Search

The SKB GroundWater Flow and Transport of Solutes Task Force is an international forum in the area of conceptual and numerical modeling of groundwater flow and solute transport in fractured rocks relevant for the deep geological disposal of radioactive waste. Two in situ matrix diffusion experiments in crystalline rock (gneiss) were performed at POSIVA’s ONKALO underground facility in Finland. Synthetic groundwater containing several conservative and sorbing radiotracers was injected at one end of a borehole interval and flowed along a thin annulus toward the opposite end. Several teams performed predictive modeling of the tracer breakthrough curves using “conventional” modeling approaches (constant diffusion and sorption in the rock, no or minimum rock heterogeneity). Supporting information, derived from small-scale laboratory experiments, was provided. The teams were free to implement different concepts, use different codes, and apply the transport and retention parameters that they considered to be most suited (i.e., not a benchmark exercise). The main goal was the comparison of the different sets of results and the analysis of the possible differences for this relatively simple experimental setup with a well-defined geometry. Even though the experiment was designed to study matrix diffusion, the calculated peaks of the breakthrough curves were very sensitive to the assumed magnitude of dispersion in the borehole annulus. However, given the very different timescales for advection and matrix diffusion, the tails of the curves provided information concerning diffusion and retention in the rock matrix regardless of the magnitude of dispersion. In addition, although the task was designed to be a blind modeling exercise, the model results have also been compared to the measured experimental breakthroughs. Experimental results tend to show relatively small activities, wide breakthroughs, and early first arrivals, which are somewhat similar to model results using large, QC 20220608

The SKB GroundWater Flow and Transport of Solutes Task Force is an international forum in the area of conceptual and numerical modeling of groundwater flow and solute transport in fractured rocks relevant for the deep geological disposal of radioactive waste. Two in situ matrix diffusion experiments in crystalline rock (gneiss) were performed at POSIVA’s ONKALO underground facility in Finland. Synthetic groundwater containing several conservative and sorbing radiotracers was injected at one end of a borehole interval and flowed along a thin annulus toward the opposite end. Several teams performed predictive modeling of the tracer breakthrough curves using “conventional” modeling approaches (constant diffusion and sorption in the rock, no or minimum rock heterogeneity). Supporting information, derived from small-scale laboratory experiments, was provided. The teams were free to implement different concepts, use different codes, and apply the transport and retention parameters that they considered to be most suited (i.e., not a benchmark exercise). The main goal was the comparison of the different sets of results and the analysis of the possible differences for this relatively simple experimental setup with a well-defined geometry. Even though the experiment was designed to study matrix diffusion, the calculated peaks of the breakthrough curves were very sensitive to the assumed magnitude of dispersion in the borehole annulus. However, given the very different timescales for advection and matrix diffusion, the tails of the curves provided information concerning diffusion and retention in the rock matrix regardless of the magnitude of dispersion. In addition, although the task was designed to be a blind modeling exercise, the model results have also been compared to the measured experimental breakthroughs. Experimental results tend to show relatively small activities, wide breakthroughs, and early first arrivals, which are somewhat similar to model results using large

In such an integrated system, 2D finite elements may be used to simulate fracture and fracture network and 3D ones to rock matrix to increase the computational efficiency.

This paper compares numerical modeling of the effect of stress on solute transport (advection and matrix diffusion) in fractured rocks in which fracture apertures are correlated with fracture lengths. It is mainly motivated by the performance and safety assessments of underground radioactive waste repositories. Five research teams used different approaches to model stress/deformation, flow and transport processes, based on either discrete fracture network or equivalent continuum models. The simulation results derived by various teams generally demonstrated that rock stresses could significantly influence solute transport processes through stress-induced changes in fracture apertures and associated changes in permeability. Reasonably good agreement was achieved regarding advection and matrix diffusion given the same fracture network, while some observed discrepancies could be explained by different mechanical or transport modeling approaches., QC 20200921