Search

OBJECTIVE: Optimization of radiographic examinations is essential for radiation protection. The objective of the study was to investigate the clinical applicability of a low-dose CBCT protocol as compared to the default for pre-surgical evaluation of mandibular third molars. MATERIAL & METHODS: Forty-eight patients (62 teeth) referred for pre-surgical mandibular third molar investigation were recruited after justification for CBCT. Two CBCT scans of each site were made using a default protocol and a low-dose protocol (Veraviewepocs 3D F40, J Morita Corp, Kyoto, Japan). The low-dose protocol had the same tube potential (90 kV) and exposure time (9.4 s) as the default, but with reduced tube current, from 5 mA to 2 mA. Four observers evaluated the visibility of five relevant anatomical variables. Image quality was ranked on a 3-point scale as diagnostically acceptable, doubtful, or unacceptable. The Wilcoxon signed-rank test compared differences between the two protocols. The significance level was set at p ≤ .05. RESULTS: No significant differences were found between the two protocols for any observer regarding the visibility of the relationship and proximity between the roots and the mandibular canal; root morphology; and possible root resorption of the second molar. The periodontal ligament differed significantly in visibility between the two protocols (p ≤ .05). CONCLUSIONS: This study indicates that a low-dose CBCT protocol with a 60% reduction of the tube current provides, in most cases, acceptable image quality for pre-surgical assessment of mandibular third molars. Optimization of CBCT protocols should be a priority according to recommended guidelines.

Background and Objectives: There is limited information regarding comparison of long-term dynamics of periapical bone destruction estimated by digital periapical radiography (DPR) and by cone-beam computed tomography (CBCT). This study aimed to compare the radiographically assessed periapical changes of endodontically treated teeth over 2 years of follow-up and to analyse disagreements in periapical lesion size estimates around the same roots using DPR and CBCT. Materials and Methods: A total of 176 endodontically treated teeth, of 128 patients with apical periodontitis, were assessed by DPR and CBCT, at baseline and after 2 years. All periapical radiolucencies were categorised by severity (S0, S1, S2, S3) concerning their size. Descriptive statistics were used to report distribution of the radiolucencies at baseline and at follow-up, and their size transitions over 2 years. Site-specific comparison of the radiolucencies identified by two methods was performed using Z test and Pearson's chi-square test. Results: majority of the detected radiolucencies were scored as S0: 65% and 68% at baseline; 89% and 83% at follow-up, by DPR and CBCT, respectively. Site-specific score comparison showed that disagreements comprised 18% and 20% of the total number of radiolucencies detected by DPR and CBCT, respectively. There were more disagreements between DPR and CBCT within categories S1 and S2 + S3 compared to S0: at baseline, they comprised 17-33% and after two years 62-95% of all detected radiolucencies within the category. 65% of non-matching score transitions over two years occurred between S0 and S1. The CBCT-based evaluation resulted in negative treatment outcomes for 10 more root canals than the DPR-based result. Conclusions: Most remarkable disagreement between DPR and CBCT recordings was observed within the radiolucency categories S2 and S3. However, the diagnostic accuracy of both radiographic methods was questionable as it resulted in a high proportion of non-matchin

OBJECTIVES: The aim was to evaluate the characteristics of the mandibular third molars, especially in relation to the inferior alveolar nerve. Further aims were to investigate incidental findings in panoramic radiographs in an adult population, and to investigate image quality related to patient positioning. MATERIALS AND METHODS: From a previous study with 451 randomly selected adult participants who lived in Sweden, 442 panoramic radiographs from four dental public health clinics were used. The third molars' characteristics and relation to inferior alveolar nerve were evaluated. Incidental findings and patient positioning were recorded. STATISTICAL ANALYSIS: Frequency analysis was used to investigate the occurrence of all findings and their possible interconnections. Whether the patients' age or gender had an impact or not was also analyzed. RESULTS: The third molars were erupted in vertical position among 73% regardless of age. When retained or semi-retained, they were most commonly in mesioangular positions. The inferior alveolar nerve was located inferior to the roots in 52%, whereas an overlapped position was most common if the third molar was retained (90%), semi-retained (83%) or the age was less than 30 years (66%). Common incidental findings were apical radiolucencies, idiopathic osteosclerosis, and tooth fragments. Suboptimal patient positioning was found in one-third of the radiographs. CONCLUSIONS: Panoramic radiography is a useful method to evaluate third molar prior to surgical removal and may be the only image required. Most incidental findings on panoramic radiographs does not seem to require any further odontological management.

Background: To evaluate whether buccal bone thickness (BBT), implant diameter, and abutment/crown material influence the accuracy of cone beam computed tomography (CBCT) to determine the buccal bone level at titanium implants. Methods: Two implant beds (i.e., narrow and standard diameter) were prepared in each of 36 porcine bone blocks. The implant beds were positioned at a variable distance from the buccal bone surface, thus resulting in 3 BBT groups (i.e., > 0.5-1.0; > 1.0-1.5; > 1.5-2.0 mm). In half of the blocks, a buccal bone dehiscence of random extent ("depth") was created and implants were mounted with different abutment/crown material (i.e., titanium abutments with a metal-ceramic crown and zirconia abutments with an all-ceramic zirconia crown). The distance from the implant shoulder to the buccal bone crest was measured on cross-sectional CBCT images and compared to the direct measurements at the bone blocks. Results: While abutment/crown material and implant diameter had no effect on the detection accuracy of the buccal bone level at dental implants in CBCT scans, BBT had a significant effect. Specifically, when BBT was ≤ 1.0 mm, a dehiscence was often diagnosed although not present, i.e., the sensitivity was high (95.8%), but the specificity (12.5%) and the detection accuracy (54.2%) were low. Further, the average measurement error of the distance from the implant shoulder to the buccal bone crest was 1.6 mm. Conclusions: Based on the present laboratory study, BBT has a major impact on the correct diagnosis of the buccal bone level at dental titanium implants in CBCT images; in cases where the buccal bone is ≤ 1 mm thick, detection of the buccal bone level is largely inaccurate. This article is protected by copyright. All rights reserved.

Purpose: The aim of this study was to assess the artefacts of 12 fixed orthodontic appliances in magnetic resonance images obtained using 1.5-T and 3-T scanners, and to evaluate different imaging sequences designed to suppress metal artefacts. Materials and Methods: In vitro, study casts of 1 adult with normal occlusion were used. Twelve orthodontic appliances were attached to the study casts and scanned. Turbo spin echo (TSE), TSE with high readout bandwidth, and TSE with view angle tilting and slice encoding for metal artefact correction were used to suppress metal artefacts. Artefacts were measured. In vivo, 6 appliances were scanned: 1) conventional stainless-steel brackets; 2) nickelfree brackets; 3) titanium brackets; 4) a Herbst appliance; 5) a fixed retainer; and 6) a rapid maxillary expander. The maxilla, mandible, nasopharynx, tongue, temporomandibular joints, and cranial base/eye globes were assessed. Scores of 0, 1, 2, and 3 indicated no artefacts and minor, moderate, and major artefacts, respectively. Results: In vitro, titanium brackets and the fixed retainer created minor artefacts. In vivo, titanium brackets caused minor artefacts. Conventional stainless-steel and nickel free brackets, the fixed retainer, and the rapid maxillary expander caused major artefacts in the maxilla and mandible. Conventional stainless-steel and nickel-free brackets caused major artefacts in the eye globe (3-T). TSE with high readout bandwidth reduced image artefacts in both scanners. Conclusion: Titanium brackets, the Herbst appliance, and the fixed retainer caused minor artefacts in images of neurocranial structures (1.5-T and 3-T) when using TSE with high readout bandwidth.

This retrospective study investigated requests and indications for cone-beam computed tomography (CBCT) in children and adolescents over a 3-year period at one oral and maxillofacial radiology department. Specific aims were to determine what technical settings were used, which caregivers write the referrals, and how often and for what reasons re-exposure was necessary. Patients

OBJECTIVE: Evaluation of cone beam CT (CBCT) examination with a low-dose scanning protocol for assessment of the temporomandibular joint (TMJ). METHODS: 34 adult patients referred for CBCT imaging of the TMJ underwent two examinations with two scanning protocols, a manufacturer-recommended protocol (default) and a low-dose protocol where the tube current was reduced to 20% of the default protocol. Three image stacks were reconstructed: default protocol, low-dose protocol, and processed (using a noise reduction algorithm) low-dose protocol. Four radiologists evaluated the images. The Sign test was used to evaluate visibility of TMJ anatomic structures and image quality. Receiver operating characteristic analyzes were performed to assess the diagnostic accuracy. κ values were used to evaluate intraobserver agreement. RESULTS: ) averaged for the low-dose and processed protocols, according to all observers, were 0.931 and 0.941, respectively. Intraobserver agreement was good to very good. CONCLUSION: For the CBCT unit used in this study, the low-dose CBCT protocol for TMJ examination was diagnostically comparable to the manufacturer-recommended protocol, but delivered a five times lower radiation dose. There is an urgent need to evaluate protocols for CBCT examinations of TMJ in order to optimize them for a radiation dose as low as diagnostically acceptable (the as low as diagnostically acceptable principle recommended by NCRP).

Objectives: To compare selected anatomical and treatment-related diagnostic parameters estimated by cone-beam computed tomography and by digital periapical radiography in teeth with apical periodontitis, and to evaluate reliability of different examiners in interpretation of images obtained by both methods. Material and Methods: Teeth with apical periodontitis were evaluated independently by 2 endodontists and 1 radiologist based on 128 cone-beam computed tomography (CBCT) and 162 digital periapical radiography (DPR) images. Anatomical (size, relation with root, location of periapical radiolucency) and treatment-related (canal obturation length, homogeneity, coronal seal) parameters were assessed. Fleiss kappa reflected inter-observer agreement while intra-examiner agreement was estimated by Cohen's kappa. McNemar and McNemar-Bowker tests served for evaluation of differences between CBCT- and DPR-based estimates. Results: Cohen's kappa ranged from 0.62 to 1 for all examiners. Fleiss kappa values were nearly perfect for majority of parameters. Diagnostic discrepancy between methods was found for size of radiolucency that in 15 - 17% cases was larger, and in 25 - 28% smaller in DPR than in CBCT images. DPR revealed 20% of root canals scored as non-obturated while in CBCT - obturation present. Canal obturation was rated as homogenous by CBCT, while absent or non-homogenous by DPR, in 17 - 23%, and 11 - 14% of cases, respectively. Radiologist detected more root perforations in CBCT than in DPR images. Conclusions: Good intra- and inter-examiner agreement for anatomical and treatment-related diagnostic parameters was achieved using cone-beam computed tomography and digital periapical radiography methods and demonstrated similar diagnostic capability, although variation regarding root perforations and canal obturation quality was observed.

Objectives: Radiographic images suffer from varying amounts of noise. The most studied and discussed of these is random noise. However, recent research has shown that the projected anatomy contributes substantially to noise, especially when detecting low-contrast objects in the images. Our aim, therefore, was to evaluate the extent to which overprojected anatomical noise affects the detection of low-contrast objects in intra-oral images. Methods: Our study used four common sensor models. With each sensor, we took four series of images, three series with and one series without an anatomical phantom present. In each series, we exposed a low-contrast phantom at 18 different exposure times using a standardized method. 4 observers evaluated all 288 images. Results: The low-contrast characteristics differed substantially when imaging low contrast on a homogeneous background compared with imaging low contrast when an anatomical phantom was present. For three of the sensors, optimal exposure times for low-contrast imaging were found, while the fourth sensor displayed a completely different behaviour. Conclusions: Calibrating the low-contrast properties of an imaging system using low-contrast objects on a homogeneous background is not recommended. On an anatomical background, low-contrast properties are completely different, and these will mimic the clinical situation much more closely, directing the operator how to best use the system. There is a clear demand for further research on this subject.

Objectives: Cone-beam computed tomography in dentistry can be used in some countries by other dentists than specialists in radiology. The frequency of buying cone-beam computed tomography to examine patients is rapidly growing, thus knowledge of how to use it is very important. The aim was to compare the outcome of an investigation on the use of cone-beam computed tomography in Sweden with a previous Norwegian study, regarding specifically technical aspects. Material and Methods: The questionnaire contained 45 questions, including 35 comparable questions to Norwegian clinics one year previous. Results were based on inter-comparison of the outcome from each of the two questionnaire studies. Results: Responses rate was 71% in Sweden. There, most of cone-beam computed tomography (CBCT) examinations performed by dental nurses, while in Norway by specialists. More than two-thirds of the CBCT units had a scout image function, regularly used in both Sweden (79%) and Norway (75%). In Sweden 4% and in Norway 41% of the respondents did not wait for the report from the radiographic specialist before initiating treatment. Conclusions: The bilateral comparison showed an overall similarity between the two countries. The survey gave explicit and important knowledge of the need for education and training of the whole team, since radiation dose to the patient could vary a lot for the same kind of radiographic examination. It is essential to establish quality assurance protocols with defined responsibilities in the team in order to maintain high diagnostic accuracy for all examinations when using cone-beam computed tomography for patient examinations.

OBJECTIVE: The purpose of this work was to develop an inexpensive phantom for simplified image quality assurance (IQA) together with algorithms for objective evaluation of image quality parameters and to integrate these components into an easy-to-use software package. This should help make quality control of dental cone beam computed tomography (CBCT) units accessible, easy, and affordable for any specialist or general practitioner.STUDY DESIGN: Our study developed an inexpensive polymethyl methacrylate (Plexiglas) phantom containing objects and structures for objective quantification of the most important image-quality parameters in CBCT imaging. It also paired the phantom with a software package, based on open-source software, for automatic processing and analysis.RESULTS: The software produces objectively measured IQA data for low- and high-contrast resolution, uniformity, noise characteristics, and geometric linearity.CONCLUSIONS: The authors consider the phantom and methods presented in this article to be a step toward helping clinical dental personnel perform regular quality assurance on CBCT units.