Search

Over a long period of development of the network communication general user (NCGU), various models have been developed, focused on the service of voice traffic. In the next generation NGN heterogeneous communication network, voice traffic service has become one of the applications. This application was subject to stringent timing requirements (latency and loss). Further development took place to develop new applications that impose even more severe service requirements. Such applications have had a significant impact on the requirements and timing of next generation communications networks. In this regard, it was proposed in various recommendations to distinguish networks that provide services with strict requirements for time parameters into a new class of networks and call them networks with low and ultra-low delays.

Ο ταχύτατα εξελισσόμενος τομέας των δικτύων κινητών επικοινωνιών έχει επιφέρει μία ιδιαίτερα αυξανόμενη απαίτηση για ασύρματη, πολυμεσική επικοινωνία. Στη ραγδαία εξέλιξη του τομέα αυτού συμβάλουν τα μέγιστα και οι απαιτήσεις της σύγχρονης αγοράς για ένα ενοποιημένο και λειτουργικό σύστημα κινητής τηλεφωνίας παρέχοντας παράλληλα πληθώρα ευρυζωνικών υπηρεσιών ψηφιακού περιεχομένου στους πελάτες - χρήστες του. Είναι γεγονός ότι τα τελευταία χρόνια τα δίκτυα επικοινωνιών τρίτης γενιάς (3G) - Universal Mobile Telecommunication System (UMTS) γνωρίζουν μεγάλη άνθηση και η χρήση τους έχει επεκταθεί στις περισσότερες ευρωπαϊκές χώρες, όπως και στην Ελλάδα. Τα νέα αυτά κινητά δίκτυα αντικαθιστούν τα υπάρχοντα κινητά δίκτυα δεύτερης γενιάς και επιπλέον προσφέρουν προηγμένες υπηρεσίες στους κινητούς χρήστες. Ωστόσο, η αδήριτη ανάγκη για μεγαλύτερες (ευρυζωνικές) ταχύτητες πρόσβασης οδήγησε στην περαιτέρω ανάπτυξη των 3G δικτύων και στην υιοθέτηση νέων τεχνολογιών, με κυριότερο εκπρόσωπο τους την τεχνολογία High Speed Packet Access (HSPA). Η τεχνολογία HSPA αποτελεί τη φυσιολογική μετεξέλιξη του UMTS, η οποία πολλές φορές συναντάται και ως 3.5G ή 3G+, προκειμένου να δηλώσει την αναβάθμιση του 3G (UMTS) προτύπου. Ωστόσο, παρά το γεγονός ότι η τεχνολογία HSPA αναμένεται να προσφέρει τη δυνατότητα παροχής πληθώρας ευρυζωνικών υπηρεσιών, το 3rd Generation Partnership Project (3GPP), που αποτελεί τον οργανισμό που προτυποποιεί τις νέες τεχνολογίες και ορίζει τις προδιαγραφές τους, ήδη μελετά και επεξεργάζεται νέες τεχνολογίες που θα επικρατήσουν την αμέσως επόμενη δεκαετία στην αγορά των κινητών επικοινωνιών. Το νέο αυτό project αποκαλείται Long Term Evolution (LTE) και στοχεύει στην επίτευξη ακόμη υψηλότερων ρυθμών μετάδοσης σε συνδυασμό με την αξιοποίηση μεγαλύτερου εύρος ζώνης. Κύρια προοπτική του LTE αποτελεί η διασφάλιση της ανταγωνιστικότητας και η επικράτηση του προτύπου στο χρονικό ορίζοντα της επόμενης δεκαετίας. Κατά συνέπεια, η αγορά κινητών επικοινωνιών σταδιακά μεταλλάσσεται προς τη δημιουργία δικτύων κινητών επικοινωνιών επόμενης γενιάς, με απώτερο σκοπό την επίτευξη της αποκαλούμενης "Κινητής Ευρυζωνικότητας" (Mobile Broadband). Ταυτόχρονα με την εκτεταμένη εξάπλωση των δικτύων κινητών επικοινωνιών επόμενης γενιάς καθώς και τις αυξημένες δυνατότητες των κινητών συσκευών, οι πάροχοι πολυμεσικού περιεχομένου και υπηρεσιών ενδιαφέρονται όλο και περισσότερο για την υποστήριξη της πολυεκπομπής (multicasting) δεδομένων στα δίκτυα αυτά με σκοπό την αποτελεσματική διαχείριση και επαναχρησιμοποίηση των διαθέσιμων πόρων του δικτύου. Επιπρόσθετα, οι χρήστες των κινητών δικτύων έχουν πλέον την απαίτηση να προσπελαύνουν εφαρμογές και υπηρεσίες οι οποίες μέχρι σήμερα μπορούσαν να διατεθούν αποκλειστικά από τα συμβατικά ενσύρματα δίκτυα. Έτσι λοιπόν στις μέρες μας γίνεται λόγος για υπηρεσίες πραγματικού χρόνου όπως mobile TV, mobile gaming, mobile streaming κ.α. Ένα από τα σημαντικότερα βήματα των δικτύων κινητών επικοινωνιών προς την κατεύθυνση της παροχής νέων, προηγμένων πολυμεσικών υπηρεσιών είναι η εισαγωγή της υπηρεσίας Multimedia Broadcast / Multicast Service (MBMS). Η υπηρεσία MBMS έχει σαν κύριο σκοπό την υποστήριξη IP εφαρμογών πανεκπομπής (broadcact) και πολυεκπομπής (multicast), επιτρέποντας με αυτό τον τρόπο την παροχή υπηρεσιών υψηλού ρυθμού μετάδοσης σε πολλαπλούς χρήστες με οικονομικό τρόπο. Η multicast μετάδοση δεδομένων σε κινητά δίκτυα επικοινωνιών είναι μια σχετικά νέα λειτουργικότητα η οποία βρίσκεται ακόμη στο στάδιο των δοκιμών και της προτυποποίησης της. Ένας multicast μηχανισμός μεταδίδει τα δεδομένα μόνο μία φορά πάνω από κάθε ασύρματο σύνδεσμο που αποτελεί τμήμα των μονοπατιών προς τους προορισμούς-κινητούς χρήστες. Το κρισιμότερο σημείο που εντοπίζεται κατά τη multicast μετάδοση δεδομένων στα κινητά δίκτυα επικοινωνιών είναι ο αποτελεσματικός έλεγχος ισχύος. Οι σταθμοί βάσης των κυψελωτών αυτών δικτύων διαθέτουν περιορισμένους πόρους ισχύος, γεγονός που περιορίζει τη χωρητικότητα της κυψέλης (cell) και επιβάλλει τη χρήση μίας βέλτιστης στρατηγικής για την όσο το δυνατόν καλύτερη αξιοποίηση των διαθέσιμων πόρων ισχύος. Ο έλεγχος ισχύος στοχεύει στη μείωση της εκπεμπόμενης ισχύος, στην ελαχιστοποίηση του θορύβου στο κυψελωτό δίκτυο και κατά συνέπεια στη διασφάλιση μεγαλύτερης χωρητικότητας επιπλέον χρηστών. Ένα από τα βασικότερα στοιχεία του ελέγχου ισχύος στα δίκτυα κινητών επικοινωνιών επόμενης γενιάς κατά τη multicast μετάδοση πολυμεσικών δεδομένων αποτελεί η επιλογή του κατάλληλου καναλιού μεταφοράς για τη μετάδοση των δεδομένων στον κινητό χρήστη. Συγκεκριμένα, πρόκειται για ένα κρίσιμο ζήτημα το οποίο είναι ακόμα υπό εξέταση στο 3GPP. Προς την κατεύθυνση αυτή, στο MBMS πρότυπο έχουν αναπτυχθεί διάφοροι μηχανισμοί, με χαρακτηριστικό τον MBMS Counting Mechanism. Στόχος του μηχανισμού αυτού είναι η βελτιστοποίηση της ροής δεδομένων για την υπηρεσία MBMS, όταν αυτά διέρχονται από τις διεπαφές του UMTS/HSPA δικτύου. Ωστόσο, η υπάρχουσα μορφή του μηχανισμού αυτού, καθώς και των αρκετών άλλων μηχανισμών που έχουν προταθεί από το 3GPP, διακρίνεται από πολλές αδυναμίες που δεν επιτρέπουν την αποτελεσματική και μαζική μετάδοση πολυμεσικών δεδομένων. Τα σημαντικότερα προβλήματα των μηχανισμών αυτών είναι η απουσία ευρυζωνικών χαρακτηριστικών καθώς και η σπατάλη σημαντικού τμήματος των ούτως ή άλλως περιορισμένων πόρων ισχύος. Εν γένει, η επιλογή του κατάλληλου καναλιού μεταφοράς των πολυμεσικών δεδομένων στο ασύρματο μέσο είναι μια δύσκολη διαδικασία καθώς μια λανθασμένη επιλογή καναλιού μπορεί να οδηγήσει στην αστοχία μίας ολόκληρης κυψέλης. Γίνεται σαφές λοιπόν, ότι απαιτείται μία βελτιωμένη έκδοση των υπαρχόντων μηχανισμών για την αποτελεσματικότερη και οικονομικότερη μετάδοση πολυμεσικού περιεχομένου σε μεγάλο πλήθος χρηστών. Λαμβάνοντας υπόψη τα παραπάνω, στόχος της παρούσας διδακτορικής διατριβής είναι η μελέτη του ελέγχου ισχύος στα δίκτυα κινητών επικοινωνιών επόμενης γενιάς καθώς και η ανάπτυξη νέων μεθόδων/μηχανισμών για τη βελτιστοποίηση του. Ιδιαίτερο χαρακτηριστικό της διατριβής αυτής είναι η ενσωμάτωση και η "εκμετάλλευση" όλων των ιδιαίτερων χαρακτηριστικών της HSPA τεχνολογίας στην MBMS υπηρεσία. Προς αυτή την κατεύθυνση, στην παρούσα διδακτορική διατριβή αναλύονται και αξιολογούνται όλα τα υπάρχοντα κανάλια μεταφοράς του UMTS και της τεχνολογίας HSPA τα οποία μπορούν να χρησιμοποιηθούν για τη multicast μετάδοση MBMS υπηρεσιών. Η αξιολόγηση γίνεται με βάση την απαιτούμενη ισχύ που πρέπει να ανατεθεί από το σταθμό βάσης για καθένα από αυτά, και κατά συνέπεια με βάση το ρυθμό μετάδοσης τους, τον αριθμό των χρηστών που μπορούν να εξυπηρετήσουν, την ποιότητα υπηρεσιών για κάθε χρήστη, τη μέγιστη δυνατή κάλυψη της κυψέλης κ.α. Οι ιδιαίτερα αυξημένες απαιτήσεις των MBMS υπηρεσιών μας οδήγησαν στη συνέχεια στη διερεύνηση και αξιολόγηση ορισμένων τεχνικών μείωσης της εκπεμπόμενης ισχύος, με απώτερο σκοπό την αποδοτικότερη χρήση των πόρων του συστήματος κατά τη μετάδοση MBMS υπηρεσιών. Ενδεικτικά αναφέρουμε πως μία MBMS υπηρεσία με ρυθμό μετάδοσης 128 Kbps μπορεί να καταναλώσει έως και το 80% των πόρων ισχύος ενός σταθμού βάσης. Επομένως, γίνεται κατανοητό ότι η μετάδοση MBMS υπηρεσιών με τόσο υψηλούς ρυθμούς μετάδοσης καθίσταται δύσκολη έως και αδύνατη. Για την αντιμετώπιση αυτού του προβλήματος έχουν αναπτυχθεί τεχνικές, όπως η FACH Dynamic Power Setting, η Macro Diversity Combining και το Rate Splitting, ικανές να μειώσουν τα επίπεδα ισχύος κατά τη μετάδοση multicast δεδομένων στους MBMS χρήστες. Η διδακτορική αυτή διατριβή εξετάζει την αποδοτικότητα της χρήσης αυτών των τεχνικών εξοικονόμησης ισχύος και παρουσιάζει πειραματικά αποτελέσματα που αποκαλύπτουν το ποσό ισχύος που εξοικονομείται από κάθε μία τεχνική. Η αξιολόγηση τόσο των καναλιών μεταφοράς όσο και των τεχνικών μείωσης ισχύος θα οδηγήσει στην εύρεση ενός κατάλληλου σχήματος/μηχανισμού, ο οποίος θα εξασφαλίζει την αποδοτική εναλλαγή μεταξύ των διάφορων τύπων καναλιών κατά τη μετάδοση MBMS υπηρεσιών. Ο μηχανισμός αυτός, τον οποίο καλούμε MBMS Channel Assignment Mechanism (ή χάριν συντομίας "MCAM"), αναμένεται να εξασφαλίσει βελτιωμένη απόδοση σε σχέση με τους αντίστοιχους μηχανισμούς που έχουν προταθεί από το 3GPP, μείωση της καταναλισκόμενης ισχύος και κατά συνέπεια αύξηση της χωρητικότητας των κινητών δικτύων επόμενης γενιάς. Ωστόσο, το πιο αξιοπρόσεκτο πλεονέκτημα του προτεινόμενου μηχανισμού, που ουσιαστικά τον διαφοροποιεί από τις άλλες προσεγγίσεις, είναι ότι προσαρμόζεται στις αυξημένες απαιτήσεις των κινητών δικτύων επόμενης γενιάς για ταυτόχρονη παροχή πολλαπλών πολυμεσικών συνόδων. Το γεγονός αυτό μπορεί να επιτρέψει τη μαζική μετάδοση πολυμεσικών δεδομένων σε πληθώρα κινητών χρηστών, θέτοντας κατά τον τρόπο αυτό τον MCAM σαν έναν ισχυρό υποψήφιο για τα δίκτυα επόμενης γενιάς.

Modern access network technologies like Long Term Evolution (LTE) and High Speed Packet Access (HSPA) use time-slotting mechanisms to optimize resource sharing and overall network performance. In time-slotted networks, the one-way delay of all packets in a packet stream depends on the absolute point in time when the first packet of the stream is sent. With appropriate feedback signals, applications can exploit this effect to reduce their effective end-to-end delay. Time-critical applications such as real-time sensor data acquisition or voice-over-IP (VoIP) communications can shift their acquisition interval in order to adapt to the network timing. Information about the actual time-slotting periods can be gathered by active network measurements or through implementation of cross-layer information exchange. In this paper, a method is proposed to determine the optimum send time for particular destinations and to support applications in adjusting their send time accordingly. Theoretical findings are supported by the offline analysis of measurement data and by a proof-of-concept implementation that confirms the feasibility and effectiveness of the proposed solution in operational LTE and HSPA networks.

The mobile industry has seen significant growth; it evolved from analog to digital second generation (2G) Global System for Mobile (GSM), then to high-data rate cellular wireless communication such as third generation (3G) Wideband Code Division Multiple Access (WCDMA), and further to packet optimized 3.5G High Speed Packet Access (HSPA) and fourth generation (4G) Long-Term Evolution (LTE) and LTE advanced systems [1]. The 4G wireless communication systems have been deployed in many countries. However, with the widespread use of wireless devices and mobile services, there are still some challenges that cannot be absorbed until the 4G, such as the spectrum crisis and high-energy consumption [2]. The race to search for innovative solutions to enable the fifth generation (5G) wireless communication networks era has begun. Once developed, the 5G network will permit gigabitper-second transmission on compatible mobile devices. 5G is expected to meet the requirements to enable higher capacity, higher rate, more connectivity, higher reliability, lower latency, greater versatility, and application domain-specific topologies. New concepts and design approaches are in dire need. Future 5G will most likely use millimeter-wave frequencies. Beamforming could be one of the solutions for the future 5G cellular communications. Theoretical feasibility and prototype results for millimeter-wave (mmWave) beamforming as an enabling technology for 5G cellular communications have been discussed in [3]. Achieving higher data rates with mmWave beamforming for next generation communications is proposed in [4]. Author has contributed in designing several slot/monopole antenna designs for ultrawideband (UWB) applications [5–15]. Different monopole antenna shapes with ultra-wide bandwidth have been proposed in [5–7]. An elliptical slot antenna with elliptical shaped microstrip-line fed radiator for UWB operation has been introduced in [5]. Another monopole antenna with a trapezoidal shaped patch with two elliptical shaped cuts from its edge forming a J Infrared Milli Terahz Waves (2016) 37:308–317 DOI 10.1007/s10762-016-0252-2

LTE (Long Term Evolution) is a 3GPP (Third Generation Partnership Project) wireless standards that gives us wideband CDMA (Code Division Multiple Access) and HSPA (High Speed Packet Access) a third generation connectivity. LTE is the fourth generation (4G) of wireless communication technologies that brings the standard OFDMA (Orthogonal Frequency Division Multiple Access) modulation , MUMIMO (Multiuser Multiple Input Multiple Output) technology and different multipath fading model EVA (Extended Vehicular a), ETU (Extended Typical Urban) and EPA (Extended Pedestrian A) which allows the operator to use spectrum more efficiently to deliver high speed data. This paper characterizes the downlink performance of LTE. There are many metric to characterize the performance, but one of the most convenient and informative metric is the BER (Bit Error Rate). So the performance is characterized in terms of BER. In this paper the LTE system is modeled and simulated using MATLAB and the BER for 2×2 and 4×4 MIMO using QPSK and 16QAM modulation is obtained against different SNR values. General Terms Mobile Communication

Wideband code division multiple access (WCDMA), high speed packet access (HSPA) and HSPA+ are third generation partnership project (3GPP) standards. These systems are the major wireless communication standards. In order to test the performance of WCDMA/HSPA/HSPA+ signal in a base station, the measurement hardware is required to the evaluation of the transmitted signals. In this paper, the algorithm for the performance measurement of the WCDMA/HSPA/HSPA+ is proposed. Also, the performance of the measurement algorithm is used to evaluate the generated signal by the WCDMA/HSPA/HSPA+ signal generator. Generally, the algorithm of normal modems cannot be applied to the measurement system because the signal measurement equipment needs to guarantee the high accuracy. So, the WCDMA/HSPA/HSPA+ signal measurement algorithm for the accurate measurement is proposed. By the simulation, it is confirmed that the proposed measurement algorithm has good performance compared with the specification. Therefore, the proposed algorithm can be usefully applied to verify the performance of the measurement using the simulation.

Multi-radio access technology (RAT) cellular communication systems limit connected users to utilizing a single RAT even when employing multi-mode user equipment (UE) capable of utilizing multi-RATs. Single-mode access, combined with static spectrum partitioning between co-deployed RATs and independent resource allocation for employed RATs, results in suboptimal spectrum utilization in multi-RAT systems. This paper models user access in multi-RAT systems and proposes enabling multi-mode UE to simultaneously utilize multiple RATs, using multi-RAT carrier aggregation, to improve the performance and spectrum utilization of multi-RAT systems. Several realizations of multi-mode access with varying implementation requirements are presented and discussed. Detailed system-level simulations, for a system co-deploying High Speed Packet Access (HSPA) and Long-Term Evolution (LTE), are performed to investigate the gains and limitations of different user access configurations in multi-RAT systems.

As internet services are being provided through a wireless acce ss, the importance of quality of experience (QoE) is stressed that is defined as the quality that indicates user's actual feeling when a service is provided. Unlike quality of service (QoS) that can be expressed as a numerical value, it is difficult to represent QoE in an objective way. If an internet service is serviced over a wireless channel, its QoE can be affected by a number of factors such as fading, mobility and so on. This paper, therefore, attempts to specify the relationship between QoE and QoS by conducting practical measurements for the voice service through 3G high speed packet access (HSPA) access network. Analysing the measured results, it has been shown that received signal strength indicator (RSSI) has a great influence on mean opinion score (MOS) through transmission delay.

The efficiency of high speed packet access (HSPA) systems is mainly based on Packet Scheduling Scheme which will be the key to influencing on the system performance and ensuring the service quality for the users. In this paper, we introduce a three step packet scheduling scheme to provide quality of services (QoS) guaranteed for high speed uplink packet access. Then, we proposed an improved packet scheduling algorithm based on QoS parameter for mixed service applications in order to meet the actual QoS needs of the different systems. This algorithm calculated the scheduling priority based on the comprehensive factors, including the queuing status of each user, QoS requirements and the sum of speeds on each channel. The simulation results show that the performance efficiency of HSPA systems employed proposed algorithm is superior compared to the conventional PF and M-LWDF algorithm in average packet drop and average cell throughput.

This paper presents a study on the HSPA+ technology and the impact it have on today's mobile communication networks. To this end we study how to use features such as MIMO (Multiple Input Multiple Output) and HOM (Higher Order Modulation) and how they can increase the data rate transfer per user. The extracted results show that we can increase the data transmission rate by varying the configuration of antennas and the modulation type, obtaining the maximum theoretical order of 43.8 Mbps and 23 Mbps in Downlink (DL) and Uplink (UL), respectively using 4x4 MIMO and 64-QAM (Quadrature Amplitude Modulation) modulation. These results are obtained based on the direct application or manipulation of existing models and integrated in a simulator implemented for this purpose.

Initially developed for use in fixed networks, the ARQ (Automatic Repeat Request) technique was adopted in UMTS systems aiming the QoS improvement for data transmission. However, real time services like VoIP cannot benefits of ARQ, because of the related delay problems in WCDMA systems. With the advent of HSPA (High Speed Packet Access) and the LTE (Long Term Evolution) networks, there was a consequent redefinition of the ARQ functionalities, aiming to become possible to use it for real time services. Delay problems were minimized as a consequence of the facilities introduced for the new methods of ARQ generation. The main objective of this work is the definition of a methodology toward ARQ optimization relatively to the mean power required to transfer the information from the origin to the destination, accordingly to a given error probability.To reduce the amount of the power transfer in the uplink direction is of paramount importance for the minimization of interference levels as well as to economize battery of cellular equipment.Though the treatment here presented is focused to E-DCH (Enhanced Uplink Dedicated Channel) of HSPA systems, the results obtained are applicable to other related networks using ARQ techniques.

Nowadays, smart mobile devices drive the mobile traffic growth rapidly. Most smart mobile devices are equipped with multiple radio network interfaces, such as High Speed Packet Access (HSPA), Long Term Evolution (LTE), and Wi-Fi. Therefore, integration of multiple networks is a viable solution to fulfill traffic offloading and the Quality-of-Service (QoS) requirement of data usage for mobile users. In this paper, we propose a multi-link mechanism to handle the radio network selection and switching between LTE and Wi-Fi networks. A Multi-Link Adaptor (MLA) and a Multi-Connection Manager (MCM) are proposed for the User Equipment (UE) and the core network, respectively, to handle the multi-link mechanism. The applications executed in the UEs do not need to be modified under the proposed approach. The MLA maintains a QoS class table and a routing table for the network selection procedure and uses the GPRS Tunneling Protocol-Control plane (GTP-C) control messages to execute network switching. In the future, we will measure the throughput of the multi-link network and the switch delay between the heterogeneous radio networks.

High speed packet access (HSPA) was introduced as the evolution of WCDMA system in 3GPP Rel 5 and 6 for downlink and for uplink. Moreover, HSPA+ Rel 7 makes WCDMA more competitive which adopted multi-input multi-output (MIMO) to support two blocks of data in a TTI and 64QAM for modulation to increase the peak rate. In HSPA+ Rel 8, combination of MIMO and 64QAM can further enhance the data rate in the good channel condition. Theoretically, the terminal can support the maximum downlink data rate of about 42Mbps.

The wireless-access networks of today will have to evolve in several ways in order to address the challenges and expectations of the future. New technology components will be introduced as part of the evolution of current wireless-access technologies, such as high-speed packet access (HSPA) and long-term evolution (LTE). However, additional components may also constitute future new wireless-access technologies, which may complement the evolved technologies. Examples of such new technology components are new ways of accessing spectrum and substantially higher frequency ranges, the introduction of massive antenna configurations, direct device-to-device communication, and ultradense deployments.

In this article, compliance boundaries and allowed output powers are determined for the front, back, and side of multiple-frequency base station antennas, based on the root-mean-squared electric field, the whole-body averaged specific absorption rate (SAR), and the 10 g averaged SAR in both the limbs and the head and trunk. For this purpose, the basic restrictions and reference levels defined by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) for both the general public and occupational exposure are used. The antennas are designed for Global System for Mobile Communications around 900 MHz (GSM900), GSM1800, High Speed Packet Access (HSPA), and Long Term Evolution (LTE), and are operated with output powers at the individual frequencies up to 300 W. The compliance boundaries are estimated using finite-difference time-domain simulations with the Virtual Family Male and have been determined for three directions with respect to the antennas for 800, 900, 1800, and 2600 MHz. The reference levels are not always conservative when the radiating part of the antenna is small compared to the length of the body. Combined compliance distances, which ensure compliance with all reference levels and basic restrictions, have also been determined for each frequency. A method to determine a conservative estimation of compliance boundaries for multiple-frequency (cumulative) exposure is introduced. Using the errors on the estimated allowed powers, an uncertainty analysis is carried out for the compliance distances. Uncertainties on the compliance distances are found to be smaller than 122%. Bioelectromagnetics. 34:465–478. © 2013 Wiley Periodicals, Inc.

Two important aspects about UMTS/HSPA (Universal Mobile Telecommunications Service/High Speed Packet Access) and LTE (Long Term Evolution) systems are analyzed. First, an analysis of the frequency bands allocated in Ecuador for the cellular systems is made. Then, expressions for the mean bit error rate in a AWGN channel and the presence of co-channel interference is carried out both for WCDMA (Wideband - Code Division Multiple Access) and OFDMA (Orthogonal Frequency Division Multiple Access). Because the necessity of support the increase of traffic due to the emergence of new mobile broadband services, the deployment of LTE networks is necessary. Hence, in Ecuador, new spectrum bands were allocated to the cellular systems. Initially, the bands of 850 MHz and 1900 MHz were available for GSM (Global System for Mobile Communications), EDGE (Enhanced Date Rates For GSM Evolution) and UMTS/HSPA techniques. Nowadays, the country also has the bands of 700 MHz, 1700–2100 MHz (AWS - Advanced Wireless Services) and 2.5 GHz to deploy cellular systems. Also, it is shown that WCDMA provides higher immunity against the co-cell interference, but due to the computational simplicity of the OFDMA technique, it is employed in the new cellular systems.

The ever increasing number of mobile broadband users requires the availability of enhanced data services. Long Term Evolution or LTE is the evolution of High Speed Packet Access (HSPA), which was standardized by third generation partnership project (3GPP) Release 8 in order to meet the increasing demand of faster and more efficient mobile internet access today by supporting the larger bandwidth. This paper analyses the performance of LTE network in varying spectral frequency bands. Using network simulator-2, ns-2, the parameters that had greater impact on the performance were studied. The main key parameters which were used to evaluate the key performance analysis are throughput, average throughput and jitter. Based on the simulation results, we have concluded that throughput remains same at different frequency bands if bandwidth and modulation type is same. Average throughput also does not change with the change in frequency band, but average throughput is lower in comparison to throughput because same bandwidth is shared by all the nodes. Thus, we can say average throughput decreases with increase in number of nodes. Jitter does not have any specific trend normally it increases with the increase in frequency band, sometimes it is same as frequency band increases and it also decreases when frequency band increases.

5G will lead us into an “all-time connectivity society” where mobile devices will play an even more important role in people’s lives. 5G will be not only a cellular standard but a combination of cellular and other heterogeneous standards. In this chapter we will focus on the cellular characteristics of 5G.

In this paper an innovative Radio Resource Management (RRM) algorithm is proposed with the purpose of increasing High Speed Packet Access (HSPA) performances, in terms of system capacity and service quality, when the Multimedia Broadcast Multicast Services (MBMS) is supplied. The proposed RRM algorithm exploits channel quality indications to set up point-to-multipoint connections to subgroups of multicast users and to select the proper modulation and coding schemes on the downlink. The number of subgroups is determined through an optimization technique that also takes into account the user satisfaction. An exhaustive simulation campaign is conducted to compare the proposed algorithm with the most promising approaches in the literature. Comparisons aim to assess the capability of the proposed RRM algorithm to efficiently manage group oriented services by providing an increment in terms of user satisfaction., Comment: Broadband Multimedia Systems and Broadcasting (BMSB), 2011 IEEE International Symposium on

This paper presents an empirical study on the performance of mobile High Speed Packet Access (a 3.5G cellular standard usually abbreviated as HSPA) networks in Hong Kong via extensive field tests. Our study, from the viewpoint of end users, covers virtually all possible mobile scenarios in urban areas, including subways, trains, off-shore ferries, and city buses. We have confirmed that mobility has largely negative impacts on the performance of HSPA networks, as fast-changing wireless environment causes serious service deterioration or even interruption. Meanwhile, our field experiment results have shown unexpected new findings and thereby exposed new features of the mobile HSPA networks, which contradict commonly held views. We surprisingly find out that mobility can improve fairness of bandwidth sharing among users and traffic flows. Also, the triggering and final results of handoffs in mobile HSPA networks are unpredictable and often inappropriate, thus calling for fast reacting fallover mechanisms. Moreover, we find that throughput performance does not monotonically decrease with increased mobility level. We have conducted in-depth research to furnish detailed analysis and explanations to what we have observed. We conclude that mobility is a double-edged sword for HSPA networks. To the best of our knowledge, this is the first public report on a large-scale empirical study on the performance of commercial mobile HSPA networks.

The Long Term Evolution (LTE) system is already able to provide a background of variety services for mobile users with multimedia services such as audio, video, and data. In fact, the High Speed Packet Access plus (HSPA+) solution can greatly enhance bit rates on down-link. However, the supporting for multimedia applications with different QoS (Quality of Service) requirements is not devised yet. Hence, in this paper we propose an effective packet scheduling algorithm based on Proportional Fairness (PF) scheduling algorithms for the LTE. In this proposed packet scheduling scheme, we optimized instantaneous user data rates and the traffic class weight which prioritize user`s packets. Finally, we evaluated and showed the performance of the proposed scheduling algorithm through simulations of multimedia traffics being transmitted to users over LTE links in a multi-cell environment.

In this paper, we consider a low-complexity multiuser detection for downlink of high speed packet access (HSPA) of universal mobile telecommunications system (UMTS). Instead of attempting to perform maximum likelihood (ML) detection of all users in multiple cells, which is impractical for battery powered mobile receiver, we utilize interference cancelled chips obtained from iterative linear minimum mean square error (LMMSE) estimation to perform a near ML detection in a reduced dimensional system. As a result, the worst case complexity of the detection process, achieved by the closest lattice point search (CLPS), is bounded to a controllable level irrespective of multipath spans. Furthermore, by exploiting the LMMSE estimate in tightening the hypersphere condition of the CLPS algorithm so called sphere decoding, we achieve significant improvement in search complexity. From simulations on realistic downlink communication scenario in HSPA systems, we show that the proposed method offers substantial performance gain over conventional receiver algorithms with reasonable complexity.

In this paper, we propose a fuzzy Q-learning-based MIMO configuration mode and MCS level (FQL-MOMS) selection scheme for high speed packet access evolution (HSPA+) systems. The FQL-MOMS selection scheme intends to enhance the system throughput under the block error rate (BLER) requirement guarantee. It will determine an appropriate MIMO configuration mode and MCS (modulation and coding scheme) level for packet data transmission in HSPA+ systems, under the situations that the channel status is varying and the channel quality indication (CQI) has report delay. The FQL-MOMS scheme considers not only the reported CQI and the last transmission result but also the BLER performance metric and the transmission efficiency. Moreover, it is effectively configured, where the fuzzy rules and the reinforcement signals for the Q-learning algorithm are sophisticatedly designed. Simulation results show that the proposed FQL-MOMS scheme increases the system throughput by up to 49.3 and 35.9 percent, compared to the conventional adaptive threshold selection (ATS) scheme [12] and the Q-HARQ scheme [14], respectively, under the BLER requirement fulfillment.

In this paper, we propose an iterative interstream interference cancellation technique for system with frequency selective multiple-input multiple-output (MIMO) channel. Our method is inspired by the fact that the cancellation of the interstream interference can be regarded as a reduction in the magnitude of the interfering channel. We show that, as iteration goes on, the channel experienced by the equalizer gets close to the single input multiple output (SIMO) channel and, therefore, the proposed SIMO-like equalizer achieves improved equalization performance in terms of normalized mean square error. From simulations on downlink communications of 2 x 2 MIMO systems in high speed packet access universal mobile telecommunications system standard, we show that the proposed method provides substantial performance gain over the conventional receiver algorithms.

As the migration from code division multiple access (CDMA) to orthogonal frequency-division multiple access (OFDMA) involves a technological revolution in physical layer, the high speed packet access (HSPA) evolution (HSPA+) has been proposed for a smooth migration. HSPA+ is an effort to further improve radio performance of HSPA, and wideband CDMA (WCDMA) HSPA+ and time division-synchronous CDMA (TD-SCDMA) HSPA+ (TD-HSPA+) are two HSPA+ systems evolving from WCDMA and TD-SCDMA, respectively. Different from WCDMA HSPA+ system, TD-HSPA+ system utilizes eight antennas at Node B and two antennas at user equipment (UE) for 8 x 2 Multi-Input and Multi-Output (MIMO) transmission to achieve antenna array gain and diversity gain. Furthermore, to facilitate 8 x 2 MIMO configuration, the antenna elements are partitioned into two groups for dual-polarization transmissions. This paper focuses on 8 x 2 MIMO schemes in TD-HSPA+ systems, including the traditional single polarized MIMO (SP-MIMO), the separated and the joint singular value decomposition (SVD) based precoding dual-polarized MIMO (DP-MIMO) schemes. Performances of these TD-HSPA+ MIMO schemes are evaluated for both urban macro and micro scenarios. The simulation results show that the separated SVD based precoding DP-MIMO scheme performs better than the joint SVD based precoding DP-MIMO scheme, and the DP-MIMO scheme offers almost the same performance as the SP-MIMO due to the beamforming diversity gain and multiplex gain in TD-HSPA+ systems.

This paper describes a quality of service (QoS) implementation in the UMTS Terrestrial Radio Access Network (UTRAN) to commercialize mobile television (TV) services with current High Speed Packet Access (HSPA) commercial devices, which do not support a streaming traffic class as defined by the 3rd Generation Partnership Project (3GPP). This implementation allows the mobile operators to offer a high quality of service for the end user in terms of reducing the need for re-buffering during the mobile TV session, while minimizing the impact of the service on the overall radio cell capacity. System level simulations relying on a Tier 1 operator use case have been generated to quantify the benefits streaming users experience due to this QoS implementation in the presence of background traffic in the same radio cell. The impact in terms of radio cell capacity is also evaluated.

HSPA(High Speed Packet Access)/HSPA+ is a combined 3GPP(Third Generation Partnership Project) standard of HSDPA(High Speed Downlink Packet Access) and HSUPA(High Speed Uplink Packet Access). The standard can provide the high speed multimedia service against the 3GPP release 99 standard. In order to test the 3GPP HSPA/HSPA+ terminal performance, the measurement hardware is required for the evaluate the transmitted signal of HSPA/HSPA+ terminals. Agilent Technologies and Innowireless produce the measurement equipments for HSPA/HSPA+ terminals. Generally speaking, the receiving algorithms in normal modems cannot be used directly to the measurement system due to the lack of the algorithm accuracy. In this paper, we propose the new receiver algorithm for precise measurement of 3GPP HSPA/HSPA+ terminal signal, and implement measurement functionality for performance measurement of the 3GPP HSPA/HSPA+ terminal by using software. The proposed 3GPP HSPA/HSPA+ signal measurement algorithm can be used for the commercial system through code execution speed optimization.

This paper presents the unified user equipment (UE) baseband modulation and demodulation (modem) hardware platform architecture to support multiple radio access technologies. In particular, this platform selectively supports two systems; one is HEDGE system, which is the combination of third generation partnership project (3GPP) Release 7 high speed packet access evolution (HSPA+) and global system for mobile communication (GSM)/general packet radio service (GPRS)/enhanced data rates for GSM evolution (EDGE), while the other is LEDGE system, which is the combination of 3GPP Release 8 long term evolution (LTE) and GSM/GPRS/EDGE. This is done by applying the flexible pin multiplexing scheme to a hardwired pin mapping process. On the other hand, to provide stable connection, high portability, and high debugging ability, the stacking structure is employed. Here, a layered board architecture grouped by functional classifications is applied instead of the conventional one flatten board. Based on this proposed configuration, we provide a framework for the verification step in wireless cellular communications. Also, modem function/scenario test and inter-operability test with various base station equipments are verified by system requirements and scenarios.

The high-speed downlink packet access (HSDPA) system can effectively support real-time voice services if the HS-SCCH-less feature is adopted in the 3GPP Release 7 standard. In this paper, we point out that the feature only offers a limited statistical multiplexing capability and it also causes serious power consumption at the user equipment. This paper proposes an HSDPA scheduling operation that utilizes the entire code space and considers the packet generation pattern of voice services.

The high-speed downlink packet access (HSPDA) system is expected to effectively support voice services when Release 7/8 features are adopted in the system. In this letter, we point out that a voice packet can be transmitted at a lower power level than normal in the HSDPA network. We propose a power allocation scheme that adjusts the transmission power of voice packets optimally and allocates the remaining transmission power to data services in order to improve data throughput. The proposed power allocation is analyzed with a Rayleigh fading channel model and compared to conventional fixed power allocation.

High Speed Packet Access (HSPA) Holma H, Toskala A (in HSDPA/HSUPA for UMTS, 2006) is expected to provide enough bandwidth for voice over IP (VoIP) service. In this article we assess the performance of VoIP over HSPA with different VoIP clients and voice codecs. The simulations results show that VoIP can have a good voice quality over HSPA if a proper VoIP client and codec is used. However it is possible that the delay can increase with early HSPA implementations (mobile, network).

This article focuses on the evolutional strategies (which can be divided into four phases) from the current commercial time division-synchronous code division multiple access (TD-SCDMA) to the future International Mobile Telecommunications (IMT)Advanced systems. The first evolutional phase is to develop an N-frequency technology to improve capacity and ease network planning of the current TD-SCDMA system. Singleand multicarrier high-speed packet access (HSPA) is specified in the second phase for providing high-rate packet services. Long-term evolution (LTE) technology is introduced in the third phase to provide a similar performance of mobile worldwide interoperability for microwave access (WiMAX). Finally, the fourth phase is to implement time division duplex (TDD)-based IMTAdvanced system, which is one of the alternative standards beyond third-generation (3G) systems. The advanced technologies to enhance spectral efficiency are the critical issues emphasized in all the four phases. The challenges and open issues in the different evolutional phases are identified in this article as well.

In this paper, a single-chip dual-mode 8-band 130nm CMOS transceiver including A/D/A converters and digital filters with 312MHz LVDS interface is presented. For a transmitter chain, linear direct quadrature modulation architecture is introduced for both W-CDMA/HSDPA (High Speed Uplink Packet Access) and for GSM/EDGE. Analog baseband LPFs and quadrature modulators are commonly used both for GSM and for EDGE. For a direct conversion receiver chain, ABB (Analog Base-Band) blocks, i.e., LPFs and VGAs, delta-sigma A/D converters, and FIR filters are commonly used for W-CDMA/HSDPA (High Speed Downlink Packet Access) and GSM/EDGE to reduce chip area. Their characteristics can be reconfigured by register-based control sequence. The receiver chain also includes high-speed DC offset cancellers both in analog and in digital stage, and the self-contained AGC controller, whose parameters such as time constant are programmable to be free from DBB (Digital Base-Band) control. The transceiver also includes wide-range VCOs and fractional PLLs, an LVDS driver and receiver for high-speed digital interface of 312MHz. Measured results reveal that the transceiver satisfies 3GPP specifications for W-CDMA/HSPA (High Speed Packet Access) and GSM/EDGE.

A large number of phone calls and data services will take place in indoor environments. In Long Term Evolution (LTE), femtocell, as a home base station for indoor coverage extension and wideband data service, has recently gained significant interests from operators and consumers. Since femtocell is frequently turned on and off by a personal owner, not by a network operator, one of the key issues is that femtocell should be identified autonomously without system information to support handover from macrocell to femtocell. In this paper, we propose a dynamic reservation scheme of Physical Cell Identities (PCI) for 3GPP LTE femtocell systems. There are several reserving types, and each type reserves a different number of PCIs for femtocell. The transition among the types depends on the deployed number of femtocells, or the number of PCI confusion events. Accordingly, flexible use of PCIs can decrease PCI confusion. This reduces searching time for femtocell, and it is helpful for the quick handover from macrocell to femtocell. Simulation results show that our proposed scheme re- duces average delay for identifying detected cells, and increases network capacity within equal delay constraints. The 3rd Generation Partnership Project (3GPP) is work- ing on the standardization of asynchronous communication systems. This technology is being enhanced gradually en- suring higher user data rate, bigger system capacity, and lower cost. The wideband CDMA (WCDMA) system is standardized with 3GPP release 99/4 which is being de- ployed in the world. Release 5 is related to High Speed Downlink Packet Access (HSDPA), and it improves the downlink packet transmission speed theoretically up to 14.4 Mbps. High Speed Uplink Packet Access (HSUPA) is enhanced up to 5.76 Mbps in uplink, and it is standardized with the Release 6. We simply mention both HSDPA and HSUPA as High Speed Packet Access (HSPA). In release 7, High Speed Packet Access Evolution (eHSPA, HSPA+) is standardized. eHSPA is based on the HSPA network with a simple upgrade, and it supports more bandwidth efficiency and lower latency. The maximum data rate is 28.8 Mbps in downlink and 11.5 Mbps in uplink (1). How- ever, users still require further system improvements. The technology is dramatically enhanced in release 8, where the standard of Long Term Evolution (LTE) is currently being established. The main objectives of LTE are higher data rates, lower latency, increased capacity, enhanced coverage, and an optimized system for the packet switching network (2). LTE also considers a femtocell, which is referred to as a home base station for an indoor coverage extension and overall network performance enhancement (3). Recently, LTE-Advanced standard targeting of 1Gbps for low mobil- ity is being discussed in release 9. We look into general features and requirements of fem- tocells. Important issues related to access control are de- scribed, followed by our contributions and organization of the paper.

Long term evolution (LTE) of 3GPP provides high bandwidth for data transfer. In the viewpoint of the LTE terminal baseband modem chip, these high data rates require more complex logics and memories than previous baseband modem chips in preceding technologies such as Wideband Code Division Multiple Access (W-CDMA), High Speed Downlink Packet Access (HSDPA), and High Speed Packet Access (HSPA). It may exhaust user equipment (UE)'s battery power quickly. Thus, LTE provides an enhanced discontinuous reception (DRX) to extend the UE's battery lifetime. In this work, we propose an adjustable power management using a hierarchical cascaded power gating (HCPG) and a hierarchical multi-level clock gating (HMLCG) with special regard for DRX framework. The test results from the designed ASIC show that optimal power saving was achieved by using the proposed adjustable power management.

In 3G networks upgraded with high speed packet access (HSPA) technology, the high access bandwidth and advanced mobile devices make it applicable to share large files among mobile users by peer-to-peer applications. To receive files as quickly as possible is essential for mobile users in file sharing applications, since they are subject to unstable signal strength and battery failures. While many researches present peer-to-peer file sharing architectures in mobile environments, few works focus on decreasing the time spent in disseminating files among users. In this paper, we present an efficient peer-to-peer file sharing design for HSPA networks called efficient file sharing (EFS) for 3G networks. EFS can decrease the dissemination time by efficiently utilizing the upstream-bandwidth of mobile nodes. It uses an adaptive rearrangement of a node’s concurrent uploading transfers, which causes the count of the node’s concurrent uploading transfers to lower while ensuring that the node’s upstream-bandwidth can be efficiently utilized. Our simulations show that, EFS achieves much less dissemination time than other protocols including Bullet Prime and a direct implementation of BitTorrent for mobile environments.

In UMTS (universal mobile telecommunications system) networks upgraded with HSPA (high speed packet access) technology, the high access bandwidth and advanced mobile devices make it applicable to share large files among mobile users by peer-to-peer applications. To receive files quickly is essential for mobile users in file sharing applications, mainly because they are subject to unstable signal strength and battery failures. While many researches present peer-to-peer file sharing architectures in mobile environments, few works focus on decreasing the time spent in disseminating files among users. In this paper, we present an efficient peer-to-peer file sharing design for HSPA networks called AFAM — Adaptive efficient File shAring for uMts networks. AFAM can decrease the dissemination time by efficiently utilizing the upload-bandwidth of mobile nodes. It uses an adaptive rearrangement of a node's concurrent uploads, which causes the count of the node's concurrent uploads to lower while ensuring that the node's upload-bandwidth can be efficiently utilized. AFAM also uses URF — Upload Rarest First policy for the block selection and receiver selection, which achieves real rarest-first for the spread of blocks and effectively avoids the “last-block” problem in file sharing applications. Our simulations show that, AFAM achieves much less dissemination time than other protocols including BulletPrime and a direct implementation of BitTorrent for mobile environments.

Wireless technologies are rapidly evolving to allow operators to deliver more advanced multimedia services. High-speed packet access (HSPA) for uplink and downlink is seen as an intermediate evolutionary step since the first wave of wideband code division multiple access (WCDMA)-based networks rollout, while evolved universal mobile telecommunications system (UMTS) terrestrial radio access networks (E-UTRAN) are the long term perspective for the Third Generation Partnership Project (3GPP) technology family. Similar paths are drawn from the 3GPP2 around the evolution of code division multiple access 2000 (CDMA2000). Moreover, the IEEE 802 working groups are producing an evolving family of standards, such as 802.11 local, 802.15 personal, 802.16 and 802.20 metropolitan and 802.22 regional area networks.

This paper presents indoor and field experimental results on extremely high-speed packet transmissions of 4.92 Gbps in a 100 -MHz channel bandwidth, i.e., the frequency efficiency of approximately 50 bit/second/Hz, in the downlink OFDM radio access. The required received signal-to-noise power ratio (SNR) is less than 30dB, which is almost the upper limit in cellular environments near a cell site even with a light channel load, with the aim of application to future universal broadband packet radio access. We apply 12-by-12 MIMO multiplexing using the maximum likelihood detection employing QR decomposition and the M-algorithm (QRM-MLD) with adaptive selection of the surviving symbol replica candidates (ASESS),64QAM data modulation, and Turbo coding with the coding rate of R = 8/9 to achieve an extremely high frequency efficiency level. In the field experiments conducted in the Yokosuka Research Park (YRP) district of Yokosuka city, we show that the measured throughput of 4.92 Gbps is achieved at the average received SNR per receiver antenna of approximately 28.0 and 28.5 dB when the respective receiver antenna separation is 40 cm (6.2lambda) and 10 cm (1.5lambda) and the transmitter antenna separation is 70 cm (10.9lambda) at the average speed of 10 km/h under non-line-of-sight (NLOS) conditions.

The present paper studies the prospective and the performance of a forthcoming high-speed third-generation (3G) networking technology called High Speed Packet Access (HSPA) for delivering emergency m-health applications. The joint transmission of voice, real-time video, medical data such as electrocardiogram, vital signals, heart sound and file transfer is performed for both uplink and downlink. Various scenarios are involved in terms of emergency situations in random locations, where no other system but 3G is available. The accomplishment of quality of service (QoS) is explored through a step-by-step improvement of HSPA systems parameters, incorporating admission and congestion control elements and the use of prioritization for m-health services. HSPA managed to meet the requirements for emergency m-health scenarios and adequately served the generated load.

This paper explains how 3G high speed packet access (HSPA) works. High-speed packet access in both its flavours, HSPDA for the downlink and HSUPA for the uplink, is a hot topic in 3G. The real breakthrough has been achieved by dramatic improvements in the physical layer. This article explains what they are and how they lead to the kind of data rates needed to guarantee 3G a future in the evolution towards all-IP networks.

Packet data traffic volume and a packet switch related services climb upward in UMTS (Universal Mobile Telecommunications System) networks. Services provided on a live network became very complex and require different QoS (Quality of Service). 3GPP defines four service types: conversational, interactive, streaming, and background, which can be managed, in terms of quality, to ensure differentiated services for end users. HSPA (High Speed Packet Access) Diff- Serv management provides facilities based on service type and user priority. Different user profiles allow to maintain high level services and to control users in networks based on the load. The goal of this research is to estimate the efficiency of quality management based services for individual user on UMTS network. End user experience is most concerned question of this research. The users attempting background traffic class service are investigated. According to this, three different users (Gold, Silver, Copper) are distinguished, which are formed by combining SPI (Scheduling Priority Indicator) and ARP (Allocation/Retention Priority) parameters related to QoS assurance. Practical part of study is performed on a commercial mobile network. Provided results reflect the user experience and impact for the 3G network.

Traditional anomaly detection and diagnosis framework of cellular network is on purpose to optimize KPIs (Key Performance Indicators). However, cellular network operators are now attaching great importance to the QoE (Quality of Experience) of OTT (Over the Top) services on their networks rather than current percent-based KPIs since KPI anomaly cannot represent QoE anomaly all the time. Currently, network operators cannot measure anomalous QoS (Quality of Service) metrics which have direct mapping relationships with QoE anomaly by Network-side instrumentation, let alone QoE anomaly. To address this limitation, this paper presents a QoE anomaly detection and diagnosis framework along with a case study to evaluate its feasibility. Our study, including QoE anomaly detection and cross-layer root cause analysis, are based on a month-long WeChat video call service dataset captured by our OTTCAP (Over the Top services capturing and analyzing Platform) under live DC-HSPA+ (Dual-Cell High Speed Packet Access Plus) network. Results of our work can be directly used by network operators to do QoE prediction and network optimization at Network-side.

International audience; The purpose of this study is to assess the mean RF power radiated by mobile telephones during voice calls in 3G VoIP (Voice over Internet Protocol) using an application well known to mobile Internet users, and to compare it with the mean power radiated during voice calls in 3G VoCS (Voice over Circuit Switch) on a traditional network. Knowing that the specific absorption rate (SAR) is proportional to the mean radiated power, the user's exposure could be clearly identified at the same time. Three 3G (High Speed Packet Access) smartphones from three different manufacturers, all dual-band for GSM (900 MHz, 1800 MHz) and dual-band for UMTS (900 MHz, 1950 MHz), were used between 28 July and 04 August 2011 in Paris (France) to make 220 two-minute calls on a mobile telephone network with national coverage. The places where the calls were made were selected in such a way as to describe the whole range of usage situations of the mobile telephone. The measuring equipment, called “SYRPOM”, recorded the radiation power levels and the frequency bands used during the calls with a sampling rate of 20,000 per second. In the framework of this study, the mean normalised power radiated by a telephone in 3G VoIP calls was evaluated at 0.75% maximum power of the smartphone, compared with 0.22% in 3G VoCS calls. The very low average power levels associated with use of 3G devices with VoIP or VoCS support the view that RF exposure resulting from their use is far from exceeding the basic restrictions of current exposure limits in terms of SAR.

The reliability of packet data transmissions under large scale fading is a key issue in wireless mobile networks and has been studied by many researchers, but mostly through simulation and analytical modelling. In this research paper, a realistic methodological approach has been employed to better characterize and quantify the impact of the shadow fading effect on High Speed Packet Access (HSPA) network reliability in different suburban environment scenarios. In this regard, radio frequency signal propagation measurement was first conducted using mobile drive test investigation procedure in hilly, open and residential terrains. By using regression analysis on the RF field data, the long term attenuation pattern of the measured signal power was obtained and the power decaying propagation exponent varied between 2.50 and 3.03. From the characterized pathloss model parameters obtained in the measurements, the HSPA link reliability has been evaluated using the Packet Error rate outage (PE-Outage) probability analysis. Furthermore, the impact of signal power variability on the user equipment terminal has been quantified with and without shadow fading. The results showed that shadow fading can have a significant impact on network reliability. The simplified approach adopted can be useful for a methodical evaluation of system reliability in similar mobile broadband networks deployed in more challenging environments.

The phenomenon of uplink/downlink (UL/DL) link imbalance in 3G High Speed Packet Access (HSPA+) Heterogeneous Networks (HetNet) presents one of the main challenges in HetNet deployments. In this paper we describe the impact of the imbalance on system behaviour and quantify the amount of affected user equipments (UEs) in the Strong Imbalance Zone (SIZ).