Search

The current status and the progress of research and development (R&D) activities for a Fusion DEMO reactor in the National Institutes for Quantum and Radiological Science and Technology (QST) Rokka...

The eight-chain RF system and radio frequency quadrupole (RFQ) linac were successfully integrated at the facility of the Linear IFMIF Prototype Accelerator (LIPAc). We achieved an unprecedented high current deuteron beam up to 55 mA in pulse operation ( $300~\mu \text{s}$ , 1 Hz). The keys of the success were (1) understanding reflected power from RFQ to RF system, (2) tuning each RF chain individually, (3) intensive RF conditioning for holding the stable RF power in the RFQ, and (4) optimizing the beam loading compensation control. Interestingly, the reflection at the breakdown in RF conditioning was higher than an estimation and reached up to 600 kW so far. In order to avoid damage on tetrodes by the high reflection, the impedance of each circulator was accurately adjusted.

The detailed shielding analysis has been performed in order to find a configuration of the radiation shielding in the accelerator building necessary for the operation of the Linear IFMIF Prototype Accelerator (LIPAc), which is under construction in Rokkasho, Japan, at the full power of 1.125 MW to satisfy the radiation dose limit prescribed by Japanese regulations. The final design of the beam dump constructed by CIEMAT, Spain was fully taken into consideration. The impact of all the features potentially causing neutron streaming were investigated and the optimization of local additional shieldings were conducted. As the result, the most important one was found to be the air ventilation duct shield, which completely covers the ducts and creates an additional labyrinth. By considering the additional shielding configuration determined in the present study, the legal criteria at the controlled area boundary can be completely satisfied.

International audience; Design, development, manufacturing, and test activities of the RF power system (RFPS) for Linear IFMIF Prototype Accelerator (LIPAc) were completed in Europe. Installation and commissioning activities were carried out at the International Fusion Materials Irradiation Facility-Engineering Validation and Engineering Design Activities (IFMIF/EVEDA) site in Rokkasho, Japan. Challenging IFMIF requirements led to a number of innovations during design and development. Commissioning required a major effort on calibration and fine setting and led to development of new functionalities. The RFPS was validated under full power and 125-mA deuteron beam loading conditions, in the radio frequency quadrupole (RFQ), demonstrating good performance. This article is an overview about how technical challenges impacted the prototype RFPS design and its functional evolution during commissioning, cavity conditioning, and beam operation of the RFQ.

International audience; LIPAc is the Linear IFMIF Prototype Accelerator developed within the framework of the IFMIF project under the Broader Approach (BA) agreement signed between EURATOM and the Japanese Government in 2007. The IFMIF accelerator aims to provide an accelerator-based D-Li neutron source to produce high intensity neutron fluxes with appropriate energy spectrum in order to characterize materials envisioned for future fusion reactors. Because the IFMIF accelerator has to reach unprecedented performances, the feasibility is being tested through the design, manufacturing, installation, commissioning and testing activities of a 1:1-scale prototype accelerator, namely LIPAc, from the injector to the first cryomodule together with the High Energy Beam Transport line and the High Power Beam Dump. After outstanding results obtained in 2019, the LIPAc project has entered 2020 in the preparation of the third commissioning stage, i.e., validation in continuous-wave mode of the complete accelerator up to 5 MeV with its final beam dump. The validation until the nominal energy of 9 MeV will be made after the completion of cryomodule assembly. After a brief overview of the goals already achieved in the framework of the IFMIF/EVEDA program, this paper will present a synthesis of the results that have been obtained so far with the LIPAc accelerator as well as the future developments planned beyond 2020.

The IFMIF accelerator facility consists of 2 identical linacs, each accelerating a 125 mA CW deuteron beam up to the energy of 40 MeV. In order to reach these unprecedented performances, the Linear IFMIF Prototype Accelerator (LIPAc) is under installation and commissioning at the International Fusion Energy Research Centre (IFERC) in Rokkasho, Japan, in the framework of the IFMIF/EVEDA project, which is part of the Broader Approach (BA) agreement between Japan and EU. The accelerator is designed to validate components up to 125 mA CW deuteron beam at 9 MeV. The accelerator components of LIPAc have been designed and manufactured mainly by European Institutes. The injector and superconducting linac, RFQ, MEBT, Diagnostics Plate, HEBT and beam dump have been developed respectively by CEA-Saclay, INFN-Legnaro and CIEMAT-Madrid and were delivered to Rokkasho between 2013 and 2016. The commissioning of the injector with beam started in November 2014. This paper dealt with the experimental data obtained with the beam diagnostics of the injector. The electrical measurements of the beam intensity on the beam stopper were compared with calorimetric measurements. The beam profiles measured with a CCD camera and a custom image-intensified CID camera are also addressed. The analysis of beam emittance and ion species fractions from data obtained with an Allison scanner is described and the results of species fraction measurements are compared with those obtained by using a deported spectrometer. Finally, the analysis of beam space potential from data obtained with a 4-Grid analyser is presented.

The construction of the Linear IFMIF Prototype Accelerator (LIPAc) is in progress at Rokkasho, Japan. The important milestone of the project is to commission the necessary components, namely RFQ, MEBT and diagnostics, to accelerate the proton beam up to 2.5 MeV or the deuteron beam up to 5.0 MeV in pulsed mode with a low duty cycle of 0.1%. The detailed radiation safety analysis has been conducted for the beam commissioning with the consideration of the specific radiation source conditions and the building configuration. As a result, it turned out that the dose rate expected outside the accelerator vault during deuteron beam operation at 5 MeV is mostly dominated by the neutron streaming effect through three major penetration sectors, i.e. HVAC ducts, water pipe holes and underground pits, while it is negligibly small during the proton beam operation at 2.5 MeV. It was confirmed that the dose rate expected does not exceed the legal limit for the controlled area boundary and no serious radiological issues exist in the beam commissioning planned.

The construction of the Linear IFMIF Prototype Accelerator (LIPAc) is in progress in order to demonstrate the feasibility of the low energy section of an IFMIF deuteron accelerator up to 9 MeV with a beam current of 125 mA in CW. The next milestone of the project is the so-called Phase-B beam commissioning, and one of the missions is to demonstrate the acceleration of the proton beam up to 2.5 MeV or the deuteron beam up to 5.0 MeV in pulsed mode with a low duty cycle of 0.1% through RFQ. Most of the components and subsystems necessary for Phase-B were delivered by 2016 under the responsibility of Fusion for Energy (F4E) as in-kind contributions of several European institutes, namely CEA (France), CIEMAT (Spain), INFN (Italy), and SCK-CEN (Belgium), and QST is in charge of the installation of the delivered equipment. The installation and check-out of the RFQ subsystem and the RF power system was completed by July 2017, and the RF conditioning of the RFQ cavity started. Also, the installation and the check-out of the important sub-systems for Phase-B, namely MEBT and beam diagnostics, have been completed. Keywords: IFMIF, LIPAc, RFQ, Accelerator, Deuteron, Neutron source

The validation of the Linear IFMIF Prototype Accelerator (LIPAc) is being conducted in Rokkasho Fusion Institute of QST, Aomori, Japan. The beam commissioning of the novel LIPAc RFQ has been progressing significantly, and the acceleration of the world highest current deuteron beam of 125 mA to 5 MeV (1 ms, 1 Hz pulsed beam) was achieved for the 1st time in July 2019. This study is devoted to evaluating the amount of beam loss during the high current acceleration phase by measuring the neutron produced by the interaction of the beam with accelerator components so as to verify the accelerator design. The foil activation method and the 3He neutron probes were utilized. It turned out that there was no significant trace of unexpected beam loss at the high energy section of the RFQ and the Medium Energy Beam Transport (MEBT) section.The measurement using the 3He neutron probes provided an evidence that the beam loss was well controlled in the RFQ cavity as designed. This study concludes that the LIPAc RFQ as well as MEBT is working well as predicted by the design calculation, and its concept is successful.

IFMIF-DONES (International Fusion Materials Irradiation Facility–DEMO Oriented Neutron Source) is currentlybeing developed in the frame of the EUROfusion Early Neutron Source work package (WPENS) and will be aninstallation for fusion material testing, that will generate aflux of neutrons of 1018m−2s−1with a broad peak at14 MeV by Li(d,xn) nuclear reactions thanks to a 40 MeV deuteron beam colliding on a liquid Liflow.The accelerator system is in charge of providing such high energy deuterons in order to produce the expectedneutronflux. The High Energy Beam Transport line (HEBT) is the last subsystem of the accelerator and its mainfunctions are to guide the deuteron beam towards the Lithium target and to shape it by the use of magneticelements to the reference beam footprint at the Lithium Target.The present work summarizes the current status of the HEBT design, including beam dynamics, vacuum,radioprotection, diagnostics and remote handling studies performed, along with the layout and integration of theline., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 and 2019–2020 under grant agreement No 633053. The work done by IREC has been supported by the CERCA Programme from Generalitat de Catalunya (Government of Catalonia).

The Linear IFMIF (International Fusion Materials Irradiation Facility) Prototype Accelerator (LIPAc) is a 9 MeV, 125 mA, continuous wave (CW) deuteron accelerator aimed to validate the technology for the IFMIF accelerators. The construction of LIPAc, which is currently the most powerful deuteron accelerator in the world, has been carried out under the Broader Approach (BA) Agreement between EU and Japan, and it is located at Rokkasho (Japan). CIEMAT is one of the five European Institutions that has participated in the design, manufacturing and commissioning/operation of the main accelerator components, among them, the Radio Frequency Power System (RFPS). The RFPS contains all the equipment necessary to generate the required RF power to feed the LIPAc cavities. These cavities demand eighteen RF power chains at 175 MHz being distributed as follows: eight 200 kW tetrode-based chains for the Radiofrequency Quadrupole (RFQ), two 16 kW solid-state chains for the re-buncher cavities, and eight 105 kW tetrode-based chains for the Superconducting RF Linac Half-Wave Resonators. The design of the RFPS main components is presented in this paper, including the tetrode-based chains, the Solid-State Power Amplifier (SSPA) for the re-buncher cavities, the High Voltage Power Supplies (HVPSs) for the final amplifiers anodes and the RF water cooling system. Additionally, the main difficulties encountered during the first months of the RFPS commissioning and operation will be described, together with the applied improvements.

For the development of the International Fusion Materials Irradiation Facility (IFMIF) aiming at material tests for fusion power plants, the construction of the Linear IFMIF Prototype Accelerator (LIPAc) has been conducted at Rokkasho, Japan under the Broader Approach Agreement. The commissioning of LIPAc has been progressing significantly. The world most powerful RFQ successfully accelerated proton beam of 58 mA, and an important project milestone of the acceleration of deuteron beam to 5 MeV with the beam current of 125 mA in pulse mode was successfully achieved. The result proves the validity of the present RFQ design. The adjustment and tuning of the RF power system and the injector for enabling an operation at maximum performances played an important role in achieving this result. For the next step, the preparation of the high duty cycle operation of RFQ is underway. The installation of the HEBT (High Energy Beam Transport line) and the beam dump accepting 1 MW, CW beam, has been completed and a new beam transport line is under manufacturing. Also the assembly of the Superconducting RF (SRF) linac to accelerate the beam up to 9 MeV started in a clean room in Rokkasho.

The Linear IFMIF (International Fusion Materials Irradiation Facility) Prototype Accelerator (LIPAc) is aiming at demonstrating the low energy section of a 40 MeV/125 mA IFMIF deuteron accelerator up to 9 MeV with a full beam current in cw operation. For such a high-power beam, the LIPAc injector is required to produce a 100 keV D+ beam with 140 mA and match it for injection into the Radio Frequency Quadrupole (RFQ) accelerator. The injector is designed by CEA-Saclay based on the high intensity light ion source (SILHI). In 2019, the commissioning of the RFQ to demonstrate the D+ beam acceleration at a low duty cycle (0.1%) was conducted. A nominal beam current of 125 mA D+ beam was accelerated up to 5 MeV through the RFQ successfully. The LIPAc injector fully satisfied the requirements for RFQ beam commissioning at the pulse mode.

During the EVEDA (engineering validation and engineering design activities) phase of the International Fusion Materials Irradiation Facility (IFMIF) project, a 125 mA/9 MeV linear prototype accelerator (LIPAc) has to be built, tested and operated in Rokkasho-mura (Japan). Involved in this project for several years, CEA-Saclay designed the injector of this accelerator which is composed of an electron cyclotron resonance ion source, delivering a 140 mA deuteron beam at 100 keV, and a low energy beam transport (LEBT) line to match the beam for the injection into the radio-frequency quadrupole. In this paper, the components of the LIPAc injector are described. The commissioning of the ion source and LEBT with beam started in November 2014. The different phases of the commissioning are explained and some noticeable experimental results obtained with a beam at 100 keV are presented.

One of the main limitations to the sensitivity of the infrared camera ISOCAM on-board the Infrared Space Observatory (ISO) comes from responsivity variations and glitches caused by the impacts of charged particles in photo-detectors. Glitch rate measurements, glitch properties and removal methods have already been addressed during the first ISO detector workshop(Madrid, 1998) and published in a special issue of Experimental Astronomy. It appeared that glitch rate and most of glitch properties could be reproduced by Monte-Carlo simulations. This is very interesting in order to predict before launch the effect of charged particles in photo-detectors operated in space. This paper presents results of Monte-Carlo simulations of radiation effects on ISOCAM detectors. Glitch rates, spatial and energetic properties of glitches have been computed and are compared with measured values.