Search

Microwave-assisted synthesis of the lipase-catalyzed ring opening polymerization of ε-caprolactone (ε-CL) and ω-pentadecanolactone (ω-PDL) monomers was studied. A series of P(CL-co-PDL), with different molar feed ratios, including (ε-CL/ω-PDL) 100/0, 75/25, 50/50, 25/75, and 0/100, were synthesized. The resulting polyesters were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The microwave-assisted polymerization of the monomers reached high conversions (91–95%) within 60 min. FTIR spectra showed the typical absorption bands of these polyesters. A very intense band in the carbonyl region, which was shifted from 1,720 cm−1 for PCL to 1,732 cm−1 for PPDL homopolymer, as well as peaks owing to methylene groups in the 2,990–2,850 cm−1 range. DSC results revealed that all polyester samples were semi-crystalline. Interestingly, the copolymers exhibited only one melting peak (T m), and their T m values linearly increased from 57°C to 95°C as PPDL concentration was increased. Thermal stability of polyesters also depended on PDL content; an increase in PDL concentration increases polymer degradation temperature (T d).

Recently, different carbon-based nanomaterials have been used as reinforcing agents in acrylic bone cement formulations. Among them, graphene oxide (GO) has attracted the attention of scientific community since it could improve not only the mechanical properties but also the biocompatibility characteristics of these materials. However, using GO presents some drawbacks, such as its poor dispersion and lack of interaction with polymeric matrices, which should be prior resolved to achieve its optimal performance in acrylic bone cement. Thus, in this work, GO was treated with 3-methacryloxy propyl trimethoxy silane at various concentrations (1, 3 and 5 wt.%) to improve the interaction between the nanofiller and the poly (methyl methacrylate) matrix. Modified GO was incorporated at different percentages (0.1, 0.5 and 0.75 wt.%) into acrylic bone cement formulations and some properties were evaluated. The silanization process of the GO was confirmed by FTIR, TGA and EDX. The improvement in the mechanical performance was monitored on the compression properties whereas those related with biological properties were evaluated by osteoblast cell viability and hemocompatibility tests. Results suggest that using a 1 wt.% of the silane coupling agent, during surface treatment of GO, yields the best mechanical performance in this type of materials. It was also found that the presence of neat GO or silanized GO does not compromise the cytocompatibility and hemocompatibility of acrylic bone cement formulations.

Elemental composition, physical dimensions (length and apparent diameter), and crystallinity of different types of naturally colored cotton (NCCs) fibers from Peru were investigated using a CHNS organic elemental analyzer, optical microscopy and X-Ray Diffraction (XRD). Spectroscopic studies involving Fourier Transform Infrared Spectroscopy and X-Ray photoelectron spectroscopy (XPS) were conducted; and the thermal stability of cotton samples were also investigated. Results from organic elemental analyzer and XPS showed that cotton samples contain mainly carbon, oxygen and hydrogen, but darker color samples also presented nitrogen. It was also found that the white cotton sample exhibited the longest fibers whereas the darker color samples showed the shortest values in length. Interestingly, the crystallinity seems also decrease with color intensity of NCCs. Finally, the thermal stability of white cotton fibers was similar to those obtained for the NCCs., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Electrospun polycaprolactone (PCL)/chitosan (CH) blend scaffolds with different CH weight ratios were prepared to study the effect of scaffold composition on its physicochemical and biological properties. Scanning electron microscopy showed bead-free homogeneous randomly arranged nanofibers whose average diameter decreased from 240 to 110 nm with increasing CH content. The infrared spectra of the PCL/CH blends were very similar to the neat PCL scaffold. Energy-dispersive x-ray spectroscopy analysis confirmed the presence of carbon, oxygen and nitrogen in the scaffolds, although fluorine-from chemicals used as solvent-was also detected. The water contact angle decreased from 113° (for PCL) to 52° with increasing chitosan content. The biocompatibility was evaluated using fibroblasts and Schwann cell (SC) cultures. Cytotoxicity assays using fibroblasts demonstrated that electrospun scaffolds could be considered as non-cytotoxic material. Biocompatibility tests also revealed that the SCs adhered to scaffolds with different CH content, although the formulation containing CH at 5 wt% exhibited the highest proliferation on days 1 and 3. A better cell distribution was observed in the CH/PCL blends than in the neat PCL or CH scaffolds, where the cells were clustered. Immunochemistry analysis confirmed that SCs expressed the specific p75 cell marker on the scaffolds, suggesting that PCL/CH scaffolds would be good candidates for peripheral nerve tissue engineering.

The aim of this work was to provide some fundamental information for optimization of silanization of hydroxyapatite intended for bone cement formulations. The effect of 3-(trimethoxysilyl) propyl methacrylate (MPS) concentration and solvent system (acetone/water or methanol/water mixtures) during HA silanization was monitored by X-ray diffraction (XRD), FTIR spectroscopy and EDX analysis. The effect of silanized HA on the mechanical properties of acrylic bone cements is also reported. It was found that the silanization process rendered hydroxyapatite with lower crystallinity compared to untreated HA. Through EDX, it was observed that the silicon concentration in the HA particles was higher for acetone-water than that obtained for methanol-water system, although the mechanical performance of cements prepared with these particles exhibited the opposite behavior. Taking all these results together, it is concluded that methanol-water system containing MPS at 3wt.% provides the better results during silanization process of HA., (Copyright © 2014 Elsevier B.V. All rights reserved.)

In this work, the effect of the incorporation of comonomers containing amine groups on the mechanical and fracture properties of acrylic bone cements was studied. Cements were prepared with either diethyl amino ethyl acrylate (DEAEA), dimethyl amino ethyl methacrylate (DMAEM) or diethyl amino ethyl methacrylate (DEAEM) as comonomer in the liquid phase. It was found that strength and modulus decreased with increasing comonomer content in the bending and compressive tests. It was also observed that fracture toughness (K(IC)) and the critical strain energy release rate (G(IC)) increase with increasing comonomer concentration and are significantly higher compared to the control formulation. The mechanical and fracture properties of cements were also evaluated after soaking the specimens in Simulated Body Fluid (SBF) for 3 and 6 months. It was found that the mechanical properties of cements decreased when the samples were stored in SBF, although the impact strength increased in the first 3 months and then decreased. SEM micrographs were in agreement with the results obtained during mechanical characterization as the increase in toughness was confirmed by the appearance of ductile tearing pattern which is associated with plastic deformation., (Copyright © 2011 Elsevier Ltd. All rights reserved.)