasses these limitations to yield complex 3D microvascular structures from 2D precursors that exploit the full sophistication of 2D fabrication methods. The capabilities extend to feature sizes

Direct-current generators, especially those based on the Schottky contacts between conductive polymers and metal electrodes, are efficient in converting mechanical stimuli into electrical energy. In contrast to triboelectric and piezoelectric generators, direct-current generators readily produce direct-current outputs and high currents that are crucial for integrating multiple energy-harvesting units in large scale and driving some types of devices. We are focusing on the relationship between Schottky barrier height and performance, systematically investigating the effects of various conductive polymers and electrodes on the outputs by both theoretical simulation and experiments. Tailoring the Schottky barrier height between conductive polymers and metal electrodes is demonstrated a significant approach to design the new DC generators. The preparation method of electrochemical deposition endows the generators flexibility, the linear relationship of current/voltage output vs. strain applied on the generators, combined with the large outputs offer advantages for the generator to work as flexible sensors. Furthermore, a mechanosensation-active matrix array based on direct-current generator for the strain monitoring demonstrated its promising prospects in flexible electronics. The direct-current generators with improved performance could serve as a stream new blood for versatile sensory systems and human-machine interactive interfaces.

Traditional methods to measure blood pressure are intermittent and may fail to detect the critical blood pressure fluctuations. Continuous blood pressure monitoring offers important clinical value in predicting cardiovascular diseases. Invasive (i.e., artery cannulation) and noninvasive approaches (e.g., volume clamping, pressure sensor, ultrasound, and optical methods) have limitations that prevent their generalized use outside of controlled settings, and few account properly for changes in the properties of the arteries (e.g., after drug administration, aging). This article proposes a method that combines a skin-interfaced pressure sensor with a sensor of pulse wave velocity, to continuously, noninvasively, and accurately measure the blood pressure, in ways that eliminate drifts and other artifacts that can prevent accurate, longitudinal monitoring. A scaling law is established to show that, for a linearly proportional relationship between the blood pressure and sensor pressure, the coefficient of proportionality depends on the elastic moduli Eartery and Etissue of the artery and tissue, respectively, and the artery thickness hartery and radius Rartery via a single, dimensionless combination, Earteryhartery/(EtissueRartery), i.e., the normalized artery stiffness. This scheme determines the blood pressure in a manner that explicitly accounts for changes in the artery elastic modulus and thickness (e.g., due to the administration of drugs, aging).

Tissue-on-chip systems represent promising platforms for monitoring and controlling tissue functions in vitro for various purposes in biomedical research. The two-dimensional (2D) layouts of these constructs constrain the types of interactions that can be studied and limit their relevance to three-dimensional (3D) tissues. The development of 3D electronic scaffolds and microphysiological devices with geometries and functions tailored to realistic 3D tissues has the potential to create important possibilities in advanced sensing and control. This study presents classes of compliant 3D frameworks that incorporate microscale strain sensors for high-sensitivity measurements of contractile forces of engineered optogenetic muscle tissue rings, supported by quantitative simulations. Compared with traditional approaches based on optical microscopy, these 3D mechanical frameworks and sensing systems can measure not only motions but also contractile forces with high accuracy and high temporal resolution. Results of active tension force measurements of engineered muscle rings under different stimulation conditions in long-term monitoring settings for over 5 wk and in response to various chemical and drug doses demonstrate the utility of such platforms in sensing and modulation of muscle and other tissues. Possibilities for applications range from drug screening and disease modeling to biohybrid robotic engineering.

Recently developed methods in mechanically guided assembly provide deterministic access to wide-ranging classes of complex, 3D structures in high-performance functional materials, with characteristic length scales that can range from nanometers to centimeters. These processes exploit stress relaxation in prestretched elastomeric platforms to affect transformation of 2D precursors into 3D shapes by in- and out-of-plane translational displacements. This paper introduces a scheme for introducing local twisting deformations into this process, thereby providing access to 3D mesostructures that have strong, local levels of chirality and other previously inaccessible geometrical features. Here, elastomeric assembly platforms segmented into interconnected, rotatable units generate in-plane torques imposed through bonding sites at engineered locations across the 2D precursors during the process of stress relaxation. Nearly 2 dozen examples illustrate the ideas through a diverse variety of 3D structures, including those with designs inspired by the ancient arts of origami/kirigami and with layouts that can morph into different shapes. A mechanically tunable, multilayered chiral 3D metamaterial configured for operation in the terahertz regime serves as an application example guided by finite-element analysis and electromagnetic modeling.

Many forms of stretchable electronic systems incorporate planar, filamentary serpentine structures to realize high levels of stretchability in ways that allow the use of high performance of inorganic functional materials. Recent advances in mechanics-guided, deterministic three-dimensional (3D) assembly provide routes to transform these traditional, two-dimensional (2D) serpentine layouts into 3D architectures, with significantly improved mechanics and potential for applications in energy harvesters, pressure sensors, soft robotics, biomedical devices and other classes of technologies. One challenge is that, by comparison to other geometries, the relatively low bending stiffnesses of the serpentine structures create difficulties in overcoming the interfacial adhesion energy to allow delamination from the underlying elastomeric substrate, as an essential aspect of the assembly process. An additional complication is that many of the functional materials widely used in stretchable electronics have a low strain threshold for failure such that damage can occur during buckling-induced assembly. Therefore, a clear understanding of the mechanics of buckled serpentine structures is essential to their design, fabrication and application. Through theoretical modeling and finite element analysis, we present models for the phase diagram of buckled states and the maximum strain in the globally-buckled serpentine structures. The analysis yield formulae in concise and explicit forms, clearly showing the effect of geometry/material parameters and the prestrain. The results can be used in designing buckled serpentine structures to ensure their compatibility with the mechanics-guided, deterministic 3D assembly and facilitate their applications in stretchable electronics.

A major experimental drought research project entitled “Mechanisms and Early Warning of Drought Disasters over Northern China” (DroughtEX_China) was launched by the Ministry of Science and Technology of China in 2015. The objective of DroughtEX_China is to investigate drought disaster mechanisms and provide early-warning information via multisource observations and multiscale modeling. Since the implementation of DroughtEX_China, a comprehensive V-shape in situ observation network has been established to integrate different observational experiment systems for different landscapes, including crops in northern China. In this article, we introduce the experimental area, observational network configuration, ground- and air-based observing/testing facilities, implementation scheme, and data management procedures and sharing policy. The preliminary observational and numerical experimental results show that the following are important processes for understanding and modeling drought disasters over arid and semiarid regions: 1) the soil water vapor–heat interactions that affect surface soil moisture variability, 2) the effect of intermittent turbulence on boundary layer energy exchange, 3) the drought–albedo feedback, and 4) the transition from stomatal to nonstomatal control of plant photosynthesis with increasing drought severity. A prototype of a drought monitoring and forecasting system developed from coupled hydroclimate prediction models and an integrated multisource drought information platform is also briefly introduced. DroughtEX_China lasted for four years (i.e., 2015–18) and its implementation now provides regional drought monitoring and forecasting, risk assessment information, and a multisource data-sharing platform for drought adaptation over northern China, contributing to the global drought information system (GDIS).

Piezoelectric microsystems are of use in areas such as mechanical sensing, energy conversion and robotics. The systems typically have a planar structure, but transforming them into complex three-dimensional (3D) frameworks could enhance and extend their various modes of operation. Here, we report a controlled, nonlinear buckling process to convert lithographically defined two-dimensional patterns of electrodes and thin films of piezoelectric polymers into sophisticated 3D piezoelectric microsystems. To illustrate the engineering versatility of the approach, we create more than twenty different 3D geometries. With these structures, we then demonstrate applications in energy harvesting with tailored mechanical properties and root-mean-square voltages ranging from 2 mV to 790 mV, in multifunctional sensors for robotic prosthetic interfaces with improved responsivity (for example, anisotropic responses and sensitivity of 60 mV N−1 for normal force), and in bio-integrated devices with in vivo operational capabilities. The 3D geometries, especially those with ultralow stiffnesses or asymmetric layouts, yield unique mechanical attributes and levels of functionality that would be difficult or impossible to achieve with conventional two-dimensional designs. Nonlinear buckling processes can be used to transform thin films of piezoelectric polymers into sophisticated 3D piezoelectric microsystems with applications in energy harvesting, multifunctional sensing and bio-integrated devices.

3D multifunctional frameworks, as flexible as a single strand of silk, modulate and measure neural activity of brain spheroids., Three-dimensional (3D), submillimeter-scale constructs of neural cells, known as cortical spheroids, are of rapidly growing importance in biological research because these systems reproduce complex features of the brain in vitro. Despite their great potential for studies of neurodevelopment and neurological disease modeling, 3D living objects cannot be studied easily using conventional approaches to neuromodulation, sensing, and manipulation. Here, we introduce classes of microfabricated 3D frameworks as compliant, multifunctional neural interfaces to spheroids and to assembloids. Electrical, optical, chemical, and thermal interfaces to cortical spheroids demonstrate some of the capabilities. Complex architectures and high-resolution features highlight the design versatility. Detailed studies of the spreading of coordinated bursting events across the surface of an isolated cortical spheroid and of the cascade of processes associated with formation and regrowth of bridging tissues across a pair of such spheroids represent two of the many opportunities in basic neuroscience research enabled by these platforms.

Structures that significantly and rapidly change their shapes and sizes upon external stimuli have widespread applications in a diversity of areas. The ability to miniaturize these deployable and morphable structures is essential for applications in fields that require high-spatial resolution or minimal invasiveness, such as biomechanics sensing, surgery, and biopsy. Despite intensive studies on the actuation mechanisms and material/structure strategies, it remains challenging to realize deployable and morphable structures in high-performance inorganic materials at small scales (e.g., several millimeters, comparable to the feature size of many biological tissues). The difficulty in integrating actuation materials increases as the size scales down, and many types of actuation forces become too small compared to the structure rigidity at millimeter scales. Here, we present schemes of electromagnetic actuation and design strategies to overcome this challenge, by exploiting the mechanics-guided three-dimensional (3D) assembly to enable integration of current-carrying metallic or magnetic films into millimeter-scale structures that generate controlled Lorentz forces or magnetic forces under an external magnetic field. Tailored designs guided by quantitative modeling and developed scaling laws allow formation of low-rigidity 3D architectures that deform significantly, reversibly, and rapidly by remotely controlled electromagnetic actuation. Reconfigurable mesostructures with multiple stable states can be also achieved, in which distinct 3D configurations are maintained after removal of the magnetic field. Demonstration of a functional device that combines the deep and shallow sensing for simultaneous measurements of thermal conductivities in bilayer films suggests the promising potential of the proposed strategy toward multimodal sensing of biomedical signals.

Significance Wireless electronics for monitoring of skin hydration in a quantitative fashion have broad relevance to our understanding of dermatological health and skin structure in both clinical and home settings. Here, we present a miniaturized, long-range automated system that adheres gently to the skin to yield quantitative recordings of skin water content for both epidermis and dermis. This system supports capabilities in characterizing skin barrier, assessing severity of skin diseases, and evaluating cosmetic and medication efficacy, with high levels of repeatability and insensitivity to ambient. Benchtop and pilot studies on patients with skin diseases highlight key features of these devices and their potential for broad utility in clinical research and in home settings to guide the management of disorders of the skin., Precise, quantitative measurements of the hydration status of skin can yield important insights into dermatological health and skin structure and function, with additional relevance to essential processes of thermoregulation and other features of basic physiology. Existing tools for determining skin water content exploit surrogate electrical assessments performed with bulky, rigid, and expensive instruments that are difficult to use in a repeatable manner. Recent alternatives exploit thermal measurements using soft wireless devices that adhere gently and noninvasively to the surface of the skin, but with limited operating range (∼1 cm) and high sensitivity to subtle environmental fluctuations. This paper introduces a set of ideas and technologies that overcome these drawbacks to enable high-speed, robust, long-range automated measurements of thermal transport properties via a miniaturized, multisensor module controlled by a long-range (∼10 m) Bluetooth Low Energy system on a chip, with a graphical user interface to standard smartphones. Soft contact to the surface of the skin, with almost zero user burden, yields recordings that can be quantitatively connected to hydration levels of both the epidermis and dermis, using computational modeling techniques, with high levels of repeatability and insensitivity to ambient fluctuations in temperature. Systematic studies of polymers in layered configurations similar to those of human skin, of porcine skin with known levels of hydration, and of human subjects with benchmarks against clinical devices validate the measurement approach and associated sensor hardware. The results support capabilities in characterizing skin barrier function, assessing severity of skin diseases, and evaluating cosmetic and medication efficacy, for use in the clinic or in the home.

Introduction: The microbiota is recognized for its impact on both human health and disease. The human microbiota is made up of trillions of cells, including bacteria, viruses, and fungi. The largest population of microbes reside in the gut, prompting research for better understanding of the impact of gastrointestinal microbiota in different diseases. Evidence from numerous studies has pointed out the role of commensal microbes as key determinants of cancer pathogenesis. Moreover, gut microbiota may play an important role in chemoresistance; consequently, this knowledge might be important for novel strategies to improve anticancer treatment efficacy. Areas covered: We describe the role of microbiota in different gastrointestinal cancer types (esophageal, gastric, colorectal, hepatocellular and pancreatic-biliary tract cancers). Moreover, we analyzed the impact of the microbiota on resistance to anticancer therapies, and, lastly, we focused on possibilities of microbiota modulation to enhance anticancer therapy efficacy. Expert opinion: Increasing evidence shows that gut microbiota might influence resistance to anticancer treatment, including conventional chemotherapy, immunotherapy, radiotherapy, and surgery. Therefore, a better knowledge of gut microbiota and its interactions with anticancer drugs will enable us to develop novel anticancer treatment strategies and subsequently improve the cancer patients’ outcome.

Porphyromonas gingivalis biofilms are implicated in the pathology of peri-implantitis and periodontitis. In this study, D-arginine (R), D-methionine (M), D-histidine (H), and a mixture of these D-amino acids (D-AAs) were investigated as an effective therapeutic strategy against P. gingivalis biofilms. The bacterial growth activity and minimum inhibitory concentrations were determined for each D-AA, along with the effects of the D-AAs mixture on biofilm development, morphology, structure, extracellular polysaccharides (EPS), cytotoxicity towards commensals, and bacterial structure. The D-AA mixture delayed the proliferation of P. gingivalis, changed its membrane structure, and decreased biofilm thickness and integrity, as compared with individual D-AAs. The EPS content increased with the concentration of D-AAs. The present study shows that a 4 mM RMH, triple D-AA mixture, enhanced deleterious effects on P. gingivalis biofilms without any cytotoxicity compared with individual D-AAs, thus providing a new strategy for the treatment of peri-implantitis and periodontitis.

Porphyromonas gingivalis (P. gingivalis) biofilm is involved in peri-implantitis and periodontitis. Whether a mixture of D-AAs has synergistic effects on P. gingivalis biofilm remains unknown. The aim of this study was to investigate the effects of multiple D-AAs on P. gingivalis biofilm. D-arginine (R), D-methionine (M) and D-histidine (H) were used. The bacterial growth activity and minimum inhibitory concentrations (MICs) were determined. The effects of D-AAs mixture on biofilm biomass, extracellular polymeric substances (EPS), biofilm morphology, cytotoxicity, biofilm structure and bacterial membrane integrity were determined. D-AAs mixture delayed the proliferation of P. gingivalis below MICs. Mixtures of D-AAs displayed definite effects on the inhibition and disassembly of biofilm than single D-AAs. The EPS content increased with D-AAs concentrations. D-AAs mixture damaged the integrity of biofilm, while RMH showed the best effects. 8 mM RH and 4 mM RMH had no cytotoxicity. 4 mM RMH decreased biofilm thickness and altered bacteria membranes structure. Hence, the combined mixture of 4 mM RMH presents the best synergistic effects on the inhibition and eradication of P. gingivalis biofilm. Our study provides new insights of application of D-AAs for the treatment of peri-implantitis and periodontitis.

Smartphone-compatible, wireless, battery-free hydration sensors can monitor skin diseases in any environment., Present-day dermatological diagnostic tools are expensive, time-consuming, require substantial operational expertise, and typically probe only the superficial layers of skin (~15 μm). We introduce a soft, battery-free, noninvasive, reusable skin hydration sensor (SHS) adherable to most of the body surface. The platform measures volumetric water content (up to ~1 mm in depth) and wirelessly transmits data to any near-field communication–compatible smartphone. The SHS is readily manufacturable, comprises unique powering and encapsulation strategies, and achieves high measurement precision (±5% volumetric water content) and resolution (±0.015°C skin surface temperature). Validation on n = 16 healthy/normal human participants reveals an average skin water content of ~63% across multiple body locations. Pilot studies on patients with atopic dermatitis (AD), psoriasis, urticaria, xerosis cutis, and rosacea highlight the diagnostic capability of the SHS (PAD = 0.0034) and its ability to study impact of topical treatments on skin diseases.

Bioresorbable drug release platforms offer advanced treatment for hormone imbalances, malignant cancers, and diabetic conditions., Implantable drug release platforms that offer wirelessly programmable control over pharmacokinetics have potential in advanced treatment protocols for hormone imbalances, malignant cancers, diabetic conditions, and others. We present a system with this type of functionality in which the constituent materials undergo complete bioresorption to eliminate device load from the patient after completing the final stage of the release process. Here, bioresorbable polyanhydride reservoirs store drugs in defined reservoirs without leakage until wirelessly triggered valve structures open to allow release. These valves operate through an electrochemical mechanism of geometrically accelerated corrosion induced by passage of electrical current from a wireless, bioresorbable power-harvesting unit. Evaluations in cell cultures demonstrate the efficacy of this technology for the treatment of cancerous tissues by release of the drug doxorubicin. Complete in vivo studies of platforms with multiple, independently controlled release events in live-animal models illustrate capabilities for control of blood glucose levels by timed delivery of insulin.

Hydrocephalus is a common disorder caused by the buildup of cerebrospinal fluid (CSF) in the brain. Treatment typically involves the surgical implantation of a pressure-regulated silicone tube assembly, known as a shunt. Unfortunately, shunts have extremely high failure rates and diagnosing shunt malfunction is challenging due to a combination of vague symptoms and a lack of a convenient means to monitor flow. Here, we introduce a wireless, wearable device that enables precise measurements of CSF flow, continuously or intermittently, in hospitals, laboratories or even in home settings. The technology exploits measurements of thermal transport through near-surface layers of skin to assess flow, with a soft, flexible, and skin-conformal device that can be constructed using commercially available components. Systematic benchtop studies and numerical simulations highlight all of the key considerations. Measurements on 7 patients establish high levels of functionality, with data that reveal time dependent changes in flow associated with positional and inertial effects on the body. Taken together, the results suggest a significant advance in monitoring capabilities for patients with shunted hydrocephalus, with potential for practical use across a range of settings and circumstances, and additional utility for research purposes in studies of CSF hydrodynamics.